File Size Conversion Problem

I recently began to see large pdf files being generated intermittently, even at relatively low dpi.
So to test, I took two jpg photos and converted them to pdf using Acrobat 9.2 Pro at 72, 144, 300 and 600 dpi. The resulting pdf file sizes are 106KB, 1920KB, 1195KB and 361KB respectively. I have never experienced this problem before, so I un-installed and re-installed the program, but got the same results. Any thoughts? Thanks

Any details on how you did the conversion? Are they B&W, grayscale, 256 colors, or a 24-bit color graphic? What is the size?
Of course you may also see compression aspects coming in. How you select the DPI can make a difference. In one package I have, when I adjust the DPI, the size changes and the resultant file size when printed to PDF remains about the same. The size combinations you give seem real strange, but it may be a combination of DPI, size of graphic, and downsampling by Acrobat. If you do not want the latter, then you should probably use a Press or Print setting if printing to retain the max resolution of what you are printing.
Note I feel into a discussion of printing, but you may have done something differently. How you set the DPI could be an issue. If these were graphics that you imported into a PDF, then give the graphic size, not just the DPI. We have to be able to replicate your problem to help in many cases. We at least need to know the steps you used as the answer may be starring us all in the face when the steps are provided.

Similar Messages

How to debug file content conversion problems?

Hi,
I'm trying to debug a file content conversion problem. I'm mapping a few nodes in an IDOC to a file of fixed length fields. I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created. Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion. How do I debug this because there is no descriptive error in the XI log? If this node is not present, the file gets generated fine.
Thanks,
Basant Gupta

Hi,
If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
So it wil help you debug the situation.
If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
/people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
Regards,
Moorthy

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like <b>%store_code%_%current_date%_sitemaster.xml</b> , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,<b>we have to suppress the current_date node of the xml content</b> . i have tried to suppress the current_date using these <b>DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut</b> , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

File Size & Export Problems

Hi, my name's Jorge and I have a couple of questions.
First, is I make machinima movies and my latest movie is 21:48 long. In order for it to be uploaded to a certain website, it needs to be under 200 MB's. I'd like the visual quality to at least be decent.
What is the best way to export my movie from FCE and have it under 200 MB's?
I'm pretty sure this can be done, because a while ago, someone else made a movie that was also 21 minutes long and the file size for her movie was only 131 MB's, and I can't seem to make mine less than 319.2 MB's.
This brings me to a problem I'm having. I've signed to be an official director at Machinima.com and they require the movies to be in wmv format. It also says that the movie files would be smaller sizes, so I figured that would help my file size problem.
So I tested it out, trying to export my movie from FCE at the wmv specs they required, but it only exports 30 seconds of the movie. (?) Why is this happening and what can I do to fix this?
Since I have signed on with Machinima.com, I need to be able to export my movies in this wmv format.
Any help would be SO GREATLY appreciated.
Jorge

So I tested it out, trying to export my movie from FCE at the wmv specs they required, but it only exports 30 seconds of the movie. (?) Why is this happening and what can I do to fix this?
The trial version of flip4mac only allows up to 30 seconds per export. You'll need to purchase one of the flip4mac plugins if you want to export a complete video.
http://www.telestream.net/flip4mac-wmv/overview.htm
-DH

File Content Conversion Problem

Hi
I have a flat file having 10 fileds with fixed length of field 7 characters
abc bcd dce cef ecf fgi
123 234 343 233 434 343
322 222 222 222 222 222
+++++++++++++++++++++++++++++++
XML CODE FOLLOWS
+++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_send xmlns:ns0="http://OTO-Continue.com">
-<SEND>
   <abc>343</abc>
   <bcd>343</bcd>
   <dce>434</dce>
   <cef>3434</cef>
   <ecf>343</ecf>
   <fgi>434</fgi>
</SEND>
</ns0:MT_send
As per the client req I'm going with FCC. The file is picking fine with the FILE. But not picking with the FCC.
The parameters which I gave are as follows.
SOURCE I feel it is fine since file is picking fine and keeping the same for FCC also.
PROCESSING
QOS -- Exactly Once
Poll Interval -- 10
Processing Mode -- Delete
Empty-File Handling -- Process empty files
CONTENT CONVERSION Parameters
Document Name -- (am giving sender data type name) DT_send
Document NSpace -- http://OTO-Continue.com
Recordset Name -- SEND
Recordset Structure -- SEND,*
Recordset Sequence -- Ascending
Recordset per Message -- 0
And in the table the parameters am settings are
SEND.fieldNames                 abc,bcd,cde,def,efg,ghk
SEND.fieldFixedLengths      7,7,7,7,7,7       (because each and every field has 7 characters)
SEND.keepIncompleteFields       No
SEND.fieldFixedLengthType      char
SEND.fieldContentFormatting     trim
SEND.fieldEndSeparator            'nl'
This was the configuration. But this is not working I monitored the Communication Channel and file is not reading and not getting deleting.
What actually went wrong in above configuration. Why it is not working.
Thanks.

Hi Swarna,
CONTENT CONVERSION Parameters
Document Name -- ?
DocumentNSpace -- ?
Recordset Name -- ?
Recordset Structure -- ?
Recordset Sequence -- Ascending
Recordset per Message -- ?
Document Name - <Message Type> eg:- (MT_ABC)
DocumentNSpace - Name space of your MT
Recordset Name - The root node( Which has one occurence)
Recordset Structure - The parent node of the fields(can have multiple occurences)
Recordset Sequence -- Ascending
Recordset per Message -- 1/* (No.of records per each record set)
In your structure
+++++++++++++++++++++++++++++++
XML CODE FOLLOWS
+++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_send xmlns:ns0="http://OTO-Continue.com">
-<SEND>
<abc>343</abc>
<bcd>343</bcd>
<dce>434</dce>
<cef>3434</cef>
<ecf>343</ecf>
<fgi>434</fgi>
</SEND>
</ns0:MT_send
There is no root node, so in your FCC you need to mention your RecordsetName and you can ignoreRecordSetName in result structure. Check the following blog simulates your requirement.
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
Regards,
Prasanna

PDF file size expansion problem

A colleague sends me a 4 MB PDF file from his Dell. I receive it on my Macbook Pro and save it; it's now a 7.6 MB file. I write a new one line email, and attach the PDF to my email; it now shows up as a 9.8 MB attachment. When I send; the email size shows up as 10.1 MB file, which blows the Exchange Server limit (or so I believe; the error suggests a file size limit issue, but I've not yet verified the exact file size limit of the Exchange Server service we use). I expect some modest expansion/differences, but 2.5 MB every time I just look at it doesn't make sense.
When I duplicate this procedure with my Gateway PC, (same file, email, exchange server etc.) the file size remains constant at 4 MB.
I just noticed the Gateway has Adobe Reader, the Macbook Pro does not. Could the way OSX is treating the PDF be causing this, would Adobe Reader (free or full version) solve this and (3) what technically is happening here?
Help and understanding is very much appreciated.
Using OSX 10.6.7

Adobe Reader is free. Don't confuse it with Adobe Acrobat. Get it at http://get.adobe.com/reader/

Recevier File Content Conversion Problem

HI,
i am using File COntent Conversion on Recevier Side for getting output in .txt file.
My Input File:
0112345010101
021111112222
03100001111112222
03100011111212223
041000011111
021231116722
03100781119012332
041005611001
059453287699
My Fields are: "header,hbatch,body,tbatch,trailer"
RecordStrucure: header,hbatch,body,tbatch,trailer
I used fiexefiledlenghts and seperator and end seprator. But its not working.
Please guide me to generate the txt file in the output.
Regards,
Giridhar.C

Thanks you all for your quick responses.
I have used Sender FCC and created the following XML Format on the Receiver Side.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_INPUT xmlns:ns0 = "http://sealchennai.com/FCC2">
    <header>
        <key1>01</key1>
        <name>12345</name>
        <date>01010</date>
    </header>
    <hbatch>
        <key2>02</key2>
        <hvalue1>11111</hvalue1>
        <hvalue2>12222</hvalue2>
    </hbatch>
    <hbatch>
        <key2>02</key2>
        <hvalue1>12311</hvalue1>
        <hvalue2>16722</hvalue2>
    </hbatch>
    <body>
        <key3>03</key3>
        <bvalue1>10000</bvalue1>
        <bvalue2>11111</bvalue2>
        <bvalue3>12222</bvalue3>
    </body>
    <body>
        <key3>03</key3>
        <bvalue1>10001</bvalue1>
        <bvalue2>11112</bvalue2>
        <bvalue3>12223</bvalue3>
    </body>
    <body>
        <key3>03</key3>
        <bvalue1>10078</bvalue1>
        <bvalue2>11190</bvalue2>
        <bvalue3>12332</bvalue3>
    </body>
    <tbatch>
        <key4>04</key4>
        <tvalue1>10000</tvalue1>
        <tvalue2>11111</tvalue2>
    </tbatch>
    <tbatch>
        <key4>04</key4>
        <tvalue1>10056</tvalue1>
        <tvalue2>11001</tvalue2>
    </tbatch>
    <trailer>
        <key5>05</key5>
        <value1>94532</value1>
        <value2>87699</value2>
    </trailer>
</ns0:MT_INPUT>
But i need the Output in the follwont text format on Receiver Side.
01,12345,010101
02,11111,12222
03,10000,11111,12222
03,10001,11112,12223
04,10000,11111
02,12311,16722
03,10078,11190,12332
04,10056,11001
05,94532,87699
Please do the needful help to create the fiel in the text format.
Regards,
Giridhar.C

IDOC to File - File Content Conversion Problem

Hi,
The scenario is IDOC to File. I am using file content conversion for my receiver adapter. The receiver adapter parks the file in the receiver system but the file has no data. In SXMB_MONI on checking the payload at every step, the data is transformed successfully. I am able to see the data at the receiver payload but the file in the receiver system has got no data.
I have used all possible parameters in the receiver adapter:-
Recordset.fieldFixedLengths   1,1,1
Recordset.endSeparator        'nl'
Recordset.fieldNames          rec_type,action,del_in
Recordset.fixedFieldType      char
Kindly advice if some more parameters need to be added.
Thanks in advance.
Krishna

Hi,
if you're using stnadard SAP idoc
you can try using the same approach as specified
in this doc (but with module IDOC to XML insdead of XML to IDOC)
https://websmp203.sap-ag.de/~sapdownload/011000358700001795162005E/HowToIDocXMLToFlat.pdf
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

File adapter: Receiver File Content Conversion problem.. XML to CSV..!!

Hi,
I am facing some problem in FCC for Receiver adapter. It has to convert from XML to CSV File.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:PaymentFull_Target xmlns:ns0="http://sdn.com/Payment">
- <RECORDSET>
- <Header>
<LineItem>1</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
- <Header>
<LineItem>2</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
- <Header>
<LineItem>3</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
</RECORDSET>
</ns0:PaymentFull_Target>
Output File is coming only with lineitem values , remaining fields are not coming.
*1,2,3*
FCC Used...
RecordSet Structure -- Header
Header.fieldNames -
LineItem,SaleNumber,TransNumber,Store,variant,TransType,Adjustm_Type
Header.fieldSeparator----- ,
Header.endSeparator----- 'nl'
Did I miss anything.. any idea whats going wrong?
Thanks
Deepthi

Hi Deepthi,
Mention the occurrence of header in Recordset
You specify like this:
Recordset: Header, *
Header.fieldSeparator : u2018Field Separatoru2019
-->For FCC on Receiver side you donu2019t have to mention the field names.
-->The u2018endSeparatoru2019 parameter needs to given for substructure only
Check this links:
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Rgds,
Akhila

File Size Increasing Problem

Hi gurus ,
We using R/3 Server with oracle database , Now a days we facing one problem , the size of the file name stderr4 increased in GB s . Kindly give me the suggestion to stop this .
Regards
Selvan .SP

Hi,
Stderr* are used to record syslog and logon check, when the system is up.
Some causes of this growth:
In the case of repeated input/output errors of a TemSe object (in particular in the background), large portions of trace information are written to stderr. This information is not necessary and not useful in
this quantity.
Please confirm that the following reports are running daily as per note #48400
Cheers!

File Content Conversion Problem: Sender File Adapter

Hi All,
In Sender File Adapter, how to spilt the single line into different lines using + as a separator. Plz see below my source file.
#SMESS=IV01:672633SAP:676968:::NL51:02:11+
COPS=678713:676968:070416:IV01'3:11IVFR=678713:PDA and'IND 2'9206 AD'Dtn'INIVDA=070416IVNR=6264008195:676968add1
#EMESS=0+
In above txt file there are 3 lines.
1st line starts with #SMESS
2nd line starts with COPS
3rd line starts with #EMESS.
In 2nd line, if u observe there are 3 lines separating by +. My task is, I have to spilt the 2nd line into 3 lines using + separator.
I already used the xx.endSeparator as '+' to spilt the line but it is not working....
Could anyone help me how to do this. This is very urgent
Thnx,
Kumar.

Hi Shankar,
1) My Expected XML Structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_IV01 xmlns:ns="http://ms.com/dev/ms">
- <Recordset>
- <DT_SMESS>
<D_9901>IV01</D_9901>
<D_9902>672633SAP</D_9902>
<D_9903>676968</D_9903>
<D_9904 />
<D_9905 />
<D_9906>NL51</D_9906>
<D_9907>02</D_9907>
<D_9908>11</D_9908>
</DT_SMESS>
- <DT_COPS_2>
<D_C022>678713</D_C022>
<D_C023>676968</D_C023>
<D_C008>070416</D_C008>
<D_C111>IV01'3</D_C111>
<D_H559>11</D_H559>
</DT_COPS_2>
- <DT_IVFR_2>
<D_C024>678714</D_C024>
<D_D333>PDA and'IND 2'9206 AD'Dtn'IN+</D_D333>
</DT_IVFR_2>
- <DT_IVDA_2>
<D_D365>070416</D_D365>
</DT_IVDA_2>
- <DT_IVNR_2>
<D_D189>6264008195</D_D189>
<D_H364>676968add1</D_H364>
</DT_IVNR_2>
- <DT_EMESS>
<D_D9901_1>0</D_D9901_1>
</DT_EMESS>
</Recordset>
</ns:MT_IV01>
2) I am not getting any error even if I use key Fields or Not becoz in the RecordSet Structure I mentioned DataType, 1 instead of DataType, *.
3) FCC Parameters:
Document Name: MT_IV01
Document Namespace: http://ms.com/dev/ms
Recordset Structure: DT_SMESS,1,DT_COPS_2,1,DT_IVFR_2,1,DT_IVDA_2,1,DT_IVNR_2,1,DT_EMESS,1
Recordset Sequence: Ascending
Key Field-type : String (Case-sensitive)
4) Error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'DT_COPS_2':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified!

Sender File Adapter Conversion problem - how to start new recordset?

Hi guys!
I have a source file like following:
aaaakkkkkk
uuuupppppp
&&hhhhffffff
6666uuuuuu
3333rrrrrrrr
&&kkkkoooooo
which means - fixed length 4,6 and && starts new recordset.
I need to get structure like:
<recordset>
<item>
    <a>aaaa</a>
    <b>kkkkkk</b>
</item>
<item>
    <a>uuuu</a>
    <b>pppppp</b>
</item>
</recordset>
<recordset> ... with h,f and 6,u </recordset>
<recordset>
<item>
    <a>kkkk</a>
    <b>oooooo</b>
</item>
</recordset>
Any ideas?
Let's say, I can add && on the beginning of the file and other "lite" changes... but structure stays the same...
so, how to start new recordset? with which conversion parameter? for items it is clear...
Thanx a lot!
Olian
Message was edited by:
        Olian Saludew

aaaakkkkkk<end_of_line>&&uuuuwwwwww<end_of_line>...
then normal parameters should work fine,
item.fieldFixedLengths==4,6
Item.fieldNames=field1,field2
item.endSeparator=<end_of_line>

File Content Conversion Problem of not generating empty file

Hi All,
i have 3 input text files for my BPM to process.
if any of the text file is empty, i need to generate an alert message that the file is empty........but the problem is file adapter does not generate a XML message for the empty text file..........
<b>Can anybody suggest how to generate the alert if any of the 3 text files is empty.</b>
Thanks,
Rajeev Gupta

Rajeev~
I dont find ur mail Id in ur Business card.Post the same..I will send you across a PDF with steps to write a adapter module.You would need to extend the same to check the payload for empty data and accordingly create a XML payload with checkpointer.
For validating this value in a BPM use the FORK step and check the payload in the condition editor.
Refer to this url for the same.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/bb/e1283f2bbad036e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/bb/e1283f2bbad036e10000000a114084/content.htm</a>

Reciever File Content conversion problem

Hi,
i am converting idoc into txt file
in sxmb_moni,the payload of target xml is,
<?xml version="1.0" encoding="UTF-8"?>
<ns0:HRPayroll_014_MT xmlns:ns0="http://XXXX.com/xi/:XXX">
<Infotype014>
     <infotype>001400</infotype>
     <zfty>400</zfty>
     <zicnum>111111</zicnum>
     <begda>20070428</begda>
     <lgart>4000</lgart>
     <betrg>0.00</betrg>
     <anzhl>99.00</anzhl>
</Infotype014>
</ns0:HRPayroll_014_MT>
in File adapter i did like this-
Infotype014.fileldNames       infotype,zfty,zicnum,begda,lgart,betrg,anzhl
Infotype014.fieldFixedlenghts       6,3,7,8,4,13,12
Infotype014.processConfiguration       FromConfiguration
Infotype014.endSeparator       'nl'
and in RunTime Workbench
i am getting like this
<b>Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter 'Infotye014.fieldFixedLengths' or 'Infotye014.fieldSeparator' is missing</b>.
Channel has not been correctly initialized and cannot process messages
please guide me ..how to declare in field Content conversion Prameters.
i dont require column names.fields are fixed lenghts.
regards
Jagan

Hi amitanshu,
Thanks for your response..
i given only fieldFixedLenghts
the auditlog is
Time Stamp Status Description
2007-05-10 15:15:58 Success Message successfully received by messaging system. Profile: XI URL: http://saps020:50100/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2007-05-10 15:15:58 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-05-10 15:15:58 Success Message successfully put into the queue.
2007-05-10 15:15:58 Success The message was successfully retrieved from the receive queue.
2007-05-10 15:15:58 Success The message status set to DLNG.
2007-05-10 15:15:58 Success Delivering to channel: FILE_HRP_RECEIVER_HR_PAYROLL014_CC
2007-05-10 15:15:58 Success MP: entering
2007-05-10 15:15:58 Success MP: processing local module localejbs/CallSapAdapter
2007-05-10 15:15:58 Success File adapter receiver: processing started; QoS required: ExactlyOnce
2007-05-10 15:15:58 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
Time Stamp Status Description
2007-05-10 15:15:58 Error Exception caught by adapter framework: Channel has not been correctly initialized and cannot process messages
2007-05-10 15:15:58 Error File adapter receiver channel FILE_HRP_RECEIVER_HR_PAYROLL014_CC is not initialized. Unable to proceed: null
2007-05-10 15:15:58 Success Acknowledgement sent successfully for type: SystemErrorAck
2007-05-10 15:15:58 Success Acknowledgement creation triggered for type: SystemErrorAck
2007-05-10 15:15:58 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages.
2007-05-10 15:15:58 Success The asynchronous message was successfully scheduled to be delivered at Thu May 10 15:20:58 EEST 2007.
2007-05-10 15:15:58 Success The message status set to WAIT.
my adaper is in Active status only
please guide me
regards
Jagan

Sender file content conversion problem

hi Masters,
I have sender side structure like this...below..
emp_row                          unbounded.
   empid
   name
   city
   country.
actually i had given few id with names and other details which i stored in txt file .
like
001, ram, newyork, usa.
002 ,john,london,uk.
003, smit,tokyo,japan.
but if i see in reciever side then i wil get xml file where only 001,ram,newyork,usa. is mentioned ... and remaining records are not there..
wht is the fault and how to rectify tht fault please help me ..
Thanks in Advance ,
jp.

recordset structure -- emp_row
emp_row.fieldSeparator - ','
emp_row.endSeparator - 'nl'
if you have "." at the end of each record in your file then remove it and change it to new line -- "nl" -- by hitting the enter key on your keyborad at the end of each record Or if you want to use "." only then replace 'nl' in the above endSeparator parameter list with '.'
PS: Share u r current content conversion parameter settings also
Cheer's

File Size Conversion Problem

Similar Messages

Maybe you are looking for