FILE SENDER COMMUNICATION CHANNEL DOESN'T GET FILE

Hi,
I have create a new sender communication channel with ftp file configuration. Server parameter and source directory are correct.
I have also checked file and directory permission (chmod 777)
Poll interval is 600 secs.
There is no error in communication channel monitor (returned log: CC is correctly configured and started).
Process started every poll interval, but no file is picked up.
Why?
Carme

Hi,
What type of file are you processing. Check whether the file type is binary or text mode.
Also check whether the file name you have specified in the CC and the exact file in the directory are the same.
Also check the file processing mode, whether it is read only, delete or in test mode.
If the file is in read only mode when the file first processed, then once the file was processed it would be in read only mode, so if you place the new file it should process, so try deleting the existing file in the directory and place a new file with exact file name along with the correct extension and try to process it.
Also I would suggest you check the exact file extension, by unchecking the radio button in the folder option under the menu tools> Folder options> view-->hide extension for file type.
Regards,
Nithiyanandam

Similar Messages

BIC Module Error in Sender Communication channel for EDI to File scenario.

Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
Abhishek

Hi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish

File sender communication channel stop working

Hi Guru,
I have a file sender communication channel. It usually works good. But sometimes it just stop working. And In RWB, it shows no error. If I stop it and restart it in RWB, it immediately works again. This happens once a while. Any ideas?
Thanks,
Meiying

Hi,
option 1--
Do some dummy changes and activate channel and try and perform cache refresh.
If still not working then stop and restart SFTP service,if still no luck then restart JAVA stack
option 2
try to put timeout value in the channel.
Regards.
Mastan

File sender Communication Channel is not working

Hi friends
we Created File sender Communication Channel and Activated but It is not picking up file
1. 0 messages in Message Monitoring
2. My Communication Channel not appearing in Communication Channel Monitoring also
3. We have refreshed the cache and activated the channel.
we chack with File name, Directory name and path ....
Friends have any idea
Regards
   Viswanadh Vadde

Perosnally, I would recommend setting a trace and letting the system telling you exactly why.
Traces are used to analyze runtime errors. By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments at class and method level. This is done with the help of the log configurator service:
Log onto the Java Admin Console
     Services
     Log Configurator
     Locations
     Choose the location (Java package) and the tracing level (severity)
(for example, com.sap.aii.adapter.file)
     Root Location > com > sap > aii > File
     Set the severity and choose Copy Severity to Subtree

File sender communication channel error

Hi gurus please help me on the below issue ,suddenly my file(sender)communication channle is showing error status stated below error ,it is just simple scenario like file to proxy upto one hour back it is working fine suddenly it is showing below error plz give me the reply im in production suport
Error: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name localejbs/ModuleProcessorBean, cannot resolve object reference. [Root exception is javax.naming.NamingException: Error occurs while the EJB Object Factory trying to resolve JNDI reference Reference Class Name: Type: clientAppName Content: sap.com/com.sap.aii.af.app Type: interfaceType Content: local Type: ejb-link Content: ModuleProcessorBean Type: jndi-name Content: ModuleProcessorBean Type: local-home Content: com.sap.aii.af.lib.mp.processor.ModuleProcessorLocalHome Type: local Content: com.sap.aii.af.lib.mp.processor.ModuleProcessorLocal com.sap.engine.services.ejb3.runtime.impl.refmatcher.EJBResolvingException: Cannot start applicationsap.com/com.sap.aii.af.app; nested exception is: java.rmi.RemoteException: [ERROR CODE DPL.DS.6125] Error occurred while starting application locally and wait.; nested exception is: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5106] The application [sap.com/com.sap.aii.af.app] will not be started, because of the server state is [STARTING]. at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.startApp(DefaultContainerRepository.java:315) at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.getEnterpriseBeanContainer(DefaultContainerRepository.java:106) at com.sap.engine.services.ejb3.runtime.impl.DefaultRemoteObjectFactory.resolveReference(DefaultRemoteObjectFactory.java:55) at com.sap.engine.services.ejb3.runtime.impl.EJBObjectFactory.getObjectInstance(EJBObjectFactory.java:144) at com.sap.engine.services.ejb3.runtime.impl.EJBObjectFactory.getObjectInstance(EJBObjectFactory.java:63) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:77) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:33) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:228) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:283) at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:394) at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:223) at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:242) at javax.naming.InitialContext.lookup(InitialContext.java:351) at javax.naming.InitialContext.lookup(InitialContext.java:351) at com.sap.aii.af.lib.util.ejb.FastEjbFactory.createEjbInstance(FastEjbFactory.java:83) at com.sap.aii.af.lib.util.ejb.FastEjbFactory.createEjbInstance(FastEjbFactory.java:51) at com.sap.aii.adapter.file.File2XI.send(File2XI.java:3451) at com.sap.aii.adapter.file.File2XI.processFileList(File2XI.java:1332) at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java:622) at com.sap.aii.af.lib.scheduler.JobBroker$Worker.run(JobBroker.java:500) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182) at com.sap.engine.core.thread.impl3.SingleThread.run

Hi Thank for your reply Nbendu and sorry for late reply .
My issue was now resolved but i want to know why this is happend i am getting this issue when ever there is any Basis maintaenance Happens.
If it is due to Basis maintnance then with same combination we have 2 more interfaces is there it is not affecting the other .
Any thoughts.
Regards
Madhu

None of the file Sender Communication Channels are wotking in Prod-Urgent

facing a wierd situation, since yesterday all of my File Sender Comm Channels have stopped picking up files.This is in Production and was working fine day before.When I check in Comm channel monitoring the Channels are started and Functioning and also shows me that they are polling for the files.But no file is picked though files exist in the directory.These channels have been working fine since months and nothing had been changed since then.Suddenly all of them stopped picking up files.
I have about 10 Comm Channels that pick files, Is this related to Adapter Engine....any suggestions on this would be really apprecated.
Thank You.

Hi!
Check access rights on your files. Try to set them to 777 (using chmod). Maybe this will help.
Problem is, when the XI does not have rights for picking up files, you see no errror message in CC monitoring and everything seems to be ok, but it is not..
We faced the same problem.. And we figured out, that our partner started to upload files with different access rights.
Peter

Problem in File Sender Communication channel

Dear all,
We have FIle TO RFC scenario, which have been running in Production since long time.
Problem : Many of the time we have obsereved that even if the FTP is up and running , but file is not getting picked from ftp server. File name and all other details are maintained correctly. Can you please suugest me to resolve this issue.
Regards,
Raghvendra

First of all: the connect parameter should be set to 'Per Transfer': this ensures that a new connection to the FTP server is established for each file transfer. That means that you don't loose connection to the FTP server in case of a hick-up.
Second: are there any errors in your communication channel monitoring?

File Sender Communication channel with error

Hi,
One of the File sender CC is in red but shows "Functioning". But in the Process Detail section it just showing
5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:24:00 AM                                                                     Processing started
5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:23:00 AM                                                                       Processing started
5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:22:00 AM                                                                      Processing started
Please let me know is there any error with my channel ot wny is it red then?
There is no Polling step in the Process Details.. Please reply ASAP
Thanks,
Shweta.

The Status of the channel is "Processing Erros in last 20 seconds". And in the processing deatils it just show the below two steps.
5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:24:00 AM                                                                        Processing started
5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:23:00 AM                                                                         Processing started
5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:22:00 AM                                                                        Processing started
It is continuasly showing the same message ID "d28c6542-0d7e-453b-1d96-9e0a18159315 " but this ID does not exist in SXMB_moni not in RTW message monitoring.
If I double click the message ID shown in the CC process details it shoes me below content.
Time Stamp Type Description
2011-05-09 22:03:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
2011-05-09 22:04:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
2011-05-09 22:05:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
2011-05-09 22:06:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
Please tell me what is the problem. there are No java Locks ...I have checked that.
Shweta.

File Sender Communication Channel not working

Hi All,
We have one file sender channel which sends file after every 3 hours.
But currently it has stopped the processing of file.
If we see in RWB it shows that "Correctly configured and started",but if we start and stop the chanel it doesnt show any processing started message.
File is there in the folder but the channel doesnt poll the folder to pick up the file.
We have refreshed the cache and activated the channel again.
But still no luck,does anybody have any idea?

Hi Shweta,
Please check the parameters of your File adapter. There can be following possibility if File adapter is not picking the file :
1. File adapter is not active
2. Incorrect File name, Directory name or path,
3. File does not exist in the source directory.
4. If you are accessing file from other server (use FTP protocol) check you have READ and WRITE access.
Thanks
Farooq.
<b>*Rewards points if you find it useful*</b>

Why my FIle sender Communication channel is inactive?

I tried to edit and save it again, but i can see active at ID but inactive at RWB-->Channelmonitorring..
what to do?

May be in the channel monitoring the channel is stopped. If you are sure that the channel is active in ID and in Start mode in communication channel, then it is a cache issue. Then, perform full CPACache refresh.
Regards,
Prateek

PI sender communication channel not reading files from NFS directory

Hello,
I have a sender communication channel configured to read file from NFS directory which is on ECC server. A program in ECC generates the file and puts it on the ECC server in the output directory. PI sender communication channel is supposed to pickup this file and process it. If I give the NFS path as the source directory, I am getting error: Configured source directory '//Server/DIR/OUT' does not exist. I tried putting '
Server\DIR\OUT' too but same error. Do I have to add the NFS path of ECC into PI as logical path?
Any suggestions?
Thanks,
Sangita

Hello Sangita,
Your ECC server is an external system, therefore you need to activate FTP service in that system and use the transport protocol FTP:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
You can use NFS protocol when you have a local directory in XI server.
Best Regards,
.Luis Bernal.

XI-Multiple instance scenario -File & SQL sender communication channels

Hi
i have a basic question regarding how file sender communication channel ( where we poll for a particular file pattern either using file/ftp types in a particular subfolder ) or a sql sender communication channel - ( selecting records from a sql source ) would work in a scenario with two active XI instances and j2EE file and sql adapter services running on both of the J2EE servers ?
1. How would the file polling from both J2EE servers - avoid a conflict looking for the same file pattern ? Is there any inbuilt mechanism from SAP to make multiple instances work with the file polling - without a confict ?
2. Simlar question for SQL sender type communication channel ?
If SAP does have a mechanism to handle multiple instance scenarios for file and sql sender adapter based communication channels, is there a link/document on this ?

Hi Karthik,
Please see my comments.
I am just wondering aloud - what will happen if we use a select for update clause in the sql sender adapter communication channel -
Gouri: Yes you can use select + update. In fact that is the right way.
will this ensure that polling from one J2EE instance will lock the selected records so that the second instance does not select the same set of records from the sql server ? Or should we not use a select for update and use a simple select statement ?
Gouri: Yes. SQL DB will ensure that same data will not be picked by another node. As I mentioned earlier use serilizable option from advanced mode.
-Gouri

FULL JOIN Error - (ORA-03113: end-of-file on communication channel)

Hello,
well my following query is running fine, no errors but not showing join records from table B and E.
Query is as following:
SELECT D.EMPLOYEE_ID, F.EMP_NAME,
F.COMPANY_ID, F.COMP_NAME, F.BRANCH_ID, F.BR_NAME,
TO_CHAR(F.BIRTH_DATE,'DD/MM/YYYY') DOB,
((NVL(A.PF_OWN,0) + NVL(A.PF_COMP,0) + NVL(A.PROF_OWN,0) + NVL(A.PROF_COMP,0) + NVL(B.PROF_OWN,0) +
NVL(B.PROF_COMP,0) + NVL(B.TOT_PF_OWN,0) + NVL(B.TOT_PF_COMP,0) +
NVL(D.SAL_PF_OWN,0) + NVL(D.SAL_PF_COMP,0) -
(NVL(E.REV_PF_OWN,0) + NVL(E.REV_PF_COMP,0) + NVL(C.WD_PF_OWN,0) + NVL(C.WD_PF_COMP,0) +
NVL(C.WD_PROF_OWN,0) + NVL(C.WD_PROF_COMP,0)))) PF_BALANCE
FROM
(SELECT EMPLOYEE_ID, SUM(PF_OWN) SAL_PF_OWN, SUM(PF_COMP) SAL_PF_COMP
FROM EMPLOYEE.EMP_SAL_DETAILS
WHERE SAL_DATE >= (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE <= '01-DEC-06')
AND SAL_DATE <= '01-DEC-06'
GROUP BY EMPLOYEE_ID) D
LEFT JOIN
(SELECT EMPLOYEE_ID, PF_OWN, PF_COMP, PROF_OWN, PROF_COMP
FROM EMPLOYEE.EMP_PF_OPBALS
WHERE AS_ON_DATE IN (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE <= '01-DEC-06')) A
ON (D.EMPLOYEE_ID = A.EMPLOYEE_ID)
LEFT JOIN
(SELECT EMPLOYEE_ID, SUM(TOT_PF_OWN) TOT_PF_OWN, SUM(TOT_PF_COMP) TOT_PF_COMP, SUM(PROF_OWN) PROF_OWN, SUM(PROF_COMP) PROF_COMP
FROM EMPLOYEE.EMP_PF_PROF_DETAILS WHERE END_DATE >= (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE <= '01-DEC-06')
GROUP BY EMPLOYEE_ID) B
ON (D.EMPLOYEE_ID = B.EMPLOYEE_ID)
LEFT JOIN
(SELECT EMPLOYEE_ID, SUM(PF_OWN) WD_PF_OWN, SUM(PF_COMP) WD_PF_COMP, SUM(PROF_OWN) WD_PROF_OWN, SUM(PROF_COMP) WD_PROF_COMP
FROM EMPLOYEE.EMP_PF_WITHDRAWALS WHERE PF_WDRAW_DATE >= (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE <= '01-DEC-06')
GROUP BY EMPLOYEE_ID) C
ON (D.EMPLOYEE_ID = C.EMPLOYEE_ID)
LEFT JOIN
(SELECT EMPLOYEE_ID, SUM(PF_OWN) REV_PF_OWN, SUM(PF_COMP) REV_PF_COMP
FROM EMPLOYEE.EMP_SAL_REVERSALS
WHERE SAL_DATE >= (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE >= '01-DEC-06')
AND SAL_DATE <= '01-DEC-06'
GROUP BY EMPLOYEE_ID) E
ON (D.EMPLOYEE_ID = E.EMPLOYEE_ID)
LEFT JOIN
(SELECT EMPLOYEE_ID, COMPANY_ID, COMP_NAME, BRANCH_ID, BR_NAME, EMP_NAME, BIRTH_DATE, CONF_DATE FROM V_SEL_SYS_EMP) F
ON (D.EMPLOYEE_ID = F.EMPLOYEE_ID)
ORDER BY D.EMPLOYEE_ID
And when i try to full join my tables and replace LEFT JOIN with FULL OUTER JOIN following errors accurs:
(ORA-03113: end-of-file on communication channel) and oracle gets disconnect.
Query will only show records its tables are FULL JOINED.
Please help what is the solution. Its very urgent also.
I am thankful to you.
Regards,
Imran

> And when i try to full join my tables and replace LEFT JOIN with FULL OUTER
JOIN following errors accurs:
(ORA-03113: end-of-file on communication channel) and oracle gets disconnect.
This is not an error, but a symptom of an error. An ORA-03113 results when the Oracle Server Process that services your client, terminates abnormally. When that server process terminates, the connection (TCP socket) to your client is torn down - without your client knowing about it.
The ORA-03113 is generated by your client's Oracle driver when your client suddenly discovers that the connection to the Oracle Server Process is no longer there.
So why does the Server Process terminate abnormally? Usually due to an internal error (an ORA-600 and/or an ORA-7445).
These errors results in:
- error messages to be generated in the Oracle instance's alert log
- a trace file generated by the server process that includes stack and memory dumps
You need to determine what these errors are, and the use the ORA-600/ORA-7445 Troubleshooter (Metalink Note 153788.1) on [url http://metalink.oracle.com]Metalink to troubleshoot the error, determine whether it is a bug, if there is a patch or a workaround available, etc.
> Please help what is the solution. Its very urgent also.
I do not mind helping out where I can. But I do have a problem with people claiming there problem is urgent, and deserves quicker/better attention that other peoples' problems around here,
If your problem is urgent then you are in the wrong place. I do not get paid to solve urgent problems quickly. I and others, spend our free time providing assistance. You cannot demand any kind of urgent attention from any of us.
If you like urgent and special attention, use Oracle Support.

Error ORA-03113: end-of-file on communication channel in droppping a table

Good evening,
I am very new on Oracle and I have a problem with some tables. Without any reason, apparently, I can't drop some of my table. Oracle gives me this error:
ORA-03113: end-of-file on communication channel
and then close the connection of the user.
What I should have to do?
It is very important.
Thanks a lot
best regards
Anna Zanetti

Good morning, I still have the same problem, I can't drop a table from my database.
The message is again:
Re: Error ORA-03113: end-of-file on communication channel
The alert log file says:
Fri Nov 17 12:27:31 2006
Errors in file /usr/oracle/admin/oracledb/udump/oracledb_ora_4369.trc:
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
and in file oracledb_ora_4369.trc there is:
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0xc, PC: [0x955c61f, 0955C61F]
Registers:
%eax: 0x00000000 %ebx: 0x00012d95 %ecx: 0x58301930
%edx: 0x00000000 %edi: 0x5830d9e8 %esi: 0x00000000
%esp: 0xbfffae1c %ebp: 0xbfffb060 %eip: 0x0955c61f
%efl: 0x00210282
(0x955c61f) movzw 0xc(%eax),%eax(0x955c623) cmp $30,%eax
(0x955c626) jle 0x955c63e
(0x955c628) xor %edx,%edx
(0x955c62a) push %edx
*** 2006-11-17 12:27:31.658
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
Current SQL statement for this session:
drop table fiumiforjoin
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
08856247 call 0885776A 1 ? 0 ? 1 ? 1 ? 0 ? 0 ?
08290320 call 0885605A 3 ? 0 ? 0 ? 0 ? 0 ? 0 ?
0955C61F signal 08290320 B ? BFFFAAB0 ? BFFFAB30 ?
0955D6BE call 0955C61F 5830F01C ? 0 ? FFFFFFFF ? 0 ?
1 ? 5830F01C ?
08DD1EEB call 0955CC22 BFFFB394 ? 0 ? 0 ? BFFFB348 ?
58EAB2B0 ? C ?
09434EF3 call 08DD1A28 BF2A8C4 ? BFFFC0C0 ?
BFFFC0C0 ? 4 ? B6AB0300 ?
B6ABC2E0 ?
094106E0 call 094326D4 4 ? 0 ? BFFFC0C0 ?
093D7BB5 call 0940FEF8 3 ? E ? BFFFC1F8 ? A4 ?
093D630C call 093D7AC4 BFFFCDF0 ? BFFFCD08 ? 17 ?
1 ? 0 ? A4 ?
08293DE6 call 0850FFFF 5E ? 14 ? BFFFCDEC ?
0A1ED44D call 08293DE6 5E ? 14 ? BFFFCDEC ? 0 ?
08292122 call 0A1ECAE4 BF2A8C0 ? 5E ? BFFFCDEC ? 0 ?
BFFFD6E8 ? BFFFD6E4 ?
0941F190 call 0829193C 0 ? 0 ? BF2A8C0 ? BF83090 ?
F1 ? 0 ?
08293DE6 call 0850FFFF 3C ? 4 ? BFFFEB08 ?
08291238 call 082937A8 3C ? 4 ? BFFFEB08 ? 0 ?
0828F403 call 08291012 3C ? 4 ? BFFFEB08 ?
08274A3D call 0828F39C BFFFEAEC ? 3C ? 4 ?
BFFFEB08 ? B6CC017C ?
B6C1A17C ?
__libc_start_main() call 08274A3D 2 ? BFFFEBA4 ? BFFFEBB0 ? 0 ?
+218 B6C1C898 ? B7600020 ?
Any idea of what I have to do?
Thanks for your help..
Best Regards
Anna Zanetti

Regd Sender Communication channel

Hi all,
I have configured a sender communication channel for picking a file. Everything looks fine to me, but the file is not getting picked up.
I checked in RWB for channel, channel is configured fine.its says processing started, and processing finished successfully.No message ID is showing.But the file is not getting picked from the location.
In moni , no messages to display.
can you suggest how to trace out the possible error? the path and file names are perfect, check it number of times.

Hi Anika,
in sender file comm channel, set the processing mode to delete and activate it.............
then in source file system, ask the file system guys to check the file permissions of the source file........it should have read, write, execute for others............
then your source file should be picked.........if still your source file is not getting picked, then ask your basis guys to do a full CPACache refresh using PIDIRUSER and then re-run your scenario......
Regards,
Rajeev Gupta

FILE SENDER COMMUNICATION CHANNEL DOESN'T GET FILE

Similar Messages

Maybe you are looking for