File size different in Bridge CS3 and Photoshop

I'm using PS CS3 and Bridge CS3 on a Macbook Pro. I have about 40 files that are about 50MB when opened in PS. In Bridge, under the thumbnails, the file size is pretty close to that, sometimes the exact amount, sometimes off by a couple/few MBs. I've been told this is due to some compression "on the disk" by Bridge. All the files are PSDs, by the way, and they are all flattened.
What I don't understand is why just a *few* files that are 50MB in PS are showing up MUCH smaller in Bridge; e.g., 36MB. If it's due to compression, why would Bridge compress just a few files so much?
I'm wondering if this has to do with the cached thumbnails, and maybe the thumbnails aren't showing the latest version (with accurate size) of the file. I don't know much about the cache, and I'm afraid to "purge the cache" without knowing anything about it. Also, if it has to do with preferences, I'm don't really know about that, either.

Bridge does not compress any files whatsoever. Bridge is not an image editor, it's nothing but a browser that hands the files to their respective applications. Bridge does not "open" or "save" files, it can't compress them in any shape or form.
What you are seeing is the difference between the opened, uncompressed file in RAM and the space the file occupies on disk once
Photoshop has saved and compressed it.
The Bridge cache has nothing to do with any of this.

Similar Messages

Why is jpeg file size different in CS 5 and Photoshop CC?

If I open a jpeg file in both CS5 and Photoshop CC, and then "save" the files, the file from CC is much smaller than the file from CS5.
The size and compression ratios are the same, but the file size is different. (It is about 1/2 the size).

Bridge does not compress any files whatsoever. Bridge is not an image editor, it's nothing but a browser that hands the files to their respective applications. Bridge does not "open" or "save" files, it can't compress them in any shape or form.
What you are seeing is the difference between the opened, uncompressed file in RAM and the space the file occupies on disk once
Photoshop has saved and compressed it.
The Bridge cache has nothing to do with any of this.

Attempting to update Bridge CC and Photoshop CC 2014 generates error "Unable to extract the downloaded files. Press Retry to download again.(U44M1I210)

Attempting to update Bridge CC and Photoshop CC 2014 from the Creative Cloud program generates error "Unable to extract the downloaded files. Press Retry to download again.(U44M1I210). I am running Windows 7. Previous traffic on this topic has not helped my situation.

Please clean AAM cache By deleting following folder contents:
For Mac:
· /Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
· C:\Users\\AppData\Local\Adobe\AAMUpdater\1.0
Then try running Updates.
Regards,
Ashutosh

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Unable to Open Images in Bridge CS3 and Continuing Icon issues!

Re: Icon issues in Bridge CS3 and also with Photo Downloader that have never been there before.
So, these are the issues. Just one of the folders that previously would show thumbnails now only shows DNG icons, and none will open in Photoshop to let me work on previous image. Issue #2 - can't download images with Photo Downloaders - both my wife's Canon G9 only shows CR2 icons, and my Nikon D300 only shows NEF icons - neither of these issues had appeared before or been an issue. Third issue. None of my Bridge folders - even those with regular thumbnail immages- will open now - get a message that says words to the effect of Photoshop doesn't recognize this type of file. Computer is a Mac, with OS 10.5.8
I recently tried to make more room on HD, so must have taken some critical files/commands out by accident.
Thanks for your time and previous suggestions - still not working. I'm sure that in trying to correct things have made things even worse- as may be noticed by the two snapshots I've attached. The first is one from a library from my user section. The second library image is from my hard drive. Hopefully you and others aren't laughing or crying too much over what you see - redundantcy, etc! All of my energies have focused on taking photos, obviously none to proper setup/use of organizing things on my Mac. But after the laughing has stopped, any help will be tremendously appreciated - am most anxious to getting back to working with and saving images.
"user image"
Hard Drive image:
Thanks in advance

First of all, if you don't know much about how applications work inside of the OS, its wise to not look in the application folder(s). Deleting anything here can make your apps go haywire. If this happened, then you are best to 1)unregister photoshop, 2) uninstall your entire suite. 3) reinstall the suite and finally 4) reregister photoshop.
All images/textures/photo's including dng, cr2 and nef files need to be stored in your pictures folder and no where else, unless you're an intermediate user on your OS. In your pictures folder you can create folders for organizing the pictures whether by location, season's, time, or file format.
Then when you back up you can just drag a copy of the files to another drive including cd's or dvd's.
This will make sure you don't accidently delete important app files.
All this said, my OS of choice is Windows, so if anything does not sound right, thats why.
Hopefully this helps...

IView Media Pro erases adjustments and ratings in Bridge CS3 and Camera RAW 4.2

OUCH! I seem to have lost about a day's worth of work. I rated and adjusted my Canon cr2 RAW files using Bridge CS3 and ACR 4.2. Then I used iView Media Pro 3.1.3 to add keywords. When I opened the files back up in Bridge CS3, my ratings and adjustements were gone. Actually, when I open the sidecar files in a text editor, I can see the adjustments, but ACR and Bridge can't read them. Anyone else seeing this? If so, how do you fix it or work around it???
Edward McCain
Tucson, AZ

Have you tried purge cache for folder?
iView Media Pro is now Expression Media 1, maybe this 'upgrade' works for you.
You know that you can add keywords and sets in Bridge as well?

I want to install two update (Bridge CC and Photoshop CC (2014) But I have a error code message : U43M1D204 I try many times to download these two update but nothing to do...

I want to install two update (Bridge CC and Photoshop CC (2014)
But I have a error code message : U43M1D204
I try many times to download these two update but nothing to do...

Error downloading, installing, or updating Creative Cloud applications

I have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!

I am about to buy the above products for home and a laptop I bought the high res laptop for editing photos and the photos look great on the display but I cannot use photo shop and lightroom
has any body had this problem and is there a simple fix that I have missed
taking the res down in the control panel reduces the res but does not effect the programme
by the way the dell xps is great
dave

Thanks for the info I know that there were problems with the high res
I am using the latest photoshop and bridge from the cloud but only using the trial copy at the
moment
I will look closer and try to scale it to a suitable level
thanks dave
Original message----
From : [email protected]
Date : 06/02/2015 - 00:39 (GMTST)
To : [email protected]
Subject : i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    created by gener7 in Photoshop General Discussion - View the full discussion
There is that pitfall in buying HiDpi laptops for Windows.
Only Photoshop CC 2014 has the option to scale the UI 200% in order to make it usable on these hires screens.
CC and earlier does not have this and Adobe would have to retrofit them. Not likely with older products.
Gene
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7167666#7167666 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7167666#7167666
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can't Open jpeg files from Bridge CS3 to PhotoShop CS3

This is really weird. I had a trial version of CS3 and bridge worked fine. That ran out, so I tried CS2 to see if I could get by with the older version. CS2's bridge worked just fine.
Then I installed a full version copy of CS3 and removed CS2 (to free up space) and for some bizarre reason, I cannot open any files from bridge into Photoshop. It's the CS3 bridge because I clicked on the Help, About Bridge and it showed CS3.
When I just click "open" under file, it tries to open with Illustrator. When I click, "open with" I get this list: Adobe Illustrator CS3 (default), Firefox 2.0, Internet Explorer 6.00, and Paint 5.1.
I can't figure out a way to change the default to CS3, and it worked fine with the trials.
Please advise.

It was a nice thought. I just did it, and associated all .jpg type files with photoshop, but no such luck in solving issue. I did figure out a way around it that kinda works, but not nearly as convenient. I drag select a group, then hold-click on the group and toggle into Photoshop, then let go. It pastes the group there. However, if I control click to select a group (or deselect within a group), I can't hold-click. So I have to do smaller groups at a time if I want to bypass certain pictures that get grabbed in a bigger group--does that make any sense at all?

Differing CMYK in Acrobat and Photoshop (same file)

Hi,
I posted this in the Acrobat forum and haven't had a response yet. I am also posting here since it is related to both Acrobat and Photoshop, in case someone in the Photoshop forum can respond. Thanks.
I read different CMYK values for the same PDF file in Acrobat and Photoshop. (Acrobat 9 and Photoshop CS4)
I read the colours in Photoshop after opening the file as 16-bit CMYK. I read the colours for the same PDF file in Acrobat in Output Preview (Point Sample).
Amongst the most noticeable is black:
Photoshop:
C=75%
M=68
Y=67
K=90
Acrobat:
C=0%
M=0
Y=0
K=100
How can that be? Which one to believe?

If your assumption is correct, I don't understand why Photoshop would overrule the CMYK colours in the PDF and interpret them differently, especially since when opening the PDF in Photoshop, I select the CMYK 16-bit option.
Why not? You are merely tagging the objects and force-overriding the color conversion rule based on the original state they were embeded in. Nothing gets ever truly converted in the sense it would in PS. This is merely a way of fixing issues in pre-press and generating the ink plates based thereon and IMO PS is correct in ignoring these device dependent settings and uses its own color management to convert. The way I see it, there is nothing wrong here.
Mylenium

Best file for importing images from Illustrator and Photoshop for small file sizes

Hello Adode consults!
I'm in the process of preparing an inDesign file for a school project -- I've already had a few harrowing experiences sending large files to the printer that are too large to process (and a very grumpy computer, etc). The end result will be a poster around 36 inches by 4 or 5 feet.
I'm wondering if there are any best practices for making sure that the files imported into InDesign are a manageable size to begin with. Should I, for instance, be saving each file as a jpeg before placing in Indesign?
Thanks!
-Katherine

No, you should not save every file as JPG before placing it in INDesign. JPG is only usefull for raster images (like photos) without any transparency in high quality.
When you place images use:
For raster images from Photoshop psd (rgb with color profile)
For raster images from Photoshop with form layers, texts or any vector element use PDF (or PDP) with layers.
For vector graphics from Illustrator use AI files or PDF.
For layouts from other InDesign projects use either the INDD itsself or export a PDF/X4.
But to the printer deliver a PDF according to their standards. E.g. when they need CMYK files export as PDF/X1a with the required output color space and the resolution they want. Produce the pdf via Export (Print).
Don't deliver open INDD. File size should for printing projects not be an issue.

Bridge CS3 and Duotone: odd behavior

Hello all.
Are there any users of Bridge CS3 that work with duotone images?
The new version of bridge displays the color mode correctly as Duotone, but now the color profile is still the profile of what it was when the image was in RGB mode (Adobe RGB, ProPhoto, etc).
In Bridge CS2, the color profile of duotone images was always displayed as sRGB IEC1966-2.1. At least then it was constant across all my images.
However in both Photoshop CS2 and CS3, duotone images show up as "untagged duotone" Color Profile what gives?
Any ideas?
Thanks.
-Andrew

Ramón,
Thank you for your reply. The only times I have purged the cache has been through the Tools menu, as i've read from various people, including you, that the other option is "broken".
Omke,
In Grayscale color mode, Bridge shows the color profile that's embedded in the image. That comes from the Gray Working Profile selected in Photoshop's "color settings." The only way i know of to create a duotone is to start with a grayscale image. Even the "conditional mode change" function in File > Automate converts the image to grayscale as an intermediate step.
Now, on to the original question, open to anybody who works with duotones in Bridge...
a) Does anybody know why Bridge CS3 is treating the color profile of duotones differently than in CS2.
b) is there any way to make it consistently show one profile? -- at this point i don't care muchly what profile it's displaying as long as it's the same for all my duotones.

Color Cast Only On Mac Generated jpg files When Viewed In Bridge Cs3 Preview

Hi,
( Issue With Cs3 Bridge Viewing Jpgs - Getting Colour Cast on the Mac Generated Jpgs Files Only When Viewed In Bridge Cs3 On PC )
Using CS3 creative suite Mac & PC and viewing all files on the PC.
We have psd files when viewing in bridge they are ok and save jpgs via PS3 both on the Mac & PC off the same PSD file that we started with.
But when viewing these jpg files in bridge we get a red cast only when viewing from the Mac generated files from the same PSD we started with.
When we open the jpg files up in Photoshop all of them are ok we no issues only when viewing in bridge we get the red cast.
All PSD files have the same information content:
Bit depth
Colour space
Pixel size
Why are we getting this happening.
Thnx

Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto:

Bridge CS3 and error message

On my old Windows XP with CS3, Bridge would often crash. No pattern I could see.
Recently bought a new Windows 7 PC with iCore 7 processor and installed same software. Had the same problem as above.
I also have just bought a new laptop running Windows 7 with a dual core processor. Loaded same software and also had the same problem.
The Photoshop CS3 (and Bridge) is as up to date as Adobe provide, so is Windows on all three machines. The common element in all three seems to be CS3, or at least, that's how it appears.
When it crashes on the two Windows 7 machines, it wants to send the following files to Microsoft. Haven't used the old XP machine for a while and don't have any notes of those messages.
All three files begin: C:\Users\John\AppData\Local\Temp\
and carry on:
WERB144.TMP.WERInternalMetadat.xml
WERE5BD.tmp.appcompat.txt
WERF632.tmp.mdmp
This is way above my knowledge. Can anyone help, please? What does it mean and could I fix it easily?
In the meantime, I'm doing the 30 day trial of LR2 which may be the best way to go. But I would like to know why Bridge is behaving as it is.
Thanks!
John Walmsley

Thanks, Curt.
I'll give this a try and report back. All three PCs are using the same BitDefender Total Internet Security software so that is definitely a common feature.
John Walmsley

Bridge CS3 and Camera Raw

Hello, I have Bridge CS3 that came with Adobe Web Standard that I bought when I have doing web design. I also have Photoshop CS that I use for my camera digital editing. At a camera club today they were using Bridge and Photoshop CS5 to show what it can do. The man completing the demo said that Camera Raw was inbuilt into Bridge and that I should have it. I've been using Adobe DNG convertor for my RAW editing as I didn't know nothing about Camera Raw but seeing it in action and how much better it is over the DNG I want to use that instead.
I've searched high and low for Camera Raw on my PC but I cannot find it. I've tried downloading it from here but it says No and to quit.
My RAW files have the .DNG extension if that makes a difference.
So, am I missing Camera Raw and if so, how can I get it :?:
Thanks

You can download the latest update of ACR for your software version here....
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
After you click on the version you want it will take you to a page with installation instructions.

File size different in Bridge CS3 and Photoshop

Similar Messages

Maybe you are looking for