File size increase-Document size increase

Why after working a raw file and saving as a tiff does it open 500 by 350 inch document size?

Whoa! That's low all right. It's anyone's guess as to when that was set. It could very well have been that the resolution setting was inadvertently reduced when scrolling with the mouse, or ....
Ken

Similar Messages

Reducing pixel dimensions increases document size.

In photoshop cs6. Working on an image of 15000x18662 pixels, with about 100+ layers. doc size 800mb/6.43GB. To optimize speed, I reduced the file size to the absolute minimum I need which is 13200x16423. However now the file size grew bigger 620.2M/6.45GB. Some layers extend beyond the visible image area, so I cropped the image "deleting cropped pixels" , but this increased the image even further to 6.50GB. What's going on here?
Why is the file size increasing when I decrease pixel size?
Why would deleting cropped pixels increase file size?

This is a user to user Forum.
If no one who has bothered to read the original post considers it of enough interest to investigate or advise that is up to them.
Can you provide the original image?
Depending on the interpolation settings on the content downsampling might result in a lessened effect of the applied compression.
You seem to give the approximated values from "Document Sizes" in the status bar – what is the actual file’s size?
Quote from the Reference:
Document Sizes Displays information on the amount of data in the image. The number on the left represents the printing size of the image
—approximately the size of the saved, flattened file in Adobe Photoshop format. The number on the right indicates the file’s approximate
size including layers and channels.

Can't open the Illustration. There is not enough room for the window; increase document size

I keep getting this warning all of a sudden when I try to open any file. CS6 on a Windows machine. Dell Studio 17 that normally screams on any program. Please help asap. thanks

No one has heard of this?

How to increase page size for balance file upload in Workspace.

Hi All,
Please suggest how to increase page size for balance file upload in shared Workspace pages.
Thanks,

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

How to increase the size of the fonts for file, bookmarks and all toolbars in firefox 4.01

how can i increase the size of the fonts such as file, bookmarks,tools,etc and all toolbars

Try this extension:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

How to increase page size in existing document and add margins uniformly.

I have a long document that I must print out to PDF, but I must now increase the page size. I do not want to change the text at all; just increase the sizes of the margins. When I increase the page size , my text frame remains the original distance from left-hand margin. In other words, the top and bottom margins increase evenly, but for the left and right margins, only the right margin grows. This leaves the text frame shoved over to the left-hand side of the page (or towards the binding in a two-page spread).
I would like for the page size to increase so that all margins increase in a uniform manner, that is, so that the text frame remains centered in the page, both horizontally and vertically. At present it is centered only vertically.
Thanks very much.

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

How to increase the size of Redo log files?

Hi All,
I have 10g R2 RAC on RHEL. As of now, i have 3 redo log files of 50MB size. i have used redo log size advisor by setting fast_start_mttr_target=1800 to check the optimal size of the redologs, it is showing 400MB. Now, i want to increase the size of redo log files. how to increase it?
If we are supposed to do it on production, how to do?
I found the following in one of the article....
"The size of the redo log files can influence performance, because the behavior of the database writer and archiver processes depend on the redo log sizes. Generally, larger redo log files provide better performance, however it must balanced out with the expected recovery time.Undersized log files increase checkpoint activity and increase CPU usage."
I did not understand the the point however it must balanced out with the expected recovery time in the above given paragraph.
Can anybody help me?
Thanks,
Praveen.

You dont have to shutdown the database before dropping redo log group but make sure you have atleast two other redo log groups. Also note that you cannot drop active redo log group.
Here is nice link,
http://www.idevelopment.info/data/Oracle/DBA_tips/Database_Administration/DBA_34.shtml
And make sure you test this in test database first. Production should be touched only after you are really comfortable with this procedure.

Upgrade to v9 and increase in size file problem

We used your product, "Adobe connect" v.7 and recently decided to update it by 9th version of this software. But significant increasing in size of offline files is a major problem of that product compared to its old version. For instance, the size of 2 hours offline files in v.7 is 130 Mb but in the latter version is 400 Mb. Is there a solution to overcome this problem?

I know there was some work done in 9.1 to improve the quality of offlined recordings....but before I go into that, I'd like to ask a question. When you take your recording offline in 9, there are now two options, make MP4 and FLV. Which of these two formats are you using?
Thanks!

CAP2 Increase the size of cap files

Why the new version increase de size of captivate file in 100
mb? (*.cp (1)
= 23 mb / *.cp (2) = 128 mb
I unmarked the options: Publish Adobe...metadata and 508
compliance.
Thanks
[ ]'s
Renato

Thanks a lot.
[ ]'s
Renato
"CatBandit" <[email protected]> escreveu na mensagem
news:ehjeq5$19g$[email protected]..
> Yes, Renato, there is a way to recognize the unused
files.
(1)
> With
> any slide open in "EDIT" mode, click the View menu, and
select "Show
> Library"
> (if it isn't already displayed).
(2) Look at the Library column
> (you
> might have to scroll horizontally) and find the "USE
COUNT" column. The
> numbers displayed are how many time that item is used in
the project.
>
> Hope this helps.
> .
>

Online Increasing the Size of Ext3 File System (no lvm)

Using Suse linux entreprise Server SP1
Using multpath disks
using a ext3 file system mounted on a partition
How to increase the size of f Ext3 (no lvm) online without umounting the File system ?
a use

On 20/02/2012 10:56, smain09 wrote:
> Using Suse linux entreprise Server SP1
> Using multpath disks
> using a ext3 file system mounted on a partition
> How to increase the size of f Ext3 (no lvm) online without umounting
> the File system ?
> a use
This forum is for queries relating to Novell's Storage Manager product[1].
Storage-related queries for SUSE Linux Enterprise Server should be
posted in the SLES Configure-Administer forum. This recently moved from
forums.novell.com and can now be found @
http://forums.suse.com/forumdisplay....ure-Administer
HTH.
[1] http://www.novell.com/products/storagemanager/
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Can I increase swap size by just adding a swap file for permanent?

Hello,
I am doing installation of oracle 11gR2 database on Linux.
the swap area size is not enough. so can't go thought OUI's pre-system check before installation.
the system administrator says, he really feel hard to find out any free uppartitioned disk space for adding more to current swap.
he wants me to see if he can add a swap file (rather than an entire device/partition) for swap space.
I checked docs:
How to Create a Swap Device on Enterprise Linux [ID 432991.1]
it says,
"If no free, unpartitioned disk space exists, a swap file (rather than an entire device/partition) can be used for swap space as a *temporary*"
but why temporary? why not permanent (I don't want to have trouble in future) is there anyone can help me to confirm?
Thank you very much in advance.

995137 wrote:
HI Osama,
thank you for answering.
To my understanding, there should be no harm for database in future, f we increase swap size by adding a swap file, right?
many thanks !!!Right!
add another swap file

Converting PPT to Captivate File Size - why is is increasing?

I have Captivate 7 - 64 bit. I am trying to convert several .pptx presentations. Each presentation is around 60 MB. Strangely, though, when I convert them, they are increasing in size to 320 MB or thereabouts. A few months back we did this same thing with a 70 mb presentation and it only increased by 20 MB. Any ideas on why this would be or how to keep it smaller? I still have to input audio and that is going to make this file huge!
Thanks in advance,
Arthur

Hi there
Are you using the option for "High Fidelity"? I suppose that might account for it. Additionally, what about animations? If you have animations, perhaps that also accounts for it.
If you really want to ensure the file size is as small as possible, you might consider using what I call "The Camtasia Approach" for PowerPoint. You essentially launch the PowerPoint in presentation mode, then record it using Captivate. Just as you might record another application.
Cheers... Rick

AAC audio file increase in size when imported into DVD Studio Pro

Hello all!
I just encountered a very unique issue with the DVD Studio Pro. I used the compressor to export my video as an MPEG2 file and my audio as AAC file. After the compression my audio file had an .mpg4 extention and was about 160MB in size. When I imported it into my DVD Studio Pro project, however, the audio increased in size to 1.2 GB. I tried so many different compressions, but the problem really is (I think) that the file bumps up in size once imported into DVD SP project. Is there anything in preferences that I need to adjust or change? Please help!
Thank you.

Hi
I'm a little lost now with versions history, but if you have A.Pack in your App folder, then must use it. Check this tutorial: Encoding AC3 with A.Pack.
Compressor 2 and 3 has AC3 encoding inside the main application.
Alberto

Increasing canvas size and re-clipping (intentionally)

Hi,
So I bolluxed up a little bit while creating my first full-bleed print piece. I used Ps to edit the image, Ai to add some stuff, and ignored Id completely for the printer. Now I have a perfect 8.5 x 11 image that I want to print all the way to the edges without scaling; I left white bleeds 1.8" but apparently that won't suffice.
I'm trying to go back into photoshop and increase the canvas size (8.75 x 11.25 to include bleeds), and with it, extend the image that was originally clipped when I trimmed the document from a vertical picture (12 x 16 or whatever) to fit the standard letter paper size. When I do that, I get only white areas around the canvas.
Can anyone provide a solution to create full-color bleeds the way they should have been done originally? I have tried changing the canvas size and re-placing another layer of the image behind the existing one (with the hopes that it would clip automatically), but it didn't work. At this point, should I worry about bringing anything into InDesign?
Thanks,
- boda

The Nish Adeel,
> i wants to increase my fla canvas size from all sides...
when we
> increase the size of a file it increases from right and
bottom , i
> want to make it from all four sides like photoshop ...
is there any
> way to do this.
There is a way to do this; unfortunately, it's not an
automatic feature
like in Photoshop. The approach you'll need to take is to
update the
document dimensions (basically, the canvas size) as desired,
then use the
Edit Multiple Frames button on the lower left of the Timeline
panel to
manually move all assets on the main timeline. To do this,
you'll have to
make sure all layers are unlocked. To do this quickly, click
the
Lock/Unlock All Layers button at the top, between the eye and
the square
buttons, until you see that all locks have been removed (one
or two clicks
will do it). In the Modify Onion Markers button next to the
Edit Multiple
Frames button, choose Onion All. Select Edit > Select All,
then use the
arrow buttons to move your assets.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Best way to increase image size for print

I have a jpeg of an image that I will have to increase roughly 140% for a final print size of 16"x20". I am creating the final design in InDesign, but am editing the image in Photoshop first. My question is what's the best way to increase the size of the jpeg first in Photoshop (I assume) so that when I bring it into InDesign it is maximized in terms of resolution but not so large that the file size prohibitive for sending.
I've already cropped the image, but haven't adjusted any of the sizes. The dimensions are currently: 3233 pixels x 2586 pixels, and 10.777 in x 8.62 in at 300 pixels per inch.
Do I bring it into InDesign this way or increase the document size first in Photoshop? I assume the latter.
If I increase the size in Photoshop, I assume I should resample the image. If I do, that increases the pixel dimensions and file size to over 82.4M. Is there a way to keep the 300 ppi resolution while reducing the file size?

Photoshop CC now has Preserve Details as well as Bicubic smoother for enlargements.
140% is not asking much for enlargements. Photoshop may suffice.
You mention 300 ppi. Is it really necessary? In the days of offset presses,that was the standard, but what is it for a photo inkjet or the printer you use? You may not need 300.
Personally when I enlarge, I like Photozoom Pro. I have it on my Mac and PC and find it better than stock enlargement in Photoshop. Of course it's $99-$199 depending if it's on sale.
Here's a bit more about digital enlargement in this Sydney Morning Herald article
http://www.smh.com.au/digital-life/cameras/how-to-enlarge-images-without-pixelation-201306 26-2ovts.html
Of course Photoshop is for preparing photos for print and the web, so you would want to finish your photos there before moving them to InDesign.
Trevor Dennis, Noel Carboni and many other professionals can give better answers on the subject of enlargement and printing so I hope they will post advice as well.
I can't answer the last one honestly, I've never prepared prints for room exhibit, so I can't say what works best.
Good luck. I hope you can get it sorted out.
Gene

File size increase-Document size increase

Similar Messages

Maybe you are looking for