File Server Resources Manager not sending emails

Appears that the SMTP settings are not being set correctly via FSRM. Using 2012 R2
I get the below error in the event log when I try to configure them (via options/email notifications tab). If I click the 'send test email' button I get the test email which tells me my SMTP server is fine. Seems like I'm getting an access
denied message whenever I try to save the SMTP settings. I already tried restarting the server as well as running the FSRM console using the 'run as admin' command.
Source: SRMSVC
EventID: 16401
The following access-denied assistance error configuration was modified:
Error: 5
Enabled: FALSE
Client Display Flags:
Error Message: This can occur if you don't have permission to access the file or folder, or if your computer doesn't meet security policy requirements.
Message from the administrator of the file server:
- Ask your manager if you're in the right security groups
- For troubleshooting information, go to <a href="http://support.microsoft.com">Microsoft Support</a>
If you need more help, click Request assistance.
Email Flags: Put data owner on TO line, Put administrator on TO line, Include device claims, Include user information, Generate an event log when sending mail
Additional To Emails:
Email Message: For general support, contact: [Provide email address]
For share permissions support, contact: [Provide email address]

Hi,
Please try to assign the "Send-as" permission from the adsiedit.msc to the user account.
Is the SMTP server hosted on an Exchange server? If so, I suggest you ask for help from Exchange forums for better and accurate answer to the question.
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdeploylegacy
Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

File Server Resource Manager will not load WMI Objects on Windows 8.0/8.1 Preview with Hyper-V and Server Tools Loaded

Hi Folks,
I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
If there is anything you could share on this problem I would be much obliged.
Thanks again,
Crysta
PhotM Phantom of the Mobile

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

File Server Resource Manager 2012 - Fails to generate storage report - Event ID: 8242 and 602

Installed file server resource manager roll on new 2012 file server.   When I attempt to run a dup report on the local volume, I received an error message: "the report generation task failed with the following errors: Error generating report
job with task name". "
Event ID 8242 and 602 are logged in the event viewer.
Log Name:      Application
Source:        SRMSVC
Date:          6/24/2013 11:11:03 AM
Event ID:      8242
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxxxxxxxxxxxxxxx
Description:
Reporting or classification consumer '' has failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SRMSVC" />
    <EventID Qualifiers="32772">8242</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-06-24T16:11:03.000000000Z" />
    <EventRecordID>1276</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxxxxxxxxx</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>
Error-specific details:
   Error: (0x80131501) Unknown error</Data>
    <Binary>2D20436F64653A20434E534D4D4F444330303030303234332D2043616C6C3A20434E534D4D4F444330303030303231322D205049443A202030303030333036302D205449443A202030303030333734382D20434D443A2020433A5C57696E646F77735C73797374656D33325C73726D686F73742E657865202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820</Binary>
</EventData>
</Event>
Log Name:      Application
Source:        SRMREPORTS
Date:          6/24/2013 11:11:03 AM
Event ID:      602
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxxxxxxxxxxxxxxxxxx
Description:
Error generating report job with the task name ''.
Context:
- Exception encountered = System error.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SRMREPORTS" />
    <EventID Qualifiers="0">602</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-06-24T16:11:03.000000000Z" />
    <EventRecordID>1277</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxxxxx</Computer>
    <Security />
</System>
<EventData>
    <Data>Error generating report job with the task name ''.
Context:
- Exception encountered = System error.
</Data>
</EventData>
</Event>
When I click on schedule a new report task, I get an error "Class not registered".
nada

Hi,
When we schedule a new job, we add a scheduled task to the c:\windows\tasks folder.
The scheduled task will contain the following command line
"c:\WINDOWS\system32\storrept.exe reports generate /scheduled /Task:"FSRM_Report_Task{GUID.......}"
There is also a folder on the system drive
C:\StorageReports\Scheduled
We Also store information in the system volume information folder in the following files:
c:\system Volume Information\SRM\Settings\ReportSettings.xml (we use .old and .alt extentions}
c:\system Volume Information\SRM\reports\reportX.xml (where X = an incrementing number set, in writing to these files, we also use .old and .alt extentions}
When experiencing issues relating to scheduled report jobs, you will want to examine these files and check for NTFS permissions issues on these locations also.
Make sure you check the volume that you will be running the report on.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
Scott

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

File server resource manager. Block file types based on size

I have a site where our users appear to be saving some pretty huge TV quality video files (usually .MOV, and usually over 900MB in size) to our file storage server. The
concern I have is that such large files are going to fill up our server we will run out of space .
I don't want to blanket block smaller (less than 30MB) .MOV video files from being saved
to the drive, so would like to know if there's any feature in the File server resource manager that can block file type based on size.
If it's not possible, then could someone please suggest this as a future feature of FSRM as I'm sure there are plenty of companies out there who face the same problem as me.
thanks,
Mike Geileskey
Infrastructure manager, PIAS UK Limited

Hi,
We could not block file types based on size by using FSRM. As a workaround you could use disk quotas on NTFS Volumes which are tracked on a per-user.
To apply disk quotas to existing volume users, add new quota entries in the Quota Entries window. Please understand that it will take you some time to add all users into the list.
It will allow administrators to control the amount of data that each user can store on an NTFS file system volume.
For more detailed information about disk quotas on NTFS Volumes, you could refer to the article below:
File Systems
http://technet.microsoft.com/en-us/library/cc938945.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to use quota on a desktop folder for all users with File Server Resource Manager.

Hi there,
I'd like to know if there is a posibility to use variables in the path with File Server Resource Manager if you want to set the quota.
The path I'd like to use is d:\home\%username%\desktop.
Like to hear from you all if there is a solution or workaround for this one :)
Thanks for your time.
Ben.
Ben van der Meer

That's a question about Automator, so I'd pop that one here
http://discussions.apple.com/forum.jspa?forumID=1339
Regards
TD

XCode server bot is not sending email - how to trouble shoot?

We have other bot's running on different servers and we get the email notifications as anyone would expect.
However, on this one MacMini xCode server we are not getting any email notifications. I've done some basic searches in the logs, but I really am stuck in just trying to figure out how to even trouble shoot it.
Suggestions?

Hi:
Below is the link to the manuals section for your server:
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?sp4ts.oid=1121516

How to Expire Large Files using File Server Resource Manager

Is there a way to expire Large Files over 2GB that have not been accessed in 2 years.
I see under the File expiration options that I can expire files that have not been Created, Modified, or Accessed for a certain amount of time.
Thanks,
Eddie

Hi Eddie,
FSRM can help report large files and also can help move old files to a folder, but I did not found a way to combine them in a single process.
Instead how about using Robocopy?
You can run robocopy /min:xxx /minlad:xxx <source> <target>.
/MIN:n :: MINimum file size - exclude files smaller than n bytes.
/MINLAD:n :: MINimum Last Access Date - exclude files used since n.
(If n < 1900 then n = n days, else n = YYYYMMDD date).
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Users quota- not sending email windows 2008 server r2

I have setup quotas in File Server Resources Manager, when I test sending emails, it works ok I get email from FSRM, but users doesn't get email when they reach quota even when they are on 100%. When I check Source Template Limit for each user I can
see that system sends email, but users not getting any email.
All users have email set in User Properties in AD.
What can be wrong?
I never left an open problem....I search, dig and ask, until it's solved....

Hi,
What external mail server do you use? Please try to create a receive connector with basic authentication only & anonymous permission on the mail server.
For more detailed information, you could refer to the links below
SMTP authentication and FSRM
http://social.technet.microsoft.com/Forums/windowsserver/en-us/b1c40455-a337-422b-bedd-597beae13969/smtp-authentication-and-fsrm
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Sharepoint Server 2013 not sending Email notification

I have a Sharepoint 2013 farm that is not sending any kind of email notifications. I also have a Sharepoint 2010 farm whit the same Outgoing Email settings and it is sending emails notifications normaly.
The SMTP service (the role) is in the same member servers of the 2013 farm, so it is reachable. The timer service is running well in both member servers of the 2013 farm. We don't have an On-premise Exchange enviroment because we use Office 365 (I cannot
set the sharepoint servers as allowed to relay in Exchange). The 2010 farm and the 2013 farm have the same Outgoing Email settings, I don´t know why the 2013 does not send emails. It is driving me crazy!.
How can I solve this?
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

What about Relay and Authentication?
Trevor Seward, MCC
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Look.
I think this is the correct configuration because it sends emails normaly with SharePoint 2010.
If I configure my own email account in Outbound Security, Sharepoint 2013 sends emails but just when I login to Sharepoint, if other users login it doesn't send emails.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Have a new iPad with ios6. Will not send emails. Addresses are valid but get notice each time that recipient was rejected by the server. No help on web site, and Apple's only manual is for previous os version. We miss Steve Jobs.

Have a new IPad with IOS6. Will not send emails. Addresses are valid but get notice each time that "recipient was rejected by the server." Apple has apparently neglected to put out a manual with IOS6 and the previous manual has no indication of what to do. Really miss Steve Jobs.

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

TS3899 My iPhone will not send emails message keeps coming up your pop3 server is not responding

My iPhone is not sending emails pop3 not responding message keeps coming up what should settings be

You need to check with the email account provider for the email account to determine what the settings should be.

Ipad not sending email, forced to reboot for changes to apply

Hi all
I was asked to look at a friends two week old iPad today.
It was set up for them last week.
Initially the person setting it up tried to add a Gmail account but found that it would receive but not send emails (using the native email app).
They then decided to open an outlook.com account and use that instead of the gmail account.
This worked fine for two days but then error messages saying that the mail could not be sent started to pop up. It struck me that the speed with which the error message appeared after clicking send suggested that this was an iOS issue rather than the server rejecting anything.
I tried to check the imap/smtp settings in the "control panel" but they were not available (read:visible) so I deleted the account and entered the settings manually.
It still wouldn't send emails but this time it didn't throw up any error messages, instead it decided to just dump them in the outbox without notifying me that there was an issue.
Suspecting that the issue was with the ipad rather than the outlook servers, I decided to use my own smtp server details. Initially I tried using SSL but when this too failed I switched to the unsecure version on port 25.
It still wouldn't send anything so I eventually rebooted by holding down the power button until the power off slider appeared. On rebooting I discovered that I could now send emails.
TBH I have no idea if using the different SMTP server will be an issue if they ever want to check their outlook.com "sent mail" on line or not but i do have some questions
1. Why was the reboot necessary? I had closed all open, unnecessary apps by double tapping the home button Might it have been the case that manually entering the outlook.com settings would have worked (given that the ideal set up would be to use the SSL outlook servers).
2. Is this an unresolved iOS7 problem. Google searches resulted in many owners complaining that the iOS7 upgrade had rendered their email accounts incapable of sending emails. TBH the advice given ranged from perhaps sensible to plain daft.
3. can anyone using outlook.com as their email provider on iOS7 confirm which smtp server, port, etc they use?
4. Are there better email apps that actually give you detailed feedback?
i don't know when I will next get the chance to get my hands on their ipad again but I would rather that they were using the correct outgoing servers with encryption (rather than my unencrypted smtp server).
Thanks in advance

neilyoung1 wrote:
For the past few days I am now having trouble sending my client emails. I get them bounced back with a permanent error of retry time exceeded.
This is getting fustrating now as my client is needing answers that I cant give. She is unable to email her colleague in the USA, and I am now unable to email her on a btinternet.com address.
Do BT engineers monitor these forums?
-Neil
Hi again Neil.
Your extra info now to me means that it appears to be problem at the client end!
I hope you don't mind me asking a few questions ....
Is she a regular BT Broadband user with a normal BTinternet email address ? Does she use secondary email addresses ?
Do you know if she can happily email other people ? If not - it could be an account problem which may last a few days ....
If you don't wish to provide the complete bounce message you received, could you perhaps email me the detail (emailing me using my shortcuts). Also pehaps you could ask your client to email me via my shortcuts, and see what happens and I'll take a look at replying to see what happens.
The user on shentel.net domain she's been trying to email, did she ever manage to send any emails initially ? It could be the destination user having a problem.
The mods do monitor these forums, but there are a lot of posts to go through of course ......
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Mail does not send email

My problem is simply that Mail does not send email.
I have just migrated from iMac G5 to iMac Intel by using Migration Assistant. Everything else works just fine and I can receive email. However, if I try to reply, forward or send a new email message, Mail just does not do anything - no error message, nothing.
The fixes I have tried so far are removing the Mail plist file, repairing disk permissions and mailboxes. Of course, I have checked the account settings, especially outgoing server settings. I also reinstalled Mail application with Pacifist. None of this has solved the problem. I have tried sending email with Thunderbird and it works with no problems.
Does anybody have any suggestions how to fix this issue?
The OS is 10.4.8, Mail Version 2.0.6 (749.2/752.3), all the suggested software updates done.
iMac Core Duo 20" 2GHz Mac OS X (10.4.8)

Reinstalling Mail is rarely necessary or appropriate to solve a problem. It certainly cannot fix anything that could be wrong within your home folder or at the server or with the network, and may even introduce new issues if not done properly. Moreover, in Mac OS X 10.4 you don’t need Pacifist to reinstall Mail, you could also do it as described in the following article:
Custom installs in Mac OS X 10.4
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, if the version of the system software on your install disks is earlier than what you’re using now (and only in that case), then you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, to bring Mail back in sync with the rest of the system:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
The above won’t solve the problem. It’s just to ensure that you’ve properly reinstalled Mail, which you shouldn’t have done, and which apparently you didn’t do properly -- the version of Mail on your system should be 2.1.1, not 2.0.6.
The original problem could be caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer.

HT1430 Hello, email settings correct, can not send emails from the ipad,

****, I HAVE ENTERED ALL MY EMAIL SETTINGS CORECTLY INTO MY IPAD FROM MY EMAIL ACCOUNT ON MY PC AND I CANNOT SEND EMAILS FROM IPAD , WHAT AM I DOING WRONG CAN YOU HELP PLEASE

it could be one of many reasons, is it giving you a reason why it is not sending emails?
I know you said everything is the same as your PC email settings, but I would double check, also the iPad will tend to default to IMAP, so if you are using POP3 for your email, you may need to change the settings on the mail server. For example Gmail default to POP3 and needs IMAP turning on.
What email account are you using? Who is it with?

File Server Resources Manager not sending emails

Similar Messages

Maybe you are looking for