FILE SHARING and PRINTER SHARING only... best, most secure way to set up?
I have a MacPro and a MacBook here on my home wifi (time capsule) network. The ONLY "sharing" I do is transferring files between the two computers, and using Printer Sharing so the MacBook can use the printer.
I don't want ANY other traffic, but it seems like w/ Snow Leopard the Firewall's either ON or OFF, and no in-between.
What's the best way to set this up?
Hmmm. I live in an apartment building w/ lots of wifi routers.
I have a password on my TimeCapsule, so that should be safe.
But I don't want my "shared" computers to show up as share-able on other people's computers.
Hmmm.
Similar Messages
-
Personal File Sharing and Printer Sharing difficulty
I hope someone can help me, this is really irritating.
I have an Intel iMac running OS X 10.4.11 and a motley band of other computers, Mac and Windows. For the past few months, I haven't been able to use Personal File Sharing or Printer Sharing to connect to the iMac. Some details:
1) Everything used to work about 6 months ago, but stopped... I don't know exactly when it stopped and I don't remember any installations/updates/etc that happened around that time.
2) I can't connect from a OS X 10.3 Powerbook to the iMac, but I can connect from the iMac to the Powerbook.
3) None of my Windows computers are able to do anything.
4. All of the computers have no trouble connecting to the Internet.
5. I don't know if this means anything, but the iMac beeps as soon as the desktop appears on startup and right before the desktop disappears on shutdown.
Does anyone have any ideas? Everything seems to be set up properly... the Sharing control panel shows that all Personal File Sharing, Windows Sharing, and Printer Sharing are all running.
Thanks,
JoeHi Joe, and a warm welcome to the discussions!
1. Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
2. Find the IP of the iMac in it's Network Pref Pane>TCP/IP tab. In finder, select Go menu>Connect to Servers..., then on the PB, type in afp://ip.of the iMac, like...
afp://10.0.1.5
afp://192.168.1.3
3. From Windows®, try...
smb://10.0.1.5
smb://192.168.1.3
5. Open Console as soon as it boots up, check for meaningful messages. -
I have 11 computers all pc's linked to an old windows server and all used primarily for microsoft office and printer sharing as well as for internet browsing. Can an apple joining the setup cause compatability issues?
HI,
grey-haired IT guy here, old enough to come from the counter culture. I ran (COO, including IT & compliance) a third billion dollar financial institution all on Macs 15 to 20 years ago. All the "experts" had a long list of reasons it would be impossible, and it drove the examiners nuts, but it's only gotten better.
So your benefits are going to be mostly in ease of administration after the learning curve, less aggravating glitches, better overall reliability, and arguably better security. And reductions in cost and improvement in time to implement changes.
In my current environment of mostly dozens of PCs, the moment I let the OS X Server be the domain master controller, the Windows network browser settled down and instantly showed network neighborhoods like it should have. (We may have some forgotten pre-NT machines plugged in somewhere -- this is NOT a financial institution).
Couple anecdotes might explain the feeling of coming in out of the cold: Putting a test copy of a web site from the cloud onto the Mac server, XAMPP or MAMP is pretty much already there. The site has a couple WordPress blogs, and they need .htaccess files, and Apache needs an option set to permit remapping URLs. After much searching far and wide to find why it didn't seem to be working, I found the checkbox right there on Apple's management screens. Much easier than editing .conf from command line. Linux web admins hate it.
Tale # 2: We aren't fully Windows domain controlled -- just using the old network browser. Need to upgrade that, and I Googled quite a while trying to understand what needed to be done to use Apple's Open Directory instead of setting up an Active Directory on Windows -- both SLDAP3. Turns out one reason I couldn't find much is there isn't much to say: it just works. Just join the domain from a Windows machine.
One more and I'll be quiet a bit. We use the Wiki collaboration which is nice enough as far as it goes (no spreadsheets, fatal flaw) and it occupies the server's native web site slot. So the test copy needed to be another site. Easy enough -- site setup is all GUI and works fine, but WordPress could not handle a multiuser blog coming to a non-standard port (other than 80) so I needed a second IP multihomed on the server. How do you do this? Go to Network in the System Prefs, click on the Ethernet interface and select "duplicate". Set your IP address. Done.
In summary a Mac OS X Server is a better server for a Windows shop than Windows Server 200x.
My bottom line for choosing Apple: lower blood pressure. I SHOULD be money. After all is said and done, it's about money. The incredibly more pleasant experience is a free benefit. You'll pay more for better hardware, but way less in time and trouble. And you won't be hounded on a daily basis to update the system. Not that Adobe or Firefox are any better about it on a Mac, but the Apple approach to updates stays in the background.
Think different. Simplify. Focus. Enjoy your work. -
LAN file and printer sharing lost
We're very happy we just installed wireless broadband in New Zealand - an Ericsson W35 Fixed Wireless Terminal connect us to the new Telecom 3G network most places we sail our yacht ADAGIO.
The W35 includes a wireless access point, so we enabled that (instead of our usual Internet Sharing on the Mac Pro that interfaces via ethernet to a wireless bridge -> external antenna, etc.) Great, now we have 3 computers all happily on the net.
We can ping <--> on every computer. BUT file sharing and printer sharing do not seem to work. The Mac Pro has both file and printer sharing enabled. The MacBook Pro e.g., has file sharing enabled
Besides successful pings both Mac Pro and MBP appear in their respective Sidebars under SHARED. But Go/Connect to Server doesn't succeed.
Any tips mucho appreciated!!Resolved.
-
Best Practises for File Sharing and Print Server on Windows Server 2012
Is it better to have File Sharing and Print Server installed on the same Windows 2012 Server ?
Or, they should be installed on 2 different Windows Servers ?
Hussien SheriefIt will work just fine to combine them.
But most people would recommend keeping functionality separate... if the budget allows. That whole "single point of failure" concept. If that server dies, you've lost both of those functions. -
E3000 file and printer sharing issues
Yes, there is at least one other thread on this but it looked a bit stale.
Last Friday I replaced my BEFSR41 router and WRT54G wireless access point (which had gone brick on me) with an E3000.The E3000 is configured as a DHCP server at 192.168.168.65 with a scope of 66-115. The only other non-default setting is that I opened up the custom port for my slingbox.
Prior to making the switch, I had several network shares on an XP desktop that I used frequently from my Vista laptop. Now, however, I can no longer even "see" any other computer from any of the computers on the network, much less access their shared folders. In other words, if I view the network from any of these machines, the only machine that shows up is the machine itself. Everything else (internet access, slingbox, a print server) is working just fine.
One of the suggestions in the other thread was to turn off Norton Internet Security, which is of course not a viable option. However I did check the settings, relaxed the network default to "Shared", and raised the XP desktop to "Full Trust". This had no effect.
I pinged the various computers, and was able to do so by their IP addresses, but not by their computer names (that worked with the old router). On a hunch, I tried creating a mapped drive, and that also worked when I used the IP address, but not when I used the computer name.
So - there's nothing wrong with the network configuration, or with how the shares are set up, and Norton isn't the problem. The only problem seems to be that names aren't being resolved, which could be affecting windows discovery, too. Did the BEFSR41 provide some local DNS functionality by default, and the E3000 doesn't? Is there an option I need to enable? If so, I can't find it. Perhaps I should explicitly add the E3000's internal IP address as a third nameserver??
A note on the "support" I tried to get before I turned to the forums: The "Chat agent" asked a bunch of questions, misunderstood my configuration and my problem, and once he finally did understand said "we don't support file and printer sharing". It took me several more questions to learn that he really meant that the Chat facility isn't the place for these questions - I had to call the 800 number. I did that, and after several minutes on hold, reached an agent. After going through everything again, and with the rep going on hold several times to "speak to his supervisor", he said it was "beyond his competence". I was eventually told I had to call another FEE-BASED service. I told him that was unacceptable.Ok, another update and possibly some clues.
I was curious why at one point, when all the computers were in Workgroup2, that "Workgroup" still showed up in Explorer under the list of networks, but only on the two XP machines. Netscan showed this group association as well, which I then realized was the E3000 itself, in its role as a [I]potential[/I] NAS server. However there was no storage device attached.
Could this in itself cause the access error? If so, should users be advised that if they don't plan to host any storage, that they should to go to the E3000 Storage Administration page and change the workgroup name to something other than their actual workgroup name?
In my case, I changed it to "Workgroupx", though perphaps something like "StorageGroup" would be more meaningful, especially if the Workgroup computers could still access any storage I might install in the future.
Anyway, I repeated my original approach (after the above change and a router reboot), and at least got my original Workgroup reestablished to the point where the XP machines not longer get access errors, and most machines can access the shares on the XP desktop. The steps I used on each machine were:
remove any shares I had set up on any folders
uninstalled the File and Printer Sharing service
Accessed Computer Name properties page to change the workgroup name
Shut Down
After all 4 were done, I reversed the process:
Started computer (now coming up in new Workgroup)
Reinstalled File and Printer Sharing service
Checked visibility
At this point, the XP machines could see each other, and the Win7 and Vista machines could see each other, but initially these two cliques wouldn't interact.
Next I re-added the shared folders on the XP desktop, and the XP netbook could see and access them. After about an hour, the Win7 machine joined this clique, and could also access the shares. But six hours later, the Vista machine is still clueless. Netscan shows everything of course, and I used it to set up a mapped drive on the Vista machine to one of the shared folders.
Other possibly relevant facts:
The was all working fine with the BEFRS41/WAP54G combo
I can ping all machines by IP address, but not by name
On the Vista machine I can set up mapped drives to the XP's shared folders, but again, only by IP address.
At one point I removed NWLink from the XP desktop. Now, nbtstat -r only shows the printserver's name being resolved.
The two XP machines, being SP3, lack the LLTD responder.
So,
Is it possible the NetBIOS in NWLink was providing some kind of name caching? If so, should I reinstall the protocol driver (I don't think it is available on Win7)?
Should I request and apply the KB922120 hotfix to get LLTD onto the XP machines?
Perhaps in the morning, "by name" access will have returned, as it did on my first go-round. Needless to say this has been a real pain, what with all the reboots required. At least now I remember to hit F8 so I can select Safe Mode with Networking... -
X301 "File and Printer Sharing for Microsoft Networks" removed at re booting (XP SP-3)
Even if I run the “Network Identification Wizard” (under System properties/Computer Name) to join a Workgroup, the box ‘File and Printer Sharing for Microsoft Networks’ remains unchecked. If I ticked it manually, it remains checked for the current session, but it is unchecked at booting.
The same occurs with the Windows Firewall (I am running that from Symantec). I switch the Windows Firewall off, but after rebooting, it appears selected again!.
This happens only with my brand new ThinkPad X301, which came with Vista. The package included a kit to convert to XP, but this installed a ‘naked’ XP, which required downloading from Lenovo and Windows about 1Gb of files (bad service, Lenovo guys!).
I wonder which “safety” issue of the X301 causes this, but how can I stop this happening? (It does not occur with any of my two old ThinkPads, also running XP SP-3 and Lenovo software).
Solved!
Go to Solution.See -> http://www.vistax64.com/vista-networking-sharing/72537-file-printer-sharing-turned-off-reboot.html Here is the text. Re: File and Printer sharing turned off on reboot
I FOUND MY SOLUTION!!!
In my case, it was in Lenovo's "ThinkVantage Access Connections" applet. It
is additional security that is applied at the CONNECTION level.
Here is how I fixed it:
1. Double click on the ThinkVantage Access Connections applet in the
notification area.
2. Click on the MANAGE button on the toolbar
3. Select the SSID where you want File Sharing to work, and click EDIT
4. Click on the ADDITIONAL SETTINGS tab
5. Next to "Network Security", click the SETTINGS button
6. The first option in Security Settings is "Disable file and printer
sharing". UNCHECK this box. Click OK for 3 levels of dialog boxes, then
close Access Connections
Although these directions are specific to ThinkPad notebooks, the same
principle may apply for other manufacturers' connection managers.
Best of luck! -
Problem with file and printer sharing
I just installed a Linksys WRT54G to replace a D-Link wireless router and cannot reestablish my file and printer sharing since replacing the router. I had file and printer sharing working fine before installing the WRT54G. All of the computers are running either XP Pro or 2000 Pro. I have two printers attached to one of my computers that I was previously sharing with all of the other computers on our home network. One is attached via a parallel port, the other via a USB port.
Here's what I've tried so far without success.
1. The IP of the WRT54G is 192.168.1.1, and the IP's it assigns to my LAN computers begin 192.168.1.XXX. The old IP of the D-Link was 192.168.0.1 and its LAN IPs were 192.168.0.XXX, so I've gone into my firewall and changed the settings for the range of trusted computers to correspond to the WRT54G's IP addresses.
2. I've tried uninstalling the printers and reinstalling them, including reinitializing printer sharing.
3. When I try to use the Windows "Add printer" wizard to add a networked printer, it can see the computer that has the printers attached, but it does not see the printers.
4. I haven't fooled around with the file sharing settings, but they've all be lost too, so I suspect there is a common problem for both printer and file sharing.
Any suggestions would be most welcome. I don't know what would be different about the WRT54G that would cause this problem.Try this to Enable File and Printer Sharing...Turn Off the Router Firewall...Make sure the Windows Firewall is also Off...
-
File and Printer Sharing problem
Message Edited by bartman_60042 on 11-13-2007 05:47 AM
Oops...somehow submitted without any text.
My set-up: Linksys Cable Modem with Linksys Wireless Router. 2 Desktop Computers (Black and Grey) and 1 Laptop. Windows XP SP2 with all current upgrades on each.
While setting up File and Printer Sharing, I have the following:
1) The Black computer can file/printer share from both the Grey computer and Laptop.
2) The Grey computer can only file/printer share from the Laptop; not from the Black computer.
3) The Laptop can only file/printer share from the Grey computer; not from the Black computer.
All 3 computers were configured the same as far as I can tell. The only difference I notice is that the Black computer boots without the XP 'login' screen (no password required), could this be causing the problem? If this is the issue, how would I change the settings to 'login' to the Black computer? Any thing else which may be wrong? -
File and printer sharing for Microsoft Networks on Windows server 2008
Hi Expert,
I found that the properties of File and printer sharing for Microsoft Networks service disabled after I install the windows server 2008 64bits. I tried to install that service via adding the file and printer sharing services in the properties of local area connection, but it doesn't contain any service in the popup box. Also, no such service file available in the disk when I tried to install the service from installation disk of windows server 2008 64bits. Is the file "sacsrv.dll" corresponding to the service name of file and printer sharing? I found it is in the directory of "Windows\system32". I have no idea about where is the problem? Do I miss some components? Please tell me what can I do for it? Thanks!
Best Wishes,Do any experts know the reason of this problem? Thanks!
-
Running XpHomeSp2. Just purchased a WRT150N to replace a failing SMC wireless router. Was able to share files and printers before replacement, now cannot. Microsoft Windows Network recognizes Local network by name after long, slow delay, but does not list any computers or shared locations or devices there when access attempted from main computer, but, oddly, list is possible from another network computer, but only the shares it offers to the network are accessible.
Only difference between now and prior is the router and that WPA security is invoked. Access is not granted when security is disabled. Have found no support for this issue anywhere. Also now note that Xp no longer lists Simple File Sharing in Folder Options, not that I'd used it in original sharing setup.
Anyone experiencing similar issues able to offer resolution?Your computer software firewall may be blocking the file and printer sharing. It was for me. You changed from a 'Trusted' network physical address to a new network physical address. Go into your software firewall 'Trust' settings and change the new address to 'Trusted'.
I had previously just disabled the firewall. Apparently that's not totally effective.
Hope this helps. -
File and printer sharing using Airport Express, usb HP Deskjet 3620 printer
I have a general question, and other forum users might have a good resolution for it - but if not, here's what i'm dealing with..
I have an Airport Express that I bought a couple of years back, it has all the necessary firmware upgrades, i'm running 2 Windows XP boxes going through a combination of Ethernet on 1 directly to the 2 Wire Home Portal 2701HG-B, and I also have an additional Netgear WGR614 v7. All firmware upgrades on all devices is installed and functioning after reset.. I've tried using a combination of the Windows XP built-in networking software, Apple Airport Utility, as well as Bonjour to get things configured and working right over the network. I've also installed the AT&T software, one is running the Mcafee security suite, and mine (the Etnernet box) is running the diagnostic utility.
I've tried defaulting all the firewall settings in either/or/all routers i've tried setting the Airport up with, and there still seems to be problems getting file and printer sharing to work right on all computers, and still remain safe behind the firewall. All the network hardware is set up with wpa2/psk authentication, and appears to be configured correctly.
The only version of the Apple Airport Utility that will run successfully on the systems, is the original version that came on the CD with the Airport. Both systems are completely up-to-date from Windows update, and are both running XP service pack 3.
I know for a fact, that the Airport is working just fine, as I've troubleshot all possible known hardware issues with it individually, hooked up to 1 pc (with current updates installed and running). Wireless works fine, i'm actually running the Airport utility on my main system in the living room, that's hooked up hardwired to the router. Both systems get online and surf without a problem going through either/or router as well. I've also tried dissabling the Windows firewall on both systems, and trying to set up file and printer sharing manually using the wizard, and that don't seem to resolve the issues either. However, both systems (wheather hooked up networked, OR individually), have both been experiencing some odd "quirks". The Ethernet box i'm on, has overwritten my primary HD, as "Athena" and made it unusable. The wireless box, has been giving simular "boot-up" related errors as well. I've checked the Cmos/DOS settings on both, and performed the suggested "boot-up" priority related tasks, and both systems are still experiencing problems. The Mcafee suite is up-to-date, and has caught several potentially dangrous programs running on the wireless box, hooked up to the Airport Express, INCLUDING the bundled HP diagnostic software.. However file and printer sharing still remains elusive...
Are there any suggestions about settings to check on the devices, or in the computers, to make sure it's all configured correctly?...Also file/printer sharing just flat out over the network is NOT a problem, as it's been configured before over ethernet through my Netgear router and file/printer sharing worked just fine.
The main problem seems to be in the Airport Express' settings, it will "get configured" and then lock me out of the utility to where I can't get back in..
The main Airport password has not been changed, and the wireless network encryption is the same for all wireless devices running on the network.
The main problem, just seems to be with the Airport.
Even the Home Portal has detected the Netgear router (unless it having my Netgear router saved in it's settings might be causing a conflict)... Suggestions?
I've contacted AT&T Home Networking for help already about the Home Portal, unfortunately they can not help me with other network related issues, since i'm not using the 2 wire wireless adapters offered by AT&T...
Message was edited by: okwolffcub -
File and Printer Sharing for Microsoft Networks is missing
I have a Server 2012 Hyper-V VM that is missing the File and Printer Sharing for Microsoft Networks. When I try to Install the service it is not listed. The only service listed is Windows Network Virtualization Filter driver. I have the install media but
I don't know where the driver would be located. I'm hoping someone can tell me where it is located.
Update:
I am trying to run Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server but it's not working and it's giving me this error.
Enable-NetAdapterBinding : No matching MSFT_NetAdapterBindingSettingData objects found by CIM query for instances of
the ROOT/StandardCimv2/MSFT_NetAdapterBindingSettingData class on the CIM server: SELECT * FROM
MSFT_NetAdapterBindingSettingData WHERE ((Name LIKE 'Ethernet')) AND ((ComponentID LIKE 'ms[_]server')). Verify query
parameters and retry.
At line:1 char:1
+ Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (MSFT_NetAdapterBindingSettingData:String) [Enable-NetAdapterBinding], C
imJobException
+ FullyQualifiedErrorId : CmdletizationQuery_NotFound,Enable-NetAdapterBinding
Vincent SpragueOk, fixed it, I found the netserv.inf file in c:\windows\inf and tried to use it to reinstall File and Printer Sharing. However File and Printer Sharing was not listed. I copied the netserv.inf file from another Server 2012 VM and was able to install File
and Printer Sharing using the copied NetServ.inf. After rebooting the server I was able to access network shares on the server.
Vincent Sprague -
E4200 Disabled File and Printer sharing
I just upgraded form a WRT 150N to an E4200 router. The main computer, a pc is attached to it with a wire. The other computers are wireless and laptops. The main computer runs windows 7. One laptop runs XP and the other vista. After the installation internet access worked normally. The network sharing and printing worked fine before installing the E4200. Now only the base computer can see shared files on the others. The two laptops cannot see shared files between them or on the base computer. Also the laptops cannot print to the printer which is hard wired to the base computer even though it can read the printer. This worked fine before the E4200 was installed. Your Customer service rep on the phone directed me to run tests and everything passed. She said it’s a file sharing problem not a Cisco problem and told me I had to pay Microsoft to solve the problem. She also thought the OS was reading the old router and there may be a problem there. She said she is not trained to solve these problems. Well if it worked before with the WRT1509N isn’t a Cisco problem?
Does anyone have a solution to this?
Please, please help.
FrankDo any experts know the reason of this problem? Thanks!
-
File and Print Sharing over wireless
I have the following hardware:
MBP - Brand spanking new kickin' machine running 10.4.x
G4-400 - old but still doing nicely running 10.3.9
PC running XP
MBP has the extreme card built in
G4-400 has a third party wireless card that's been working for 2 years
PC has a netgear wireless card
Router is a netgear WR814v2 wireless B
Facts: Before I bought the MBP last week, I could access files between my G4 and PC fine over my network and access the web at the same time. When I connected the MBP to the network, I could surf. When i tried to turn on filesharing, it works for a short time, but then knocks the network offline. The model still shows a connection and my router still broadcasts and the wireless cards all get the signal, but nothing connects.
To troubleshoot the issues, this is what I've done so far:
When it went down, the first thing I did was turn file and print sharing off on both of the macs, restarted and tried the connection. Again, model still shows logged in, but no connection. Then i plugged the PC into the ethernet port on the router to get a wired line. Still no connection on the PC. Next, I shut down the macs, disabled the wireless on the PC and restarted the PC. Still no connection through the ethernet port even though the model and router still show all signs good. Also, through all this, I couldn't log into the router's IP address once I was wired to it. Next I shut down the router and modem, waited, then turned on the modem, waited for it to cycle to ready, then turned on the router. The modem showed that it was connected, then the router showed wireless broadcasting. Then I had my connection to the web back.
I then went back to square one and tried file sharing again and again everything locked up. It seems like some how the file sharing between the macs is confusing the router. I tried fixing the ip address that the router assigns to each machine, but that didn't solve the problem. I'm at my knowledge's end. What am I doing wrong here? My goal is to share files at least between the macs and print through the G4 which has a USB and a Firewire printer attached. I'd like to accomplish the filesharing while still being able to access the web. But for some reason, I can the file sharing up and running for a short time, but then everything falls apart and locks up.
MBP Mac OS X (10.4.6) G4-400 and PC also on networkI figured out the networking mess - the secret, don't follow the instructions on the apple site - listen only to everyone in this discussion. I kept following the instructions to turn on appletalk and that's what was tying everything up. When I just use the sharing preference panel without going into the network preference panel, all is good in the world. I can now view all three computers with their shared folders(enhanced by sharepoint for a couple of external drives) and also print from all machines to the printers hooked up to the G4.
PowerPC G4 400 Mac OS X (10.4.2)
Maybe you are looking for
-
How do I make a playlist to resync my ipod?
a couple weeks ago i was adding songs onto my ipod and i added too many *not enough room on my nano*, and my ipod added a new playlist to sync with *with only some songs on it*. i didnt like that idea so i deleted it. then my ipod was wiped clean, wi
-
Hello folks I've tried every option I can to self support, from disk repair to deleting caches (I don't usually use the appstore so don't have one), and I don't have a pckge file either. I'm on a corporate network that restricts access to iTunes, so
-
Register Website Host Directory Problems
I'm trying to register a website for ICE and cannot make it past the Register Website dialog box. The site does not have a host directory and in DW I've successfully uploaded all the include files and created the templates, pages, etc. However, while
-
How to get configuration file name of WLC2112 to carry out a backup
Hi, I need to get a backup of configuration file from AIR-WLC2112-K9 (7.0.98.0), checking the procedure (uploading configuration file) I need the name of the configuration file. I try to get the file's name by command but I could not find any comman
-
Bill in credit after leaving network
Hi I keep recieving a bill saing my account is in credit after leaving. How can I claim this money back? Regards Paul