File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
 I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008. 
I am getting details of file screen audit in Event log  , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit  , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

Similar Messages

  • BI Publisher Word Template The report does not contain any data fields.

    I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
    Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
    2. Oracle BI Publisher -> Open (I open the report)
    3. Go to Insert -> Table Wizard
    I get this error:
    The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
    Please help

    Hi
    How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
    Please clarify
    Thanks

  • Stack file that is generated does not contain any java components

    We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
    Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
    ++++
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    SID................: EA4
    Hostname...........: wipro
    Install directory..: e:/usr/sap/EA4
    Upgrade directory..: F:\EHPI\java
    Database...........: Oracle
    Operating System...: NT
    JDK version........: 1.6.0_07 SAP AG
    SAPJup version.....: 3.4.29
    Source release.....: 700
    Target release.....: 700
    Start release SP...: $(/J2EE/StandardSystem/SPLevel)
    Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
    Current usages.....:
    ABAP stack present.: true
    The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
    com.sap.sdt.ucp.phases.PhaseException
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    PREPARE_JSPM_QUEUE
    INIT
    NetWeaver Enhancement Package Installation
    SAPJup
    Java Enhancement Package Installation
    ++++++
    PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
    Jun 28, 2010 9:21:23 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
    Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack  queue preparator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
    Jun 28, 2010 9:21:24 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
    Jun 28, 2010 9:21:24 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    ++++++++++++++++++++++
    [stack xml data: version=1.0]
    [SPAM_CVERS]
    ST-PI                         2005_1_7000006
    LSOFE                         600       0015
    SAP_AP                        700       0015
    SAP_BASIS                     701       0003
    SAP_ABA                       701       0003
    SAP_BW                        701       0003
    PI_BASIS                      701       0003
    PLMWUI                        700       0002
    SAP_APPL                      604       0002
    EA-APPL                       604       0002
    SAP_BS_FND                    701       0002
    EA-IPPE                       404       0002
    WEBCUIF                       700       0002
    INSURANCE                     604       0002
    FI-CA                         604       0002
    ERECRUIT                      604       0002
    ECC-DIMP                      604       0002
    EA-DFPS                       604       0002
    IS-UT                         604       0002
    IS-H                          604       0003
    EA-RETAIL                     604       0002
    EA-FINSERV                    604       0002
    IS-OIL                        604       0002
    IS-PRA                        604       0002
    IS-M                          604       0002
    SEM-BW                        604       0002
    FINBASIS                      604       0002
    FI-CAX                        604       0002
    EA-GLTRADE                    604       0002
    IS-CWM                        604       0002
    EA-PS                         604       0002
    IS-PS-CA                      604       0002
    EA-HR                         604       0005
    SAP_HR                        604       0005
    ECC-SE                        604       0002
    [PRDVERS]                                  
    01200314690900000432SAP ERP ENHANCE PACKAGE       EHP2 FOR SAP ERP 6.0          sap.com                       EHP2 FOR SAP ERP 6.0                                                    -00000000000000
    01200314690900000463SAP ERP ENHANCE PACKAGE       EHP4 FOR SAP ERP 6.0          sap.com                       EHP4 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900001296                                                            sap.com                                                                                +00000000000000
    01200615320900001469SAP ERP ENHANCE PACKAGE       EHP3 FOR SAP ERP 6.0          sap.com                       EHP3 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01                                           +00000000000000
    [SWFEATURE]                                                                               
    1                   01200615320900001296SAP ERP                       2005                          sap.com                       SAP ERP 6.0: SAP ECC Server
    19                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
    20                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Media
    21                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
    23                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
    24                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
    25                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
    26                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
    30                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
    31                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
    33                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
    37                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
    38                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
    42                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
    43                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
    44                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
    45                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
    46                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
    47                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
    48                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
    55                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
    56                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
    59                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
    69                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
    9                   01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
    ++++++++++++++++

    Though we have configured Java in solution manager the stack file that is generated does not contain any java components
    You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
    Nelis

  • Managed System Configuration ! The table does not contain any data !

    Hi,
    In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
    There is no Product Version and Product Instance Available.
    The message is :  " The table does not contain any data "
    How can correct this problem ?
    Thanks

    Hi,
    while creating new Logical Component via SMSY , you need to specify Product first.
    e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
    once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
    Please check and let us know if issue still persits.
    Thanks,
    Rupali

  • Corresponding table in the source system does not contain any data -URGENT

    Hi Guru's,
    I have already uploaded master data.
    I have created infosource added infoObjects to it and activated it to create communication strucure.
    M using RSA1OLD transaction.
    and assigned datasource to infosource ie source system name and clicked ok.
    save datasource to infosurce assigned msg displayed, clicked ok.
    transfer rules r created, i have also created update rules and assigned infosource to it.
    then created infopackage n added execel file name .csv
    in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
    everything is fine upto schedule n in monitor it does not display any data.
    what will be the problem??

    i have also created update rules and assigned infosource to it.
    then created infopackage n added execel file name .csv ??
    Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
    In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
    In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
    Thanks..
    Shambhu

  • ReportViewer control used with a remote report does not display any data.

    Hi there,
    I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
    and it needs to impersonate the caller's identity because the database uses Windows Authentication.
    Here is the code I use:
    var reportViewer = new ReportViewer();
    // Set Processing Mode
    reportViewer.ProcessingMode = ProcessingMode.Remote;
    // Set report server and report path
    reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
    reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
    // set the credentials
    reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
    // create report parameters and set them in the report
    var param1 = new ReportParameter("First_Param", "Some string");
    var param2 = new ReportParameter("Second_Param", "Some other string");
    reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
    using (var reportForm = new ReportForm(reportViewer))
    reportForm.ShowDialog();
    The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
    public ReportForm(ReportViewer reportViewer)
    InitializeComponent();
    try
    this.reportViewer = reportViewer;
    reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
    reportViewer.Dock = DockStyle.Fill;
    reportViewer.ZoomMode = ZoomMode.Percent;
    reportViewer.ZoomPercent = 100;
    reportViewer.RefreshReport();
    catch (Exception exception)
    MessageBox.Show(exception.Message);
    Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
    Any suggestions?
    TIA,
    Ed

    Good to know CR doesn't like joins of Stored Procedures to something else.
    But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
    In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
    And by just adding some spaces in between, my report works fine again ?!
    Strange, strange, strange,....

  • CAT2 Time sheet does not contain any data on PPMDT

    Hi Experts,
    I have submitted my timesheet through CAT2 ,this timesheet data is triggered and go throught the task 'TS31000007' .
    but when i open tcode PPMDT ,i am able to see my my timesheet in manager desk.
    issues is when manager was click on timesheet to do some action,Manager got the message like  'no data found'.
    Please help me here,if anyone accross this situation.
    Thanks in advacne.
    Regards,
    Kiran J

    Sounds to me like an authorisation issue. Maybe follow up with your security/authorisation team?

  • ITunes 9.2 XML file does NOT contain any iBooks information

    I have a little script that I have that generates a webpage to list what is in my iTunes library. I noticed that the XML file does not contain ANY information about iBooks or PDFs that you import. Any idea why that is? If my main library file gets corrupt, and I have to use the XML file to rebuild, I would lose all the iBook information....
    Seems like a oversight by the iTunes people

    why did Apple even make an XML file in the first place as initially most things in iTunes (following your logic) would be purchases from the iTunes store.
    Incorrect. The existence and use of iTunes significantly predates the existence of the iTunes Store. iTunes was initially designed to get its content from CDs. The XML file was for use by other apps such as iMovie or third-party apps to have access to the iTunes library so as to be able to locate tracks and playlists for use in the app.
    Anyway, I'm not interested in arguing with you about the matter.
    Apple, plus put iBooks stuff in the XML file!
    http://www.apple.com/feedback

  • Spool file does not contain any text when PDF is printed

    When we print some PDF files via Adobe Reader, the printjob does not contain any text.
    In Adobe Reader I can select the text but when you print it, it prints it as images (polygons records in EMF) instead of text (e.g. EMR_TEXTOUT).
    Two questions:
    How can we make sure that Adobe Reader always prints text?
    On what is the decision based in Adobe Reader to print the PDF document as an image or as text?

    Well we are looking for this information, otherwise we would not have asked this question. I really hope to get in contact with a Adobe Reader printing specialist who could give us these answers.
    There must be something that decides to print as image or with text.
    E.g. Adobe Reader 9 often prints text compared where Adobe Reader XI doesn't print the text for the same PDF.

  • Get an Error window, The source folder does not contain any supported camera raw files

    I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
    I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
    Esther

    Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

  • Report painter execution error - GR657 - set does not contain any entries

    Hello,
    During our execution of report we are getting the below error:
    Set 0102PCBT1IPROVDIV in set 0002$ZA13#######ROW0236 does not contain any entries
    Message no. GR657
    Diagnosis
    You cannot use empty sets to define reports.  The single-dimension set contains a basic set that does not contain any values.
    Procedure
    Use a set that contains at least one value, or enter values for the set defined.
    This has been discussed in a similar Thread in May 2010 by puri & Praveen Jagdeesan,
    However I am unable to trace the set & how to delete the blank values.
    0002$ZA13#######ROW0236 or ROW0236 in the system.
    Set 1IPROVDIV is exisitng in system.
    Also when we go to KAH3 - Cost element hierarchy & see in the where used list we are not able to see the set being used in the report whereas the system from where we have exported the report we can see that this set is being used in the report.
    Please could you help in resolving the same.

    Hello Murali,
    Thanks for the reponse. But set 0002$ZA13#######ROW0236 is not available in system.
    Please could you guide me on the same.
    Thanks & Regards
    Shreenath

  • Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

    Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files. 

    Hi,
    Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
    Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
    Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
    If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
    a. OAB generation in Mailbox:
    \\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
    b. OAB distribution in Client Access:
    \\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Workbook does not contain any input-ready variables

    Hello Experts,
    We have one workbook which is not reacting when click on REFRESH or SHOW VARIABLE.
    If clicked on VARIABLE screen it is throwing error "The workbook does not contain any input-ready variables" (screenshot attached)
    Points I have checked are as below
    1. If I create a new workbook by executing the respective query and refresh then it is working.
    2. The file is in xls format and I have checked the USE XLS format under Global setting.
    3. My Excel version is 2010. SAP version is SAPKW70105. BEx 7.X, support package 8.
    4. It is not authorization issue otherwise the issue would have happened for the new workbook I created for testing.
    5. Also I tested with user ID with SAP ALL access.
    is there any way to repair the workbook so that it respond to Variable and refresh options ?
    Thanks,
    Gopi R

    Work book might be corrupted  : As other said need to create / Recover Old work book
    Refer Below  Doc  process For   recovering a  corrupted workbook :
    How to recover a corrupt workbook.

  • ITunes Artwork Screensaver "Your iTunes Library does not contain any songs

    i have been using the iTunes Artwork Screensaver on my 1.25GHz PowerPC G4, running Leopard 10.5.2 and it has worked perfectly, showing all my album artwork. i got all the album covers from amazon.com or google. i have always kept my iTunes Library on my Boot Drive and have never moved it.
    Yesterday when my computer went into screensaver mode (itunes artwork) the message "Your iTunes Library does not contain any songs with artwork"!
    This is really strange, as all the albums in my library have artwork. i have also tried deleting the iTunes Artwork Screensaver preference file.
    I know that there are many issues with the artwork screensaver, but i have not found a solution to this problem.
    I would appreciate anyones help!

    i'm glad to see that i'm not the only one with this problem. i have seriously tried everything, like deleting the preference files of the itunes screensaver, using a script to embed the artwork, repairing disc permissions but i the screensaver just won't work. the message that my library does not contain any artwork still appear every time.

  • ORA-00339: archived log does not contain any redo

    Hi All,
    recently we faced 'ORA-00339: archived log does not contain any redo' issue at standby side,
    after searching on Google and from Metalink (note 30866.1 and 7197445.8 ) I find out that this is the known issue for 10g and below versions, our's is 11.2.0.3,
    Error in Alert Log :
    Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
    ORA-00339: archived log does not contain any redo
    ORA-00334: archived log: '/redolog2/redo/redolog3a.log'
    Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc (incident=190009):
    ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
    Incident details in: /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/incident/incdir_190009/DWPRD_pr0a_48412_i190009.trc
    Use ADRCI or Support Workbench to package the incident.
    See Note 411.1 at My Oracle Support for error and packaging details.
    Slave exiting with ORA-10562 exception
    Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
    ORA-10562: Error occurred while applying redo to data block (file# 1, block# 56702)
    ORA-10564: tablespace SYSTEM
    ORA-01110: data file 1: '/oradata1/database/DATAFILES/system01.dbf'
    ORA-10561: block type 'TRANSACTION MANAGED DATA BLOCK', data object# 2
    ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
    Mon Apr 15 11:34:12 2013
    Dumping diagnostic data in directory=[cdmp_20130415113412], requested by (instance=1, osid=48412 (PR0A)), summary=[incident=190009].
    Thanks

    Hi,
    "The archived log is not the correct log.
    It is a copy of a log file that has never been used for redo generation, or was an online log being prepared to be the current log."
    "Restore the correct log file."
    Can you say, what is last changes on your database, On log files?
    Did you copies your '/redolog2/redo/redolog3a.log' log file from other ?
    Regards
    Mahir M. Quluzade

Maybe you are looking for

  • Printer corrupted ~~ need help to identify source

    I somehow inadvertently answered "yes" to a dialogue box that popped up while starting to print~~something I had never seen before and I responded too quickly~~and I have never been able to print since. The error message I get is: "file:/localhost/Us

  • Iweb &  photo viewers

    Hi I have built a website using iweb 08, its only a start...( http://www.wildlifeinpix.com ) I have not uploaded many photo's yet but watch this space!! I have looked at other photography sites and I quite like some of the photo viewers that I see us

  • Since the update today I my screen seems to be locked. There is a picture of the itunes icon and a plug and I can't accress anything!

    Since the latest update this morning, 8.1.3, my ipad 2 is not working. All I have is a picture of the iTunes icon and an arrow pointing to the connection. Nothing happens at all. I have tried switching of and on again and connected to iTunes but noth

  • Checking the CRLDP??

    Hi again folks, This is kind of related to my previous post about inspecting digital certificates, but my question now focuses more on how to go about checking the CRL (Certificate Revocation List) via the CRLDP (Certificate Revocation List Distribut

  • Help with turning off in-camera selected aspect ratios - Please!

    I shoot a Olympus e-P2. It allows me to change the aspect ratio of the file i.e. 4:3, 16:9 etc. I like to use this feature as 'masks' when I shoot to help with composition. When I open the RAW file in bridge or Camera Raw, this pre-selected aspect is