File size limit on export doesn't.
I have an export option for a photo forum I post to, where the size limit is 200kb. I have set 200kb, 600x600 JPG as the export limits, and I routinely get files much bigger, memory-wise, than that, up to 260kb.
I can set the export dimension limit to 500x500, and still get files over 200kb. Today, after a file went to 260kb at 600x600, I set the dimension limit to 500x500, and the exported file size did not change: at 500x500, it was still a 260kb file. If I go through and tweak compression by hand, on every photo, or set a file size limit of 150kb, I can get under 200kb per file.
I've tried files where I set the limit from 200, to 190, to 180, to 170, and see no change in the exported file (still well over 200 in size), and then when I set it to 160 it jumps down to 150-160 in size. If the file was only 210kb on export with the 200kb limit, setting it to 180kb will generally get the file under 200kb.
Really, the file size limit does not do what it purports to do. It can clearly get the file below that size if I direct it by hand every time: I haven't specified anything that would artificially bulk the file up, like a quality setting that would be incompatible with the file size limit. It's free to compress the file as needed to meet the limit.
What I want it to do is meet the limit I set for it. I shouldn't have to dance around. I have this export setting for the express purpose of quickly producing under-200kb files, and I sort of expect Lightroom to manage it.
I've had this problem too, but it isn't the only one when creating small jpeg files from LR.
There is something seriously amiss in the export module. I also create a lot of 600 pixel wide/high files and not only are the file sizes far too high, but the quality is poor. I have two workarounds for this, both of which add a little time to the job, but make a big difference.
First is to export my files as full size jpegs (which I do anyway,) LR does a good job with these. Then get another programme to batch process these to give me the small sRGB files I also need!
Second is to use LR's web module and create a basic html site for a batch of images in a folder in a temp directory at the precise size I want. This has the advantage that I can add a watermark. Then just rename and move the folder containing the images from the web folder that has been created to where I want them, followed by deleting the rest of the web folder.
Working at low quality (38%) from the Export module gave me a file size for one image of 455KB. So then I told it to export at a max of 200KB, and it came out at 565KB. Using the web module with quality set at 70 gave a higher quality result and a file size of 105KB!
The problem seems to be worse on images where I've done quite a bit of work using local adjustments - rather as if they are actually performing these on the small jpeg and re-saving each time. Certainly something going very wrong - just like it was in LR2.x and I think it must be a logical error as presumably the web module uses the same library to create jpegs.
Similar Messages
-
Is there a file size limit when exporting PDF to Word using AcrobatXI?
We have a 500 page document, mostly text, to scan and convert.
I doubt there is a hard limit, but you may hit problems with particularly big files.
But I am concerned about the word "scan" here. Are these files not even PDF files yet? If so, no solution for going paper -> Word is likely to be improved by sticking "PDF" in the middle to get paper -> PDF -> Word. Involving PDF in the middle of any conversion process is more likely to be a mistake than not. -
Errors when using "Limit file size to" when exporting images
When I try to use the "limit file size to" option in Export, I often get at least one image that doesn't export, and I get a dialogie box like the image attached here:
As I am exporting in batches, it geats really messy and risky too!I have tried various file size options but that doesn't seem to be a factor.
Any ideas on solving this, or is it an unfixed Lr bug?!
thanks in advanceI can't reproduce it here, so you could try trashing the preferences file http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1148/198/how-do-i- delete-the-lightroom-preferences-file
If that doesn't do the trick, post it on the Official Feature Request/Bug Report Forum -
FILE and FTP Adapter file size limit
Hi,
Oracle SOA Suite ESB related:
I see that there is a file size limit of 7MB for transferring using File and FTP adapter and that debatching can be used to overcome this issue. Also see that debatching can be done only for strucutred files.
1) What can be done to transfer unstructured files larger than 7MB from one server to the other using FTP adapter?
2) For structured files, could someone help me in debatching a file with the following structure.
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_2
300|Line_id_2|1234|Location_ID_2
400|Location_ID_2|1234|Dist_ID_2
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_N
300|Line_id_N|1234|Location_ID_N
400|Location_ID_N|1234|Dist_ID_N
999|SSS|1234|88|158
I would need a the complete data in a single file at the destination for each file in the source. If there are as many number of files as the number of batches at the destination, I would need the file output file structure be as follows:
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
999|SSS|1234|88|158
Thanks in advance,
RV
Edited by: user10236075 on May 25, 2009 4:12 PM
Edited by: user10236075 on May 25, 2009 4:14 PMOk Here are the steps
1. Create an inbound file adapter as you normally would. The schema is opaque, set the polling as required.
2. Create an outbound file adapter as you normally would, it doesn't really matter what xsd you use as you will modify the wsdl manually.
3. Create a xsd that will read your file. This would typically be the xsd you would use for the inbound adapter. I call this address-csv.xsd.
4. Create a xsd that is the desired output. This would typically be the xsd you would use for the outbound adapter. I have called this address-fixed-length.xsd. So I want to map csv to fixed length format.
5. Create the xslt that will map between the 2 xsd. Do this in JDev, select the BPEL project, right-click -> New -> General -> XSL Map
6. Edit the outbound file partner link wsdl, the the jca operations as the doc specifies, this is my example.
<jca:binding />
<operation name="MoveWithXlate">
<jca:operation
InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
SourcePhysicalDirectory="foo1"
SourceFileName="bar1"
TargetPhysicalDirectory="C:\JDevOOW\jdev\FileIoOperationApps\MoveHugeFileWithXlate\out"
TargetFileName="purchase_fixed.txt"
SourceSchema="address-csv.xsd"
SourceSchemaRoot ="Root-Element"
SourceType="native"
TargetSchema="address-fixedLength.xsd"
TargetSchemaRoot ="Root-Element"
TargetType="native"
Xsl="addr1Toaddr2.xsl"
Type="MOVE">
</jca:operation> 7. Edit the outbound header to look as follows
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
<element name="OutboundFileHeaderType">
<complexType>
<sequence>
<element name="fileName" type="string"/>
<element name="sourceDirectory" type="string"/>
<element name="sourceFileName" type="string"/>
<element name="targetDirectory" type="string"/>
<element name="targetFileName" type="string"/>
</sequence>
</complexType>
</element>
</schema>
</types> 8. the last trick is to have an assign between the inbound header to the outbound header partner link that copies the headers. You only need to copy the sourceDirectory and SourceGileName
<assign name="Assign_Headers">
<copy>
<from variable="inboundHeader" part="inboundHeader"
query="/ns2:InboundFileHeaderType/ns2:fileName"/>
<to variable="outboundHeader" part="outboundHeader"
query="/ns2:OutboundFileHeaderType/ns2:sourceFileName"/>
</copy>
<copy>
<from variable="inboundHeader" part="inboundHeader"
query="/ns2:InboundFileHeaderType/ns2:directory"/>
<to variable="outboundHeader" part="outboundHeader"
query="/ns2:OutboundFileHeaderType/ns2:sourceDirectory"/>
</copy>
</assign>you should be good to go. If you just want pass through then you don't need the native format set to opaque, with no XSLT
cheers
James -
Is there a size limit to exporting PDF to Word?
Is there a size limit when exporting PDF to Word format? I keep getting time out errors for files exceeding 100 MB
Hi riversideredhead63,
100 MB is indeed the file size limit for uploading files to cloud.acrobat.com. Have you tried optimizing the PDF files in Acrobat to reduce their file size?
Best,
Sara -
Maxl Error during data load - file size limit?
<p>Does anyone know if there is a file size limit while importingdata into an ASO cube via Maxl. I have tried to execute:</p><p> </p><p>Import Database TST_ASO.J_ASO_DB data</p><p>using server test data file '/XX/xXX/XXX.txt'</p><p>using server rules_file '/XXX/XXX/XXX.rul'</p><p>to load_buffer with buffer_id 1</p><p>on error write to '/XXX.log';</p><p> </p><p>It errors out after about 10 minutes and gives "unexpectedEssbase error 1130610' The file is about 1.5 gigs of data. The filelocation is right. I have tried the same code with a smaller fileand it works. Do I need to increase my cache or anything? I alsogot "DATAERRORLIMIT' reached and I can not find the log filefor this...? Thanks!</p>
Have you looked in the data error log to see what kind of errors you are getting. The odds are high that you are trying to load data into calculated memebers (or upper level memebers) resulting in errors. It is most likely the former. <BR><BR>you specify the error file with the <BR><BR>on error write to '/XXX.log'; <BR><BR>statement. Have you looked for this file to find why you are getting errors? Do yourself a favor, load the smaller file and look for the error file to see what kind of an error you are getting. It is possible that you error file is larger than your load file, since multiple errors on a single load item may result in a restatement of the entire load line for each error.<BR><BR>This is a starting point for your exploration into the problem. <BR><BR>DATAERRORLIMIT is set at the config file, default at 1000, max at 65000.<BR><BR>NOMSGLOGGINGONDATAERRORLIMIT if set to true, just stops logging and continues the load when the data error limit is reached. I'd advise using this only in atest environement since it doesn't solve the initial problem of data errors.<BR><BR>Probably what you'll have to do is ignore some of the columns in the data load that load into calculated fields. If you have some upper level memebers, you could put them in skip loading condition. <BR><BR>let us know what works for you.
-
LabView RT FTP file size limit
I have created a few very large AVI video clips on my PXIe-8135RT (LabView RT 2014). When i try to download these from the controller's drive to a host laptop (Windows 7) with FileZilla, the transfer stops at 1GB (The file size is actually 10GB).
What's going on? The file appears to be created correctly and I can even use AVI2 Open and AVI2 Get Info to see that the video file contains the frames I stored. Reading up about LVRT, there is nothing but older information which claim the file size limit is 4GB, yet the file was created at 10GB using the AVI2 VIs.
Thanks,
RobertAs usual, the answer was staring me right in the face. FileZilla was reporting the size in an odd manner and the file was actually 1GB. The vi I used was failing. After fixing it, it failed at 2GB with error -1074395965 (AVI max file size reached).
-
How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?
You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.
-
S1000 Data file size limit is reached in statement
I am new to Java and was given the task to trouble shoot a java application that was written a few years ago and no longer supported. The java application creates database files the user's directory: diwdb.properties, diwdb.data, diwdb.lproperties, diwdb.script. The purpose of the application is to open a zip file and insert the files into a table in the database.
The values that are populated in the diwdb.properties file are as follows:
#HSQL Database Engine
#Wed Jan 30 08:55:05 GMT 2013
hsqldb.script_format=0
runtime.gc_interval=0
sql.enforce_strict_size=false
hsqldb.cache_size_scale=8
readonly=false
hsqldb.nio_data_file=true
hsqldb.cache_scale=14
version=1.8.0
hsqldb.default_table_type=memory
hsqldb.cache_file_scale=1
hsqldb.log_size=200
modified=yes
hsqldb.cache_version=1.7.0
hsqldb.original_version=1.8.0
hsqldb.compatible_version=1.8.0
Once the databsae file gets to 2GB it brings up the error meessage 'S1000 Data file size limit is reached in statement (Insert into <tablename>......
From searching on the itnernet it appeared that the parameter hsqldb.cache_file_scale needed to be increased & 8 was a suggested value.
I have the distribution files (.jar & .jnlp) that are used to run the application. And I have a source directory that was found that contains java files. But I do not see any properties files to set any parameters. I was able to load both directories into NetBeans but really don't know if the files can be rebuilt for distribution as I'm not clear on what I'm doing and NetBeans shows errors in some of the directories.
I have also tried to add parameters to the startup url: http://uknt117.uk.infores.com/DIW/DIW.jnlp?hsqldb.large_data=true?hsqldb.cache_file_scale=8 but that does not affect the application.
I have been struggling with this for quite some time. Would greatly appreciate any assistance to help resolve this.
Thanks!Thanks! But where would I run the sql statement. When anyone launches the application it creates the database files in their user directory. How would I connect to the database after that to execute the statement?
I see the create table statements in the files I have pulled into NetBeans in both the source folder and the distribution folder. Could I add the statement there before the table is created in the jar file in the distribution folder and then re-compile it for distribution? OR would I need to add it to the file in source directory and recompile those to create a new distribution?
Thanks! -
4GB File Size Limit in Finder for Windows/Samba Shares?
I am unable to copy a 4.75GB video file from my Mac Pro to a network drive with XFS file system using the Finder. Files under 4GB can be dragged and dropped without problems. The drag and drop method produces an "unexepcted error" (code 0) message.
I went into Terminal and used the cp command to successfully copy the 4.75GB file to the NAS drive, so obviously there's a 4GB file size limit that Finder is opposing?
I was also able to use Quicktime and save a copy of the file to the network drive, so applications have no problem, either.
XFS file system supports terabyte size files, so this shouldn't be a problem on the receiving end, and it's not, as the terminal copy worked.
Why would they do that? Is there a setting I can use to override this? Google searching found some flags to use with the mount command in Linux terminal to work around this, but I'd rather just be able to use the GUI in OS X (10.5.1) - I mean, that's why we like Macs, right?I have frequently worked with 8 to 10 gigabyte capture files in both OS9 and OS X so any limit does not seem to be in QT or in the Player. 2 GIg limits would perhaps be something left over from pre-OS 9 versions of your software, as there was a general 2 gig limit in those earlier versions of the operating system. I have also seen people refer to 2 gig limits in QT for Windows but never in OS 9 or later MacOS.
-
Is there a Maximum file size limit when combining pdf files
I am trying to combine files 8 PDF files created with i Explore using Acrobat XI Standard, the process is completed but when opening the file not all 8 individual files have been combined only the first two have been combined, the process shows all eight being read and combined.
I can open and view each of the original 8 individual files and read the content without any issue, the largest of the eight files is 15,559kb and the smallest is 9,435kb
if anyone can assist that would be most appreciatedHi Tayls450,
This should not have happened as there is no maximum file size limit when combining PDFs.
Please let me know if there are some password protected PDFs also?
Also, I would suggest you to choose 'Repair Acrobat Installation' option from the Help menu.
Regards,
Anubha -
In the past their were file size limits for folios and folio resources. I believe folios and their resources could not go over 100MB.
Is their a file size limit to a folio and its resources? What is the limit?
What happens if the limit is exceeded?
DaveArticle size is currently capped at 2GB. We've seen individual articles of up to 750MB in size but as mentioned previously you do start bumping into timeout issues uploading content of that size. We're currently looking at implementing a maximum article size based on the practical limitations of upload and download times and timeout values being hit.
This check will be applied at article creation time and you will not be allowed to create articles larger than our maximum size. Please note that we are working on architecture changes that will allow the creation of larger content but that will take some time to implement.
Currently to get the best performance you should have all your content on your local machine (Not on a network drive), shut down any extra applications, get the fastest machine you can, with the most memory. The size of article is direclty proportional to the speed at which you can bundle an article and get it uploaded to the server. -
WebUtil File Transfer - file size limit
Does anybody know what the file size limit is if I want to transfer it from the client to the application server using WebUtil? The fileupload bean had a limit of 4 Mb.
Anton WeindlWebutil is only supported for 10g. THe following is added to the release notes:
When using Oracle Forms Webutil File transfer function, you must take into consideration performance and resources issues. The current implementation is that the size of the Forms application server process will increase in correlation with the size of the file that is being transferred. This, of course, has minimum impact with file sizes of tens or hundreds of kilobytes. However, transfers of tens or hundreds of megabytes will impact the server side process. This is currently tracked in bug 3151489.
Note that current testing up to 150MB has shown no specific limits for transfers between the database and the client using WebUtil. Testing file transfers from the client to the application server has shown no specific limit up to 400Mb; however, a limit of 23Mb has been identified for application server to client file transfers. -
Hello, everyone !
I know, that Oracle Lite 5.x.x had a database file size limit = 4M per a db file. There is a statement in the Oracle® Database Lite 10g Release Notes, that db file size limit is 4Gb, but it is "... affected by the operating system. Maximum file size allowed by the operating system". Our company uses Oracle Lite on Windows XP operating system. XP allows file size more than 4Gb. So the question is - can the 10g Lite db file size exceed 4Gb limit ?
Regards,
Sergey MalykhinI don't know how Oracle Lite behave on PocketPC, 'cause we use it on Win32 platform. But ubder Windows, actually when .odb file reaches the max available size, the Lite database driver reports about I/O error ... after the next write operation (sorry, I just don't remember exact error message number).
Sorry, I'm not sure what do you mean by "configure the situation" in this case ... -
TFS Preview source control file size limit
Is there a file size limit for adding large files to a TFS Preview project's source control..? I would like to add some files to source control that are in the 20-30Mb range and the requests keep aborting.
Hi Erich,
Thank you for your post.
I test the issue by adding .zip file to TFS Azure version comtrol, the size include 10MB, 20MB, 100MB, 2GB, i can add they to version control properly without any problem.
In order narrow down the issue, here are some situations i want to clarify from you:
1. What's the error message when TFS azure block the check-in process? Could you share a screen shot?
2. Which client tool are you using? VS10 or VS11? Or other tools?
3. Try to reproduce this in different network environment and see what will happen.
4. Capture a fiddler trace which can help to check the issue.
Thanks,
Lily Wu [MSFT]
MSDN Community Support | Feedback to us
Maybe you are looking for
-
Creating Transfer Order for a Material document
Hi, I am transferring the Unrestricted stock from one material to another material through Movement type 309. I am creating a material document through BAPI_GOODSMVT_CREATE. Once the Material document is created and if the stock is in multiple storag
-
Hi All, Tried upgrading our UCCX 9.0(2) SU1 HA deployment to 10.5(1) last night and it failed with the following message - There is not enough disk space in the common partition to perform the upgrade. Please use either the Platform Command Line Inte
-
– I have the most recent version of Firefox. – I have my settings in Preferences -> Privacy on "Keep third party cookies until I close Firefox". – I've checked "Clear history when Firefox closes" and have ticked every single box under settings (excep
-
Regarding calculated item in pivot view in obiee11g
Hi All, i am using two pivot view in my report. i am using calculated item for first pivot view. but it is also applying in second pivot view. i want it to apply only at view level but it is applying at report level. please help me to find the soluti
-
CD and DVD ejected ;-((
Hi to everyone after 2 months of working, the combo drive ejects every cd or dvd i but in... Bad thing! Now mibook went to the doctor for canging the drive; i hope they put in another one, wich works longer and better... Some body knows if this probl