File sharing between windows PCs creates tmp files that are locked

Hey everyone. This is bringing an old topic back from the dead. Over the weekend we upgraded to Leopard Server 10.5.4 and am now seeing this same exact problem that was discussed here and never answered: http://discussions.apple.com/thread.jspa?threadID=1290360&tstart=237
Whenever a windows user opens a word document via smb it creates as follows:
On a file called 'test save.doc', having been opened in Word, amended and saved I would end up with the following files.
~$st save.doc
~WRD0000.tmp
~WRD0001.tmp
test save.doc
These temp files are locked and can't be deleted from the users machines. they have to be deleted from the server hosting the files. Permissions are set thru ACLs and access to folders and files are working accordingly. But for some reason these temp files are being created on every word document that is opened and aren't being automatically removed after closing the document
thanks for any help!

the change that I made was to /etc/smb.conf
acl check permissions = no
I stopped the samba service, put that into /etc/smb.conf and restarted samba services.
all seems to be well on the open frontier. hope this helps someone out

Similar Messages

File Sharing between Windows PC and MacBook Pro using Internet Sharing

I have a MacBook Pro and a Dell Latitude D820 running Windows XP SP2 and I want to connect both using any of these two options. I do not have a wireless router and I use Sprint 3G data card to access internet.
1) I access the internet using a EVDO data card on my MAC and use Internet sharing to access the internet on my Dell laptop. How do I access the files on my PC from my MAC?
2) I can have two EVDO data cards to access the MAC and PC independently. How can I setup file sharing between Windows laptop and MAC?

Hi Dr. Poultry-
This may be helpful: Mac OS: Connecting to the Internet and sharing files locally at the same time
Luck-
-DaddyPaycheck

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix issues I had fixed in the single files. I need suggestions on what else can be done if any. Using Acrobat pro XI.

Out of habit, I tend to combine PDF files in the Page Thumbnails pane by right-click then "Insert Pages" -> "From File". For me, this preserves the tags from both documents, although the tags may have to be moved into the right location (if I recall correctly the tags for the inserted pages get put at the end of the tag structure, regardless of where the pages are inserted), If I first put the tags for the document to be inserted inside a container tag like Section, it makes the process easier. Moving that set of tags to the right place is the only re-fixing that I recall having to do. What behavior are you experiencing?
a 'C' student

What are the .fm.sp files that are created when using SharePoint?

What are the .fm.sp files that are created when using SharePoint? When I'm working with SharePoint, I've noticed that duplicate files ending in .fm.sp are created. I've been unable to find any reference or documentation about them so far.

Whe you use sharepoint as a CMS connections in Framemaker it creates the folder where Sp is installed and also a file ending .sp is created that let SP know that its the file associated with it.
.fm.sp indicates that its the framemaker type SP file.
Dont worry about it as its not creating any mess in the system.
Harpreet

HT5372 Is iCloud tab not shared with Windows PCs with Mac or iOS operated devices?

Is iCloud tab not shared with Windows PCs with Mac or iOS operated devices?
I have iPad mini with iOS 8 and a PC with Windows 7 .
I'm trying to set up iCloud. and installed on both but can't see shared devices.

I think you have to use internet explorer to login to icloud.com on your windows pc to see the content.

How get files that are in Windows directory from a job is running in AS400

Hi Experts,
Please help me with this, I have a background job that call FTP_CONNECT for connect to a FTP directory, when i run manually the program this works very good; but when is runing like job it isn't works; SAP is in AS400 and the FTP directory is in Windows, also i tried use the CL_GUI_FRONTEND_SERVICES for access to the directory but it isn't works like job.
The big question is How i can get files that are in the Windows directory from a job that is running in AS400.
Is anyone can help me? Thanks for your kindly support in advance.
Best Regards,
Darwin Panchi

It's impossible to access Windows directories running through job. To do this, the files must be transfered to Unix.
Not true. You can mount a Windows server folder location in the SAP AS400 directory landscape and access it from SAP programs in the foreground or the background. You can also hit a Windows client or server location with FTP as well.
For Darwin, if the Windows location belongs to your domain, have your Basis team map it to your SAP app server folder landscape so you can access it directly or as Este suggested, try the background destination SAPFTPA for the FTP approach.

On Windows 7, neither my quicktime or iTunes will start. This started after I installed the newest update. All the files that are needed are there. I recently updated Quicktime to see if that would work, but it didn't.

This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?

This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?

Hyperlinks to XLS, DOC, and PDF files that are included in a .chm file work intermittently.

SUMMARY
Hyperlinks to XLS, DOC, and PDF files that are included in a
.chm file (and the Baggage Files) only work intermittently. The
only solution appears to be deleting the Temporary Internet Files.
PROBLEM
1. I place the XLS, DOC, or PDF file in the Windows
sub-directory that corresponds to the RoboHelp project sub-folder
where the topic in which I’ll place the hyperlink exists.
2. I open the help project in RoboHelp HTML.
3. I right-click on the project’s Baggage Files
sub-folder that corresponds to the Windows sub-directory in which I
placed the XLS, DOC, or PDF file (in step 1).
4. I import the XLS, DOC, or PDF file.
5. I open the topic in which I’m going to place the
hyperlink in the WYSIWYG editor.
6. I “drag and drop” the Baggage File into the
topic (in the WYSIWYG editor) to create a link to it.
7. I save the changes and then generate HTML (.chm) help.
8. I open the .chm file and click the hyperlink. The XLS,
DOC, or PDF file may or may not open.
9. When the hyperlink works correctly, for DOC and XLS files,
a “File Download – Security Warning” dialog box
appears asking, “Do you want to open or save this
file?”. The buttons that are available are
“Open”, “Save”, and “Cancel”.
These buttons work then as one would expect. (When the hyperlink
works correctly for a PDF file, it simply opens the PDF file in a
new window; there’s no prompt to save, open, or cancel.)
10. When a hyperlink does NOT work, for DOC, XLS, and PDF
files, no dialog box or other visual message is displayed. Instead,
the sound that is associated with the “Exclamation”
program event is played (the “Windows XP
Exclamation.wav” file is the WinXP default).
Other Notes:
- The hyperlinks ALWAYS work when I view a topic using the
“View Selected Item” function (Ctrl+W) in the RoboHelp
HTML project.
- Once a hyperlink stops working, it will not start working
again until I delete all the Temporary Internet Files.
- A hyperlink will stop working even if Internet Explorer
(iexplore.exe) is closed the entire time.
WORKAROUND
Through trial and error, I have discovered that if a
hyperlink stops working, I can get it to work again using the
following steps:
1. Leave the .chm file open.
2. Open Internet Explorer.
3. Click Tools>Internet Options….
4. From the “Internet Options” dialog box, select
the “General” tab.
5. Under the “Temporary Internet Files” section,
click the “Delete Files…” button.
6. From the “Delete Files” dialog box, select
“Delete all offline content” and then click
“OK”. The files are deleted and the “Delete
Files” dialog box closes.
7. Click “OK” to close the “Internet
Options” dialog box.
8. Without closing Internet Explorer and without re-starting
the .chm file, all the hyperlinks that didn’t work before
will now work.
GENERAL SYSTEM INFORMATION
- Windows XP Pro, SP2
- Internet Explorer 6.0.2900.2180
- RoboHelp X5, 5.0.2 Build 801
- HTML (.chm) help project files exist on my local machine
- HTML (.chm) help file is run from my local machine
- Project is under RoboSource version control
TEMPORARY INTERNET SETTINGS
- “Check for newer versions of stored pages” is
set to “Automatically”
- “Current location” for the Temporary Internet
files folder is set to “C:\Documents and Settings\My
Username\Local Settings\Temporary Internet Files\”
- “Amount of disk space to use” is set to
“594” MB
“View Files…”
- An XLS or DOC file will be listed here if I click its
hyperlink and then click either “Open” or
“Save” from the “File Download – Security
Warning” dialog box.
- A file will appear here even if I click “Save”
and then click “Cancel” from the subsequent “Save
As” dialog box.
- If I click “Cancel” from the “File
Download – Security Warning” dialog box, the file does
not appear in the Temporary Internet Files folder.
- When a file does appear in the Temporary Internet Files
folder, its Internet Address is displayed similar to the following:
“ms-its:C:\PrimaryProjectFolder\ProjectName.chm::/SubFolderName/FileName.xls”
“View Objects…”
Here’s a list of all the program files that appear:
- “Microsoft Office Template and Media Control”
(Last Accessed 12/13/06) (Version 12,0,6024,0)
- “Shockwave ActiveX Control” (Last Accessed
12/14/06) (Version 10,1,4,20)
- “Shockwave Flash Object” (Last Accessed
12/18/06) (Version 9,0,28,0)
- “Windows Genuine Advantage Validation Tool”
(Last Accessed 12/14/06) (Version 1,5,722,0)
- “WUWebControl Class” (Last Accessed 12/13/06)
(Version 5,8,0,2469)
Today is 12/18/06 so the only program file that is listed as
having been “Last Accessed” today is the
“Shockwave Flash Object”.
REQUEST FOR HELP
I really want to include certain PDF, DOC, and XLS files in
their native format in a .chm file. However, I need a better
solution to my problem than the one I discovered. What I really
want is to avoid the entire problem altogether.
Have anyone seen this before or have any suggestions?

You wont be able to do that. The embedded objects would appear as images only.

How do I erase the "other" files that are occupying my computer

I already deleted pics, music, etc and I am ready to continue to delete unnecessary files. How should I erase the "other" files that are in my computer. Please, advice. Thanks

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Can't see files that are backedup

I have a G4 iMac that has both an internal (small) and external (large) drive that I use for data. I am using a time capsule to backup the whole system.
When I run Time Machine it appears to backup both disks, the log file shows both drives having many GBs of data being transferred without any errors.
However, when I go into the TM application, I can only see files that are on the internal drive. I can only see my external 'LaCie HFS' in the Now view, going back in time that drive is greyed out.
If I use the finder when the TC is mounted, I can traverse into 'Backup.backupdb/iMac/2009-08-074700' and I can see the 'LaCie HFS' folder and in it are all my backed up files.
I have looked through the FAQ and various postings but cannot find an answer.
The closest thing that I can see as being a potential problem is that my old internal drive uses an Apple Partition Map while my new external drive uses a GUID Partition Table.
Why would backupd created backups that Time Machine cannot see?

Hi, and welcome to the forums.
Try this: Open a Finder window and press ShiftCmdC (or select your computer name in the Finder Sidebar).
Then +Enter Time Machine.+
On the first Finder window in the "cascade," labelled Now, you'll see all the volumes currently attached to your Mac.
Select the Finder window for any backup, and you'll see a folder for each drive/volume that was backed-up, including any that are no longer connected. Navigate from there to whatever you're looking for.

HT1351 Whether or not I sync items on iTunes to my ipod, I cannot eject the ipod because a message keeps coming up and saying that my ipod cannot be ejected because it contains files that are being used by another application. How do I fix this?

I just got an ipod classic 7th generation a couple days ago and I'm having a heck of a time with it. My latest problem is that with media on iTunes, I cannot eject the ipod because it says that it cannot be ejected because it contains files that are being used by another application. What application is this, and what do I do about it?

Hi newipoduser,
Here are some possible solutions:
Do you use musicmatch jukebox on your computer? If you do, you have to go into task manager on windows and end process mim.exe. It interferes with disconnecting ext devices
Empty your "trash/recycle bin."
If that doesn't work, try quitting all your programs, especially music-type programs, basically things that look for mp3's etc.
if that doesn't work, "log off" then "log on" and that should refresh/purge your OS system.
Finally, you can restart your computer.
Hope one of these helps!
Cheers,
GB

Itunes is copying/converting 500gb of music from .wma to .m4a files that are on an external drive onto my laptop which doesnt have enough room. how do i reroute these newly converted files somewhere with enough space for them?

itunes is copying/converting 500gb of music from .wma to .m4a files that are on an external drive onto my laptop which doesnt have enough room. how do i reroute these newly converted files somewhere with enough space for them?
new to itunes, used windows media player before that and always ripped music directly to an external hardrive and accessed it through the player. now that i downloaded itunes it is taking from the external hardrive and copying a second file for each song onto my lap top hard drive which does not have the capacity for all my music. as itunes converts music files i want them saved back onto my external drive or another location i have space for rather than the lap top. how do i change the setting to move the itunes media folder to another location. assuming that hitting copy and past and dropping it in a random location will cause a few errors.

When I have done this, all I did was network the two machines and copy the contents of the iTunes folder to the other machine, and that's it.
My understanding (which may not be 100% correct) is that the one file that is absolutely necessary is iTunes Library, and that the XML file is actually a copy auto-generated from the iTunes Library, appearing in a different format only for non-iTunes apps that take advantage of the iTunes Library data.
As far as I know, if you simply have the Library (database) file and all your original music files, iTunes on that computer should operate as it did on your old computer. I believe that the Album Artwork, Genius Data, and XML files can be regenerated from the Library file. Not sure about the Extras file.

Can't open files that are downloaded

Hi,
I can't open up the files that are downloaded. When I try to open them up, they all say "the file may be corrupted". What's going on and how can I fix this?
Thank you

I am having trouble opening .dmg, .xls, and .ppt files. Most recently I tried to download a printer driver from the HP website that is a .dmg and it opened a window to save a binary file and saved as a Quicktime file. The .ppt file was a forward in an email and the .xls file was a file from another Mac. I have no idea why this is happening.

Ipod cannot be updated because it contains files that are in use by an

My fifth gen/30 ipod is a mess since I installed itunes 7.I can't update or eject the little guy .The message reads"cannot be updated because it contains files that are in use by another application"or "cannot be ejected because it contains files that are in use by another application" Any help would be very appreciated!
Thanks!
dell Windows XP 30 gb video

I had the same problem. I had to uninstall 7.0 and install 6.0 and was able to restore OK. I'm back using 6.0, but just got a second generation ipod nano, so I have to go to 7.0 or greater. My only words of wisdom are DO NOT SET ANY LOCKS until you are really sure you want to. Also with 7.0 I could not eject my ipod unless I went to the "safe to eject ipod" command. Apple has some problems to work out and I hope soon. Clumsy as best...............
Dell Demension 8100 Desk Top Windows XP

Cannot update ipod due to files that are in use by another application

Uploaded iTunes version 7 onto my PC on Friday. Ever since my fifth generation video (30GB) ipod cannot be either updated with version 1.2 software, syncronised or restored due to the error message "The ipod cannot be updated becuase it contains files that are in use by another application".
Not sure the issue is related to the itunes upgrade but it is a strange coincidence.
Also having a problem becuase my pc runs outlook 2002 which is not compatible with itunes 7 and my calender cannot be syncronised. Don't know whether the two issues are related.

Kudos to Randy. Thanks a lot; this worked for me. I simply opened itunes (and minimized it) with my ipod connected, opened "My Computer," right-clicked "IPOD" and ejected it. As soon as the icon in My Computer showed that it was ejected I quickly maximized itunes, clicked IPOD, and clicked the update button. Wah lah! iPod updated. Hope that helps the rest of you out there with this problem! Thanks again!
Windows XP

File sharing between windows PCs creates tmp files that are locked

Similar Messages

Maybe you are looking for