File shares in EMC Isilon NAS not being accessible .........in windows file server

Hi
We have an odd issue in windows 2003 server where the users are not being able to access the shares in EMC Isilon NAS drives.
Found that the KB 3002567 installed on last Tuesday March 10 2015, caused the issue and related to Data that resides on EMC Isilon clusters is unavailable to SMB/SMB2/SMB3 clients.
Finally resorted to uninstall the particular patch from the Domain controllers of 2003 & 2008 and the shares are being accessible.
Is there any alternative to this process of uninstallation of the patch KB 3002567 ......since this patch has to be uninstalled in pending DC's?
Any help is greatly appreciated
Thanks & Regards S.Swaminathan Live & let others live!!!

In my own environment, I found the following registry value to be helpful:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters:RequireSecureNegotiate=2
(DWORD)
http://blogs.msdn.com/b/openspecification/archive/2012/06/28/smb3-secure-dialect-negotiation.aspx
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Similar Messages

Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face.

Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face. This is an Ipad not an Ipad2...I can't get this thing recognized by either my desktop or laptop. It used to work...not now.
Any ideas?

Did you already have a look at this article?
iOS: Device recognized in iTunes for Mac OS X

Hp laserjet p1006 is not being installed on window server2008 64 bit

hp laserjet p1006 is not being installed on window server2008 64 bit

Hi,
The printer is not supported on Windows Server 2008, only the operating systems listed below are compatible:
http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435682/model/3435683/drivers
The latest supported server OS is Windows 2003. any newer Server OS is incompatible with the printer.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When I open a file in Photoshop CS4, how can I resize My Open Window File?it is stuck on full screen

When I Open a File in Photoshop CS4, How can I Resize My Open Window File? It is stuck on Full Screen?

Which operating system are you using?
On a windows os, usually one can just double click on the title bar in the open dialog.

Finder data not being written to .DS_Store file

The symptom of the problem I am experiencing is that the position of icons on my desktop (as well as icons in other folders in my home directory, as well as Finder window settings for folder in my home directory) are lost every time I log out. On a subsequent login, all of the icons "reflow" starting from the top right corner of the screen, just below the boot volume icon. I have been able to determine that this has to do with the .DS_Store file(s) in the Desktop folder and other folders of my home directory. If a .DS_Store file exists, the timestamp does not change when I change the icon layout and logout. If I delete the .DS_Store file, it is not re-created.
In my case, my home directory (and the child Desktop folder) is being mounted off an SMB share on a Windows 2003 server. My Mac is using AD authentication to the same Windows 2003 server, which is the domain controller. I'm logging in with my AD credentials, and my home directory mapping is picked up from the home directory field in AD.
Now, Googling this problem, I found a lot of people complaining about wanting to suppress the use/creation of the .DS_Store files on Windows network volumes. This led to an Apple KB article (http://support.apple.com/kb/HT1629) on how to modify a default to prevent the creation of .DS_Store files on network volumes--essentially the very behavior I am experiencing. The upshot of the KB article is to us the following command in terminal:
*defaults write com.apple.desktopservices DSDontWriteNetworkStores true*
I did a 'defaults read' to confirm this default isn't set on my install of Mac OS X 10.5.6--and it isn't. I then tried using the following variation in the hope I could force the behavior I wanted:
*defaults write com.apple.desktopservices DSDontWriteNetworkStores false*
Predictably, this had to effect.
The upshot is, NONE of the Finder data for files and folders in my home directory (icon positions, Finder view window defaults, etc.) is preserved between logons. And this is driving me nuts! I've spent several hours over the past two evening trying to troubleshoot this, and I've had no luck.
As a footnote, I'll mention that if I drag a folder from my home directory onto the local hard disk, the .DS_Store file is created/updated and things behave as expected (icon position and Finder window defaults are preserved). But, if I then drag the folder back over to my home directory, the values in the .DS_Store file become "frozen" and don't change.

Hey, try this:
1.
Put a file in a folder on your Desktop.
Edit: not your Desktop, but rather a typical local home on an HFS+ volume ~/Desktop
2.
Use "Get Info" to add a "Comment".
The comment can be up to somewhere between 700 and 800 characters.
3.
Copy the folder to a FAT formatted flash drive, SMB share, etc.
4.
Create a new folder on the flash drive.
5.
Move the file from the first folder to the second folder.
Confirm that the "Finder" shows the comment to be there.
6.
Quit the "Finder" - in 10.4 and earlier, this action would ensure that all .DS_Store files get updated, including transfer of comments. I.e. don't "relaunch" or "kill", etc. Enable and user the "Quit" menu, or use:<pre>
osascript -e 'tell application "Finder" to quit</pre>
7.
Now where's the comment?
In step 2, you could also have just created a file on the non-HFS volume and wasted your time typing in a 700 character comment.
In step 6, a more real-world scenario is ejecting the drive or logging out, but deliberately quitting the "Finder" is the most conservative way to ensure that changes get written to .DS_Store files and comments survive. In 10.5.6, even under these conditions, comments are lost.
Icon positions and view preferences are one thing, but with comments - that's real user-inputted data that Apple is playing fast and loose with. And if they no longer support comments on non-HFS volumes, the "Finder" shouldn't be showing you the comments when you double-check them in step 5, or allow them to be added in the alternate version of step 2.
..."C'mon Apple... what gives here?"...
Unfortunately, this "Discussions" site is not frequented by Apple devs. Have you considered filing a bug report? I wonder what they would tell you, eg. if the treatment of .DS_Store files actually does turn out to be a bug or is intentional as it suspiciously seems...
http://developer.apple.com/bugreporter/index.html

Inbox folders not being created from msf files

Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
Inspecting my IMAP directory, I see the following structure:
~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
-rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
-rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
-rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
-rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
-rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
-rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
-rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
Removing .msf files and restarting Thunderbird has no affect.
When I launch, the errors console reports the following three errors:
"Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
-- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
"While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
[JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
I'm not sure what that means.
I am using Thunderbird 24.5.0 on Ubuntu 13.10

Is your question about files not being created, or because you cannot send and receive mail, or both?

Problem with file share from iTunes to iPad - not enough memory

Hi
I've got iTunes (10.7.0.21) installed - latest version.
On my iPad I have an app - OpenSong. I need to transfer a number of files to this app throug Application - File share (don't know if this is the correct description, I use a Danish version).
I want to add around 750 small files (1-3 kb) to the iPad. The problem is that it only will copy around 30-60 files at a time before iTunes comes with a box indication that the program encountered a problem and cannot copy the file xxxxx. "Not enough availabel memory".
I then have to close iTunes and continue from where I came to. If i don't, that is I try to copy again, iTunes frequently crashes.
iPad 3, 64 GB - plenty of free memory
Win 7, 4 GB RAM, plenty of free disc space. Windows and iTunes fully updated.
Anyone got an idea? Or how do I report this to Apple?

Hi Damse,
I have the same problem. I also have about the same number of small files to transfer to the iPad. The point at which the transfer through iTunes to the iPad varies within the range you describe. I also have taken to loading in as many files as I can, integrating them into the applicatiom, ejecting the iPad, and stopping and starting iTunes again and repeating the process.
Best regards,
Bob Charest

Files shares randomly display "Location is not available"

Hi all,
I recently set up a windows 2012 file share server for departments and user folders. I've pushed the drive mappings out via group policy and on my laptop they work flawlessly. On everyone else's computers, they're hit or miss. Group Policy is currently mapping
the drives based on IP address (i.e. \\172.31.255.250\shares\departments). As an example, this share will map to a user's device and it will be accessible. Periodically, they will no longer be able to access it and receive a "Location is not available"
message. However, if I navigate to the DNS name (i.e. \\servername\shares\departments) it will work. If that location becomes unavailable later on, I can still access it via FQDN (i.e. \\servermame.domain.com\shares\departments).
More information:
- Using my account on my laptop, I never have an issue with my network drives.
- Signing in to another laptop with my account, I experience the same issues as the other users.
- All of our computers are running windows 8.1 pro and are currently up to date.
GPO configuration:
Action - Update
Location - \\172.31.255.250\shares\departments
Reconnect - True
Drive Letter - Use S:
Hide/Show this drive - Show this drive
Hide/Show all drives - No change
Edit:
I'm seeing this in the logs and don't know why it would be happening:
The user 'S:' preference item in the 'Map department folders {3B0FD149-D2DD-440B-A68D-8A137558F393}' Group Policy Object did not apply because it failed with error code '0x800708ca This network connection does not exist.' This error was suppressed.

Hi Nathan,
When the issue occurs, can you connect it manually with \\172.31.255.250? Also please test to ping that IP address to see the result - Whether the IP is actually changed?
Also it could still be a temporarily network issue if it failed for a while and back to work with one of the 3 kind of connection (IP, NetBIOS and FQDN).
In order to find out the root cause you may need to capture a network connection trace with Network Monitor.
You can compare the 2 packages when using NetBIOS and FQDN (when one of it cannot connect) and find out the difference.
For how to use Netmon please refer to:
http://support.microsoft.com/kb/148942
Also you can upload some packages so we can help analysis - Please noticed that uploaded data to a cloud based app will share it with public so it is OK if you do not willing to share information with everyone.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Hi Shaon,
I can capture network connection traces later, but when the issue occurs, I CAN still ping the server and can even navigate to "\\172.31.255.250\shares" however the sub folders do not show up anymore.

Jvmargs not being placed in jnlp file by ant deploy task

Hi
I have an ant deploy task as given below. I run ant to produce the jnlp file. Everything works ok, EXCEPT the jvmargs, and the enclosing platform element, are not copied into the jnlp file.
Is this the intended behaviour?
thanks
graham
-- ant task ---
<project name="BuildInfoView" xmlns:fx="javafx:com.sun.javafx.tools.ant">
<taskdef
     resource="com/sun/javafx/tools/ant/antlib.xml"
     uri="javafx:com.sun.javafx.tools.ant"
     classpath="/Library/Java/JavaVirtualMachines/jdk1.7.0_17.jdk/Contents/Home/lib/ant-javafx.jar"/>
<fx:deploy
outdir="../installation/bin"
     outfile="infoview"
width="800"
     height="500"
     embeddedWidth="100%"
     embeddedHeight="100%">
     <fx:application
          name="Infoview"
          mainClass="com.ods.infoview.Main">
     </fx:application>
     <fx:info
          title="InfoView"
          description="InfoView"
          vendor="OrangeDog">
     </fx:info>
     <fx:permissions elevated="true"/>
     <fx:platform javafx="2.2+">
     <fx:jvmarg value="-Xmx400"/>
     </fx:platform>

     <fx:resources>
          <fx:fileset dir="../gradle/output/"/>
     </fx:resources>
</fx:deploy>
</project>

There is a FAQ note about this
http://java.sun.com/products/javawebstart/faq.html#72
Bill

New Zen Touch not being detected by Windows

I just bought a 20 gig Zen Touch off ebay, and tried to get it to run.
The firmware on the Zen tells me it's version 2..0, which is the PlaysForSure version. So, I downloaded the driver specific to PlaysForSure, and tried to run it. It looked like it installed just fine, but when I plug in the player, it just recognizes it (at the start) as Creative Zen Touch, and opens up the Found New Hardware wizard. So, I don't think it recognizes my Zen.
This, of course, leads to all the programs not being able to recognize my Zen, either, and to me not being able to reload the firmware (just in case), or anything of the sort. Not really sure how to proceed, and I've been scanning the help files, which have been no help. The knowledge database seems to suggest that Windows XP will just load the proper drivers, which, of course, it doesn't.
How do I proceed? I thought this would be the answer, but it presumes that Windows will detect the device as an MTP, and somehow just find the right driver, which it doesn't.
I'm at a bit of a loss as to where I go from here. The drivers aren't installing, and the closest I can get is my Device Manager showing the Creative Zen with a big yellow question mark next to it, because the drivers aren't installed properly.
Help?

Try downloading and installing the latest drivers, Creative Zen and Jukebox Driver Upgrade version .30.03.
Also try running a disk cleanup from rescue mode.

IPod not being recognised by Windows..cant change the hardis

All,
Pls help a iPod freak out. I recently recieved a new ipod via Apples Warrenty conditions sound good right... Wrong!
My new ipod is not being recognised on my pc.
I have:
Reintstalled the latest Ipod Sw 2005-26-6 (and the original version 2004 8-6)when the latest load didnt work. reinstalled iTunes and tried to restore my ipod.. when i do, i have a pop up that says that the ipod is locked!!. I have gone on the aple support website and it tells me to format my ipod for windows i need "iPod for Windows Software 1.0" but it states that this is not found on the Apple website! My original pacjkaging only had the one disc with itunes and ipd sw (no specfic Windows sw)... And even if this sw is on the disc.. it wont connect to my laptop as its formatted for a mac!! Im going on holiday in two days.... PLS HELP ME.

I have the same problem! My iPod worked for about 2 hours and then, it froze and turned off and now all I get is a sad iPod icon. I have done everything and it will not reset/restor/go into disk mode or anything. I have downloaded all new software and my PC won't recognize anything.

TS1567 iPhone not being recognized by Windows 8 or iTunes

My iPhone is not being recognized by my Windows 8 laptop, or itunes. I have used the original cable and a new one. Both cause the computer to ding when the phone connects, but i cant find the phone ANYWHERE. I have stopped and restarted the Apple Mobile Support Service. And restarted my laptop.

All needed drivers are installed when you install iTunes and QuickTime. Try to reinstall the Apple software again, as explained in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista,Windows 7 or Windows 8

IPod not being "recognized" by Windows XP

So I just got my 30GB iPod Video and I installed all the software and stuff. I hooked the USB cable up, but each time windows says "USB Device not Recognized". I looked at the message and it says something about a driver not being installed for the device. If anyone could help me I would love it!!! I've done EVERYTHING!!!

I hope this will help. I had installed my 5th Gen. 30 Gig iPod on my computer which originally only had 1.1 USB ports on it at that time, and it did sync and work, but I wanted to be able to sync faster. So, I had a 2.0 USB card installed. This card would not recognize my iPod at all. I reinstalled iTunes and iPod software thinking that would help, but nothing helped the 2.0 card simply would not work with the iPod.
So, I went to the iPod search site and did a search to find approved 2.0 usb cards. That yeilded several pages of approved USB cards. I took this list to my computer guru, they ordered me one of the approved cards, took out the first "generic usb 2.0" card they had installed and put in the new on. Guess what, it immediately worked when I plugged in my iPod!!! It copied 59.2 minutes worth of music to the iPod in less than 10 seconds! I am amazed how much faster it is.
I say all of this to say that your computer's USB card may not be compatible with your iPod. If not, change out the card with one that is. I hope you will have the same success I had. What a difference it makes! Good luck.
Dell Dimension 4300 Windows XP 5th Generation 30gig iPod

OS 10.6.5 Mac; File Firefox 3.6.13.dmg not identified; Won't download file

Tried to download FF 3.6.13. File seemed to down load but when trying to open the file error message stated: File not recognized. Macintosh OS 10.6.5. When I when I tried to download the file again, the download ran for about a minute or so and then said unable to download.

I have the same problem, and I have checked that I definitely installed the correct version for my mac...

Ipod not being detected by Windows

Hey! I've asked this question before, but no one has given me anything yet. Not being selfish or anything. But when I put in my ipod my computer tells me:
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
For that, Itunes doesn't detect it either. Can't put songs on when that happens and it leads to an very distressed kid. Can someone help me and others who have this problem?

but then I'll have to get all the song from CD's again.
If they are all in your iTunes library and you sync your iPod, when you get a new iPod, you just need to sync it to the library. If you've been manually managing your iPod's content, and the songs are not stored on your computer, well, you were taking a chance that the iPod would break or get lost.

File shares in EMC Isilon NAS not being accessible .........in windows file server

Similar Messages

Maybe you are looking for