File Shares Not appearing

Good Afternoon,
  I have installed/uninstalled arch about ten times in hopes of learning it and have learned quite a lot. And have tried over these past few weeks to avoid the forums as I enjoy the self-satisfaction of that golden google found solution. However, to be to the point, whenever I go to my network places under root or regular user, I cannot see my shared folders or shared printers.
INFO:
My computer: Running Arch Linux and Windows XP connected wirelessly to my router
The Server: Running Windows Server 2003.
I can see the folders, use them perfectly while booted into WinXP but not Arch
Other computers can use files fine.
Server is hardwired to router.
Pictures.
Thank You, Dan.

Now I'm not completely sure if this could be the problem, becuase I don't think you would see the windows network at all if it was, but do you have a samba client installed?
It seems though that smbclient should come in as a second tier dependancy for nautilus.  (nautilus depends gvfs which depends on smbclient)
I guess you could also try and access your share w/ smbclient directly, though that might take some man page reading to figure out.

Similar Messages

  • This file does not appear to be a photoshop file error.

    Hello,
    I know this has been covered a few times already, but none of the previous threads about it were able to help my situation.
    Ok so here is what i did:
    Exported a JPEG from a timeline in FCP. Brought that JPEG into PS (i am using CS3), and changed the image size from 1920x1080 to 720x480. Then saved as a JPEG, didn't tick any boxes, just used default save as settings.
    I then brought those images into my Encore DVD Project, added them to the library, then placed one into a already made menu, and "sent to back".. so it became the new background. I did this with two menu's today. Note i have actually done this same exact process many times without problem. I then tried to build a dvd image of the project, and i got the "this file does not appear to be a photoshop file". Now it won't even let me open those menu's (plus another one, which i made a long time ago, and have even successfully built DVD's with), to edit them. I tried removing all the new JPEGS i added today, from the library, but still i get the same message.
    The menu's that i now can't open, took a very long time to make, and i need to have this DVD completed ASAP.. as it is being released world wide in a couple of weeks and i need to get it replicated. So i don't actually have time to remake these menu's. So if anyone can help me, that would be much appreciated, as i have studio exec's cracking down on me.
    Thanks in advance :-)

    Now, if one Imports the JPEG with its extension changed to PSD as a Menu, then the Menu is created, including the necessary Layers. The Menu is NOW a PSD, and when Opened in PS will reflect the Layer structure (try this at home). If one had constructed Buttons in the JPEG, they would now only be graphics on that one single Background Layer in the JPEG. They would not function as Buttons, but could be useful graphics for other things. One would then need to add real Button Layer Sets to the PSD to be able to add any navigation.
    Back in the post above, I suggested doing the Save_As to JPEG to see how things get changed. Use that in another test - Import that JPEG as a Menu. In Encore, try to Link to what had originally been Buttons in that Imported JPEG. What happens? Can you Link to them, even though you are now working with the created PSD?
    Now, add a Button, or two, from the Library. Choose Edit in Photoshop, and look at the Layer and Layer Set structure. Things have changed from the original JPEG, with only the Background Layer. You now have that Library Button's Layer Set structure.
    Good luck, and hope that this helps,
    Hunt
    Here are looks at the structure, using the Library Menu Business>Clock:
    The Menu in PSD with the Layers Palette Open
    Same Image With Layers Flattened to Save As a JPEG
    What the JPEG Looks Like As a Flattened JPEG
    The only way to Import that JPEG into Encore as a Menu would be to change the file extension to PSD, but what appear to be Buttons would NOT be Buttons, but just static pixels in the Background.
    Message was edited by: Bill Hunt - Added graphics

  • Error Message** This file does not appear to be a photshop file

    Okay.. so I have been researching forums and have seen this message throughout, my issue seems to be slightly different. When I am in Encore CS3 and trying to create a menu, I import my background designed in photoshop, have the buttons set up correctly, test it in the preview screen and everything works correctly, the file is recognized as a psd file, and even saves as a project in encore. When I go to build my DVD I get an error saying "This file does not appear to be a photoshop file, although when I check the properties it recognizes it as a psd.. any suggestions?

    Adam,
    Not sure that I understand this message:
    And Actually yes I do have a circle in my button to play now.
    Can you enlighten me a bit. Does this mean that En has accepted the PSD, or something else.
    If something else, I would also look closely at the Layers in the PSD. While I do not recall very small Layers creating an issue in En, they have been known to do so in PrPro. This is often something like a very small logo, on a Layer by itself, with nothing but transparency around it. In PrPro, a message, similar to yours is offered up, but that is in Import, and you got it only with the Build.
    Too bad that the Check Project function is not a full pre-flight test of all Assets, like in InDesign, but it falls short, as it only checks for DVD-compliance in the navigation. I've filed Feature Request for more, but since En is built on the Sonic AuthorCore modules, I suppose that it's not as easy, as I would have hoped for.
    Good luck, and help me understand the above,
    Hunt

  • "This file does not appear to be a Photoshop file"

    Ok, I used the first edition of Encore in the past, but I just installed the version that came with Premiere CS3. I used Photoshop 6.0 to do my menus in the past, but just installed the trial of Photoshop CS3.
    Two things:
    My old menus I created in Photoshop 6.0 won't import into the new Encore.
    The new menus (I opened my old menus with CS3 and saved them out.) won't import into Encore either. In both cases, Encore says:
    "This file does not appear to be a photoshop file."
    The files are indeed all photoshop .PSD files and the Photoshop 6.0 files are actually menu files that were in the same .ncor project I used on the old Encore and opened on the new one.
    Why won't Encore read these?
    Thanks!

    Bummer,
    I hoped that I had helped.
    Let's play 20 Questions:
    The PSD files were originally created in PS 6, and you have Opened them in PS-CS3, from which they were Saved. Correct?
    Did CS3 throw any error messages?
    You state that they were Menus in Encore. Which version, and did they function perfectly there?
    I assume that when used in a previous ver. of Encore, they did function, but now you have Opened, worked on and Saved from PS-CS3. What changes were made?
    Was the Color Mode, or Bit-Depth changed, or were Alpha Channels introduced?
    Has your OS been changed?
    Will these files still Open fine in PS-CS3?
    I'm trying to find the point that they ceased to Import, as they should and find out what might have changed with them. You might want to do a bit of a timeline on the life of these files, i.e. 1.) created in PS6. 2.) used as Menus in Encore2. 3.) Opened and changed in PS-CS3 by doing X. 4.) Saved out as PSDs and attempted to Import into Encore CS3 with above error message...
    Something has to have changed, and the task is to find out what that is/was.
    Hunt

  • This XML file does not appear to have any style information associated with

    Hi All,
    I have IDOC to XML file scenario.
    In SXMB_MONI, it showed the message processed successfully (checkered flag).
    I open the payload in the target, I'm able to see the XML format without error.
    then I checked in RWB the overall status is successful.
    But when I checked the detail (message content) I got the following message:
    "This XML file does not appear to have any style information associated with it".
    So physical file created is like corrupted.
    If using XML marker to open the file it show warning "Invalid Unicode Sequence".
    The thing is when rerun the whole interface again, which is mean the same idoc send from the source, the file created successfully. Sometimes need to rerun twice or more than that to get the file.
    Anyone has idea on what is wrong here?
    Thanks,
    Victor.

    Hi Baskar,
    Thanks for your reply.
    It's PI 7.0.
    Overall status is successful but when I go to RWB to check the message content i got the error message above.
    Target system is only normal FTPS server.
    XML file is created as well but it's showing error when we open it.
    The weird thing is without fixing anything if we rerun the same interface with same set of data sometimes the error is gone by itself.
    Thanks,
    Victor.

  • This XML file does not appear to have any style information...

    hello,
    i am a new oracle spatial developer and also i am new in XML. i want to see the demos in oracle 10g enterprise edition. i imported the necessary dump files and i created the necessary user defined as mvdemo/mvdemo. when i want to see the demos in mapviewer, i come accross this error:
    This XML file does not appear to have any style information associated with it. The document tree is shown below.
         <oms_error>
    Message:[XMLHelper] xml eşleme isteği incelenirken hata.
    Fri Feb 25 01:37:39 EET 2005
    Severity: 0
    Description:
    Message:[XMLHelper] xml eşleme isteğinde geçersiz geometri.
    Fri Feb 25 01:37:39 EET 2005
    Severity: 0
    Description:
    Message:GML Geometry type Point not suppoted.
    Description:
         at oracle.sdovis.JSDOGeometry.fromNodeToGeometry(JSDOGeometry.java:3185)
         at oracle.lbs.mapserver.core.XMLHelper4Mapper.parseGeoFeature(XMLHelper4Mapper.java:712)
         at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:223)
         at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:167)
         at oracle.lbs.mapserver.oms.getMapRequest(oms.java:678)
         at oracle.lbs.mapserver.oms.doPost(oms.java:314)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    </oms_error>
    for now, i dont know what to do.. if someone recommend any useful idea, i would be greatful.
    best regards..

    hello,
    thank you for your reply..
    i made some changes and i dont see the errors that i mentioned above any more. but still some problems..
    firstly, i decided to change the settings in the mapViewerConfig.xml file in order to add a new datasource. i copied it and that is the reason why you see the '!' in my explanation. the new situation in the mapViewerConfig.xml file like this:
    <map_data_source name="mvdemo"
    jdbc_host="c-0y5wp0jvd2bf8"
    jdbc_sid="orcl"
    jdbc_port="1521"
    jdbc_user="mvdemo"
    jdbc_password="nzKVD/KFZYkGc0uF7EL7/vPibuAPpQ9j"
    jdbc_mode="thin"
    number_of_mappers="3"
    />
    "c-0y5wp0jvd2bf8" is my computer name. jdbc password was encrypted when i started the mapviewer. this is the new screen of the mapviewer after starting:
    05/03/01 17:49:58 INFO [oracle.lbs.mapserver.oms] oms root path: C:\mapviewer10
    12_qs\mv1012qs\oc4j\j2ee\home\applications\mapviewer\web\
    05/03/01 17:49:58 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)
    initialized
    05/03/01 17:49:58 INFO [oracle.lbs.mapserver.core.MapperConfig] using default co
    nfig file: C:\mapviewer1012_qs\mv1012qs\oc4j\j2ee\home\applications\mapviewer\we
    b\WEB-INF\conf\mapViewerConfig.xml
    05/03/01 17:49:58 WARN [oracle.lbs.mapserver.core.MapperPool] destroying ALL map
    maker instances.
    05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] Spatial Data Cache opened. Regi
    on=SDOVIS_DATA.
    05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] max_cache_size=32 MB.
    05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] sub region sdovis_subreg_mvdemo
    _jdbc:oracle:thin:@c-0y5wp0jvd2bf8:1521:orcl created in cache.
    05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
    tance to the pool [data src=mvdemo]
    05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
    tance to the pool [data src=mvdemo]
    05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
    tance to the pool [data src=mvdemo]
    05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperConfig] Map Recycling th
    read started.
    05/03/01 17:50:17 INFO [oracle.lbs.mapserver.oms] *** Oracle MapViewer started.
    when i open the page ( http://localhost:8888/mapviewer/ ) and press the submit button of the "sample map request" section to see the result of the demo, i come accross this error:
    This XML file does not appear to have any style information associated with it. The document tree is shown below.
         <oms_error>
    Message:[XMLHelper] xml eşleme isteği incelenirken hata.
    Tue Mar 01 17:53:51 EET 2005
    Severity: 0
    Description:
    Message:[XMLHelper] xml eşleme isteğinde geçersiz geometri.
    Tue Mar 01 17:53:51 EET 2005
    Severity: 0
    Description:
    Message:GML Geometry type Point not suppoted.
    Description:
         at oracle.sdovis.JSDOGeometry.fromNodeToGeometry(JSDOGeometry.java:3185)
         at oracle.lbs.mapserver.core.XMLHelper4Mapper.parseGeoFeature(XMLHelper4Mapper.java:712)
         at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:223)
         at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:167)
         at oracle.lbs.mapserver.oms.getMapRequest(oms.java:678)
         at oracle.lbs.mapserver.oms.doPost(oms.java:314)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    </oms_error>
    in addition, i use firefox as my default browser. however, i tried it in the iexplorer also but gave the same error again.
    i look forward to taking a response. thank you very much for your care again.
    regards

  • I keep getting the message This XML file does not appear to have any style information axxociated with it. The document tree is shown below Is this a serious problem?

    My daughter and i use same computer she uses firefox and recently we have noticed on facebook apps we get the message This XML file does not appear to have any style information axxociated with it. The document tree is shown below

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I keep getting "This XML file does not appear to have any style information associated with it."

    I keep getting a message that reads "This XML file does not appear to have any style information associated with it. The document tree is shown below." when I try to view certain images with the document tree reading something like this:
    <Error>
    <Code>AccessDenied</Code>
    <Message>Access Denied</Message>
    <RequestId>BCC4C0545EAAB7AE</RequestId><HostId>3LxcI9VY5wksYdmblAgu2dYu9ZfkLVZJWYhDtoIdRIE4HyARxC+ogJXkApL6U+tT</HostId>
    </Error>
    I tried updating Firefox and that didn't work. All I could find was that it could be a proxy thing, but I'm set to "no proxy" in my network settings so I'm stumped.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Using live HTTP header get This XML file does not appear to have any style information associated with it. The document tree is shown below

    Im using ReloadEvery 3.6.3 & Live HTTP Headers 0.16 plugin's for playin mobsters on myspace. After capturing the the script, editing & placing in the address bar I recieve a message: Failed Security. This XML file does not appear to have any style information associated with it. The document tree is shown below. There was nothing on the Tree. I know the script was edited correct cause it works on the other PC's. Operating system is win7 & Firefox is current. Thx.
    == The first time

    yea I got the same error for playing files on filestube and its just not that, ever since 2 days ago when I updated firefox everything have just started to ..uck up all the time, high cpu memory load without any addons and it wont terminate for another 20secs after I close it... I think I'll just reinstall with an older version, everything worked just fine then

  • HT2486 The selected file does not appear to be a valid comma separated values (csv) file or a valid tab delimited file. Choose a different file.

    The selected file does not appear to be a valid comma separated values (csv) file or a valid tab delimited file. Choose a different file.

    I guess your question is, "what's wrong with the file?"
    You're going to have to figure that out yourself, as we cannot see the file.
    Importing into Address book requires either a tab-delimited or a comma-delimited file. You can export out of most spreadsheets into a csv file. However, you need to make sure you clean up the file first.  If you have a field that has commas in the field, they will create new fields at the comma. So, some lines will have more fields than the others, causing issues like the error you saw.

  • Files do not appear in Finder

    When I launch Finder, files do not appear in any folder except "All My Files." If I look in any other folder, such as my user folder, Documents, Downloads, Applications, etc., nothing appears. It is as if those folders are completely empty -- but they are not, because I can open files from "All My Files" and see that they are located in the various folders that appear to be empty in Finder.
    For example: when I open "Applications" from my Dock, I see all the application icons. If I open "Applications" in Finder, I see . . . nothing at all.
    I have tried searching for answers in the forums and see nothing that helps. Thanks.
    Also, I can't even tell you what operating system I am using, because when I click on "About This Mac" it does nothing. I know it is a relatively recent application, since I purchased this MacBook Pro within the last 6 months.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Family share not appearing on 2 gen apple tv

    my sister has a 2 gen apple tv and the family share content does not appear. how do i fix that.

    TV rentals are only a recent addition, and your original appletv never had them.
    you have not lost anything, your appletv still does what it did when you bought it.
    if you want access to TV rentals then you need to buy a $99 second generation appletv.
    only you can decide if spending $99 is worth it to get "limited" TV show rentals.

  • This file does not appear to be a Photoshop file - Menu won't import

    I was searching on the forums and found that some other people have had this problem, but I didn't see any solutions.
    When I try to build my DVD from Encore, I get this error "This fiel does not appear to be a Photoshop file.
    I created my menu in Photoshop CS4, imported it as a menu.  When I preview in Encore it works fine?
    The photoshop file is 8 bit color...should it be 16?  I tried that to, but it doesn't seem to change anything?
    Any help is greatly appreciated!!!

    The 2 bit image object that shows up to the right of the buttons on the highlighted state still was a little too crisp, but
    I'm going to try a little vertical blur like you said to see what happens.
    Well, the Vertical Blur will not work there. The Sub-picture Highlights cannot have any Styles, or Filters added to them. What I do to "simulate" a "glow" is to to create a second Sub-picture Highligh, in the next Layer down (in the same Button Layer Set)t, ever so slightly larger. I then set it's Transparency in Encore to be about 50%-30% of what the "original" Sub-picture Highlight's Transparency was. You can also assign another number from the Menu Color Set (this is done in PS), and then adjust that number's value in Encore to be a shade lighter of the original Sub-picture Highlight's. You will end up with maybe a 2 and a 3, and need to pick those colors from a Custom Color Set in Encore - cannot be done in PS, at least through CS3 and I do not believe in CS4 either. That might bear checking out, with someone like Jeff Bellune, or Jbowden. See this LINK for some tips, and this one for the full ARTICLE. The link to the version posted on Adobe has been lost, with the changeover in the forum. You can post and read at Muvipix.com, without a subscription, or even the free signup. Because of the wealth of Functional Content, stock music and Menus, etc., you might want to spend a bit of time poking around there.
    Though most of the article and discussion revolve around removing part of the Sub-picture Highlight, the final steps are for adding what appears to be a Blur. Remember, you only have ON, OFF, COLOR (limited to 4, including the background) and TRANSPARENCY, for each pixel in a Sub-picture Highlight. That's why you cannot have Styles, or similar. You have to create the illusion.
    Also, I created my lower third in Photoshop and saved out a .PNG file to import into Premiere.
    When I play the DVD, there seems to be some noise in the title.  Do you think that's because of how
    I saved the video out or because I used a .PNG?
    I do not know. I have never used the PNG format. Instead, I create all of my Titles (the ones that I do outside of Titler) in PS, often using AI for shapes, that will be Rasterized in the process. I do my Titles there, and then Save_As .PSD. If I wish to animate some of the Layers, I'll Import as a Sequence, if not, I Import as Footage. I always start from the image Preset to match my Project, so frame size and PAR are right to begin with. The only reason that I can think of for using PNG is the Transparency, but PSD offers that, and so much more.
    There is much that one can do with the animation of PSD Layers in PrPro. It's not as powerful, or as full-featured, as is AE, but many are surprised at how good it is.
    Best news is that you are almost there, and that things looked good on the DVD. If you have any trouble following the steps for the simulated Glow in the second Sub-picture Highlight, just let me know. It's been a whle, since I wrote that, and might need to re-visit it myself.
    Good luck,
    Hunt

  • File Icons Not Appearing in Finder

    Over the years I have archived projects on CDs and DVDs. I have always worked on Macs. No PC involvement. I have been doing this since 1987. Over the past couple weeks I have noticed that the icons of files (not folders) on my older disks are not appearing. I am using the latest Mac OS 10.8.3 on a MacBook Pro. However, on a friend's older Mac Pro tower (Intel), running an older OS (10.6.8), the file icons do appear. Also, it seems that all folder icons do appear on both systems. I have searched the Internet for an answer. I have a lot of old files that I currently cannot seem to access because of this issue. Can anyone shed any light on this? I think it may be an OS issue.

    Hi,
    I was under the impression that the Disk Level info was the bit that had the problem.
    I am not sure why I ended up with that thought as you clearly state it is contents type info such as tiffs and the like you cannot "see" for long.
    The Site did help with that.
    I dug out a old Mag CD with a game on in.
    I do not suffer losing sight of any of the files no matter which view I adopt.
    It lists the Mac OS Standard as the format and the Roman encoding your Video and pics show.
    (Strangely it says it was Modified  and the date is before the listed Modified dates of the files and folder it contains).
    I don't have any self created disks from that time to test.
    I am at a loss myself now.
    Sometimes, as in my Pic, the Applications that were written for OS 9 (Classic era) and earlier have the no entry sign over them.
    Other times the items will show a generic file icon as it has "lost" which app it belongs to.  (Which the PRAM reset deals with)
    Your files clearly show the icons of the apps that would normally open them.
    Files or folders that are normally hidden don't get counted in Quick Look or other forms of veiwing the contents, such as the lower bar in my pic.
    It would appear the OS is reading the Disk properly but  then deciding that it is not going to display all of it.
    I tried viewing the files on my drive if different views - iCon and Cover Flow for certain - but did not notice any difference in what was presented.
    If you have the Disk Open and in the Finder > View Menu > Show View Options and then choose Show Icon Preview do you get to see the tiff files at all ?
    I would also try the Size change in the Cover Flow view just to see if it is something about the icon data that is "missing" or being mis-read.
    I am clutching at straws at this point.
    9:58 PM      Monday; May 20, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Bounced files do NOT appear in finder immediately

    I'm posting this in the Logic forum, because I believe it is an issue only happening with Logic and the Finder in 10.5.4.
    When I bounce files from Logic7 or Logic8, and then switch to the "Bounces" folder in the finder window that I usually have open in the background, the file that I just bounced does not appear there. The only way to get it to appear is to manually browse to another folder and then back to the "Bounces" folder so that the finder refreshes that folder's contents.
    This was not a problem until I upgraded to 10.5.4 and Logic8. I was previously on 10.4.9 and Logic 7.2.
    Other apps seem to be able to save documents and files to a folder, and they immediately appear in the finder window. What gives? Anyone else noticing this behavior?
    This is giving me a headache and carpal tunnel pain. It's a 2 for 1 special!

    But I've seen it with FCP, Compressor, Snapz Pro video capture and other software as well, that I can't bring to mind at the moment.
    Ok - so if it's quite common, then indeed it could be a common implementation of file writing that's not quite working right (due to changes in the OS perhaps) or is particular system routines themselves that have this issue. Makes sense.
    What I am pretty sure about is that I've seen it more often with software that takes a while to stream its data to the file (which might imply that there is a bug in the file close routine or that the app still have the file handle open when it ought to close it) and that might imply it a problem in the Pro Apps support routines (if they handle streaming to files, which I doubt) or some aspect of file management which, guessing that these things are all done through OS file management objects, would imply incorrect use of the object or a bug in the object itself.
    Yes, agreed. A much more eloquently written version of my above paragraph
    I've certainly seen it elsewhere so it's wider than Logic.
    I'm not up on the OSX reporting things - are there OSX feedback places where you can report OS bugs? There's always the ADC bug tracker I guess...

Maybe you are looking for