File sender adapter: archiving not possible with transp.prot "filesystem,

Hi XI gurus,
in my FILE sender adapter I want to archive the processed files to a separate sub-directory of the "in" directory.
It works if I use transport protocoll "FTP" with a specific user
but it don't works when I use transport protocoll "file system (NFS)".
the xi user has all permission on the directories.
file system is on a UNIX machine.
Has anybody an idea why archiving only works with transf.protocoll FTP ?
Thanx very much in advance
regards
Hans

Hi,
Check this thread for same problem Re: NFS Sender File Adapter Source Directory
Thanks!

Similar Messages

File sender adapter is not working

Hello All,
We are facing a problems with file sender adapter. Communication channel is not picking the files from the directory, but the status in RWB for that channel is 'Functioning'. We are not sure whether the channel is locked or any other problewm with adapter. (In Alternate option, we have created copy of that channel and when it is activated, it picked the file )
Can anyone help us how to identify whether channel is locked and any other solutions in this case.
Regards,
Sreenvias.

Hi Srinivas,
The file adapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender file adapters as well. I would recommend to do a check in al sender file communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for file adapter ( with name $XIAFFileAdapter) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your file based interfaces. Hence i would suggest to use Timeout parameter avialable in file sender adapter which termiates FTP session as you defined, This should solve your issue permanently.
The FTP server do have thier own time out settings but if you don't defne any particulat time out in PI, the FTP server forcefully disconnects the FTP sessions which created locks in PI.
Hope this solves your issue.
PS: The same bahaviour would expected for all sender JDBC adapter as well

File sender adapter and content conversion with polish character

We are loading a csv file with PI 7.0 file sender adapter using "content conversion" - all fields go through EXCEPT a special character hex '208C' (space in front) looks like "Æ" is converted to hex 'C28C'.
We are using code page UTF8
We are using:
enclosuresign "
enclosuresignescape ""
fieldcontentformatting nothing
enclosureconversion NO
Hope some one can help

Hi Bohamo,
Hope you have set the following for your file sender adapter :
1. Transfer Mode is set to Binary,
2. File Type Text,
3. Encoding ISO-8859-1( for Western European Latin ).
Inorder to recognize Polish Character, try as follows :
Your sender file after coming into Pi has XML encoding declaration 'UTF-8'.
Write a simple XSLT mapping to change the value of the attribute "encoding" to "ISO-8859-1" in the output XML of message mapping . Include this XSLT map as the second mapping step in your interface mapping.
First step in your interface mapping will be your already existing message mapping.
An example of the XSL code :
<?xml version='1.0'?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method='xml' encoding='ISO-8859-1' />
<xsl:template match="/">
<xsl:copy-of select="*" />
</xsl:template>
</xsl:stylesheet>
or you can also do java mapping if you are comfortable with java code !
Cheers,
Ram.

File sender adapter (FTP) - processing mode "Archive"

Hello all
We're polling files from an external FTP server. For this I created a scenario on XI according to this thread:
When setting processing mode to "Archive" in the file sender adapter (ftp) it polls the file, stores it to the archive directory I specified and then tries to delete the file on the FTP server side. This returns me an error because we're not allowed to delete the retrieved files on the FTP server!
Because of this error the file adapter stops further processing and does not poll all the other files.
How can I disable this deletion mechanism while keeping processing mode to "Archive"?!?!?
We do not want to use processing mode "Delete" or "Test" and we don't see other options to influence this behaviour.
Thanks for any guideance on this one in advance!
Kind regards,
Renaud

Hi Bhavesh
Sorry for the late answer. Unfortunately I can't ask the application system to provide file names containing a timestamp within. The files are provided by an external partner and are retrieved by several others as well.
In the meantime I managed to achieve this:
In repository I created dummy data types, message types and message interfaces. No mapping programs and interface mappings!
In configuration I created the necessary communication channels (1 ftp sender, 1 file receiver) and the required receiver and interface determinations as well as the sender and receiver agreements.
The result of this is:
I'm able to poll some specific files via ftp from remote host. The file names are file1.arj, file2.arj, file3.arj and file4.arj. All 4 files have the same SourceFileTimestamp (e.g. "20060727T053900Z").
I'm able to store those 4 files 1:1 in a target directory with the same file names. Until here I did NOT need to follow this blog: <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>.
As of this blog it is possible to access adapter specific attributes and make them available in message mapping using user defined functions. This way I'm able to get the SourceFileTimestamp from the polled files and use it in a message mapping. This way I'm also able to use it in variable substitution on file receiver adapter (syntax = "payload:root,1,fileTS,1") in order to dynamically create a directory with this syntax: YYYYMMDD.
So far so good... but the only remaining BIG problem now is, that as soon as the mapping is activated and assigned in the interface determination, the created files contain the XML payload instead of the original binary content. Where has it gone? How should the target message type look like so that it can carry over the original binary file content?
BTW: isn't it possible to post screenshots? Would be much more easier to explain things... so sorry to anyone if I wasn't clear enough!
TIA and best regards,
Renaud

Error Archiving File in File Sender Adapter using AF_Modules/PayloadZipBean

Hi everybody.
I have to pick a zip file up from ftp server, unzip an convert the file in xml.
Im using this modules in file sender adapter:
AF_Modules/PayloadZipBean --> To unzip de file
AF_Modules/MessageTransformBean --> file to xml
The problem is when I try to archive de file. Im getting this error and I dont know why (This path exists /out/ProcesadosSinError/)
Could not archive file 'test.zip' as '/out/ProcesadosSinError/20100518-091029-155_test.zip' after processing: java.io.FileNotFoundException: /out/ProcesadosSinError/20100518-091029-155_test.zip (A file or directory in the path name does not exist.)
Could it be that is not possible to archive with AF_Modules/PayloadZipBean?
Thank u so much

Hi Stefan.
Absolutely. This path exists. It's an absolute path from root. I can´t understand the error!!!!
Thanks!!!
Edited by: Christian Abad Chico on May 18, 2010 9:35 AM

Is it possible get special file in file sender adapter?

Hi every SDNer.
I want to get special file. for example like PJ<today>_return.dat
Well, to paraphrase Marx, One folder has too many files. but I want one file in that folder.
The rule is simple. if today is 20/07/2007 then I get the file as "PJ20070720_return.dat".
How can i configuration File Sender Adapter?

Dont have an XI system in front of me, but if I recall correctly, your options are pretty limited. The list of parameters in Advanced Selection for Source File does not include a date Better selection parms with the receiver channels.
As such you may have to resort to writing a script on the OS that will do the following every minute... (basically run it more frequently than your channel)
- look in that directory through all the PJ* files containing date = 'today'
- rename the file to REAL_PJ_..... (for example)
In your channel, pick the file REAL* and archive accordingly so it's not picked again by your script.
If you find alternatives via cchannel - publish your results.
sincerely,
--NM

Cant do a file get from external server using file sender adapter with ftp

Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
Mike

Thanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg /Folder/Subfolder the error message is as follows
EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg Folder/Subfolder a different error message is returned
Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike

File Sender Adapter - File overwritting in the Archiving folder

Hello Experts,
I am doing File sender to proxy Receiver Async Scenario.
In File Sender adapter, i am using the Archiving option by spacifying the
Archiving path.
Files are picked up and archiving happen successfully.
Problem is: - once the File is picked up and archivied into the Archiving location
If end user again rectifies some data in the same file and place it in the source directory
then i am getting the following error in RWB Commu. channel monitoring.
Failed to archive file 'File1.TXT' as '/Input File location/File1.TXT' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 File not renamed. File already exists. You may delete the existing file and then rename.u2019 For details, contact your FTP server vendor.
I know this is because of File sender adapter is trying to archive the file with the same name(File1.txt) in the archiving location.
My Question: - Is there any option to allow the File sender Adapter for overwritting the
File in the archiving location.
Thanks & Regards
Jagesh

check if there is proper rights to over write files in the archive folder.
The problem seems to be that the rights/authorization is not there. Else the adapter usually overwrites files in the archive folder unless you use the timestamp option.
Archive
Files that have been successfully processed are moved to an archive directory.
u25A0       To add a time stamp to a file name, select the Add Time Stamp indicator.
The time stamp has the format yyyMMdd-hhMMss-SSS. The time stamp ensures that the archived files are not overwritten and it enables you to sort them according to the time that they were received.
u25A0       Under Archive Directory, enter the name of the archive directory.
u25A0       If you want to archive the files on the FTP server, set the Archive Files on FTP Server indicator. If you do not set the indicator, the files are archived in the Adapter Engine file system.

Pick up a specific file with File Sender Adapter.

Hi guys,
I would like to know how I can pick a specific file in a file pool (folder)? I would like to choose this file by name, like FileA or FileB, etc.
Im asking this because I have an asynchronous file scenario (BPM) with a receiver adapter that put the File with a specific name (variable substitution) in a folder.
And I would like to do something like this:
In another asynchronous scenario (BPM), a File sender adapter picks up this specific file (using the name). The correlation is made trough an IDOC that XI receives before pick up the file, this IDOC has payload field with the name of file to be picked.
Is it possible receives the IDOC, read the field with the name of the file to be picked and choose this specific file? In a Sender File Adapter how I can do something like variable substitution like receiver adapter does.
Thanks in advance,
Ricardo.

Hi,
Is it possible receives the IDOC, read the field with the name of the file to be picked and choose this specific file? In a Sender File Adapter how I can do something like variable substitution like receiver adapter does.
No this is not possible. The only dynamic thing you can do is use wild card characters like *.
So, maybe you can pick a file like . or AA. and so on...
Regards,
Bhavesh

File sender adapter: trigger mail if file is not there

Hi,
I have an scenario where I have a file sender adapter, and I need to look for a file in a specific folder from a specific FTP site.
If the file is not present there, I need to trigger an alert to let some people know that the file was not found.
Is this possible? If so, how should I do it?
Thanks!

You could also write an abap in your PI system to call the function 'EPS_GET_DIRECTORY_LISTING' against the FTP site/folder/filename(s) at a required interval if you don't want to use a BPM. This abap could also send an email if you so desired.
The general theory should be that if you can do something a simpler way then don't use BPM's if you can avoid them.

How to ignore columns in CSV File with File Sender Adapter

Hi,
I have a CSV File that I need to load with XI. The File contains 10 columns but I only need the data from 3 columns, let's say column 1,4 and 7. Can I configure the XI File Sender Adapter in a way that it only loads the data for the required columns and ignores the rest?
Thanks in advance.
Alex

Alex,
Dont think so. Why not create Dummy fieldName for these columns you want to ignore.?
Regards
Bhavesh

File Sender adapter with File content conversion

Hi
I'm having problems picking up a flat file that has some junk characters in the file.
I'm usign a file sender adapter with file content conversion. The adapters shows the following error-
Conversion of complete file content of to XML format failed around position 0: sun.io.MalformedInputException
this is the sample data with junk char's -
A20099201009999009999060815160505051700130008151vÿÿÿÿ³ r 0OK0476 31N016227241915840IV 00840 ÿÿÿ ÿ ÿÿÿÿÿÿÿÿ ÿ ÿÿÿ
There is not much in the file content conversion. This is a fixed length file, I'm just pickign it up & passing it to an inbound proxy. All my processing is in the proxy.
I'd appreciate any suggestions.
Thanks
Rachana

Hi Rachana,
Do you use a specific "encoding" like UTF-8 or ISO-8859-1 in your Sender CC?
To be simple, Encoding is linked to country, you can find all "iso-nnnn" via google or some of them in sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Moreover, with your source file opened thanks to Notepad (for instance), use option "save UNDER", you will the encoding use by your file
Mickael

File Sender Adapter with FTP protocol

Hi,
I implementet a file sender adapter with FTP protocol. There is a problem: the sender processes the files even if they're in use by another application.
I.E. If another application put files (via ftp) in the sender work directory (that is on ftp), the sender processes those files before their transfer is completed.
I don't want that this sender in a communication channel in PI 7.1, imports files in the system when they aren't completed yet.
There are some ways to block sender before it processes incompleted files (in an ftp)?
Thanks
Matteo

Hi,
File sender adapter provides a check for NFS mode
+Check this
To specify additional parameters in the adapter configuration, set the Advanced Modeindicator.
● Msecs to Wait Before Modification Check
Enter the number of milliseconds that the adapter must wait before it checks whether the files have been changed.
This parameter is not available if you have selected File Content Conversion as the Message Protocoland then made an entry under Recordsets per Message that splits an input file into several messages.
This parameter is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.+
Other approach can be to apply OS level checks
Regards
Suraj

File Sender adapter not reading the first line

Hi,
I have a scenario configured from file to jdbc adapter.
However, I found a problem in my file sender adapter. My file adpater always not picking up the first line from my text even I have set the 'Document Offset' to 0.
Any Ideas? Thanks.
Regards,
Pua

Hi Latika Sethi,
My complete input text file is as below, it contains only 2 testing records:-
H1|DIZ1 |A0016507 |10000020|09/2007
H2|ABC0001
D|P|0001|Gaji Pokok | 1,000.09
D|D|0002|Denda | 1,000.00
D|P|0003|Elaun | 1,000.00
H1|PUA1 |A0016508 |10000021|09/2007
H2|ABC0002
D|P|0001|Gaji Pokok | 2,744.09
D|D|0002|Denda | 2,000.00
D|P|0003|Elaun | 2,000.00
After the message mapping, I found the pipeline existed in sxmb_moni as below:-
<?xml version="1.0" encoding="utf-8"?>
<ns:mt_rmp03B_filejdbc_sender xmlns:ns="urn:rmp03:pdrm:ips:jdbcjdbc">
<PaySlip>
..<Header2>
.... <IC>ABC0001</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>1,000.09</Jumlah>
.. </Details>
</PaySlip>
<PaySlip>
.. <Header1>
.... <Nama>PUA1</Nama>
.... <KWSP>A0016508</KWSP>
.... <NoGaji>10000021</NoGaji>
.... <Bulan>09/2007</Bulan>
.. </Header1>
.. <Header2>
.... <IC>ABC0002</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>2,744.09</Jumlah>
.. </Details>
</Payslip>
There are 2 payslips as for the top payslip node...Header1 tag is missing. It means that during the file sender step....the first line of my record which is :-
"H1|DIZ1 |A0016507 |10000020|09/2007"
is not read into the xi pipeline. Basically this is the problem i faced.
Has somebody facing the same problem before? Currently I have no choice but moved the First line of the text into Second line and left the first line of the text become null/ empty line. As such both records can be successfully read by the XI.
However what I wondered is sometimes clients will do insert the records into the first line and this might made some data loss.
Thanks...

How to handle flat file with variable delimiters in the file sender adapter

Hi friends,
I have some flat files in the ftp server and hope to poll them into XI, but before processing in XI, I hope to do some content conversion in the file sender adapter, according to the general solution, I just need to specify the field names, field seperator, end seperator, etc. But the questions is:
The fileds in the test data may have different amount of delimiters (,), for example:
ORD01,,,Z4XS,6100001746,,,,,2,1
OBJ01,,,,,,,,,,4,3
Some fileds only have 1 ',' as the delimiter, but some of them have multiple ','.
How can I handle it in the content conversion?
Regards,
Bean

Hi Bing,
Plz do refer the following blogs u will get an idea:
File content conversion Blogs
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Vinod.

File sender adapter: archiving not possible with transp.prot "filesystem,

Similar Messages

Maybe you are looking for