File Size Will Not Reduce

I am having an odd problem that I cannot resolve. In LR5 I chose about 15 images to Export as jpeg's onto my hard drive. Within the Export Dialogue Box I chose Resize To Fit and set it at 2.5 megapixels. 14 of the images resized correctly. One image, however, resized at 7 megapixels. Even when I went to the extreme of trying to export it using the Export Dialogue Box in LR5 to the size of 400 megapixels at it longest edge with the image quality at 39 (at 72 dpi) the image was still 5.9 megapixels in size!! So I opened it in Photoshop and tried downsizing it then saving it using the Image Size Dialogue Box (which indicated that the size was 310.5K), but when I look at the file info in the Finder Window (I use a MacPro) it says the files size is 5.7MB but the dimensions are only 400x265!! What is going on? Thanks in advance for your help.

Iam working on banner production, is their any better software/tools for SWF optimization/compression?
I got one SWF and FLA from other creative team, SWF size is below 50 KB look's better quality, I have changed some small amends, when i was exporting it from FLA... the SWF file weight goes to 90KB, i compressed image quality then, expoted again... the file size goes to 70KB. how can i do 50KB in better quality.
Thank you for your help!

Similar Messages

File size will not automatically refresh in a finder window

i'm not sure how long this has been going on, but i've noticed that when i save a file onto an external drive, the size listed will not update automatically and says "zero k". if i change the window view to thumbnails, or to columns, then back to file list, the size is then listed correctly.
does anyone have a fix for this so it will update automatically?
my permissions have all been verified ...
Dual 2 GHz PowerPC G5 Mac OS X (10.4.5)

Dear Bob,
I am having the same problem but your solution does not swork for me. I have 6 VPCs on my "host" PC and 5 of them are working normally but one has gone into shut down mode but will not shut down. Due to memory restirctions, I can only run 2 VPCs at a time
so this one is cutting that to one. I found I can hibernate it by using CTRL-ALT-DEL on the host and doing "End task" on the dodgy VPC, but it still says "Running" in the Virtual Machines folder and it will not let me delete the .vsv file for the dodgy VPC.
If I then rty to open it again, the window opens but with "Shutting down" showing and none of the VM menus work: shut down and restart both say "Cannot shut down this virtual machine"; tools / integration features runs but says it cannot start integration;
Ctrl+Alt+Del does nothing at all. Ideally, I would like to restart the VM to get a few settings from it and then shut it down and delete it (it is a failed development) but right now I would settle for anything that gets rid of it altogether! Any suggestions?
Why doesn't MS provide a way of forcefully shutting down a VM?

File size of Notes on iPod nano?

Hello,
my question is about the file size of notes to be handled by the iPod nano.
I have copied several ASCII text-files into the Notes folder of my iPod nano. Each has a size of approx. 20 kByte. Windows Explorer shows them in the iPod Notes folder with their original size.
However, when opening one of the text files on the iPod nano, text is only displayed until approx. 700 words (approx. 4000 characters), which corresponds to approx. 4 kByte. The larger rest of the file is not displayed, as if it was cut.
Is this an error?
Or is 4 kByte the max. size of text files which can be displayed as notes on the iPod nano?
I have updated the iPod nano firmware recently with release 1.1.
Thanks in advance for any help!

There is an online utility for doing this - will save you tons of time AND adds links so you go from one section of the larger file to the next:
http://www.ambience.sk/ipod-ebook-creator/ipod-book-notes-text-conversion.php
Until they inprove the file size that the iPods can read, this is your only real way to use your iPod as an ebook reader.
PC Windows XP Pro nunayobeezwax

How can I save a page offline? the "complete" option in "save as" produces a folder w/ 36 kb files that will not open.

the "complete" option in "save as" produces a folder w/ 36 kb files that will not open anything - can't I save the page as a single offline file?

This is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

Please help! My Itunes says corrupt file and will not open (IMac 2010). I couldn't fix it by reinstalling so I moved it to trash. It will not delete from my trash as it is saying "Japanese.lproj" is in use. I can't delete or open to close it, what do I do

Please help!
My Itunes says there is a corrupt file and will not open (IMac 2010). I couldn't fix it by reinstalling ITunes so I moved ITunes to trash. It will not delete from my trash as it is saying "Japanese.lproj" is in use. I have never opened or used "Japanese.lproj". I can't delete ITunes or open ITunes to close the Japanese.lproj, what do I do? Thank you for any help you can provide..

It will not delete from my trash as it is saying "Japanese.lproj" is in use. I have never opened or used "Japanese.lproj".
Interesting. This sort of thing is more common on Windows systems. Taken at face value, one of the iTunes program files (one of the Japanese language resources) is damaged.
I'd try running your Disk Utility over your startup disk. Does it find/repair any damage? If so can you empty your trash and reinstall your iTunes successfully now?

ORA-27046: file size is not a multiple of logical block size

Hi All,
Getting the below error while creating Control File after database restore. Permission and ownership of CONTROL.SQL file is 777 and ora<sid>:dba
ERROR -->
SQL> !pwd
/oracle/SID/sapreorg
SQL> @CONTROL.SQL
ORACLE instance started.
Total System Global Area 3539992576 bytes
Fixed Size                  2088096 bytes
Variable Size            1778385760 bytes
Database Buffers         1744830464 bytes
Redo Buffers               14688256 bytes
CREATE CONTROLFILE SET DATABASE "SID" RESETLOGS ARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/oracle/SID/sapdata5/p11_19/p11.data19.dbf'
ORA-27046: file size is not a multiple of logical block size
Additional information: 1
Additional information: 1895833576
Additional information: 8192
Checked in target system init<SID>.ora and found the parameter db_block_size is 8192. Also checked in source system init<SID>.ora and found the parameter db_block_size is also 8192.
/oracle/SID/102_64/dbs$ grep -i block initSID.ora
Kindly look into the issue.
Regards,
Soumya

Please chk the following things
1.SPfile corruption :
Startup the DB in nomount using pfile (ie init<sid>.ora) create spfile from pfile;restart the instance in nomount state
Then create the control file from the script.
2. Check Ulimit of the target server , the filesize parameter for ulimit shud be unlimited.
3. Has the db_block_size parameter been changed in init file by any chance.
Regards
Kausik

I am trying to clear files from my computer. I have a bunch of .m4v protected files that will not delete. They are lectures from college that I do not need anymore and would like to delete them to make room on my computer.

I am trying to clear files from my computer. I have a bunch of .m4v protected files that will not delete. They are lectures from college that I do not need anymore and would like to delete them to make room on my computer. I have looked at the help sites and they seem to give directions to change files that people are saving in the future and not regarding past files. I am unable to change anything about the file including the name, so I can not change these past files from .m4v to something else which is deletable such as .mp4 etc. Any help would be much appreciated!!!!

Well, most of what we can tell you is already stated in the message you are getting. A phone can only sync with one library at a time. You have apparently synced your phone with a different iTunes library in the past, or changes have been made to this library so the phone no longer recognizes it as the library with which it was synced. To know which you will have to provide the information.
If you bought them using the AppleID you use with this phone it may simply be easier to re-download them directly to the phone rather than sync them, though you will want to resolve that issue at some point.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

Hi, I'm helping StringSinger2 with this problem.
The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
SO...
When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
Many Thanks!

Double-click in Files panel will not open a file

Double-click in Files panel will not open a file. Instead
alert message appears (I will translate from Czech): "Design notes
are not allowed for this file. If you want to use Design notes...".
I do not want use Design notes, I want to open a file from File
Panel.
The same issue is when opening by right-click/Open. The only
(and unconfortable) way to open a file from Files panel is to
right-click/Open in program/Dreamweaver, this works.
Do you know why? help me, please, this disturbs me very much.
I have clean installation of up to date CS3 Design Premium
(Version 9.0 build 41) on WinXP SP2. Previous version of DW (v8)
worked fine in this way. Associations in system are set OK, I
think, because double-clicking in my file manager really opens for
examle PHP files in DW.

Also Drag & Drop from Files panel is not functioning.
Sometimes neither alert appears, simply nothing happen.
Note: I am trying usual files like PHP or HTML files, but
also others (PDF, CSS) with the same result - nothing
happens.

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

I have an alias file that will not delete or drag and it will not open to original file. How do I get these off my Mac?

I have an alias file that will not delete or drag and it will not open to original file. I have tried everything I know and they still wont delete. Can someone please help me?

Check out KB Article: http://support.apple.com/kb/ht1526 You can't empty the Trash or move a file to the Trash

Illustrator CS4 - frequently generates corrupt EPS files that will not parse

I have used many versions of Illustrator prior to and including the CS lines. I am currently running CS4 and this is the first time I have experienced this issue. Approximately half of my EPS formatted illustrator files will not parse. I use Quark Xpress 7 for my layout (never liked any of the Indesign programs). If I try to generate a PDF with my CS4 generated EPS files placed at least 60% of the time the placed file will corrupt the PDF export resulting in no PDF being generated.
Further to this PDF export issue, if I attempt to parse the same EPS file into Photoshop, Photoshop will give me the error message "Could not complete your request because Photoshop was unable to parse the PostScript" and it will abort the attempt to open the file.
Anyone else having Illustrator EPS file issues?
Background info (if needed) Dual 2.0 Ghz, PowerMac G5, 8 gb RAM, running Tiger 10.4.11
I have attached a sample Illustrator file that will not Parse. It will open in Illustrator but not parse into Photoshop or if placed in Quark will not parse and allow for a PDF to be exported.

Thanks for taking the time to write Steve.
I understand that I can drag and drop between programs. Ultimately, when attempting to parse an EPS in photoshop I am merely doing it to confirm that the EPS is indeed corrupt.
As mentioned previously, I predominately use Quark Xpress for my page layout program and until I installed CS4 I have had zero complications with using EPS files. Now I quite commonly can not export PDFs due to corrupt EPS files.
My question to the public is I am alone in this glitch or do others experience the same issue. My first thoughts are that CS4 has a glitch and I should be expecting an update in the near future. But, if I am the only person suffering from this issue than maybe I should be looking at my own software.

[Photoshop CS5] Optimize to File Size working not correctly.

******BUG******
Concise problem statement: Optimize to File Size working not correctly.
Steps to reproduce bug:
1. Open any photo.
2. Draw a slice
3. Save For Web, choose Optimize to File Size, type 10KB (Current Slice).
4. Save "selected slices" only
Results: File result larger than expect (over 10KB)
Expected results: <=10KB filesize.
I uninstalled whole Adobe CS5 Master Collection (Trial) & tried to reproduce the bug in Photoshop CS4, but it was not happened, it's ok on CS4.
Finally, Windows 7 is not reason, it's a bug of Photoshop CS5. Please fix, I don't want to buy a bugged software.
I really need the feature "Optimize to File Size" in my works.
P.S: I tested on 4 PCs, and the results is the same.

In the SFW dialog change the Metadata dropdown to None

DB Cloning.file size is not a multiple of logical block size

Dear All,
I am trying to create database in windowsXP from the database files running in Linux.
When i try to create control file, i m getting the following errors.
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'D:\oracle\orcl\oradata\orcl\system01.dbf'
ORA-27046: file size is not a multiple of logical block size
OSD-04012: file size mismatch (OS 367009792)
Pls tell me the workarounds.
Thanks
Sathis.

Hi ,
I created database service by oradim. Now i m trying to create control file after editing the controlfile with the location of windows datafiles(copied from Linux)
Thanks,
Sathis.

We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize. We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process i

Hi
We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.
We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process in captivate 6. so we request you to create a plugin or give a best option which have batch render quality and optimize in file size,

Captivate is e-learning development software not a dedicated video convertor, you are better off trying something like Adobe Media Encoder or Super.

File Size Will Not Reduce

Similar Messages

Maybe you are looking for