File structures report shows many suspect files: A problem?

Hi friends.
As a part of the MacUpdate springbundle I got the TechTool pro 5. I ran it to check if everything was running as intended, but when it got to the "File structures" job, it found more than 2000 "suspect files" with errors like: "File corrupted - may not load properly", "XML parser couldn't parse file" and "XML file has unbalanced brackets".
What I'm basically asking of you is the following: is this an issue? Should I be worries, and if so, how would I go about fixing it? As I said, it has over 2000 suspect files, with the vast majority as "File corrupted". To be quite honest, such a huge number of issues makes me quite unsettled.
Thanks for your help

William Boyd, Jr. wrote:
Does Disk Utility report any problems?
I made the disk utility verify macintosh HD (if that was what you were asking me to), and it says everything looks to be okay.
I'm not going to list all the files it says are corrupted, for 2004 obvious reasons
The first file's path is: /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.2 .sdk/System/Library/PrivateFrameworks/WebCore.framework/emoji-E21C.png
With the error: "File corrupted-may not load properly"
Another one is:
/Users/Me/Library/Application Support/Adobe/Dreamweaver CS4/en_US/Configuration/Menus/Cache/Accelerators/DWTableContext.xml
With the error: "XML file has unbalanced brackets"
To take an example from the third error-type:
/Applications/Adobe Dreamweaver CS4/configuration/Menus/Adaptive Sets/fr-ca.xml
Error: "XML parser couldn't parse file"
Looking at this myself, it looks to me like something is wrong with the iPhone simulator and dreamweaver.. Would it make sense for me to reinstall the programs?
Thanks

Similar Messages

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

SQL Server 2008 R2 Disk Usage report showing incorrect data file

When I go to ANY database (System, AdventureWorks*, user) in Managemant Studio, I right-click on the db, select Reports, select Standard Reports, and select Disk Usage. The disk usage report shows the correct db on top, but always only shows AdventureWorks_Data.mdf
when I expand Disk Space Used by Data Files section. This happens to any db I try. When I look at Database Properties/Files for that database, the logical and physical file names are correct.
Since the correct files appear in Database Properties/Files, I'm hoping it's just a bug in the report. Same thing happens if I run a Disk Usage by Table report for ANY database, The tables for AdventureWorks always only appear,
Thanks, Mike

Thanks Tibor!
I looked at the Properties for my login under Security/Logins and it shows my default db to be master. Not sure if this is correct, but it sounds plausible. I'll see if I can report the problem.
The only issue I can think of that was out of the ordinary for the install of 2008 R2 EE was this:
I originally installed 2005 DE, since it wouldn't expire. After the install of 2005 DE, I decided to uninstall it and install 2008 R2 EE. In between the installs of 2005 DE and 2008 R2 EE, I installed/uninstalled stupid stuff like 2008
Express, 2008 Express with Advanced Services (?), and 2008 EE. After each uninstall I also did a system restore to be safe.
Now each time I open Management Studio, i get a pop-up stating that there are SQL Server 2005 registered servers on my sytem and asks me if I want to add them into Management Studio. I always say no.
The AdventureWorks db is from 2005 and was installed automatically with 2005. I installed the 2005, 2008, and 2008 R2 AdventureWorks databases to my R2 for class. I'm not sure now if the Disk Usage report is showing me AdventureWorks_Data.mdf
because of my install into 2008 R2 EE or my previous install of 2005 DE.
Hope this kind of makes sense...
-Mike

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara

RE: Reporting after many forte tasks run in batch mode?

Actually, if you're looking for MAKEAPPDISTRIB (I assume that's how you
create distributable) you can see if the command was succesfull or not.
<<deployrep.js>> This Jscript will look for this string and it will
generate a report based on the next line in the log file.
The script assumes you have an environment variable (DESCARTES_ROOT) that
points to a folder (let's say "D:\TEST"). Under that folder you have a log
folder ("d:\test\log") which holds the deploy.log log file. You can easily
change the script to reflect your systems settings.
The generated report looks like that : <<deployrep.txt>>
Norocel Popa
Forte SysEng
(519)746-8110 x 2292
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, March 16, 1999 11:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in batch mode ?
Hi,
I would like to know if overnight builds went okay, and therefore need to
parse the log(s).
The issue is that I don't have a proper string to look for (i.e. for
grep).
If I consider 'ERROR", then the following message won't be understandable.
There might a way to cheat with the indentation (i.e. the lines with only
two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an existing
partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1,
taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in application
"fscript", pid 22713 on node rambo in environment SuperEnv.

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

OM- Reporting Structure report

Hi Experts,
I am generation reporting structure report through standard report T.codes(S_AHR_61016512 - Report Structure Without Persons ,S_AHR_61016513 - Report Structure with Persons ). but i am unable to download to excel formate.
can anyone help me in this regards.
Thanks & regards
Swapna

Hi,
For both the reports, on the report output, click on the dropdown by the print button. Youu2019ll see 4 options u2013 select print preview of entire hierarchy. This will take you to the print preview screen. On that screen, follow System>List>Save>Local File.
Hope this helps.
Donnie

I am frustrated trying to download the latest update. I get an error message 126 and this has been reported on many other forums.

The latest update does not work. I continue to get an error message 126. I am frustrated that the update does not work and this is being reported on many other forums. Apple needs to pick up it's game. Very dissappointed. Has anyone got a simple fix ?

Hey dutch5,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

File Compression Problem

Hello all,
I'm having a strange file compression problem with CS5 on our new Mac Pro. We purchased the Mac Pro to scan and process images, but the JPEGs and GIFs we create from this computer are much larger than they should be when closed (e.g. images that should be compressed to 6KB are reading as 60KB, and the file size is often smaller when opened than closed). Furthermore, anytime we use these image files in other programs (e.g. Filemaker Pro) the inflated file size will carry over. What's even more puzzling is that the same files that are reading as 60KB on our Mac Pro will read correctly as 6KB from a PC. Similarly, if we embed these images -- that were created on the Mac Pro -- into Filemaker from a PC, the image file size is correct. We cannot use the compressed files we create on our Mac Pro because the inflated file size will be passed on to whatever application we use on the Mac Pro (except for Photoshop).
We have been processing images for years on a PC and haven't had any troubles with this. We were thinking for a while that the problem was with the Mac operating system, but after many calls with expert Apple advisers it seems like Photoshop for Mac has to be the issue. We have already tried reformatting and re-indexing the hard drive, and at this point there is nothing else that can be done from Apple's end. The last expert I spoke with at Apple said that it sounds like the way Photoshop for Mac compresses files and how Mac reads file sizes is very different from the way Photoshop for PC compresses files and how Windows reads file sizes. If he was correct, and there is no work-around, we'll have no other choice and will have to return our Mac.
Has anyone else experienced this before? The experts at Apple were thoroughly confused by the problem and so are we.
Thanks,
Jenny

This has nothing to do with compression.
Macintosh saves more metadata, and more previews than Windows - that's one part.
Macintosh shows the size of the file on disk, including wasted space due to the disk block size - that's another part. (look at the byte count, not the size in K or MB).
When you upload the files to a server, or use them in most programs, that extra metadata is lost and the file sizes should be identical.
I can't believe that your advisors spent any time on such a trivial issue...

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

MC$4 report shows PO value in wrong currency

MC$4 report shows PO value in wrong currency EUR (EURO) eventhough PO
was created with SEK (swiss) currency. Report picks data from info
table S012 that also reflects wrong currency.
Please check attached example....
Currency is getting picked up in table S012 info-structure from company
code table T001 (PO belongs to) not from purchase order.
This is certainly bug in standard SAP LIS report. This is inbuilt LIS feature given by SAP & we cannot do any fixing.
Can you provide solution how we can correct this error. How to display correct currency in report & info-structure S012.

hi
in the report the system might be taking the co code currency
what u have to do is go to MC$4 press ctrl+F7
u will get the currency change option change it to what u want
regrads
kunal
awrad if helpful

File sharing problems and horror story (nearly)

I use Leopard on a MacBook Pro, a MacBook and a iMac G4 800 MHz (unsupported model).
I have on the iMac and the MacBook Pro many users (the same ont he two machines) and I always use Fast User Switching.
I have had very few problems with Leopard until now; I like it even if there are some glitches or some new features which are not my cup of tea (hierarchical menus missing from the dock, stacks useless when there are many items, FireWall impossibilities (?) to open specific ports, Back to my Mac working on a Lan but not from outside until now, problems with a few apps (Parallels networking erratic), ...
Now about File Sharing.
Let say my main account is user1 (Administrator), and I have another user2 also administrator, plus user3, user4 standard users.
On the iMac I activate File Sharing.
On the MacBookPro, as user1, if I connect to the iMac Server (using afp://IPaddress_of_theiMac/) I do NOT get the dialog
"Enter your user name and password to access file server YYY
Connect to server as Guest or as Registered User"
but I directly get the dialog
"Select the volumes you want to mount on YYY"
From this, if I select user1 it mounts with full read/write permissions which is normal. It appears that I am connected with my Apple account user1&mac.com (same as mentionned in the Account panel of System Preferences).
On the other hand, if I try to connect to the user2 account, I only get limited access although in the File Sharing Preferences, user1/iMac is mentionned with full Read/Write preferences for the Home Folder of user2.
What is very surprising is that if I log on the MacBook Pro as user2, or user 3 or user4, then connect to the iMac, I first get the dialog to enter a user name and a password. This gives me access with the correct full permissions on user1/iMac or user2/iMac using the corresponding user name/password pair; this is the usual behaviour which is missing when trying to connect from user1/MacBook Pro.
Now for the Horror Story!
Trying to understand what was going on with the permissions of the user2/iMac account, I logged in to the iMac as user1, went to the Users folder and from there had a look on the informations about user2 home folder. In the lower part of the pannel, Sharing & Permissions says "You have no access" (which is normal) and this is followed by a table where users and permissions are listed. It seems user1 has Read and Write access in contradiction with the preceding phrase...
Anyway, I tried to modify these authorizations for user2 by clicking on the lock of the Information pannel and entering name and password of the administrator. Didn't go farther than that. By mistake, I hit Command-Delete and user2 was GONE from the list AND NOT ONLY from the list in the Information window! Using Fast User Switching and going to user2, nothing left on the Desktop and NO Home anymore.
In the System Preferences/Accounts panel, user2 was still mentionned.
In the Users folder, no user2 folder anymore.
Using once again Fast User Switching, I logged as user2 and got by magic an all new Home. Nothing left in Documents, Library or other user1 folders. Standard settings for icons, dock, etc.
My first move has been to use a very recent backup to restore everything (Thank you Mike Bombich from Copy Cloner!).
Once everything was back to normal, I had a look at the Trash from user1 and guess what, the Home folder of user2 was there, complete.
So now I am left with two questions
why is it I do not have the same dialogs when connecting from all the accounts although as far as I can see, configurations are the same?
why is it possible, from an Information pannel to delete the account of another user?
Thank you all for comments!

For the file sharing problems, answer is found in
http://docs.info.apple.com/article.html?artnum=306723

Report showing sum of Budget/actual cost of WBS elements from diff proj

Hi,
i need to display consolidated budget/cost report for separate projects. (example PROJ 1 and PROJ 2)
in both projects, they have similar structure of WBS (same descriptions etc..)
in reports i can run both project but the values are summarized for the entire projects.. (results = Total of PROJ 1 + total of PROJ 2).
but i need report showing subtotals of WBS 1.1 of PROJ 1 + WBS 1.1 of PROJ 2 and so on...
i thought i could do it using CJI8 but i cannot filter it by description and do subtotals since it does not have a description column.
is my requirement possible with standard or need to customize a report?
thanks in advance

hi
please try to use Co Object Name field with sub total

Is there a report showing all the DDL objects for one APP?

Hi,
Is there a report showing all the DDL objects for one APP?
I need to move an app to my workspace. The workspace I need to move it from has approx 20 applications in it, thus all the tables, procedures, etc are too many.
What way is the easiest?
I've looked at exporting the DDL and the app. and look to see what the app needs. But it has many pages.
Thank you, BillC

Hello Bill,
You might find the report in the following location to be helpful:
Home>Application Builder>Application XXX>Application Reports>Shared Components>Application Database Object Dependencies
Regards,
Arie.

File sharing problems with my Media Player, an A C Ryan

I have a media player, an A C Ryan, hooked up to my wifi at home and it normally accesses all my hard disks that is plugged and shared on my iMac. I had no problems when the iMac was on Snow Leopard. Under Network/Workgroup in the AC Ryan's menu, I can see and access all the files on the hard disks.
The moment I upgraded to Lion, all such access was lost. The AC Ryan cannot connect to the hard disks any more via the wifi network. it's as though file sharing has stopped completely. I checked the file sharing settings on the iMac and nothing has changed i.e. the disks were shared as usual. After struggling with many possible solutions and failing (I checked out a lot of forums), I reintalled Snow Leopard and the problems were immediately solved.
Is there something seriously wrong with Lion's file-sharing? Has this been fixed in 10.7.2? My friend who has a similar setup (his media player is the WD Live) has exactly the same file sharing problem with Lion.
I would appreciate any feedback. Thanks!

I believe that NTFS-3G has issues with Lion.
I use Paragon NTFS and have had no issues at all. I am pretty sure that NTFS-3G will get updated, but you need to check their site to find out when.

PDF 'File Save' problem in Firefox

Using Firefox browser, when I select a PDF file that opens in a new window [rather than a new tab], save it and close the window, the AcroRD32.exe process is not stopped. If I then open another PDF file in a similar manner, it can not be saved. Each time you close a PDF window, you have to go to Task Manager and stop the AcroRD32 process before being abl;e to save a subsequent document. This does not happen with IE.
Using Reader 10.1.1 and Firefox 8 on a Windows Vista32 system.

Same bug i see in Opera browser. PDFs doesn't saves without stopping AcroRd32 process. And save dialogue doesn't appears when clicking links (even if web browsing function deactivated in adobe reader settings)...
Apart from this File Save problem, there is more strange things while browsing PDF online, like "blinks", hangs, image dissapear, suddenly lags without any reason, browser crashing and more...
So, because adobe reader prevents to download PDFs, and because it works very buggy with online browsing, especially if website uses adobe flash to show PDFs, the only right solution i found is uninstalling adobe reader. After that File Save problem was gone!

File structures report shows many suspect files: A problem?

Similar Messages

Maybe you are looking for