File sharing through email

How do you share a large gallery of edited photos (200+) through email?

Do the Actiontec Routers support File and Printer Sharing? Is there anything that needs to be done, to enable it? Yes, the Actiontec Routers support File and Printer Sharing. No, it does not require enabling. There are no settings on the Actiontec Routers and Gateways with regard to Sharing, it is the router's default behavior. All of the settings for Sharing are on the computers (or printers, or NAS, etc...) themselves. The Actiontec MI424WR and RI408 routers have only one additional feature that can effect File and Printer Sharing (computers that can 'see each other' or a networked printer on the network). As stated earlier, the default behavior of these Actiontec routers allows this activity with no restrictions. Wireless devices have access to each other and to Wired devices, whether Ethernet or USB. The reverse is also true, Wired devices (like a PC) have full access to other Wired devices (like a printer or NAS), as well as Wireless devices (whether PC or printer). Provided that the PCs in question have a functioning Internet connection through the Actiontec Router. Then... If a device can not 'see' the network or access resources on the network, the cause will be on the devices themselves. If it is a printer, then it may be a network TCP/IP setting or missing protocol. If it is a server or workstation that cannot be accessed, then it will be TCP/IP settings, Firewall settings or mis-configured Sharing on the PC. The only setting that can restrict Sharing is Advanced Filtering, in the Firewall Settings section. To repeat it again, the default setting does not restrict ANY internal traffic. However, these routers allow for the creation of VLANs, and Advanced Filtering allows the User to keep the VLANs separate if they wish or to isolate or certain IP addresses. Advanced Filtering allows a great deal of control. If the User has blocked something unintentionally, the rule can be deleted, or the router can be Reset to return it to default values again.
cjacobs001

Similar Messages

Having trouble setting up file sharing through Airport Extreme

Hi, I am trying to set up file sharing on my USB hard drive through the Airport Extreme, on my HP laptop with Windows XP. I went through the steps in manual setup in Airport Utilities, and my hard drive shows up under the Disk Utility in the Airport Utilities, but the problem is that I cannot figure out a way to find the hard drive from Windows XP. Should it show up in My Computer? I've spent a few hours trying to figure it out and I am close to giving up. If anyone can help me solve this problem, I'd really appreciate it!!!

I have this issue, too. Did you find a solution since you first posted?

File sharing through i-tunes not working

I found out reciently that you could transfer files through i-tunes with particular apps. I have tried repeatedly but no file share option appears in app section of i-phone when connected to i-tunes. A friend of mine had the same app as me an is able to use file sharing but he has a mac instead of a pc. Would that make any difference. Any help would be great,
Thanks

File sharing should work on both Windows and Mac, but the app has to be designed to do it. As the same app works on our friend's iPhone all I can think of is that you don't have the same version of the app.

Export log file send through email

Hi,
Basically i send the export log file from the database to my inbox(outlook express). Please let me know how can i send the log from the oracle 9i rel 2 database.
Thanks
Noman Nishat

I didn't get your point. Can you send me the steps of this. I am using windows 2000 Advance Sever. The export parameter are
USERID=username/password@service
FILE=c:\Export_live\live.dmp
ROWS=Y
OWNER=live
INDEXES=Y
LOG=c:\Export_Log\live.log
Now the log file is genrated on (C drive). I need to send this log file to my inbox(outlook express) i.e [email protected]
I hope that time you better understand that what i want ?

N95: file sharing through WLAN

Hi,
On a N95, connected to my local network by wifi. It is working fine as I can go online, but I cannot access the shared files on my computers. Firewalls have been configured on my computers to allow the N95, but I still do not see the shared folders in the N95 file manager.
Any idea?
Thank you

But a network file manager - allowing you to manage files on remote PC's and copy between phone & PC & vice versa...
It depends how much you use it I guess, I use it loads at work, accessing all 3 servers, and any of the 300 workstations - easily getting to files and being able to copy them to my mobile, or any of the other machines on the network, without having to log on - it's great.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Enable AFP File Sharing via ARD through command line?

Anyone know how to enable AFP file sharing on a remote Leopard client using ARD? I had been sending Unix Commands to do most of my changes, but cannot figure out how to enable AFP file sharing through a unix command. I've tried running /usr/sbin/AppleFileServer but that doesn't seem to do the trick. Any ideas?

Howdy, Space Ranger!
I'd recommend checking out the following documentation to get filesharing going without interrupting a current user.
Apple Remote Desktop Administrator’s Guide
http://images.apple.com/remotedesktop/pdf/ARD3_AdminGuide.pdf
Page 145:
Executing a Single UNIX Command
Using the UNIX Command window, you can send a single command to the selected
client computers. The command is executed using the bash shell.
To execute a single UNIX command:
1 Select a computer list in the Remote Desktop window.
2 Select one or more computers in the selected computer list.
3 Choose Manage > Send UNIX Command.
4 Type or paste the command.
If your command is a multi-line script, enter each command on its own line. If you want
to break up a single-line command for better readability, use a backslash (\) to begin a
new line.
5 Set the permissions used to execute the command.
You can choose the currently logged-in user, or choose the name of another user on
the client computers.
6 Click Send.
For information regarding Terminal commands that can be useful (this is for 10.3 and later, but the relevant command does work in 10.8):
Mac OS X Server Command-Line Administration
http://manuals.info.apple.com/en_US/MacOSXSrvr10.3_CommandLineAdminGuide.pdf
Page 65:
Commands you can use to create share points and manage AFP, NFS, Windows (SMB), and FTP services in Mac OS X Server.
Share Points
You can use the sharing tool to list, create, and modify share points.
Best regards,
Allen

File Sharing drops regularly, Time Machine Backups are delayed on OSX 10.7.3. Solution?

Hi there folks,
I'm having an issue with the new 10.7 server. We're running 10.7.3 Server on an Late 2006 XServe with 10GB RAM , connected to a Drobo Pro for Time Machine Backups of our 50+ users via our internal network.
Recently, Time Machine backups have been getting delayed, stating that they can't connect up to the backup drive (which is out Drobo Pro handling 16TB of space). The Drobo Pro hass not unmounted, and all the IP Addresses coming from and going to the Server handling the backups will still ping.
We've also be having trouble with Server resident drives and shared folders that people can mount using the ⌘+K shortcut or "Connect to Server" option in finder. People will choose the IP address, and finder will think for a few minutes then give an error stating that it cannot connect the the specified IP. The only way I can reestablish connection to the file sharing through a remote computer is to remote or physically login to the server, then go into System Preferences and turn "File Sharing" off, then on again. After that, the ⌘+K on a remote machine can find the drives again.
It's driving me crazy why this is ocurring. I don't know why, and people in the office are beginning to complain that they can't access certain files on the servers or are worried because their backups are not completeing.
It should also be known that a majority of the machines we have in the ofice are still running 10.6.8, with only a handful on 10.7, as we haven't had the time to make the major switchover yet.
I'm not the best when it comes to server software or Unix CLI managment (the office outsourced our Network Admin to the east coast), so I'm a bit stumped.
Does anyone have any suggestions to try? Is there a link between the number of Time Machine Users and the connection failures? Should I just tel the NetAdmin to create a script that will restart the File Sharing protocol on the server every couple of hours?
Hopefully someone will be able to help.
Thanks,
JYHASH

I started having connectivity issues to my 10.6.8 server from my 10.7 client immediately after updating the client to 10.7.3. FWIW. Takes forever to connect, when it does. After just milliconds before.

Can I print a pdf file from an email on an HP printer Deskjet 5100?

Can I print a pdf file received through Email on an HP Deskjet 5100 printer and how?

Save the file to your hard drive, open it in Adobe Reader and print. Unless the file has security restrictions against printing, those steps should work.
-David

Problem in opening of word and excell files downloaded from email attachment in MS office professional 2013 paper licence

Hi,
I am facing the problem in opening the word and excel files received through email in my MS office professional 2013 paper licence, Microsoft Windows 8.1 enviornment. please help in this matter
regards
Rajeev Bhagwat
Administrative Officer-I
Purchase and Store Section
UGC-DAE Consortium for Scientific Research,
University Campus, Khandwa Road, Indore (M.P.), India.
Telefax-+917312361546

I should further say the files I sent are .xlsx and .docx files. They look fine my end and I send such files all the time without problems.
However, I did try to cheat by going in via the Safari onto my 'live' online email account and the Safari automatically transfers them to winmail.dat files with the same result.
Ahh - have just been on using my PC this time and you are right, it seems that the service provider does the transfer and then when my outlook opens the file (on the PC), it must reconvert to .xlsx etc again.
Very strange.
Ergo, I guess the question should be how I open wimail.dat files ??

HT201301 After file sharing, if a new iTunes account is added to the device and synced, will the shared files be deleted?

My company would like to give out iPads to contest winners and have company owned "propoganda" loaded onto the iPad for the winners to view. Most likely videos, word documents and possibly more. I have a couple of questions about that.
Without building a file sharing app ourselves what apps are the best for file sharing through iTunes?
If we load files onto a device using our iTunes Account, then hand it over to the winner and they put their iTunes account on the device and sync it, will the files we pre-loaded be erased?
If so, are there any other solutions to accomplish this task?
Thank you for any help you can provide!

Syncing with your computer will delete data from his phone but you should be able to restore his backup.
iOS: How to back up
However, he won't be able to play music purchased under a different iTunes account than the one his phone is signed into. He can change the account to yours, but any apps he purchased under his account will no longer update, and any purchases he makes will go on your account.

Time Capsule and File Sharing on Server

I am in the process of setting up Server at home. I've run into a snag with using a Time Capsule as my router and backup drive and also enabling file sharing through Server. When adding File Sharing as a service in the Server application, a warning comes up to disable disk sharing at the router before forwarding the ports. The problem is that if I disable disk sharing on the Time Capsule, I can no longer access my Time Capsule drive (for obvious reasons). I was reading another post that discussed enabling disk share from the router and then adding a port for file sharing manually, but that did not seem to work as I cannot remotely access my files.
I am running Server on an iMac which is running Mavericks. The Time Capsule says it's "version 7.6.4". It's a 2TB drive. The iMac is a 2012 system with 1TB drive. I also have a Drobo and a few external drives connected.
I appreciate any advice! Thanks!

If I turn on disk sharing (even without the LAN option) I can select the disk to back up, but then I cannot share files using my server due to the port conflict.
I find this hard to follow.. there is no port conflict on a local lan with sharing.. that is not even possible.
If you have several Macs for instance and set each to share.. they are all able to share.. there is no port conflicts.. You do not need all the devices on different ports because they have different names.
You only get into port conflicts when you have external access turned on.. and are having to port forward. Because the network is identified by a single public IP.. in that case you can port translate but you don't do that in a LAN.
There has to be something screwy in the server version of Mavericks for this to happen.
I am trying to think of way around it.. but I will do a bit of google work first on if others are having issues with latest server version.
What about giving me a few screenshots of the setup...
Network on the server.. and network on the TC ..
And run netstat scan on the server to see the local IP addresses of everything.

Can you send FCP project files through email?

If all of a projects original capture footage is copied to another hard drive and then opened with the copied saved project file on another computer, will the "new" copied project work correctly?
Can you send project files back and forth through email if your both working with the same exact copied footage?
powermac g5 2.0 DC; powerbook g4 Mac OS X (10.4.7)

I use iChat to send project files. I've even used it to send a missing media file here and there (overnight, of course). < </div>
iChat is tremendously under-used and misunderstood application. Being able to transfer h-u-g-e files without FTP, connecting to a server, connecting to the target Shared folder or drop box or stooping to the hassles of email is only one fascinating aspect of this cool little tool.
The Macintosh OS is full of such things.
bogiesan

Need to Generate PDF file and send it to customer through email-ALV report

HI All,
I am having data in Internal table.
can we create PDF file with out having spool-request number.
My requirement is whenever user clicks on execute button the output is generated in PDF format automatically and then send it to customer through email.
I found few programs in SDN for generation PDF. But problem is everyone passing the spool request to the function module.
spool request will be generated whenever we click on print button.
Am I correct?.
Is there any other way to create spool request automatically. If so we can pass the this spool number to the function module.
Regards,
vinod.

hi
For sending a mail, this code will help you.
Pls reward if help.
FORM send_mail_2 USING msgid msgno msgv1.
mailuser oder Gruppe like sy-uname default 'Ruckerk'.
DATA: express_hold_time LIKE sovaltime.
DATA: text LIKE sotxtinfo.
DATA: receiver LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
MESSAGE ZF100 (FTP an UDB fehlgeschlagen)
text-msgid = msgid.
text-msgno = msgno.
text-msgv1 = msgv1.
text-msgv2 = ' '.
text-msgv3 = ' '.
text-msgv4 = ' '.
express_hold_time
express_hold_time-days = 01.
express_hold_time-h_min_sec = 240000.
receiver
receiver-receiver = mreceivr.
Gruppe von Empfängern
receiver-rec_type = 'C'.
und Expressmeldung ausgeben
receiver-express = 'X'.
APPEND receiver.
CALL FUNCTION 'MESSAGE_SEND_AS_MAIL'
EXPORTING
msgid = text-msgid
msgno = text-msgno
msgv1 = text-msgv1
msgv2 = text-msgv2
msgv3 = text-msgv3
TABLES
receivers = receiver.
IF sy-subrc <> 0.
WRITE:/ 'hat nicht geklappt', 'SY-SUBRC =', sy-subrc.
ENDIF.
PERFORM print_error_report.
Fehlermeldung zum Abbrechen des Report's ausgeben.
MESSAGE e398 WITH 'Jobabbruch' msgv1.
ENDFORM. " SEND_MAIL_2
Another Program:
*& Report ZSENDEMAIL *
*& Example of sending external email via SAPCONNECT *
REPORT zsendemail .
PARAMETERS: psubject(40) type c default 'Hello',
p_email(40) type c default '[email protected]' .
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form POPULATE_MESSAGE_TABLE
Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform. " POPULATE_MESSAGE_TABLE
*& Form SEND_EMAIL_MESSAGE
Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform. " SEND_EMAIL_MESSAGE
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to do with the use of my Wacom3 Tablet...I've been having trouble with it and was getting the same message when trying to open the User's Manual in my Applications/WacomTablet file on my hard drive. Any suggestions? I just downloaded the latest version for the Wacom and recently upgraded to Snow Leopard 10.6.7 (which I hate, and my CS3 hates, etc.)

It sounds like you have a a password-protected PDF. The password was set by the person who encoded it.

How to send pdf files from local dir through emails attachments

I have some pdf documents in some directory, I want to send those pdf's as an attachment throu emails to the concerned person.
Please let me know how to attach the files and send through email.
Thanks.

You are using Forms 4.5, which is a client/server configuration. When you create a pdf file, the file has to be written to a directory that is accessible from your PC. D:\ is acessible, /tmp/ not (that is a directory on some Unix server). If you want to write files to a Unix server, you have to set up Samba and map a drive from your PC to he Unix directory.
Since you are creating multiple pdf files, you will have to wait until all reports are finished and mail them afterwards. You can create a batch script to mail the files.

File sharing through email

Similar Messages

Maybe you are looking for