File sharing from 10.5.6 (iMac G4) to Windows computers

I recently upgraded to OS 10.5.6. Before that I was on 10.3.9 and I was able to see and access all computers on my cross-platform LAN (2 PCs and 2 Macs). My router shows that all computers are connected and has assigned IP addresses for each and I see and can access both PCs from my Mac BUT I cannot see either Mac from any Windows computer. File sharing is turned on in System Preferences.

I am going through the same thing. I got a support person who actually helped me with this. The issue is that the underlying way in which the Macs find each other has changed. The network code truly is incompatible. But you can cope, so long as you know the IP address within your LAN.
Go to the Finder and open the "Go" menu up there in the top menu bar. Select Connect to Server and type in the IP address of the machine you need to connect to.
In the Finder preferences, make sure that Computer is one of things that shows up in the left hand panel. Click it. On Computer, you'll find Network and clicking on that should now show the machine you just entered.
Notice that if the IP addresses happen to get shuffled around by the router, you'll have to set up the connection again.
At least, "it worked for me". I got access to my 10.3.9 machine from the 10.5.6 machine and can see all the files. (Can't yet figure out how to do remote printing to a non-network printer attached to the 10.3.9 machine though. It would probably be easier to walk upstairs...)
I tested this with Macs, not Windows. But I bet the same issue holds.
Best of luck.

Similar Messages

  • Can not login to file sharing from iMac

    I have been trying to connect through the bluetooth feature to File Sharing from my iMac to my MacBook Pro.  I use the same password for login to my computers and for my File Sharing connections. For some unexplained reason; whatever password I enter when trying to connect from my iMac to the MacBook, it is rejected. I attempted to Change the Password. I entered what I have always used as my password and a new password. That was rejected. I assume because the "old password" was not recognized.
    How do I go about establishing the correct password on my iMac to connect to my MacBook. I can log off my MacBook, and restart with that password; so I really don't understand what's going on.
    Please advise.

    I read many threads about similar errors while connecting to BI Publisher I tried this:
    - Patch KB908002 (.Net for develosper) and didn't work
    - Patch KB907417 (office 2003 for client). Didn't work too.
    I changed to a vitual machine with Windows XP and Office 2007. Everything is working just fine.
    I think the problem with Publisher Desktop 10.1.3.2.1 (connection with BI Publisher) has to do with Windows Vista or Office 2003 (both installed on my pc). I'll install Office 2007 on Vista and see what happens.
    I'll post results.

  • File sharing between Mac Mini and iMac "breaks" after reboot of either device, and won't restore.  Why?  Running Maverick 10.9.1 on both.  File sharing is setup on both.  Help.

    I'm a new user - recent convert from longtime Windows to Apple.  Thought having desktops and computing aligned with phones and tablets would help.  Not so far.
    I have a MacMini running Mavericks 10.9.1, and an iMac running Mavericks 10.9.1.  File Sharing is set up on both.  If either device is rebooted for any reason, file sharing from the Mac Mini to the iMac "breaks" and will not easily restart.  Various things eventually brings the connection back - usually having to do with checking and unchecking File Sharing, the AFP button, and/or the SMB button on the iMac - but never the same procedure twice in a row.  File Sharing from the iMac to the Mac Mini is never disrupted - always comes back up without a problem.  Screen Sharing also works between both without fail, and comes up after reboot of either.  No problem there.  Only difficulty is from Mac Mini to the iMac. 
    Why?  Any ideas? 

    Should also clarify - usually takes multiple hours of checking/unchecking file sharing settings in order to restore the share between Mac Mini and iMac.  NEVER happens automatically.
    This is disruptive because I've got the Mac Mini pointing to several file locations on the iMac for various things - photos, music, etc. - and they all hang up unless the share is restored.  Real bummer.

  • Can I connect a PS3 wirelessly using internet sharing from my ethernet-wired iMac. It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

    Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac?  It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

    Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac?  It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

  • I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library.  I can open library as a refernce library but cannot import onto hardrive as managable files  Tried to do as a backeup t

    I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library.  I can open library as a refernce library but cannot import onto hardrive as managable files 

    I may be misreading what you are trying to do but you don't import libraries via the import window. You use File->Import->Library..
    If this doesn't resolve your problem post back with more detail of what you are doing and what is happening.
    regards

  • Is there any way to block PDF files sharing from iPad to any another device or cloud? We need to have certain PDFs visible and readable only from iPad.

    Is there any way to block PDF files sharing from iPad to any another device or cloud? We need to have certain PDFs visible and readable only from iPad.

    There are "container" apps emerging for the iPad.  Enough searching & I suspect there would be one for your needs. 
    All in one Application that emphasize security
    Good Collaboration Suite  Secure mobile app-to-app collaboration.
    The Good Collaboration Suite includes Good for Enterprise, Good Share and Good Connect secure mobile apps, simplifying access to email, calendar, contacts, tasks, instant messaging, browsing and document sharing. These apps are built using Good’s next-gen containerization   that includes secure data sharing between any Good secured app as well as app-level encryption independent of the device used."
    http://www1.good.com/applications/

  • HT1660 How I do file sharing from computer to ipad

    How I do file sharing from computer to ipad it is not showing in iTunes since I new update iTunes 11
    I can't do it can you please help me out
    Thank you

    You might try Instashare.
    http://thenextweb.com/apps/2013/02/24/instashare-is-like-airdrop-on-ios-launches -on-ipad-to-make-local-file-sharing-effortless/

  • I am unable to read signatures on PDF files sent from my Los Angeles office - they use windows, any solution?

    I am unable to read signatures on PDF files sent from my Los Angeles office - they use windows, any solution?

    Hey guys,
    So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
    Aaisha

  • Airport Extreme is allowing access to screen sharing, file sharing from external IP addresses (some from China, Canada etc)

    How to get control over the ports/port forwarding etc in Airport Extreme?
    How to make AE drop packets to certain ports from external ports.  Or create whitelist/blacklists?
    I figured out where the MAC filtering is!  (It is inside the Timed Access Control).  I wish it had a list of connected device and allowed me to select, name and add them.
    I am getting requests from Chinese IP to the screen sharing ports forwarded to my iMac.  Had requests to other ports as well.  There was one IP address from CANADA too.
    I want to open file sharing for local use only.

    Why is Airport Extreme forwarding requests for screen sharing from external ip addresses to my imac?  I don't have a public address, nor use dynamic dns service, and I have removed the server app (at least I think I have, but Apple Store doesn't think so).

  • File sharing from Mac to PC

    Hopefully someone out there will be able to help me with this issue.
    For the life of me, I cannot share movies stored on my iMac with any other device except my Apple TV.
    I currently have most of my movie library archived in iTunes (90+ movies) that I converted to .mp4 or .mv4 using Handbrake. All of the movies are available on my AppleTV. I have three networked PCs, one ethernet, two wireless. I have enabled file sharing to all computers. I have installed iTunes on the wired PC as well as one wireless PC. I can share my iTunes music (but no video) between the iMac and PCs.
    All three PCs are Windows XP SP2 machines. I can navigate to the movie folder located on the Mac on any computer. I cannot open any movie file. I can open and access shared PDFs, spreadsheets, word documents, pretty much anything I have access to EXCEPT the movies.
    I CAN copy the movie from the host Mac to any PC with no issues. Then, Quicktime will play the movie. But, no matter what I try, I cannot stream the movies to any other device, except the Apple TV. (There are no movies stored on the Apple TV. I have a Time Capsule managing a wireless network that streams movies with only a few seconds delay.) I could see there being a time lag streaming a movie to a laptop with 500mb RAM and a G wireless connection, but the wired PC is connected with ethernet. It WILL allow me to copy a 2Gb movie from the iMAC to the PC in less than three minutes.
    I initially only had "Read" permissions on the folder in question, but I did try "Read and Write" access to see what happened. Nada.
    I cannot find a definitive answer as to sharing movies with iTunes. But, even if iTunes will only share music libraries, I still think that I should be able to stream movies by accessing the file directly. The wired PC is in my daughter's room, and I would like her to be able to stream movies from the iMac. If I navigate directly to the folder in question, one of two things happen. If I try to open a .mp4, I get "Error 50: An unknown error occured" If I try a .mv4, iTunes will open, but nothing happens. I can view the movies playlist under my shared library, but nothing happens when I attempt to open one.
    Eventually, I would like to softmod a used XBOX my sister gave me to stream movies on the iMac to another TV. I even tried XBMC on the wired PC to act as a media manager since iTunes would not pull movies off the network. It will find the movies, but it will stall (I did not let it keep trying after 15 minutes of "buffering" a movie.)
    I know I'm not the only one trying to share a library. Even if iTunes will not let me do it, I should be able to set something up so others on my LAN can access these files.
    iMac specs:
    2.4 GHz Intel, 2G RAM
    OS X 10.5.5
    Wired PC specs:
    1.99 GHz Intel, 384mB RAM
    XP SP2
    XP SP2
    Any suggestions? I don't have another Mac to attempt this with, but if 3 PCs have the same failure, I suspect it's either how my network is set up, file permissions on the iMac, or just a fundamental flaw in the way I'm trying to resolve this issue.
    Any help or suggestions are greatly appreciated!

    Wow! No one has any suggestions?
    It has been suggested that Quicktime streaming will only work with Apple hardware. Can anyone tell me if iTunes will allow sharing video from a shared library, even if only Mac to Mac?
    I'm beginning to suspect that is the case. In the meantime, I will try sharing a VIDEO_TS file using a media player on the wired PC to see what happens.
    Or, if I'm good, perhaps I can get someone to bring a MacBook over one evening to try this with.
    More to follow.

  • File sharing between mac mini and iMac

    can I share files on my iMac with the Mac Mini wirelessly so I can view them on my HDTV without transferring files to an external hard drive and then connecting the hard drive to the Mac Mini? Or better yet, can I use the Mac Mini to mirror my iMac so I can work on the iMac from the comfort of my recliner in front of the big screen?

    The short answer is "yes." 
    You will need to enable file sharing.
    When you open the finder on the mini you should see your iMac listed under "Shared" on the left hand side.  When you click on it you will initially see just the public folders.  If you open one all you will see is the drop box.  To get to your files on the iMac click on the "Connect As..." button on the upper right of the finder window.  Log on with your iMac user/password.  Now open your public folder and all your files will be available.
    Dan

  • Transferring Files via File Sharing from 10.4.11 to 10.8.5

    I am trying to get all of my files and information off of my laptop and migrate them to my new iMac. I have followed the instructions in regards for file sharing. However, when I bring up the finder and click on shared, the only thing that it will do is log me in as a guest. When I try and type in the password to log me in as a registered user it tells me that the password is wrong. Unless there is another password that I am unaware of I am 100% sure that I remember the password. Any help would be greatly appreciated.

    mwheelsnyc wrote:
    I am trying to get all of my files and information off of my laptop and migrate them to my new iMac. I have followed the instructions in regards for file sharing. However, when I bring up the finder and click on shared, the only thing that it will do is log me in as a guest. When I try and type in the password to log me in as a registered user it tells me that the password is wrong. Unless there is another password that I am unaware of I am 100% sure that I remember the password. Any help would be greatly appreciated.
    Check out the following:
    Setting-up a new Mac from an old one, its Backups, or a PC 
    Using  Setup  Assistant  on  Mountain  Lion  or  Lion

  • File sharing is not working between iMac and MacBook

    I had been sharing files between my iMac and MacBook.  My settings haven't changed and all of the sudden my shared files aren' t showing up in the sidebar.  Firewall settings show to allow file sharing. 

    I had much the same problem except that it was a PB running 10.4.11 to a G4 running same.
    Check this article - http://www.macosxhints.com/article.php?story=20070226213016446
    The PB could connect to an iMac with no problem and the G4 could connect to the PB and iMac and vice versa.
    Turns out that com.apple.ByteRangeLocking.plist had been deleted from the G4 Root Library at some point. Copied it from the user preference file and everything now works again.

  • File Sharing between macbook pro and imac

    Hello,
    I'm having trouble with file sharing between my bankbook pro and my new iMac. I want to share some photos on my iPhoto library from my macbook pro and transfer them to my iMac. I've turned on file sharing and tried connecting, entered in my username and password, but it won't connect. I've tried several times with the correct username and password combination, and the box just shakes and denies entry. I've even tried connecting as a guest user and it says "access is denied, contact system administrator." Can anyone help? I've upgraded to Yosemite on both computers.
    Thanks in advance.

    I've done everything that you've recommended, however, I am still having trouble sharing files between my macbook and iMac. I even tried using airdrop to transfer files, but nothing seems to be working. I've made sure the firewall options are what they're supposed to be and everything. Whenever I try to login as administrator to file share, it won't accept my password. I don't know why airdrop isn't working either.

  • File sharing from OS 10.6.5 to host 10.5.8

    I've been trying to connect/fileshare from a macpro (os 10.6.5) to a macpro (os 10.5.8). I keep getting the error "Connection Failed" I can "see" the 10.5.8 computer but cannot connect. However the 10.5.8 can connect just fine to my 10.6.5
    file sharing is turned on on both computers.
    any ideas?
    Thanks

    Same problem with a new 2011MBA 11.6" on 10.6.5 and a 2008 MBP 15" on 10.5.8.
    I can open MBA from MBP, and share files with no problem, but other way around, can't get the MBA to connect to the MBP.
    Anybody from Apple listening here ?

Maybe you are looking for

  • TS1567 Iphone is recognized in windows but not itunes 11

    Iphone is recognized in windows but not itunes 11

  • Video pauses in windows 8.1?

    Hello, I just upgraded to windows 8.1 (probably should of known better) Tried diffrent sites, what happens is that the video pauses for a  split senond during the video, this happens several times depending on how long the video is. I have 12 gigs of

  • Create Title from File Name

    Is there a way to automatically transfer the file name to the title of the image? Can it be done with a script in the export cations folder? If it can, does anyone have a script?

  • Java Printing and Dot Matrix printer

    I'm not sure if this is the right forum, but I didn't see any forum about printing. I have gotten printing working for my application to both "real" printers and dot-matrix printers. The problem is that I want to display a print dialog box, and have

  • Usb sound output with integrated 100W amplif

    Hi, I would like to see a extensible USB audio device with integrated 00W amplifier. I should be able to connect for every room in my house such a device. The audi source schould not be fixed to one computer. I should be able to select different audi