File spam to a separate folder

I have SpamAssassin 3.2.1 setup integrating with an internal MTA. The internal MTA is talking to the message store using LMTP.
When a user sends a test string that is guaranteed to be a spam, everything looks fine except the mail is put in the inbox rather than the designated folder "spam".
The log file in the message store shows
<date> tcp_lmtpss S 0 [email protected] rfc822; yyy+spam@lmtpcs-daemon 250 2.5.0 Delivery to user OK
The action string for the SpamAssassin is "data:, require "fileinto"; fileinto "$U";.
The config file has the following content:
host=x.y.z.t
port=783
mode=0
verdict=spam
debug=1
Thanks

Hi,
Sounds like a known issue. On your mail-store end (not the MTA relay end), make sure your lines look like this in the imta.cnf file:
! tcp_lmtpss (LMTP server - store)
tcp_lmtpss lmtp flagtransfer
tcp_lmtpss-daemonThe flagtransfer is the important keyword.
Then run ./imsimta cnbuild;./imsimta restart and restest.
Regards,
Shane.

Similar Messages

  • Looking for answers on XMP files - where should they be stored as sidecar files?  With the original raw file or in a separate folder?

    Looking for answers on XMP files - where should they be stored as sidecar files?  With the original raw file or in a separate folder?
    Relatively new user of Adobe LR5 and PS CC, about a year old. 
    If they should be stored somewhere beside the folder that contains the originals, where and how to change the settings?
    If I choose to write metadata to the original files, is that sidecar files or does the XMP file show separately?
    To be honest, I usually find a video and I cannot figure this out.  I have never received an answer on any of my questions by the way. 

    Hi there,
    You answered a prior question from me so I wanted to reach out to you about this.   I just need a step by step on how, if possible, to View LRCC on my MacBookPro when the main interface is on my iMac

  • HT3842 Does iTunes store the original music file and copy it into a separate folder? If i delete the original file from finder will it remove it from my iTunes library?

    Hi, on my last PC when transferring music to my new MacBook Pro i noticed i had about 6 duplicated of each song in every album i took hours in removing them.
    I Just wondered Does iTunes store the original music file and then copy it into a separate folder?
    If i delete the original file from finder will it remove it from my iTunes library or vice versa. I didnt want to lose any music like i have some how managed to on my old computer.
    Or should i keep both files of it in the Music folder and also iTunes library folder?
    Which is best ?

    DrewPowell wrote:
    I Just wondered Does iTunes store the original music file and then copy it into a separate folder?
    It does both at the same time.
    When you add files to iTunes, it copies them into /Music/iTunes/iTunes media/ folder. The original file remains where it was.
    You can drag a file to /Music/iTunes/iTunes media/Automatically add to iTunes/ folder.
    This will add to iTunes and move it to /Music/iTunes/iTunes media/.
    I keep a shortcut of this folder on my desktop then simply drag files to the shortcut to add to iTunes.
    Then there are no "extra" files around.

  • I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button

    I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button to navigate back to my starting point the bookmarks are replaced by "page thumbnails". Is there anyway to stop this from happening?

    Hi Pusman,
    While setting up the links, if you choose to open the file in a new window then you won't face this issue, then you can simply switch to the previous file and bookmark view will remain as it is.
    Does that helps with your query?
    Regards,
    Rahul

  • How do I designate a separate folder for files Converted to AAC?

    Can I stop iTunes putting files converted to AAC in the same folder as the original files and thereby forcing (a) me to have to individually "pick them out" and copy them to a separate folder and (b) their names to be changed by adding "1" to the end?
    Or is Apple determined to to make playing iTunes store music on Windows Mobile as inconvenient as possible?

    Pamela, this is the problem I am having:
    Windows Mobile Player (and Touchflo on my HTC) won't play tracks in the format that they download from the iTunes store in.
    To make them play on my WM device I have to apply the "Convert to AAC" function in iTunes. This is in itself intruiging because according to GSpot both the input and output files are in exactly the same format and bitrate, except that the output file is slightly shorter. All I know is that WM won't play the input file but will play the output file.
    The problem I have is that Convert to AAC puts the output files into the same folder as the input files. It seems to do the same thing with playlists. Consequently, to copy the tracks onto my WM device I have to at some point go through the playlist or folder and manually pick out the "converted tracks". This is what I am trying to avoid. The other small problem is that the file names have an annoying " 1" on the end of them, although I can learn to live with that.

  • How to use automator to duplicate files into separate folder?

    i am running the latest version of Yosemite just to clarify.
    My question is, is it possible to use automator to automatically copy a file thats added to a folder to a separate folder?
    to clarify, i have a drive account that has all my university work stored in a folder called university, i also have a folder on my HD called university.
    When i work on something i open it from the university folder on my HD, and when im done working i have to copy the file manually into the drive folder.
    Is there any way that i can use automator to detect when a file gets saved in a folder on my hard drive and automatically copy it to my drive folder?

    Hello,
    I really don't have much of an idea, but since no one has replied yet, I'll offer this...
    I wonder if it's a matter of having to clear browser caches & reloading the page?

  • How Can I put an Artists Live Albums in a separate folder, so they sort by "Concert Date" in iTunes and do not "intermingle" so to speak with Studio Albums?  Is this possible?

    How Can I put an Artists Live Albums in a separate folder, so they sort by "Concert Date" in iTunes and do not "intermingle" so to speak with Studio Albums?  Is this possible?
    That is about the best way I can phrase my question.
    I put year/month/date at the beginning of a show, hoping for them to sort by date and I get mixed results.
    Would creating a Folder within the Artists' existing folder  that said "Pearl Jam Live", inside the "Pearl Jam" folder in iTunes Media help this "Date Sorting Issue"?
    Thank you.

    Or is there a way to go through aperture to make a new reference library that I can move the masters into later?
    you do not move the masters into a references library - you turn your current library into a referenced library.  As Terence Devlin said:
    File -> Relocate Masters
    What you should set up:
    Select a folder, where you want to store your referenced files - probably on an external drive.
    Decide on a hierarchical folder structure inside this folder - that is completely up to you.
    Select a project from your library and use the command "File -> Relocate Masters/Originals" to move the original image files to the folder where you want to go them to. Only take care not to send two projects to the same folder.
    Alternatively, if you do not care about the folder structure Aperture will use, select all images at once from the "Photos" view and let Aperture decide how to assing the folders - in the "Relocate Originals" dialoge you can specify a subfolder format.
    Regards
    Léonie

  • FM import into RH project creates a separate folder for every FM chapter

    I am importing a FM book into RH 9 to create a new help project.   RH creates a separate folder for every FM chapter!  The folder contains the html and CSS.  This is messy and useless since all html will point to a single help CSS for the project.  It will be tedious to move all the html topics to one folder plus I will lose the FM link for future updates.
    Did I miss a step in the import that controls how the project is created in RH?

    Yes, this is deliberate - in fact most people want to sub-divide their .fm files into even finer topics - that's what the pagination setting in the Conversion Settings screen is for. Why do you want them all to be mashed together anyway?
    I've only heard of one other poster wanting to stuff all their FM content into one folder - try searching the forums. I seem to remember there were a bunch of suggestions to things to do from either the FM end of things or the RH side.
    The reason why Adobe did it this way was to give you individual control over the CSS to be applied to individual topics (even if most of us just apply a common one across the board in the SSL recipe when we create our help).

  • Mountain Lion has created new user log-ins and moved old Users to a separate folder

    Mountain Lion has created new user log-ins and moved old Users to a separate folder.
    The new users are set-up as "standard" and the old ones were "Administrators"
    All files are missing, i.e. no desktop files etc. But they are located in a folder called "Users 1" which is a new folder.
    Can anyone help?

    Here is perhaps the solution :
    http://forums.macrumors.com/showthread.php?t=1191262
    follow the "Ratatapa's" instructions.
    1/ boot on Recovery part (command R)
    2/ find "terminal" in disk utilities
    and write "resetpassword" for root. Enter a new password for the root user.
    3/ reboot as root user (or when your are login, log out and typing to open a other user "root")
    in the "system pref" panel, open "users and groups" and then create new user with the same name, same password.. normally it must be asking you about "You are already an account with the same name" say yes. And it's done.
    4/ Log out. re-log as the normal user. desactivated the root user.
    about "root user", see also :
    http://support.apple.com/kb/ht1528
    your welcome
    f

  • Removing some photos & placing in separate folder.

    Thanks for the reply to my last post re: picture sequence being all disjointed.
    I did fix it so it  goes from oldest to newest, but did notice once I close it & go back later it has reverted to newest to oldest again.......
    Anyway.next question, the first 20 some pictures in the folder do not relate to all the rest, which are vacation pictures.
    How do I move these 20 permanently to a separate folder, so the holiday ones are just that.
    Thanks.

    File->Move works, but I would recommend something different.
    I would like to suggest that when you use the PSE Organizer, you no longer think in terms of folders, and that you don't use Folder Location View (except in the case of moving photos to another drive). Folders is an antique method of organizing, and the PSE Organizer was designed to replace folders with a more powerful set of tools. Instead, think in terms of tags and captions, because these give you a much more powerful way to organize and slice and dice your photos than folders gives you. With tags, for example, you can search your photos across numerous holidays to find just those photos that your children are in. You can't do that easily with folders. There are many more advantages...

  • Having a problem isolating RAW files from Jpegs into separate folders.

    I have understood it to be that all file (photo) organization in Elements should be done in the Organizer.  However, I took over 500 shots in RAW + Jpeg, so now I want to place the RAW files in a separate folder so I can make thumbnails from the Jpegs to allow the subjects to select which photos they want copies of.  I will then work on those RAW files.  However, Organizer lists the files in filename order, so manually selecting the CR2 files would be a pain in the butt.  Is there a way in Organizer to sort by size or sort by file extension ... anything other than filename?  Can files be directed to individual folders when first downloaded?  If I sort the files in Windows Explorer and move them, does that mess up the cataloging in Organizer?

    Big-Al-Photoman wrote:
    A --- "Find > by Filename" ?  That is the default, and already shows in this sequence.  Filename creates a sequence of CR2, Jpeg, XMP, CR2, Jpeg, XMP, CR2, Jpeg, XPM, etc. etc. 
    Clearly, you haven't understood properly. It is not a default. I am referring to a menu option. You go to the Find menu in the PSE organizer, then select "by Filename" and then type in CR2 and press ENTER.
    B --- again, not sure if Adobe just didn't understand the question or I am too dense to understand the answer.  I am going to reduce the size of the Jpeg files so I can upload them to an online gallery so the clients can view the shots taken.  I am obviously not going to upload the RAW files or the XPM (I assume the thumbnail created to allow the RAW file to be displayed in the viewfinder or on screen.)  I don't want to reduce the size of the originals (obviously), so I can use the "Process Multiple Files" in Elements to copy the Jpegs and make smaller copies for upload.  I DO NOT want to have to hold the CTRL key down while I select 250 individual Jpeg files manually since that is the ONLY option in the sort sequence they appear in currently.  If Adobe provided the ability to sort the files in a folder "by size" or "by extension", then I could easily deal with only the Jpegs, but in their infinite wisdom, Adobe neglected to include the ability to handle files by this logical method.  So my only option appears to be to create a new folder and put the CR2 (and XPM) files in the new folder until I am ready to post-process the files chosen by my client.
    Obviously, you didn't understand. If you want to reduce the size of your JPGs and then upload, you select the JPGs by Find > by Filename, so then yout have all the JPGs found; and then Ctrl-A to select them all, and then create the reduced size photos via File->Export->As New File. (Of course, you can also do this to the RAWs as well, resulting in a reduced size JPG -- and then you don't even need the original JPGs)
    The point of my inquiry was to find out if Adobe DID provide a way to dealing with a large number of files in a logical and efficient manner, and the response above doesn't really tell me that they did. My assumption from the above response is that Adobe did NOT provide an efficient method of isolating files by type or size.
    The efficient way of doing this has been explained, and does exist in PSE.
    Or am I just too dense to understand an easy, quick solution to dealing with ONLY the Jpegs, resizing them for quick and view-only upload to a gallery, and retaining the integrity of the Elements organizer.???????
    No further comment.

  • File is outside of root folder error in DW...

    What?? Every now and then this error pops up. I just want to add an image to the page...It is in the folder of the client i am working on. The root folder that pops up is a totally different local site in a totally separate folder......How to get rid of / or change this? Thanks so much!! ASAP would be swell! Using CS6.
    https://www.pinterest.com/pin/create/extension/

    <img src="file:///C|/Users/Rebekah/Desktop/WEBs/Mulberry/WEDDINGS_2/WEDDbann.png" alt="Weddings at Mulberry Art Studios" />
    Tell us again please what is the path to the local site's root folder (use Site manager to examine the local settings - this is the field directly beneath the Site Name field)?

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

  • Error while deleting a file which is in a folder which inturn in workspace

    12:20:42.309  DELETE  (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied])  Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
    --- Problem summary: ---
    12:20:42.309  DELETE  (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied])  Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
    I am getting above error while deleting a file which is in a folder which inturn in workspace

    Here is the problem I have with deleting my folder. I had created a WD project TaxTool and and added the DC to my SC. There were obviously some checkedout activities. Being new to this, I deleted the project directly without checking in the activities. Now I have folder TaxTool/_comp with nothing underneath on the DTR server and on my client. I am unable to checkout TaxTool for delete but the checkout of _comp folder fails in NWDS with the following error:
    <b>EDIT  (FAILED: server response: Conflict [(pre||post)-condition failed: x:no-exclusivity-with-existing-checked-out-resources])  comp   (C:\JDI\JDIDEMO1\intelJDI_TEST\dev\inactive\DCs\intel.com\TaxTool\_comp\)</b>
    If I try the same from the DTR shell, I get this following error:
    <b>Unexpected problem occurred during executing command.Lockfile "C:\Documents and
    Settings\bvedamur\.dtr\.syncdbs\5b0d8b2110a7a29883734c0407462df8.syncdbM.lock" is already in use by another process.</b>
    I am the only user in the system (doing R&D) and I have tried Sync and Delete. Nothing works. Help appreciated.
    Thx
    Bhaskar

  • How do I save PDF files by default to the folder of the source file?

    How do I save PDF files by default to the folder of the source file with Acrobat 9.0.0 Standard?

    I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
    Maybe one of the settings in about:config controls that?
    pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere?

Maybe you are looking for