File Sharing Service keeps crashing Error Reading Settings, File Sharing Service keeps crashing Error Reading Settings

File sharing service keeps popping up with the error message An error occurred on the server while processing a command.  This error occurred while processing a command of type 'getConnectedUsers' in plug-in 'servermgr_afp'.
I have tried multiple solutions on this site, unloading afp and restarting it, restarting postgres.  The file sharing tab will show up for a few seconds on the server.app config page then once someone tries to access any of the shared volumes on there, the event log shows it crashing instantly.  Error in console:
The server '127.0.0.1' reported an error while processing a command of type 'getConnectedUsers' in plug-in: 'servermgr_afp'.  Error: Error Domain=XSActionErrorDomain Code=0 "SETTING_NOT_FOUND_ERR" UserInfo=0x7ffe6a835060 {NSLocalizedDescription=SETTING_NOT_FOUND_ERR}
Also I get the error com.apple.launchd: (com.apple.collabd.notifications[7520]) Exited with code 1 then always followed by Throttling respawn: Will start in 10 seconds and this happens every 10 seconds without fail.

I have started getting this error this morning:
This error occurred while processing a command of type 'getConnectedUsers' in plug-in 'servermgr_afp'.
Using Server 2.2.2; MacMini running OS X 10.8.5, 2 GHz Core i7 with 8 GB RAM attached to a 12TB Pegasus RAID.
When the error appears, my users cease to be able to access file shares.
Often, just before the error occurs, my users experience substantial slow down in the Finder's responsiveness when manipulating files on those shares.
Restarting the Server App will produce one of several results
1. fix the problem (rarely)
2. fail to connect to server
3. connect to server but not get all services running.
The system itself resists a full shutdown, hanging at the grayish-white screen (not spinning wheel or cog or apple logo).
I wish there was some known fix for this.

Similar Messages

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

  • [svn] 3519: Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service .

    Revision: 3519
    Author: [email protected]
    Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
    Log Message:
    Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
    Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
    Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    Added Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xml

    Hi,
    Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
    What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
    What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
    some port while in reality there isn't.
    I'll eventually contact Microsoft Support, thanks for the suggestion.
    ▼
    ▲

  • Contribute could not read the shared settings file.....

    We are using Contribute 4 via FTP connection. Suddenly, I
    have one user today that is getting the following error when trying
    to connect to things she should have access to.
    The error: "Contribute could not read the shared settings
    file for this Website because the file has been corrupted. To
    re-create the shared settings file, an administrator must
    administrate the website again."
    As a sidenote, this user had recently been sent approximately
    41 files for review, I have no idea if there is a connection or
    not. This feature has worked fine for them before.
    Anyone see this problem before? I did check and I have other
    users that can access and edit the Website just fine. It seems
    specific to this one user.
    Thanks - Lainie

    I think this has something to do with the PNG plugin.

  • I want to share files from iMac to MacBookPro.  In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service."  What do I need to FIX???

    I want to share files from iMac to MacBookPro.  In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service."  What do I need to FIX???

    Care to share which OS you are using? 
    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 

  • I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem-.thanks

    I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem….thanks

    If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

  • I am using Adobe Reader with paid up service through May 2015.  When I attempt to convert a file from PDF or to PDF, I get the message "An error occured while trying to access the service.  What do I need to do to access the service paid for?

    I am using Adobe Reader with paid up service through May 2015.  When I attempt to convert a file either to PDF or from PDF, I get the error message, "An error occurred while trying to access the service".  What do I need to do to get access to the service I have paid for?

    Hi DeaconTomColorado,
    Please see "Error occurred when trying to access this service" when logging on to Acrobat.com.
    Adobe has just released an update to Adobe Reader, so if you're accessing the service via Reader, please let us know whether the update helps resolve the issue.
    Best,
    Sara

  • Can I connect a PS3 wirelessly using internet sharing from my ethernet-wired iMac. It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

    Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac?  It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

    Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac?  It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

  • Web Service; Error attempting to read from file

    I'm trying to connect to a web service as outlined by the book "Creating Dynamic Forms with Adobe LiveCycle Designer" which is an excellent book by the way.
    I'm receiving the following error "Error attempting to read from file. http://www.webservicex.net/BibleWebservice.asmx"
    I've successfully created the Data Connection to
    http://www.webservicex.net/BibleWebservice.asmx?wsdl
    I dragged and dropped the bookTitle, chapter & Versie onto the form. I also dragged and dropped the GetBibleWordsByChapterAndVerseResult and the GetBibleWordsByChapterAndVerseBtn.
    I Preview PDF and click the button I get the above error.
    Does anyone have experience using Web Services with Adobe LiveCycle ES and have advice on how to resolve this. Any Suggestions would be greatly appreciated.
    -Todd

    Well, I have more news on the error I'm getting. - NO I didn't find the problem. Yet
    I checked and made sure that web.config had "None" selected " in authentication mode. I.E. <authentication mode="None" /> This should eliminate any authentication problems since that turns off IIS's authentication checking.
    At first I was thinking the form was generating the error trying to read the result coming back from the web service, but I put in some code that writes the result to a log file when the method fires off.
    I noticed that when I clicked on the button on the form, the error message would pop up from Acrobat, but when I check the log file, there was NO entry. This means that Acrobat failed before it could execute the method.
    Here is the web method:
    [WebMethod(CacheDuration = 30,
    Description="Returns the String 'True' or 'False' whether or
    not you entered a 'T' or 't'.")]
    public string TF(string Tf)
    string result="False";
    if(Tf.Substring(0,1).ToLower()=="t"){
    result= "True";}
    LogFile.Write("Sent: "+result);
    return result;

  • Unable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Plea

    nable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Please!

    Hi skydivingsnowman,
    I'm sorry you're having such trouble using the ExportPDF service. What browser are you using?
    Please try clearing your browser cache, or using a different browser (here's a list of supported browsers:   http://www.adobe.com/acom/systemreqs/.
    Please let me know if that works.
    Best,
    Sara

  • When downloading updates for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed.

    When downloading updated for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed. If I don't get that message I get a message saying that the download was unsuccesful and that in order to download I need to go to tools and then select dowload only. Please help I really want to update my iphone!

    Thanks for helping out, but I already tried these steps.
    I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
    Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
    So, it turns out that a broken battery can cause this behaviour.
    But thanks again

  • BODS 3.2: Error opening ABAP file while trying to read ECC table

    I have an ABAP data flow where I'm trying to read an ECC table (I'm following the DS 3.2 tutorial on "Extracting SAP Application Data").  I have the ECC datastore store set up with the following:
    ABAP execution option = Generate and Execute
    Data transfer method = Shared directory
    Working directory on SAP server =
    A\interfaces\D11\110 (SAP app server)
    Application path to the shared directory =
    A\interfaces\D11\110 (SAP app server)
    Generated ABAP directory =
    B\opt\ds\ds32dev1\transfer_ABAP (DS server)
    However, when I run the job I get the following error:
    R3C-150301     12/2/2011 1:54:41 PM     Error opening file <//B/opt/ds/ds32dev1/transfer_ABAP/zcustdim.aba>.
    I have verified the DS userid has read/write access to the Generated ABAP directory.  Any ideas on what I'm doing wrong?
    Thanks...

    Hi Brad, Sorry Tushar,
    I see the discussion has moved on (to the second page ) Still the below should apply. Please give a look and see if it explains things.
    It looks like a permission issue creating the file if I'm not wrong.
    http://wiki.sdn.sap.com/wiki/display/EIM/How+to+execute+the+ABAP
    point 3.
    It will be the abap script that will write the file into the folder you added in the DataStore.
    You can even goto the folder the abap code is in and search for the path in there.
    Here a good  example for windows from the wiki
    http://wiki.sdn.sap.com/wiki/display/EIM/shared_directory+transport+method
    with this important sentence:
    However it has to be made certain that the OS user running the ABAP has the
    permission to write there, and the user running the job requires read
    permissions one the directory and the created file. What OS user is writing the
    file? It is the user running the entire SAP instance. And who is reading the
    file? The user running the DI service
    So:
    The working directory = where the SAP user = the user that is running the SAP installation is instructed to write the .dat file. The folder is probably local to the SAP installation?
    Shared folder is for the JobServer to pick up that file. Same physical directory ...but this time from the DS user prospective. Is the JobServer on the same machine or does the folder have to be mapped?
    Keep in mind that for a job server on Windows, Windows shares with \\<server>\path are OK, but I don't believe there is any other network drive mechanism, so no NFS paths in the <server>:/ or trying // etc.
    Regards
    Norbert
    P.S. In production you should then switch to "execute" instead of load and execute and an ftp server instead of shared folders.

  • Crashes and read-only file systems

    Notice: I apolgize for the long post, I've tried to be as thorough as possible.  I have searched everywhere for possible solutions, but things I've found end up being temporary workarounds or don't apply to my situation.  Any help, even as simple as, "have you checked out XYZ log, it's hidden here", would be greatly appreciated.  Thanks
    I'm not sure what exactly caused the issues below, but they did start to happen within a day of running pacman -Syu.  I hadn't run that since I first installed Arch on December 2nd of this year.
    Setup:
    Thinkpad 2436CTO
    UEFI/GPT
    SSD drive
    Partitions: UEFISYS, Boot, LVM
    The LVM is encrypted and is broken up as: /root, /var, /usr, /tmp, /home
    All LVM file systems are EXT4 (used to have /var and /tmp as ReiserFS)
    The first sign that something was wrong was gnome freezing.  Gnome would then crash and I'd get booted back to the shell with all filesystems mounted as read-only.  I started having the same issues as this OP:
    https://bbs.archlinux.org/viewtopic.php?id=150704
    At the time, I had /var and /tmp as ReiserFS, and would also get reiserfs_read_locked_inode errors.
    When shutting down (even during non-crashed sessions) I would notice this during shutdown:
    Failed unmounting /var
    Failed unmounting /usr
    Followed by a ton of these:
    device-mapper: remove ioctl on <my LVM group> failed: Device or resource busy
    Nother of these errors had ever appeared before.
    After hours of looking for solutions (and not finding any that worked) I was convinced (without any proof) that my Reiser file systems were corrupt and so I reformatted my entire SSD and started anew - not the Arch way, I know   I set all logical volumes as EXT4.
    After started anew, I noticed
    device-mapper: remove ioctl on LVM_SysGroup failed: Device or resource busy
    was still showing up, even with just a stock Arch setup (maybe even when powering off via Arch install ISO, don't remember).  After a lot of searching, I found that most people judged it a harmless error, so I ignored it and continued setting up Arch.
    I set up Gnome and a basic LAMP server, and everything seemed to work for a couple of hours.  Soon after, I got the same old issues back.  The System-journald issue came back and per the workaround on https://bbs.archlinux.org/viewtopic.php?id=150704 and a couple other places, I rotated the journals and stopped journald from saving to storage.  That seemed to stop THOSE errors from at least overwhelming the shell, but I would still get screen freezes, crashes, and read-only file systems.
    I had to force the laptop to power off, since poweroff/reboot/halt commands weren't working (would get errors regarding the filesystems mounted as read-only).
    I utilized all disk checking functions possible.  From running the tests (SMART test included) that came as part of my laptop's BIOS to full blown fsck.  All tests showed the drive was working fine, and Fsck would show everything was either clean, or
    Clearing orphaned inode ## (uid=89, gid=89, mode=0100600, size=###
    Free blocks count wrong (###, counted=###)
    Which I would opt to fix.  Nothing serious, though.
    I could safely boot back into Arch and use the system fine until the system decides to freeze/crash and do the above all over again.
    The sure way of recreating this for me is to run a cron job on a local site I'm developing. After a brief screen freeze (mouse still moveable but everything is otherwise unreponsive) I'll systemctl status mysqld.service and notice that mysqld went down.
    It seems that it's at this point my file systems are mounted as read only, as trying to do virtually anything results in:
    unable to open /var/db/sudo/...: Read-only file system
    After some time, X/Gnome crashes and I get sent back to shell with
    ERROR: file_stream_metrics.cc(37)
    RecordFileError() err = 30 source = 1 record = 0
    Server terminated successfully (0)
    Closing log file.or_delegate.h(30)] sqlite erro1, errno 0: SQL logic error or missing database[1157:1179
    rm: cannot remove '/tmp/serverauth.teuroEBhtl': Read-only file system
    Before all this happened, I was using Arch just fine for a few weeks.  I wiped the drives and started anew, and this still happens with just the minimal number of packages installed.
    I've searched for solutions to each individual problem, but come across a hack that doesn't solve anything (like turning off storing logs for journal), or the solution doesn't apply to my case.
    At this point, I'm so overwhelmed I'm not even sure where exactly to pick up figuring this issue out.
    Thanks in advance for any help

    Did this occur when you booted from the live/install media?
    What is your current set up? That is, partitions, filesystems etc. I take it you have not yet reinstalled X but are in the default CLI following installation?
    If turning off log storage didn't help, reenable it so that you may at least stand a chance of finding something useful.
    What services, if any, are you running? What non-default daemons etc.?
    Does it happen if you keep the machine off line?
    Have you done pacman -Syu since installation and dealt with any *.pacnew files?
    Last edited by cfr (2012-12-26 22:17:57)

  • I cannot update from OS 10.9.4 to 10.9.5. I get a message saying: File couldn't be installed error (513). I have configured my OS so that I have read and write permission followed by system with read and writ permission. Can someone help me? Thanks.

    I cannot update from OS X 10.9.4 t0 10.9.5> Whenever I try I get the following message: File couldn't be installed error (513) and something about not having the proper permission.  Under the Macintosh HD sharing and permissions settings I have customized the settings so that (Me) has read and write permission followed by the system with read and write permission, wheel and everyone have Read permissions.
    I have no problems updating apps such as Adobe CC or iTunes but cannot update the operating system, can someone help me? Thanks.

    1. Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
    Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
    When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, go to Step 2.
    If there's no change after taking this step, continue.
    2. Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    /var/folders
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "folders" selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • [Error] Microsoft SQL Server 2008 Setup. Error reading from file msdbdata.mdf

    Hi all
    I'm trying to install SQL 2008 Express on my Computer: Hp compact DX7300 Slim tower.
    and get this error:
    TITLE: Microsoft SQL Server 2008 Setup
    The following error has occurred:Error reading from file d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template\msdbdata.mdf.  Verify that the file exists and that you can access it.
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0&EvtType=0xF45F6601%25401201%25401
    Log file
    Overall summary:
      Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Exit code (Decimal):           -2068643839
      Exit facility code:            1203
      Exit error code:               1
      Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Start time:                    2014-12-09 23:22:03
      End time:                      2014-12-09 23:40:28
      Requested action:              Install
      Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\sql_engine_core_inst_Cpu32_1.log
      Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0
    Machine Properties:
      Machine name:                  VISTA-PC
      Machine processor count:       2
      OS version:                    Windows Vista
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x86
      Process architecture:          32 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
    Package properties:
      Description:                   SQL Server Database Services 2008
      SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
      ProductName:                   SQL2008
      Type:                          RTM
      Version:                       10
      SPLevel:                       0
      Installation location:         d:\8268cd7b247d294de359c9\x86\setup\
      Installation edition:          EXPRESS
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      False
      AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Disabled
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASDOMAINGROUP:                 <empty>
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
      ENABLERANU:                    True
      ERRORREPORTING:                False
      FEATURES:                      SQLENGINE,REPLICATION
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 *****
      HELP:                          False
      INDICATEPROGRESS:              False
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    SQLExpress
      INSTANCENAME:                  SQLEXPRESS
      ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
      ISSVCPASSWORD:                 *****
      ISSVCSTARTUPTYPE:              Automatic
      MEDIASOURCE:                   d:\8268cd7b247d294de359c9\
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      RSINSTALLMODE:                 FilesOnlyMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 *****
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  <empty>
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           VISTA-PC\VISTA
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  False
      TCPENABLED:                    0
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\SystemConfigurationCheck_Report.htm
    I will very appriciate if someone can help me solve it. I was trying to set Full control for my account in Properties/Security of root folder and try again but error is still.
    Many thanks

    Hi Foreverduy,
    Before you run SQL Server 2008 express setup, make sure that you have installed Windows installer 4.5 and.NET Framework 3.5 SP1 manually. For more information about the process, please refer to the article:
    http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx. Moreover, please turn off all the third-party softwares which could prohibit the installation process.
    According to your error message, the issue could be due to that your account has no rights to install SQL Server, or the corruption on the media.
    Firstly, please ensure that your account has admin rights. Also make sure that you right-click the setup.exe and choose “Run as administrator” to complete the installation.
    Secondly, please check if "msdbdata.mdf" file exists at d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template. If it exists, please make sure that your account has read permission to the extracted
    folder.
    However, if the file doesn't exist in the extraction, the media could be corrupt. Please download the
    media
    again and check if the issue still occurs.
    Regards,
    Michelle Li

  • TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

    Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
    Please!
    Thanks!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Maybe you are looking for