File should not be processed until completely written

Hi Experts,
My scenario is proxy->file(xml). The file will be huge.
Once the file is kept on the target location, some crons will pick this file for processing.
How can I make sure that the file should not be picked by crons until the file is completely written on the target location by PI file receiver adapter?
Your inputs will be highly appreciated.
Thanks and regards, Prasad

Hi Satish,
Thanks a lot for yout reply. I have another question on the same.
When XI creates temporary file, where will this temporary file be created?
And please correct me if my understanding is correct on below.
If we select 'Use temporary file', then XI first creates this temporary file, writes all the data to it and then moves the whole file to the target location. And if we select 'directly' then XI first creates the file on target location and then it starts writing the content to the file. Is this understanding correct?
Thanks a lot.
Regards,
Prasad

Similar Messages

HELP - Receiving error message "The file has not been processed. An error has occurred which stopped the processing of the PDF"

Have been using Adobe CreatePDF for many months successfully.
Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
Tom.

I am still experiencing this problem. Customer service from Adobe has been abysmal!
I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
Note: This problem is happening always now, regardless of time being used.
Tom

I downloaded audiobook from iTunes. It comes in 2 parts. Part one will not play, only part 2. When I tried to sync to ipod or iphone it prompted,"file could not be reaf from or written to".Can I fix this issue?

I just purchased and downloaded an audiobook from iTunes. I tried to sync it to iPhone 4 and iPod Classic but with both devices got a message"file could not be read from to written to". Then I tried to play the audiobook in iTunes and realized that only part 2 of my 2 part download will play. Part 1 will not play. Is this why I got the message? Is there any way to get another try at downloading my audiobook I just paid $15 for??

Click the Shuffle button at bottom left of iTunes window so the crossed arrows are not blue.

Error - Server file should not be empty- while uploading Text files in RAR

Hi,
We are uploading SU24 text files but we are getting the error "Server file should not be empty" while uploading the Description files in RAR 5.3
We followed the same naming covention and also used UTF-8 format for the text files. We placed the file in our Desktop as well and tried uploading into RAR - but still the same error is being thrown?
Are we missing something here?
Thanks and Best Regards,
Srihari.K

Hi and thanks to the answers so far.
I forgot to mention some points :
- I'm using forground import
- we are trying to use RAR to run risk analysis on non-sap systems as well as SAP (single or cross-systems).
So the file I'm trying to upload does not come from a SAP backen, but was created from scratch.
However the data in the files are coherent (and I compared with a SAP extraction, the format is the same)
here is a sample of the file I try to upload : (an that is actually what I'm trying to import as a test file)
sap_auth.txt:
OEITIAC     GTIAC     SEL     1
OEITIAC     GTIAC     MOD     1
OEITIAC     GTIAC     INS     1
OEITIAC     GTIAC     SUP     1
each element (ACT/PRM/FLD/VAL) is defined in the sap_desc.txt file that I loaded first (without error).
note that each column is separated by a single TAB (with an empty column at the end of each line).
each line is terminated by a CR/LF
I tried UTF-8 with and W/O BOM
Regards,

Canon .CTG files should not display in Photo Downloader

Please make an option in Photo Downloader to exclude certain file types such at
b Canon .CTG
files which should not be downloaded. I would like a preference to exclude file types from being downloaded. Thank you.

Toe,
Make sure Adobe hears you. You're not addressing Adobe here. Either file a bug report form or post in the New Features Requests section.

"Original file could not be found" (until re-launch)...?

Howdy,
I run the most recent iTunes, and the most recent version of iPhone software under XP Pro, SP3.
After I sync the phone, iTunes displays my music with bangs (exclamation points) next to perhaps 10% of the tunes. (If, I click "sync" and then immediately click on Music, I can see the bangs appear, all at once...)
If I attempt to play one of those tunes, I get an error telling me that the tune could not be played because "the original file could not be found."
But, if, at that point, I simply close iTunes, and then re-launch it, all the bangs are gone, and all the tunes can be played.
What might be causing this, and what can I do about it?
Sincere thanks,
Kenneth

thankyou chris
and it worked -but it wont work on my external HD i had to move the music folder back to my computer and
i still have the odd one that i have to self link.
"why ask?
Perhaps you want to remove it from your library"
also if i wanted to remove it from my library i would delete it, not click on it like i was going to play it..no?
Thanx for the help

What files should not be checked into Source Control?

Good afternoon.
Running RoboHelp 11, integrated with Team Foundation Server and Visual Studio 2010.
When my two colleagues recently "got" the latest project files from Source Control, they also got items that had been removed or deleted. For example, I had removed all conditional build tags from my project, but their version still included the build tags. Eventually, thanks in part to an old post from Peter Grainge, we realized that the PSS in Source Control contained a lot of that old information. We deleted the PSS and stopped checking it into Source Control. Problem solved. No more conditional build tags or unwanted Single Source Layouts, etc. (I think the PSS got checked in by our Release Engineer when he was trying to solve some other problem. Two years ago it was not being checked in.)
I vaguely remember reading something somewhere once upon a time about not checking certain RoboHelp project management files into Source Control. So far I've not found any such information in the RoboHelp Help or online.
Does anyone know where I can find a list of RoboHelp HTML project management files, such as the PSS file, that should never be checked into Source Control?
Many thanks.
Carol Levine

Look in Snippets on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

"updating ipod failed..files could not be read from or written to+

help!! this is the message that appears everytime we try to add a song to the ipodshuffle on itunes.
we have updated itunes, the ipods and windows and nothing is working.
we even restored the ipod to factory settings and it still wont work properly!!!this message appears everytime we drag a song to the ipod
this is happening with both ipods shuffles that we have but not with the ipod nano
could someone please help with this problem PLEASE

Hi.
The scenario will be - "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod..
In this case we need to try all the steps mentioned in the Apple article number - 301267..
The link is http://docs.info.apple.com/article.html?artnum=301267..
I will list out thr steps for convenience...
1. Plug the iPod directly to the USB removing all other devices connected..
2. Open "My computer" -> Right click on removable drive meant for IPod and select format 32..
3. Then Restore the IPod back to factory settings..
4. Then unp[lug the IPOd, Reset it and then try transferring songs onto iPod
Please revert back on clarifications..

I need the detail about how to read the data from spreadsheet file. but the file should not created by labview.

i face some difficulties here. the datas are encrypted...... how to get correct data ..........

Excel files are in a propriertary microsoft format. A LabVIEW "spreadsheet" file is a file containing an ASCII table with tabs separating columns and linefeeds separating rows. They are not ther same!
If you use "write to spreadsheet file" and name the file *.xls, this does NOT make it an excel file, it just tells the operating system to open it with excel if you double-click it. Excel is smart enough to notice that it is not really an excel file and does its best to convert it transparently. The same does not work in reverse.
You have several options:
You can use excel to export your data to something LabVIEW can read. Try e.g. tab delimited text.
You can use e.g. activeX to read an excel file, see: http://zone.ni.com/devzone/cda/epd/p/id/3409
Search for excel in your example finder for more possibilites.
LabVIEW Champion . Do more with less code and in less time .

.csv file should not get insert sql query with report

Hi Guys,
the below sqlplus code giving both sql query and records report in csv format file. I want only records csv file report.
SET LINESIZE 1000 TRIMSPOOL ON PAGESIZE 0 FEEDBACK OFF
SPOOL c:\oracle\extract\emp.csv
SELECT empno || ',' || ename || ',' || job || ',' || mgr || ',' || TO_CHAR(hiredate,'DD-MON-YYYY') AS hiredate || ',' || sal || ',' || comm || ',' || deptno
FROM   emp ORDER BY ename;
SPOOL OFF
SET PAGESIZE 14
can any one suggest me on this.
Thanks in advance!
Regards,
KLR

You will have to use UNION ALL:
SQL> SET LINESIZE 1000 TRIMSPOOL ON PAGESIZE 0 FEEDBACK OFF
SQL> WITH t AS (
2              SELECT 'empno,ename,job,mgr,hiredate,sal,comm,deptno' str,
3                      null ename
4                FROM dual
5             UNION ALL
6               SELECT empno || ',' || ename || ',' || job || ',' || mgr || ',' || TO_CHAR(hiredate,'DD-MON-YYYY') || ',' || sal || ',' || comm || ',' || deptno str,
7                       ename
8                 FROM emp
9            )
10 SELECT str
11    FROM t
12    ORDER BY ename NULLS FIRST;
empno,ename,job,mgr,hiredate,sal,comm,deptno
7876,ADAMS,CLERK,7788,23-MAY-1987,1100,,20
7499,ALLEN,SALESMAN,7698,20-FEB-1981,1600,300,30
7698,BLAKE,MANAGER,7839,01-MAY-1981,2850,,30
7782,CLARK,MANAGER,7839,09-JUN-1981,2450,,10
7902,FORD,ANALYST,7566,03-DEC-1981,3000,,20
7900,JAMES,CLERK,7698,03-DEC-1981,950,,30
7566,JONES,MANAGER,7839,02-APR-1981,2975,,20
7839,KING,PRESIDENT,,17-NOV-1981,5000,,10
7654,MARTIN,SALESMAN,7698,28-SEP-1981,1250,1400,30
7934,MILLER,CLERK,7782,23-JAN-1982,1300,,10
7788,SCOTT,ANALYST,7566,19-APR-1987,3000,,20
7369,SMITH,CLERK,7902,17-DEC-1980,800,,20
7844,TURNER,SALESMAN,7698,08-SEP-1981,1500,0,30
7521,WARD,SALESMAN,7698,22-FEB-1981,1250,500,30
SQL>
SY.

GL Account Should not be used

Dear Friends,
For PO-4111127913, GL account 726234 was used in the PO - item details, invoice tab.
The user now says that the GL Account should not be used untill 2010.
What is the most simple way of blocking the GL? If any user tried to select the GL in the PO, he must not able to use it or the system should issue a warning or error message " you cannot use this GL Account".
Already Some POs with this GL Account 726234 has been posted. IR and FI Documents were posted. How to reverse everything from po,IR and FI Documents.
Please suggest?
Regards
Sridhar
Edited by: Sridhar M on Dec 8, 2009 1:24 AM
Edited by: Sridhar M on Dec 8, 2009 1:25 AM

Hi,
Blocking an account is usually done for closing and reconciliation purposes so that no further activity can be posted to that account. The account can be unblocked when activity can resume.
Menu Path
From the SAP R/3 screen, select the path:
Accounting >> Financial accounting >> General ledger >>
(new menu) Master records >> G/L Accounts >> Individual Processing >> Centrally
Fast Path
At the Command Line, enter:
/NFS00
Block G/L Acct: Request Screen
Key Fields (Complete or Review)
Account number
Enter the G/L account number to be blocked / unblocked.
(F4) to access a matchcode.
Company code
Enter CUR for MIT.
Next Step...
(ENTER) to access the Block G/L Account Screen.
Block G/L Account Screen
Use this screen to block / unblock the account for different postings.
Key Fields (Complete or Review)
Posting block
All company codes
To block the account from being posted to CUR, the MIT company code, click in the box beside this field.
Planning block
All company codes
To block the account from planning, click in the box beside this field. Note: To unblock the account, click in the box to deselect.
Next Step...
(F11) to save the blocking / unblocking changes made to the G/L account. The Block G/L Acct: Request Screen reappears with a message that the changes were made.
Thanks,
Rajesh.

Since changing our computer I have been unable to download ebooks to my Reader Library I get a message Some file types associated with EPUB files are not associated with Reader Library; Waterstones suggest that I may have accidentally created a new Adobe

When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?

Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others.

Messages not being processed

Hi,
I experience an issue with 10g soa, about not having processed some messages sent to receive activities of my process.
I have my process deployed, I can initiate the instance of the process, I can move the flow of the process by calling some receive activities, but sometimes it seems it stucks on one of these receives. It happens randomly on various processes on various receive activities, like one day one receive operation doesn't proceed at all, and on another day it is another receive operation, and that is without any change to the process and redeployment.
I can see the message has been received by server, because I can query it from DLV_MESSAGE table from BPEL data source, and i see its STATE = 0, which is unprocessed. I am also sure that message has valid content and the correlation bits on the message are also correct, really there is no reason why such message should not be processed, it always worked until the moment it decides not to for unknown reason.
My question:
1. What causes messages to be not processed?
2. What are known options to deal with this situation?
Currently I am in a condition where I can spot unprocessed messages, which is fine, so I am aware of the problem, but I am not able to deal with the problem. Even if I tried to submit the message via BPEL Console, it was not processed either.
Thank you for any suggestions

Some blog information to support this case
http://soacrux.blogspot.com/2010/08/automatic-recovery-program-for-pending.html
Content repaste:
Automatic recovery program for pending BPEL call back messages
BPEL engine maintains all async call back messages into database table called dlv_message. You can see such all messages in BPEL console call-back manual recovery area.The query being used by bpel console is joined on dlv_message and work_item tables.This query simply picks up all call back messages which are undelivered and have not been modified with in certain threshold time.
Call-back messages are processed in following steps
BPEL engine assigns the call-back message to delivery service
Delivery service saves the message into dlv_message table with state 'UNDELIVERED-0'
Delivery service schedules a dispatcher thread to process message asynchronously
Dispatcher thread enqueues message into JMS queue
Message is picked up by MDB
MDB delivers the message to actual BPEL process waiting for call-back and changes state to 'HANDLED=2'
So given above steps, there is always possibility that message is available in dlv_message table but MDB is failed in delivering it to BPEL process which keeps message always in state= 0.
Following program can be tailored to suite one's own requirements to recover from such state-0 messages.
Note:- This program contains logic to recover from invocation and call-back messages. Please comment out appropriately.
package bpelrecovery;
import com.oracle.bpel.client.*;
import com.oracle.bpel.client.util.SQLDefs;
import com.oracle.bpel.client.util.WhereCondition;
import java.util.ArrayList;
import java.util.Hashtable;
import java.util.List;
import javax.naming.Context;
public class bpelrecovery {
public bpelrecovery() {
public static void main(String[] args) {
bpelrecovery recover = new bpelrecovery();
String rtc = "";
try{
rtc = recover.doRecover();
catch (Exception e){
e.printStackTrace();
rivate void recoverCallbackMessages(List messages)
throws Exception
String messageGuids[] = new String[messages.size()];
for(int i = 0; i < messages.size(); i++)
ICallbackMetaData callbackMetadata = (ICallbackMetaData)messages.get(i);
String messageGuid = callbackMetadata.getMessageGUID();
messageGuids[i] = messageGuid;
System.err.println((new StringBuilder()).append("recovering callback message =
").append(messageGuids).append(" process
[").append(callbackMetadata.getProcessId()).append("(").append(callbackMetadata.getRevisionTag()).ap
pend(")] domain [").append(callbackMetadata.getDomainId()).append("]").toString());
Locator locator = getLocator();
IBPELDomainHandle domainHandle = locator.lookupDomain();
domainHandle.recoverCallbackMessages(messageGuids);
public String doRecover() throws Exception{
// Connect to domain "default"
try{
System.out.println("doRecover() instantiating locator...");
Locator locator = getLocator();
System.out.println("doRecover() instantiated locator for domain " +
locator.lookupDomain().getDomainId());
// look for Invoke messages in need of recovery
StringBuffer buf1 = new StringBuffer();
WhereCondition where = new WhereCondition(buf1.append(SQLDefs.IM_state).append( " = "
).append(IDeliveryConstants.STATE_UNRESOLVED ).toString() );
System.out.println("doRecover() instantiating IInvokeMetaData... with where = "+ where.getClause());
IInvokeMetaData imd1[] = locator.listInvokeMessages(where);
System.out.println("doRecover() instantiated IInvokeMetaData");
// iterate thru the list
List l1 = new ArrayList();
for (Object o:imd1){
l1.add(o);
// See how many INVOKES are in the recovery zone
System.out.println("doRecover() instantiated IInvokeMetaData size = " +l1.size());
// look for Callback messages in need of recovery
StringBuffer buf = new StringBuffer();
where = new WhereCondition(buf.append(SQLDefs.DM_state).append( " = "
).append(IDeliveryConstants.TYPE_callback_soap ).toString() );
System.out.println("doRecover() instantiating ICallbackMetaData... with where = "+
where.getClause());
ICallbackMetaData imd[] = locator.listCallbackMessages(where);
System.out.println("doRecover() instantiated ICallbackMetaData");
// recover
List l = new ArrayList();
for (Object o:imd){
l.add(o);
recoverCallbackMessages(l);
catch (Exception e){
e.printStackTrace();
return "done";
public Locator getLocator(){
System.out.println("getLocator() start");
Locator locator = null;
// set JNDI properties for BPEL lookup
String jndiProviderUrl = "opmn:ormi://localhost:6003:oc4j_soa/orabpel";
String jndiFactory = "com.evermind.server.rmi.RMIInitialContextFactory";
String jndiUsername = "oc4jadmin";
String jndiPassword = "welcome1";
Hashtable jndi = new Hashtable();
jndi.put(Context.PROVIDER_URL, jndiProviderUrl);
jndi.put(Context.INITIAL_CONTEXT_FACTORY, jndiFactory);
jndi.put(Context.SECURITY_PRINCIPAL, jndiUsername);
jndi.put(Context.SECURITY_CREDENTIALS, jndiPassword);
jndi.put("dedicated.connection", "true");
try{
System.out.println("getLocator() instantiating locator...");
locator = new Locator("default", "welcome1", jndi);
System.out.println("getLocator() instantiated locator");
catch (Exception e){
System.out.println("getLocator() error");
e.printStackTrace();
return locator;

Error: GadgetMsgs.xml could not be processed

I am having trouble with several asp gadgets failing to load the GadgetMsgs.xml file. The error I receive is:
ERROR in ReadMsgs: This Gadget uses resource file D:\Inetpub\wwwroot\cp-community\EN\GadgetMsgs.xml, but the file could not be processed. Please inform your Plumtree Administrator.
Instinctively, I think that there is a problem with contention between the gadgets. The gadgets work fine until their refresh time arrives, or as was the case this Monday morning, the Portal was restarted.
There are about eight gadgets in the same IIS web application that are each loading the internationalization object and are using the same set of gadgetmsgs.xml files. Has anyone else seen this configuration cause problems and know of a technique to fix it?
Thanks.

Back up all data.
From the menu bar, select
 ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.

Sender File Adapter not able to get file via FTP from an external system

Hi,
I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml". The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
The connect mode is Permanently and the transfer mode is Binary.
Can you help me?
Thanks.
T.

Hi Teresa,
does this case appears with a file size higher the others?
Personally, I do not recommend to have a polling under 1min.
10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
regards.
mickael

File should not be processed until completely written

Similar Messages

Maybe you are looking for