File Sharing with MacPro, G3 B/W and Powerbook G4

I am attempting to network 3 computers. I am using wired router. I have all IP addresses set. Here is the problem. If I want to connect as registered user, I have to use a password. I know my password, but it is being rejected. I reset the password using the Start Up CD, got confirmation of the change, and still, my password is rejected. I need a way of resetting my password.
I can connect as GUEST to and from all computers, but not the way I would like. All folders in all computers are set for sharing... but, I can connect FROM G4 to MacPro, only as GUEST and I get all drives, including an attached external drive. From MacPro to G4, only as GUEST, and I can only get DropBox. From MacPro to G3 only as GUEST and only DropBox. From G3 to G4 as registered user (password works) and I get all drives. From G4 to G3 as registered user (password works) and I get all drives.
I have the same password on all 3 machines. I did not attempt a password reset on G3 or G4 because they work with password. I reset password on MacPro only, and got confirmation of change... but still will not work.
I hope that was not too confusing.
So, do I need to attempt a password reset on the MacPro again or is there something else to attempt???

When connecting TO Mac OS X, you are connecting to a specific account, not to the Computer per se.
When starting from OS 9, the computer where you are typing always tries to be helpful and suggests a name from the names IT knows. It actually has NO IDEA, and you should replace the name it suggests with the account-name you know on the remote Mac OS X computer. The number of bullets shown for the password is a standard number and implies NOTHING about the password length.
If this connect-to account has Mac OS X Admin rights, you get to see everything on the Mac OS X computer because that is what an Admin would be able to see if logged on directly.

Similar Messages

File sharing with iMAC and OS 9.1 Power PC back-to-back not working

Here's the setup. Any ideas on why it's not working?
Internet ports connected with crossover cable.
OS 9.1: File sharing ON, Program linking OFF, Document file selected for sharing
OS 10.4.8: Personal file sharing ON, Built in Ethernet both computers, GO connect to server-Power PC IP address entered.
Response after a timeout: "Connection failed. Check server name or IP address".
17 iMAC Intel core duo Mac OS X (10.4.8)

Still not working. Here’s what I tried.
OS 9.1: Configured TCP/IP in Control Panel for connection via Ethernet slot. Noted IP address from last DHCP connection. Turned on File Sharing in Control Panel. Selected file for sharing. In Chooser clicked Appleshare icon and Server IP Address button. (Note: Appletalk button active). Entered iMAC IP address in Server Address screen and clicked Connect.
No connection made.
Then opened Appletalk in Control Panel and noted it is connected via same Ethernet slot as TCP/IP. Therefore returned to Chooser, clicked Appleshare icon and clicked Appletalk inactive button. Upon turning File Sharing on in Control Panel, get warning message, “Appletalk must be turned on to use file sharing.”
As before, iMAC connect to OS 9.1 didn’t work either.
Artnum=302784 indicates Appletalk cannot be used, TCP/IP must. Apparently there is no way to disable Appletalk in OS 9.1 maching when file sharing.
It appears I’ve hit a dead end in trying to get operational file sharing between OS 10.8.4 and OS 9.1 machines.
Thanks for your help, BDAqua
17 iMAC Intel core duo Mac OS X (10.4.8)

Back to My Mac/VNC/Screen and File Sharing with a PC

Ok back to my mac is great but it doesn't work with a pc. What is the best alternative to screen and file sharing with a PC???
Thanks,

Use VNC.
On the PC.
http://www.realvnc.com/products/free/4.1/index.html
On the PocketPC
http://www.windowsfordevices.com/news/NS5673359231.html
Apple's Remote Desktop allows for VNC control through a password.
iFelix

Macs and file sharing with Panasonic Lumix TS5

I'm trying to set up this camera to send my photos wirelessly to my IMAC but have hit a brick wall. The instructions with the camera state wifi sharing is supported with OS X 10.4 to 10.8, and I am running 10.75. The instructions are simple: find the file and enable sharing. I've completed all the steps, and my camera finds my Imac fine, but then cannot find the shared folder.
I researched this and found that for a different Panasonic camera, despite what panasonic says, file sharing did not work for mac only environments. (http://www.dpreview.com/forums/thread/3360154). I have contacted panasonic, and am beginning to believe the this is true for my camera as well. I explained my problem and she first recommended to sign up for a lumix account. Then it went from here:
Kerry-Ann W.: In the setup it states where a lumix club account is required to send images to lumix club cloud
Dave: Ok, do I understand correctly that I needed a lumix club account to transfer images wirelessly to my IMAC?
Kerry-Ann W.: No I am not saying that. There is some sharing settings that needs to be set on your computer. We recommend that you contact apple so they can assist you in adjusting those settings.
Dave: Ok, I've signed up for a lumix club account. Will that help me transfer my images to the mac?
Kerry-Ann W.: We recommend that you contact apple so they can assist you in adjusting the sharing settings on your IMAC.
Dave: Kerry-Ann, please help me. I've done exactly what the Lumix manual tells me to do with my mac and it's not working. You are supposed to help when the manual doesn't suffice. Isn't there any tips you can give me to try and make this work?
Kerry-Ann W.: That is correct and based on checks done if it is not seeing your folders that means there needs to be some settings done on your computer for it to see the folders and if that is not done then you will not be able to see the folders.
Dave: Ok, so will you help me get those settings done on my computer?
Kerry-Ann W.: We recommend that you contact apple so they can assist you in adjusting those settings.
I have no idea what settings she is referring to, and she offered no guidance at all. Has anyone had any success file sharing with panasonic cameras? Or has anyone else concluded this is hopeless?
Thank you,
Dave

I have run through 2 of these cameras (1st one died-Epic Panasonic Fail) and I'm stoked I found the easy fix. No thanks to PaniCsonic.
Connect your camera via USB to your MacBook. Don't worry that it won't show.
Go to System Preferences under the 'Apple' icon (top left corner for any newbies)
Select the 'Sharing' tab/folder (should be yellow diamond with a person walking to YOUR left direction)
Select 'Internet Sharing'
A sub menu 'To computers using' will open up to the right with 3 boxes/options:
1) Firewire
2) Ethernet
3) Bluetooth PAN
Select Bluetooth PAN box so it check marks as selected.
Click the 'Internet Sharing' box.
Select 'Start' when the prompt asks if you are sure you want to turn on Internet sharing.
The 'Internet Sharing' box will then select.
Your camera will then prompt you to select a USB mode. Select 'PC'.
Wait through the access mode and VOILA, your photos will be uploaded straight to iPhoto as they should do in the first place.
I like the camera for it's simplistic functionality. I had a slick Olympus underwater that had the same features, but was more time in navigating through them all. I don't like PaniCsonic for their poor foresight in making this camera an austosetup feature for Mac users. My iPhone didn't like it much either.
Nonethless, there's the fix. For/from me.

HT204387 can we get apple to make a fix to download that would enable the bluetooth file sharing with any deivce?

can we get apple to make a fix to download that would enable the bluetooth file sharing with any deivce? i would like to to stay with Apple iphone but if they dont improve the lack of features.. i will move on and I know im not the only person to think like this.
regards
gavin_p

There is not "fix" to be provided, Apple made a decision to not include the file sharing profile.
You are welcome to provide feedback, but after six years, I would not hold your breath.
Feedback can be left here: http://www.apple.com/feedback/iphone.html

File sharing with multiple users on one Mac

I have two Macs, both of which ca seen each other across the network. My question regards file sharing with multiple users on the same computer. When file sharing, are the files from all users available across the network, or just those of the user presently logged in? The issue is that I am trying to access files from a user who isn't currently logged in, but another user on that computer is. I need to get into that person's documents, but I don't see a way to navigate to their documents folder.

Right, I got that. But the computer is in constant use by User A, while I need access to User B's files. I could need access at anytime, and it would be a pain to make User A log off and log in as User B everytime. I was just wondering if there is anyway to access User B's files in this situation, without logging User B in.

File sharing with PC

Hi,
I'm new to the Mac experience and I'm trying to set-up file sharing with my MacBook and PC and I can't figure it out. I've tried entering the PC's IP address through the Finder - Connect to Server, but I can't get it working.
I would appreciate any suggestions you have to offer! Thanks.

Click here for information, using a Tiger article if needed.
(31792)

File sharing with accounts

I currently have my TC configured for file sharing with a disk password. Lately, however, I find that I have a need to be able to restrict read/write access to certain folders and files based on the user. But, when I select File Sharing "With Accounts" from the drop down I get a warning message stating "Setting up user accounts will make any files already on AirPort disks inaccessible." Seems like a pretty vague warning considering the possible outcome!
Does this mean I will lose access to all existing files already on the TC disk permanently, or just until I configure the accounts with access?
Thanks for any insight.
- Don

Is the file sharing the same between the TC and the AirPort Extreme 802.11n (Gigabit Ethernet) with a USB2 connected disk?
My experience is that the network share of the shared disk is different, but no files get lost. One can move between the security mechanisms without losing data. YMMV.
Here are my findings in detail: I was using the shared disk "With a Disk Password". When connecting from a Mac, a single share called like the partition of the disk would automatically mount. On that disk I put some folders "Music" and "Videos" directly in the root of the mounted share. The same volume also had a backup copy of my Mac mini, that I did when it was still locally connected (USB2 directly to the mini) rather than via Disk sharing. From that time there is still a "Users" folders there. One important folder is called "Shared". All folders and their files are accessible.
"Volumename" (share)
- Music
- Photos
- Videos
- Shared
- Users
When I changed from "With a disk password" to "With accounts", I also get the warning about "...will make any files already on AirPort disks inaccessible".
After the change, I have no access to "Music", "Photos" or "Videos" anymore.
However, there is still the share called "Volumename", but now it points to the sub folder "Shared" !!!!
When connecting from either Windows or Mac I see two shares. One called "Volumename" and the other matching the user name. I think the user share actually points to /users/username.
When switching back to "With a disk password", all is like it was before - no files are lost, the "Music", "Photos" and "Videos" folders stay there, and so does all their content.
I will now try to move them into the "Shared" folder, so that the share content after switching to Secure Shared Disk "With Accounts" will look the same as the content looked until now.
Comments?

File sharing with 3 computers, working partially but not entirely

I have three computers on my network and file sharing works only partially. Here's my problem:
Computer 1 can connect to Computer 2 and 3
And, vice versa, Computers 2 and 3 can connect to Computer 1
So file sharing is obviously working, to a certain extent, on all three.
BUT ... I cannot get file sharing to cooperate between Computers 2 and 3. i.e. I browse for networks on 2 or 3, and the only thing that appears is Computer 1.
Computer 1 (the cooperative one) is an iMac 10.5.8. The other two (naughty) ones are Mac Pros, on Mountain Lion.
Thoughts anyone?

I have a similar setup. One iMac with 10.5.8 and 2 Mac Pros running Mavericks.
Networking the three of them with OS X has not been problematic in my case. I can't imagine why the 2 Mac Pros won't see one another.
Have you tried adding 'shared folders' in the System Preferences/Sharing/File Sharing for both Mac Pros?
You could also try to 'force' a connection with Finder's 'Connect to Server' (Command-K). Just enter AFP:\\your_mac's_IP_address.
I've even managed to get all three macs to network with Windows and Linux (though it's not as smooth as connecting to other Macs, obviously).
Best of luck.

Vista file sharing with OS 10.3.4

Are there known issues with Windows Vista OS connecting and file sharing with Mac OS 10.3.4? We can connect Windows XP with Mac OS 10.3.4, but two Vista machines cannot. Any ideas?

Maybe a lack of support for something the Vista OS uses.
Mac OS 10.3.9 was always mountable and writable from XP. I would set up a folder on a large disk on my MDD (10.3.9) for my wife to connect to with her work laptop running XP, to use as a backup area. Printing was also extremely easy from XP to a USB printer attached to 10.3.9.

FCE file sharing with FCP...?

I am considering purchasing FCE (and a macbook pro), but need to know a few things from users who have experience with it. First, is FCE totally compatible in terms of file sharing with FCP? I'm a beginer and need to learn editing. I just completed production on a film. My editor, who is also my filmmaking partner has FCP with all the bells and whistles. I live in California, he lives in Georgia. I'm hoping to supplement the editing process as we begin putting the film together from opposite sides of the country. Will I be able to do so with FCE, or will there be a problem opening certain filters and plugins from FCP?
Also I was wondering, if I do purchase FCE will I get an upgrade price break when and if I move up to FCP?
Any help and advice would be mucho appreciated. Thanks

Hi
Exactly as Tom writes.
But there are some tools in FCP that are that great that they could justify for
taking the full step.
Colorcorrecting - three ways (not to mention the extra program Color™)
MultiCamera editing - This to be able to edit as real life all Cameras at once
and You even don't need to be anything like precise - only adjust a second or two
afterwards.
A two Camera one hour documentation used to take about 10 to edit in FCE FOR ME
and I've done same in FCP in about 1 hour 20 minutes.
It was mind blowing.
But there is a price-tag I know it hurts and an upgrade program would benefit
the Apple brand (as they usually does)
Yours Bengt W

Osx 10.5.8 can not file sharing with Canon IR 5020i copier/printer/scanner

this mac networked other window computers(vista), the canon ir 5020i is file sharing(scanning and save the documents) with vistas.
All computers are same "Work Group" and this mac can print out to the canon ir 5020i.
i can see(open and delete) the files of the mac from vista computers.
how can i get a file sharing with this mac?
Thanks in advance.

Try the Leopard forums. These are for Snow Leopard.

Can I use apple sharing with my windows 7 pc and apple tv?

Would like to go to atv select computrt so I can access my photos and home video from my windows pc to my atv

Can I use apple sharing with my windows 7 pc and apple tv?
Yes.
Sorry, I don't understand the rest of the question.

File Sharing with 2 iBooks

Is it possible to connect 2 iBooks via Airport Extreme for simultaneous file sharing - not necessarily the same file.
Thanks
Charles
iBook G4 Mac OS X (10.4)

Thanks. I am listed as an administrator on both machines. I can lock and unlock. I can check the box for personal file sharing. I can then lock it all.
For some unknown reason it seems to take a while for personal file sharing to start up. When and if it does it will turn itself off if one subsequently tries to connect the 2 machines. Strange.
I know this is a strange situation.
Charles

How do i use file sharing with my microsoft pc and mac book?

I have a windows vista pc that my daughter uses and I have a macbook pro and we want to use file sharing for our itunes libararys. We connect to internet with my time capsule. I have both computers itunes file sharing turned on but I can't seem to be able to see them on the network. can someone give me some pointers on how to make this work. thanks

The best way I know is to sign up for iTunes Match. All your music is stored in the cloud and can be accessed by up to 10 devices.

File Sharing with MacPro, G3 B/W and Powerbook G4

Similar Messages

Maybe you are looking for