File size limitation to import into imove

I can't import a movie into imove that is 999 mb. Does this application have a file size limitation. The file is saved as a *.m4v. Thanks for your help using imovie 09.

EyeTV should have an iMovie 09 Preset. That should make sure there are no extra tracks included.
Another way to get files out of EyeTV3...
Get MPEG Streamclip, which is free.
IN EyeTV 3, right click on the recording, and Reveal in Finder
Right click on the .eyeTV file in the finder and SHOW PACKAGE CONTENTS
Drag the .mpg file into MPEG Streamclip.
FILE/EXPORT TO QUICKTIME from MPEG Streamclip, choosing Apple Intermediate Codec.
Import this AIC file, which will be in a .mov container, into iMovie.
Note: You may need the Apple QuickTime MPEG2 Playback Component for this to work. MPEG Streamclip will tell you if you do. It costs $20 from Apple.
Message was edited by: AppleMan1958

Similar Messages

Is an 8.7GB file too big to import into iMovie 9?

Is an 8.7GB file too big to import into iMovie 9? I am using iMovie 8.0.6 on a Macbook Pro running OS 10.6.8 on 2.26 GHz Intel Core 2 Duo with 2 GB Memory. I can't get my movie file to import into iMovie...any advice would be much appreciated!

When you import into iMovie, your video is converted into DV format. This uses 13 GB per hour of video. So the first thing you have to do is make sure you have 26 GB free on your hard drive, plus another 10GB free for OSX to perform, plus 10GB free if you plan on burning a DVD.
iMovie has non-destructive editing. If you have used any part of a clip and discard the rest, that entire clip is still saved in your project - unused but eating up disc space. If you use no part of a clip and discard the clip, then the clip can go in the trash and you get back disc space. So...
If you import 2 hours of video (26GB) as one clip, and only use 2 minutes, your 2-minute segment retains its 2-hr source in memory. 2 min = 26 GB.
One thing you can do is set the iMovie preferences to automatically create new clips every 3 minutes. (2 hours of 3-min clips = 40 clips.) This allows you to find the 2-minute segment you want and delete all of the unused clips. Say your 2-minute segment comes from 2 of these 3-min clips, so you keep 6 minutes of source footage and delete the rest. Clips that are entirely unused will be completely deleted and give you back disc space. At .65 GB per clip, your 6-minute project is now only 1.3 GB, and you've just regained 24.7 GB of disc space.

Saving files from Photoshop to Import into iMovie 09

1. What is the best file format for saving images from Photoshop to bring into iMovie 09?
2. What should the image size of the file be set to from Photoshop? I would like the best quality while working in iMovie prior to exporting and compressing after I am done editing.
Thank you in advance.

kat.hayes wrote:
1. What is the best file format for saving images from Photoshop to bring into iMovie 09?
I see you have not marked your topic "Answered", so you may be hoping for some other suggestions. If your item 1 is intended to ask about file "type" (.psd, .jpg, .png, .tif, etc.), here is my suggestion.
Because of the large file size of PhotoShop (PS) .psd image files, *unless you need to keep the PS version with Layers, Adjustments, etc*., _and unless you do NOT keep a separate folder of PS images_, I suggest that you NOT save the PS .psd file "format" (type) into iPhoto (or iMovie.)
I keep all PS (.psd) image files that I want to retain in separate folders outside iPhoto. I also save the finished (PS) image as a .jpg or .png version which I import into iPhoto for easy import into iMovie via the media browser. Whether to use jpeg or png depends on the image quality I need.
If you are capturing the snapshots that you are editing with PS from an iSight, other webcam, or a Flip camcorder, the jpg version will probably give you all the quality you need. However, to make your decision easier, you can save multiple file type (and compression settings) versions of the edited file when you are finished in PS. Then import all the various jpgs, pngs, tiffs, etc, into a test movie, lable (title) them for easy identification, save the movie, and see if you can tell any difference in quality or each image when you replay your test movie. If you can tell a difference, you can decide how much quality you need and match that need with the file type and size that gives the necessary quality level. If you cannot see a difference in the move regardless of which file type or compression level, you can save space by using the smallest image file.
+re: your item 2:+ I have nothing to add to Karsten's expert comments on resolution and file size.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.8) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Movie files suddenly don't import into iMovie

I have been importing dozens of MVI_ .MOV files shot on a Canon 60D and store on my iMac into iMovie no problem. Now after two months when I choose import movie and select the same files a box comes up saying the file (approx1 GB files) is processing and it will take less than a minute but the box disappears after 10 secs or so and no file is imported into iMovie. How can I fix this problem that has developed. I've tried with several different files and restarted iMac.

Hi John - welcome to the forum!
Here's some light reading on the subject!:
iMovie Cannot See or Control Camera:
http://docs.info.apple.com/article.html?artnum=43000
http://www.versiontracker.com/dyn/moreinfo/vt3/10228
http://discussions.apple.com/thread.jspa?forumID=858&threadID=231694
Useful tip to ‘kick-start’ the connection:
http://discussions.apple.com/thread.jspa?threadID=463729&tstart=0
esp. see Beverly’s work-around
The above problem with ref. to QuickTime Versions:
http://discussions.apple.com/thread.jspa?threadID=263662&tstart=0
The ‘Garage-Band’ Fix:
I quote QuickTimeKirk:
”Open the Audio MIDI Setup application (Utilities folder).
Try changing the settings to 44100Hz (CD Quality) or to 48000Hz (typical of the iMovie formats).
Others call this the GarageBand fix. Opening GB also resets the Audio MIDI Setup.”
This has a good list of ‘fixes’ – from Bengt:
http://discussions.apple.com/thread.jspa?threadID=397899&tstart=0
G5 Dual 2.0 ghz Mac OS X (10.4.9) 1.5 GB RAM; VidCam: Sony DCR TRV80E

File size limitation while importing from camera?

I just installed QuickTime 7 Pro and tried to import a movie from my video camera (mini DV).
It worked ok until it stopped with the pop up message like "file too large". That happened after 35 min of recording and 7.8 GB file size.
Is there really a limitation in file size?
thanks for feedback

Th DV quality is not as good as mp4 would be but it is a nice alternative.
If miniDV camcorder is recording in standard DV, then the Vidi captured quality should be the same as your source file on the camcorder. If camcorder is recoding in HDV and down-converting to DV for Vidi capture, then display dimensions would be reduce drastically. (In this case, you should capture the content using iMovie which will convert the HDV content to AIC while retaining the original dimensions and converting the audio to QT compatible audio.) The main difference between MPEG-4 and Device Native capture by QT 7 Pro is that the camcorder's DV content is transcoded to the MPEG-4 OR MPEG-4/AVC (H.264) compression format making the file much smaller. DV is an "editing" compression format while MPEG-4 is a "delivery" compression format. You can edit the DV files in QT 7 Pro or any other Apple or third-party video editor and then convert them to any QT compatible compression format for which your system is configured.

What movie file formats can be imported into iMovie?

Can you directly import .avi, mpeg or .mov files? What about a Quicktime movie file? Just trying to figure out which file format iMovie will accept. I have a movie that was edited on Adobe Premiere and want to make sure I export the movie in the correct format.
Thanks.

read Jon's reply in this thread ..
https://discussions.apple.com/thread/1891778?start=0&tstart=0
keep in mind: avi nor mov are 'formats', just media wrappers = box of chocolate, you'lll never know ...
stay within normal video standards, such as 1080i or 720p, 25/29.97fps ... mov encoded with h264 should be fine.
and avoid fancy stuff such as surround, Dolby 5.1., 3D ........

Maximum File Size of .dv Import File to Premiere Pro CS5?

Hello Community:
I searched this forum and Google in general, but could not find an absolute limit on the media file size I can import into a Premiere Pro CS5 project. I'm scheduled to process the ".DV" recording from a conference, which could go on for hours. I have asked the camera man to break up the recording in one-hour segments, but I'm getting some push-back.
Is there a specific size limitation on importing an NTFS file structure .dv file in Premiere Pro CS5?
Thanks,
Rich Locus

Same issue. I previously used NeoScene to convert .mov files from a Canon 5d mark ii to the easier to edit with Gopro Cineform .avi format in Premiere Pro CC. They used to work fine but now Premiere only recognizes a very small part of the file. The first 18 seconds of an 8 minute file.
I tried importing the file to a new clean scene and the problem remained.
I need to be able to work with this footage. Somehow Premiere is no longer able to properly read clips it used to be able to read.
I would like to hear something from Adobe on this issue.
EDIT: I just updated my GoPro software to 2.0 and the problem was instantly solved. The same might apply to TechSmith.
EDIT 2: Upon rendering the edit I discovered that while the entire length of the clip was represented it in fact stopped playing new frames at the same frame as it had before. So no luck. Updating GoPro Cineform made the length of the file display correctly (7min) but did not actually let me play the file beyond the first 18 seconds - it just showed the same frame.
I deleted all preview files and cleaned Media Cache files (under media/preferences) - this didn't help.
Finally I made the file offline, closed Premiere, changed the file name and re-opened Premiere. Then I right clicked over the file in the Project window and chose replace file to re-connect. The file finally came in correctly. I've now rendered it and it runs through the entire 7 min.
Message was edited by: ereitz

Certain mp4 files are not importing into iMovie

I downloaded various files from the video page at a blog website [ http://www.911blogger.com/ ]; they're mp4 QuickTime. They won't properly import into iMovie, and quickly return a "An Unknown Error Has Occured" message box.
This is confusing, especially since iMovie can make mp4 movies. And since mp4 is a QuickTime format -- and QuickTime is made by Apple, who also makes iMovie.
It doesn't matter what size of file; none import. I asked the guys who own/operate the blog website if they put any special locking features on their video file downloads from their podcasts, and they said they (paraphrasing) "didn't do anything except use an iPod video converter" or something to that effect.
So, any idea's?

I have QuickTime 7.1.1 installed, with a license for QuickTime Pro.
QuickTime Pro shouldn't affect the ability to import to iMovie. All QuickTime Pro does is enable certain movie editing commands in QuickTime Player. It doesn't add any codecs or new elements to QuickTime.
But third-party QuickTime codecs could certainly be affecting iMovie 6's ability to import a movie. If any are installed, they should be temporarily removed and the Mac restarted.
They are discussed here:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
Karl

Converting files to import into iMovie HD

I've been searching the forum but cant find anything that helps me...
I have an mpeg (a .m2p file)
I've tried converting it into all sorts of things to import into iMovie, using the likes of "ffmpegx" and "mpeg streamclip".
I've tried converting to mpeg4 mov files, mpeg4 mp4 files, H264, .DV.
Most of the time even quicktime will not play them, or in the case of the .DV files, not only is it massive (like 50 gig) but takes hours to import.
Basically I have a 2gig .m2p (mpeg2) file and want to convert it into something that iMovie will read without taking 6 hours.
I'm new to OS X, and video editing/converting in general... someone please point me in the right direction.

.m2p file
Have you tried this with MPEG Streamclip (Notice that MPEG2 conversions require the $20 Apple MPEG-2 Playback Component):
"File/Export to DV.../Compression: DV (DV25)". Choose "Split DV stream in Segments" if the content is more than 9 minutes 27 seconds because iMovie 1-4 can't reliably handle longer clip files and it might be a good idea to limit the converted .dv file's size anyway (segmented clips play seamlessly in iMovie).
You can save the converted DV directly into iMovie project's Media folder to save time and HD space (iMovie prompts you what to do with the clip when the project is opened. Notice that iMovie HD 5 now stores its project folder as a package -- MPEG Streamclip can save straight into the package's /Media folder!)
http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG

Why do some AVI files not import into iMovie?

Some of my AVI video does not import into iMovie. When I try, it gives me a non-specific error message. Is there a way I can import it? Other AVI files import with no problem.

AVI is a container, not a format; the audio and video in an AVI may use any codec, and some codecs can't be used in Mac OS X. Installing Perian may help.
(34138)

Trouble opening mpeg movie files and importing into iMovie 08

Hi, I'd be most grateful if anyone could provide any solutions to the following problem...
A friend has emailed me two .mpeg movie files which are parts 1&2 of a home movie which I want to edit in iMovie and burn to DVD. The footage was shot on a miniHDV camcorder (not sure which brand).
Opening in QT 7.6 gives the following warning dialogue: "The movie could not be opened. The file is not a movie file."
The files will however play fine in VLC Media Player, but not in mpeg Streamclip (the file appears to play but the viewer is blank with no audio/video). Trying to import into iMovie is unsuccessful. The iMovie browser won't let me choose the files or drag/drop.
Any ideas. I read somewhere that iMovie 08 can't import mpeg-1 files. Do I need to convert the files, and if so how?
Thanks in advance, and apologies - this is my first experience of video editing.

I have QT Player but it hasn't "kicked in" when I try to import my videos.
Something called PIXE VRF Browser is supposed to help in the conversion. The QT MPEG-2 thingy won't install until I buy QT Pro, according to what I get on the screen.
Sounds like you have too many applications trying to do the same thing. Either use the Pixela Pixe VRF Browser or use the Mac applications (Mac OS Finder, Apple QT MPEG-2 Playback Component w/MPEG Streamclip) but not both to do the same job. The Apple Finder should be able to copy multiplexed VOB/MPEG-2 files from either your PC burned DVD or directly from your camcorder DVD to your MAC hard drive where MPEG Streamclip/QT MPEG-2 component can convert them for use in iMovie '08. Frankly, I don't understand your work work flow or why you want to import your files to a GOP editor in the first place if your goal is to do frame level editing in iMovie '08.
As for Jon's suggestion, I am on dial-up and cannot download big files at 3-4 Kbps snail pace.
What does this have to do with importing your camcorder files to your PC and re-burning them to DVD for use on your Mac? If I were to make a recommendation here, it would have been to use an external hard drive here rather than DVDs for transporting files between platforms and then only if you want the files available to both. If your goal is only to edit them in iMovie '08 or iMovie HD on your Mac, then why not cut out the "middleman" platform?
I wish I could purchase these updates on DVDs but the genies couldn't even tell me if there's such a service.
Totally confused here. Are you saying your DVR-D300 files were commercial produced or that you are dealing with torrent downloads of copy-written material? These are two separate issues with facets beyond the scope of this forum.
As for "platform", I have iMovie08. iMac does not read the mini RAM disks when I connect the camera to a USB port.
Are you saying the Finder doesn't read them or that iMovie '08 doesn't read them? Do you "finalize" your DVDs before trying to read them via USB as the manual states may be necessary as indicated on page 150 of your manual?
How can I find out that iMovie09 will let me import and edit my Panasonic videos?
You could try going to the Apple site and checking the the tapeless camcorder compatibility chart. The Panasonic DVR-D300 is specifically listed along with a hot link for additional information. However, this still won't help you you don't finalize the content.

Why doesn't my .AVi file import into iMovies

I cannot get iMovies to recognise my .AVI files (from my Samsung ST50).
I can download the files from my camera to my hard drive (so the computer recognises them), and I can play them via Quicktime, so I know they work. But I can't import the .AVI files into iMovies. It seems to process the video when I go to 'Import'>'Movies'...- then nothing appears. I just get a 'No Matching Video' message in the event folder.
However my previous camera (an old Pentax Optio S40) produced .AVI's which I can import into iMovies. Are all AVI's not the same? Or is it a setting in my new camera (I'm not too tech savvy!).

Hi Rocco,
Looks like we missed this post when you first asked. Sorry about that.
What message are you receiving when you try to print? What version of Windows do you have installed? If you're running Win7, you may be facing this issue: http://helpx.adobe.com/acrobat-com/kb/createpdf-desktop-printer-windows-7.html
-David

Movie file won't import into iMovie

I have a digital camera that records video (Nikon Coolpix L4). It saves videos as .mov files. When I try to import them into iMovie, it gives me an unknown error. I have tried converting the .mov files into another format using MPEG Streamclip, but that also reports an error.
Any suggestions? Is this fixable or does it have something to do with my camera, not my software?

Hi
iMovie 1 to 6 is for miniDV Cameras and connects only via FireWire.
All other material has to be concerted.
.mov - is no specific file type - just a container.
Has to be converted to streamingDV to be imported into iMovie 1 - 6.
If You try iMovie'08 it might be able to import.
Or use MPEG Streamclip. Why this doesn't work I can't figure.
May be You need to buy and install: Apple mpeg2 component - BUT NOT SURE at all.
Yours Bengt W

Screen Capture Video Loses Quality When Imported Into iMovie - WHY?

I am using screen capture software to make a video of my screen at 1024x768. The video is for a tutorial. I want to use iMove to get things like transitions and such into the movie, and to add text and audio. The problem is that, although the video looks great in QuickTime, it loses quality significanly when I import into iMove. The text on the screen is blurry, and the quality of everything else is terrible as well.
Is this s limitation of iMove? Can screen capture video be imported? Does it only work with DV?
Also, I tried to convert the file to many other formats, from QuickTime to MPEG-4, so it's not the file type.
If anyone can help me out, I've be very grateful.
Thanks!
iBook G4 Mac OS X (10.4.5)

Your dimensions are getting in the way. iMovie converts your 1024X768 to a DV Stream file that is 720X480.
One workaround would be to set your display resolution smaller. Try 800X600 (if your windows fit that size).
If you're using Snapz Pro you should set your window capture to 640X480. This size will import nicely into iMovie.
An even better way would be to do all of the work using QuickTime Pro. Again a 1024X768 QT.mov file would not fit on the most common display settings used. When you add the QT Player window the controller would be below the screen and not accessible for most users.
800X600 would make a better file (smaller, too). It would still be 4:3 aspect and would also import into iMovie.

Rotated movs not staying rotated after being imported into iMovie

Hi,
Used Quicktime to rotate some camera phone videos and saved them as .mov files.
They play fine but on importing to iMovie they have reverted to their unrotated state!
How annoying!?

Ouch!
QuickTime 7 has done away with the ability to freely rotate (or skew) video tracks and the link you've provided shows screen shots that do not appear in QT 7 Pro.
Version 7 allows rotation (90° increments) and "offset" (location of the track as a layer).
Since I don't own a camcorder I rarely run into this issue. Some people shoot in "Portrait" mode (turn the camera 90° and shoot) and then have issues importing to a DV app like iMovie. It wants to scale or squish of stretch your video capture to the DV dimensions (720x480).
So. What's a gal gonna do with portrait video?
QuickTime Pro 7 can fix it, too. Just not as easy as version 6 and with less visual "clues" as to what is happening while you edit.
QuickTime Pro can have up to 99 layers (tracks).
Make an image format file (.png if you need alpha channels) sized to the iMovie format size. NTSC is 720X480 pixels. The image will be all black (paint bucket tool) and saved as .png or even .pct. Don't use .jpg because it doesn't allow transparency and avoid .gif format because of the lack of colors.
Open this new 720X480 image using QT Pro. Select all (Command-A) and copy (Command-C). It's now stored on the Mac clipboard.
Open the video shot in portrait mode. Select all (Command-A) and choose "Add to Selection & Scale" from the Edit menu.
Not done just yet.
Open the Movie Properties window and single click on your video track (the real video track). Click the Visual Settings tab where you can adjust its "offset" and "scaled size". Adjust these settings to what works best for your video track size.
Switch back to the Player window and test. Adjust as needed until you're happy with the file and the position of your video track against this black background image. If you don't even see your video track you'll need to set its "layer" number lower than your black background image. Negative values can be entered.
All happy now? Are you sure?
Two options for this new file. Save As (self-contained) to make a QuickTime movie you could use in a Web page. Had you used a color other than black for the image this is where you could "blend" it into the background of your page.
Export. To DV Stream. This helps "lock" your file and it will rapidly import into iMovie where you can edit it further.
What about the added B/W .png file? It only acts like a placeholder to force your portrait movie be served in landscape format. I'll bet it isn't 20KB's in file size.
Hope this helps other users. Lots of steps but great results (when done correctly).

File size limitation to import into imove

Similar Messages

Maybe you are looking for