File Subscription through Message scenario

Hi - I have a scenario where I receive 2 different files, type A (many files )and File B(many files) bunch of files in same folder.
By using just messaging scenario, how can I subscribe the messages and process and drop file type A in 1 folder and file type B in other folder.
MBH

Create and deploy schemas for Type-A and Type-B
Use XML-Receive pipeline in the Receive location where you receive these type messages
In Send port, set the filter based on BTS.MessageType. i,e, Create a send port for Folder1, and set its filter for BTS.MessageType == "YourTypeASchemaNameSpace#rootelement", Create another send port for Folder2, and set its filter for BTS.MessageType
== "YourTypeBSchemaNameSpace#rootelement",
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Similar Messages

When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message.

When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message. It is more convenient for me to play videos in Quicktime since iTunes is such a memory hog. Please help.

You may get better results if you switch to this alternate version: iTunes for Windows (64-bit - for older video cards) and, if needed, reinstall QuickTime. The new (nearly) all 64-bit version doesn't seem to play well with QuickTime. Perhaps if DRM authentication is required QuickTime needs to be able to see something that is part of the older 32-bit code.
tt2

Xml validation in File to RFC Sync Scenario with Validation fails message

Hi All,
We are using PI 7.4 (Dual Stack) the Requirement is File to RFC Sync Scenario(File <---> RFC).and need to do XML validation against XSD Schema. if any Validations fails Response message should send back to sender.RequestResponseBean standard module is using for File to RFC Sync scenario but how to send the response message to sender if any validation fails. adapter level XML validation is not helpful for this requirement. please help out me how to achieve the requirement with graphical mapping.
Thanks in advance.

to validate schema you cannot solve it with graphical mapping but validating the schema in the AAE or the integration engine.
y recomend you to use the AAE validation at sender side, coz the sender system will be notified in case of schema errors.
The response will be validated at Integration Server level.
you can search in the forum, you will get many document about how to configure it.
take a look to my blog: PI 7.3 - XML Validation

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

File to MQ Series scenario

Hi,
I am trying out an File to MQ series scenario using JMS adapter.At the sender side the file is picked up,but the reciver channel is showing the following error :
*Error during channel initialization; exception trace: java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at com.sap.aii.af.service.jms.WorkerJMSSender.init(WorkerJMSSender.java:366)
Can any one provide some pointers to resolve the error.It seems that the reciver channel is configured correctly,but the channel is synchronising with the MQ series.

Hi Thiyagarajan
Pls refer these links for the scenario defenetely wil help
Refer to following blogs .
JMS Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
/thread/217893 [original link is broken]
JMS adapter -Message format pre-requisites
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Please go through the following links.....
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Secondly, to configure JMS adapters;
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
Else ref:
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Thanks!!
Regards
Abhishek Agrahari

File to RFC synchronous scenario stopped Picking the files

Hi Experts,
We have a File to RFC synchronous scenario. Till yesterday night it is working fine.
But suddenly it is stooped working.In moni, i can see the failed messages with the Mapping error " Can not create target element, values missing in the queue context "
No Payload in moni / communication channel monitoring / Message monitoring. I've noticed that, wrong files placed in the To-be- processed files and the adapter picked those files and failed in mapping.
I tried by stop and start the communication channel / did some dummy changes in the communication channel and activated. cleared the cache.
But still the communication channel is not working.when i stop and start the communication channel it will try to process the wrong files and failed.
Give me your valuable inputs to resolve this issue.
Regards
Bhargava krishna

Hi Bharghav,
Please go through the below,
Symptom
FTP Adapter is being used in the business scenario for message processing.
During file processing it is noticed, that the FTP sender channel stops
polling. There is no error in the channel monitor or the trace/log files
and the polling jobs are correctly displayed in the AFW scheduler table.
The issue is observed after a network connection issue with the FTP server.
In order to remove the hanging locks from the FTP Adapter, the parameter
'ftp.timeout' setting is required to be set, which releases the lock once
the timeout value is expired. But in the above situation, the value for the
'ftp.timeout' is not taken properly while establishing the data connection
by File Adapter.
Other terms
FTP Adapter, sender, FTP, adapter, timeout, stalled, network, hang, polling
Reason and Prerequisites
Program error
Solution
The hanging situation has now been improved by code changes. Please see
section "SP Patch Level" of this note for a list of updated software
components.
To get this correction available in your Support Package you need to apply
the patch matching to your Support Package version as per the instructions
in the NetWeaver Support Package Stack guide which can be found on the SAP
Service Marketplace as described in SAP Note 952402.
Thanks & Regards
Uday.S

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to do with the use of my Wacom3 Tablet...I've been having trouble with it and was getting the same message when trying to open the User's Manual in my Applications/WacomTablet file on my hard drive. Any suggestions? I just downloaded the latest version for the Wacom and recently upgraded to Snow Leopard 10.6.7 (which I hate, and my CS3 hates, etc.)

It sounds like you have a a password-protected PDF. The password was set by the person who encoded it.

ALE logical system - File -- XI -- R/3 scenario

Hi
I have the following scenario which I'm trying to run.
File --> XI --> R/3 scenario.
I have created a sender agreement XID|ASN_out|NBD where XID is my XI 3.0 system and NBD is my R/3 system. I have also created an interface determination and receiver determination.
The following error is in transaction SXMB_MONI in my XID system:
"Unable to convert the sender service to an ALE logical system"
Both XID and NBD are business systems defined in SLD and they have both a logical system assigned.
Why do I get this error and how can I fix it?
Best regards
Göran
Message was edited by: Göran Westin
Message was edited by: Göran Westin

Ok. I fixed the problem.
In the Integration Builder - Configuration > Select business system of choice > Menu > Service > Adapter specific identifiers > IDOC Adapter > Logical system - got a value after reading/refreshing it from the SLD.

File Service to IDOC Scenario

HI ,
I am trying file service to IDOC scenario and iam getting following error "Unable to convert sender service FilesService_FILE2IDOC to an ALE logical system".
Here file has to be read and IDOC has to be posted in SAP system. Sender is not an SAP system / 3rd Party system ...itz an FILE sender service.
Settings i have done:
In Message Mapping in target IDOC structure i have disabled Control record
In integration directory IDOC Receiver Communication channel i have not selected "Apply Control Record values from Payload".
In receiver determination in header mapping i have put sender sevice "FilesService_FILE2IDOC ".
But still i receive the same error.
I do not want to send control record parameters in Message Mapping .
Pls throw some light on this ....
Regards
Sri

Hi Sridhar,
Regarding your error, below is the answer...
When you create the business system (in the SLD) you assign a "logical system name" or "ALE name". That is used as the ALE name for transporting IDOCs, and the sender system.
You have to also maintain this name in the R/3 System (tx. SALE, WE20), because IDOC will be noted as arriving from that system.
You also told that you dont want to pass the control records value....Do this, just deactivate the control records segments in your message mapping... let me not explain it further.... just check these blogs below for the same,
/people/sravya.talanki2/blog/2005/12/02/manipulating-idoc-control-records-from-payload
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
And also go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
I hope this helps you solve your problem.
Regards,
Abhy

Mapping error in file(FCC) to rfc scenario

Hi,
i am trying to implement mapping in file (fcc) to rfc scenario. the source file is getting picked up, but the problem is arising during mapping. i am unable to generate the target structure. i am attaching mapping structure as follows
Source Structure                           Target Structure: RFC
storesales                                     -POSDW-CREATE_TRANSACTIONS_EXT
     recordset                                      it_transaction
       gmd_site_101                                 item
      gmd_site_102
      gmd_site_103
      gmd_site_104
here the recorset is mapped to item, and fields of subnode gmd_site_101 is mapped to fields of subnode item. similarly, for the other subnodes. but when testing with xml file, the target field is not getting generated. in FCC parameters, ignorerecordset name is set to "true".
any help would be very helpful..thanks in advance.
warm regards,
kartz

hi
You can test the data using payload from SXMB_MONI in message mapping test tool so as you can get to know the reason of failure.
It would be better if you paste the error you are getting over there.
Check if you have maintained the namespace in CC or not. it should be same maintained if you have kept namespace in message type.
Also check in FCC parameters you must have used ignoreRecordsetName = true
Regards
Raj

Help Required on File to Mail Adapter scenario

Hi all,
Can someone give me some links or material regarding the step by step procedure to configure a file to mail adapter scenario (including the design and configuration). I have already gone through help.sap.com, but I need more clarification. So please guide me accordingly
Regards
V.Kartik

Hi Karthik,
     Also check these links on File to Mail adapter scenario:
    Blogs:
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    /people/sap.user72/blog/2005/06/08/sending-attachments-in-mails
    Sap File on Mail Adapter:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
    Also check these similar threads:
    How to implement file to mail scenario
    What is the process for sending file thru email using Mail Adapter ???
Regards,
Subhasha Ranjan

File to Proxy synchronous scenario

Experts,
I am working on a File to proxy synchronous scenario.
I am doing the content conversion at the sendre side by using java program as input structure is very complex so have to go fr java code. Its a txt file at sender side.
Once I read the file in XI, am doing a graphical mapping ( just one to one mapping) then using the server proxy , a service entry is getting created then response am sending to the receiver.
My question is , can I use graphical mapping as I am using a java class for content conversion? both in one scenario is possible?
I have developed a java code for content conversion and it is working fine. How to use this .jar file in XI?
Can Any one help me wz thsi one?
Thanks in Advance
Virendra

My question is , can I use graphical mapping as I am using a java class for content conversion?
You can use as long as the structure generatde by the JAVA program is same as the source-message structure of the message mapping.
I have developed a java code for content conversion and it is working fine. How to use this .jar file in XI?
In my opinion this should be the adapter module....as the conversion needs to be done in the channel and inclucing it as a mapping wont help.
Regards,
Abhishek.

File to Soap Syn Scenario

Hi Experts,
I have created File to Soap syn Scenario.
I am getting following error in RWB (CC monitoring)::
SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/WRONG_VALUE; Params: SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(1), xi_input120100406-133524-40720100406-133535-09520100406-133535-32920100406-133535-57920100406-133535-82920100406-133536-07920100406-133536-32920100406-133536-56420100406-133536-78220100406-133537-032.xml, ST: ST_XMS_MSGHDR30_DYNAMIC; AdditionalText: An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC; ApplicationFaultMessage: null; ErrorStack: XML tag SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(1) (or one of the attributes) has incorrect value xi_input120100406-133524-40720100406-133535-09520100406-133535-32920100406-133535-57920100406-133535-82920100406-133536-07920100406-133536-32920100406-133536-56420100406-133536-78220100406-133537-032.xml An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC Data loss occurred when converting xi_input120100406-133524-40720100406-133535-09520100406-133535-32920100406-133535-57920100406-133535-82920100406-133536-07920100406-133536-32920100406-133536-56420100406-133536-78220100406-133537-032.xml
Please suggest
T& R
Sushama

Hi Babu,
I am sorry if I was not clear in explaning.
Okay. I meant with the DC parameters the dynamic configuration parameters (or officially called the adapter specific message attributes or ASMA) that the file adapter added in the XI message. I assume Sushama activated this feature to transport the file adapter specific information (e.g., the file name, etc). These parameters are included in the DynamicConfiguration SOAP header. Sushama should check those entries in RWB at the adapter engine.
Some of those parameter values appeared to be too long and resulted in the quoted error:
>sap:DynamicConfiguration(3)sap:Record(1) (or one of the attributes) has incorrect value
Once which parameters are too long, Sushama can decide on how to resolve this issue using one of the options that I suggested in my previous reply.
I hope you got the idea this time.
Best regards, Yza

File to idoc bypass scenario

hi all
I am doing file to idoc bypass scenario....i have to send file containing
EDIDC segment to respective idoc.I have used the idoc name as interface and its also successfully picking the file but while receiving the idoc receiver is showing some error.in sxmb_moni its showing error as obligatory field eiedk01 is missing while its persent in the pay roll of the messege...........please guide me in bypaas
can i check my message expect sxmb_moni .
my receiver adapter is <b>IDOC</b>
sender adapter is<b> XI........</b>
regards
saurabh sharma

Look into the replies by Bhavesh in this thread.
https://forums.sdn.sap.com/click.jspa?searchID=3098859&messageID=3484218
Regards,
Jai Shankar

File Subscription through Message scenario

Similar Messages

Maybe you are looking for