FILE SYSTEM BACKUP IS HANGING ON OSB

Hi all
i am having a test setup for OSB ( using windows 2003 ent 32 bit , administrative server + mediaserver ) , i am using HP c1537a scsi Tape drive ( driver details Microsoft 10/1/2012 version 5.2.3790.0 ) , and while firing the file system backup the job is getting hanged on the webtool,
i am attaching the logs
WEB TOOL LOG
admin/5.1
Type     backup osb-server
Level     full
Family     FS-BKP-MF
Encryption     off
Scheduled time     04/19.11:29
Introduction time     2012/04/19.16:59
Earliest exec time     04/19.11:29
Last update time     2012/04/19.17:23
Expire time     never
State     running since 2012/04/19.17:23
Priority     100
Privileged op     yes
Run on host     osb-server
Requires     host osb-server and family FS-BKP-MF and any device
Attempts     2
Log
     2012/04/19.16:59:49 Job created.
     2012/04/19.16:59:49 Dispatching job to run on administrative server.
     2012/04/19.17:04:03 Drive or volume on which mount attempted is unusable.
ob> lsdev
drive tc-tape in service
ob> pingd tc-tape
Info: drive tc-tape accessible.
ob>
ob> lsdev -lg
tc-tape:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Automount: yes
Error rate: 8
Query frequency: 1024KB (1048576 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
UUID: 26934f4f-fe7b-49ce-a3ed-034a7c9ad046
Attachment 1:
Host: osb-server
Raw device: //./obt0
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: C1537A
Firmware: L111
Tape state: online, write protected
Hardware compression: on
Last read was: compressed
Hardware encryption: not available
Maximum block size: 61440
Remaining tape: 3615300 (uncompressed) blocks (3.70GB)
ob>
please guide me resolve this issue ..
Regards
ASA
Edited by: 927832 on Apr 19, 2012 5:10 AM

Hi Rich
Thanks for your reply.
since i am using a stand alone Tape drive, we will not able to take the inventory , isn't it ?
i hope that my media family parameters are correct only .please find the media family details below.
media family name :- test-media-family
volume id used :- unique to this media family
volume expiration :- 3 years
appendable :- yes
rotation policy & volume duplication policy are ;- none
====================================
While i am mounting the Tape to the drive is gives the following error
ob> mountdev -w test-tape
Error: can't mount volume in test-tape - timed out waiting for bot
ob>
Edited by: 927832 on Apr 20, 2012 3:04 AM

Similar Messages

Is possible control tape library slot 1 - 10 for file system backup

hi ..
i am new to osb , i just install and setup osb , i have a question as below , hope expert can help me
env: testing
rhel 5.5
tape library with 20 slot
file system backup
1. is possible osb only use slot 1 - 10 for file system backup ? amanda can control slot x - slot y for the configuration .
2. how do i label the tape for slot 1 - slot 10 by obtool ? how to control osb auto load the tape for next backup ? where to check the log say that next tape is tape-02 ?
thanks ..

hi dcooksey
how do i use list for a tape drive...for example, if you want tape drive A to only use slots 1-10 from obtool or webtool ?
becoz i new to backup solution & osb ( i always use ghost or acronis to clone the image ) , my thinking as below , pls correct me if i am wrong
slot 1 - 10 for daily backup
slot 11-16 for full system backup
slot 17 - 20 reserve ( this tape only use for full system backup before perform any application upgrade patches , )
daily backup mon - fri ( 2 week ) ( no backup on saturday and sunday ) , server application offline
full system backup friday ( 1 , 14 on calendar ) every 2 week perform full system backup after daily backup completed
for upgrade application ,
perform full system backup after daily backup , then release the server to application team to perform upgrading .
so how to set my media family for the above setting ? the slot configuration is control by media family ?
hope you can help ...

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

File System backup and restore command

Hi All,
I require File System Backup and Restore command in AIX to Trivoli Storage Manager.Please send me the commands.
Thanks in Advance
Regards,
Soumya

Please check this out
Restore
http://www.ahinc.com/aix/backup.htm
restore -xvf/dev/rmt0 Restores all the files located on the tape device that were backed up using the backup command.
Backup
http://publib.boulder.ibm.com/infocenter/systems/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds1/backup.htm
Hope this will help you.
Regards
dEE

How to recover DB2 using offline file system backup.

Gurus,
I had a problem with my BI PRD's database. 1 of my BI consultant accidently deleted some important 2010's data. We've try recover online database backup of BWP into BWQ and retrieve the missing data. However the backup retention period was expired and we dont have any available online backup now.
Only hope is my offline file system backup which backup the whole file system of BWP ONLY.
My question:-
Can i restore the file system (offline backup) into BWQ and rebuild my DB2 in BWQ. Please enlighten me.
Thanks,
Devan.

Hi
You can do it .The file system backup image can be mirroed into production system and by making using of "db2inidb" utility you can restore the whole database.
http://publib.boulder.ibm.com/infocenter/db2luw/v8/index.jsp?topic=/com.ibm.db2.udb.doc/core/r0004473.htm
Thanks
Romansh

OS File System Backup

Hi,
Apps: 12.1.3
DB-11gR1
OS - RHEL 5.6
How i can take OS file system backup manually?-
which is the best mothod?
I know, we can use tar?
could anyone tell me which is the best method..
Thanks
KSV.DBA

In addition to the link mentioned above, do you have to rely on free solutions, or do you have a budget for a solution?
You can perform a complete OS level backup of your Oracle database when it is shutdown, or put the database into online backup mode, but need to review the Oracle documentation for limitations. The tools of choice for Oracle is RMAN, which does not require extra logging or backup mode.
You can use tar or rsync if you prefer to backup data to a shared storage through NFS or use tar to stream the data to an attached tape drive. There is plenty of information and tutorials on how to perform incremental backups on the web, and here tar incremental backup

Oracle Database Point intime recovery with File System backup.

Hi.. Experts...
We have shutdown the database and have take a file system backup on
09.10.2010 @ 10 AM.
We started the database and all the archive logs generated after that are already
available in archive directory till now.
We discovered there were some deletions took place. Yesterday evening at 4 PM.
Requirement.
We want to recover the database till yesterday 3.30 PM.
Can any one send steps to recover with above backup and available archive logs till 3.30 PM Yesterday.
Regards

Experts.....Nick Loy, Varadharajan M, Mark & Volker.............Thanks U Very Much.
TAIL END MESSAGE OF RECOVERY COMMAND
ORA-00279: change 11331655931 generated at 10/10/2010 11:30:56 needed for
thread 1
ORA-00289: suggestion : /oracle/D10/oraarch/D10arch1_123487_607825009.dbf
ORA-00280: change 11331655931 for thread 1 is in sequence #123487
ORA-00278: log file '/oracle/D10/oraarch/D10arch1_123486_607825009.dbf' no
longer needed for this recovery
Log applied.
Media recovery complete.
SQL>
SQL>
SQL> ALTER DATABASE OPEN RESETLOGS;
Database altered.
SQL>
SYSTEM RECOVERED TO DEMAND & RELEASED
T H A N K S -- T O -- E V E R Y O N E .
RGDS

Using old file system backup for Cloning

I have taken an off-line backup of Oracle 11i (11.5.10.2) 15 days ago. Before taking backup of file system , I verified that all the latest Rapid Clone Patches are applied. No changes or patch work in APPL_TOP or DB has been done since that backup. Now I need to do cloning of this instance, how I can use this backup for Cloning.
Rapid Clone scripts create and generate some files/directories so I am not sure whether my Old backup of file system will work or not. What is the best way to use old backup for cloning , also what are the file and directories in addition to the old backup of file system which I need to copy to Target System.
Thanks for reviewing and suggestions.
Samar

Samar,
If you have run preclone before backing it up, your backup should be valid for cloning.
2.1 in the cloning doc has to be in the backup.
These doc's should clear out yours doubts on cloning.
Cloning Oracle Applications Release 11i with Rapid Clone
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1

Oracle DB and File system backup configuration

Hi,
As I understand from the help documents and guides, brbackup, brarchive and brrestore are the tools which are used for backing up and restoring the oracle database and the file system. We have TSM (Trivoli Storage manager) in our infrastructure for managing the backup centrally. Before configuring the backup with TSM, I want to test the backup/restore configuration locally i.e. storing the backup to local file system and then restoring from there. Our backup strategy is to have full online backup on the weekends and incremental backup on the weekdays. Given this, following are the things, I want to test.
1. Full online backup (to local file system)
2. Incremental online backup (to local file system)
3. Restore (from local file system)
I found help documents to be very generic and couldn't get any specific information for the comprehensive configuration to achieve this. Can someone help with end to end configuration?
We are using SAP Portal 7.0 (NW2004s) with Oracle 10g database hosted on AIX server.
Helpful answers will be rewarded
Regards,
Chandra

Thanks for your feedback. I am almost clear about this issue now, except one point need to be confirmed: do you mean that on linux or unix, if required, we can set "direct to disk" from OS level, but for windows, it's default "direct to disk", we do not need to set it manually.
And I have a further question: If a database is stored on a SAN disk, say, a volume from disk array, the disk array could take snapshot for a disk on block level, we need to implement online backup of database. The steps are: alter tablespace begin backup, alter system suspend, take a snapshot of the volume which store all database files, including datafiles, redo logs, archived redo logs, controll file, service parameter file, network parameter files, password file. Do you think this backup is integrity or not. please note, we do not flush the fs cache before all these steps. Let's assume the SAN cache could be flushed automatically. Can I think it's integrity because the redo writes are synchronous.

SAP Backups ; R/3 & file system

Hello,
What is the different between SAP R/3 backup and SAP File System backup?
what are the files that backing up in each cases
To which back up does the oracle DB fit in. (Data Files,Control files, Redo Logs, SPFILE)
To which back up does the O/S files fit in. (here Suse O/S)
thankx

There is not any concept of SAP file system backup.....it means OS level file system backup.
SAP R/3 backup can backed up all the sapdata(database) files, controlfiles as well as redologs.
OS filesystem level backup can backed up all the files based on your requirement and rotation.
Both backups you can use for restorations.....SAP R/3 backup will take all the responsibilities in backup as well as in restoration.
but in OS level backup first you must know which files need to be backed up and what exactly the all directoruies contains.
Regards,
Nick Loy

During Windows install, says the Bootcamp Windows partition is incorrect file system and won't install

I had another Macbook Pro retina which I installed Windows 8 on with no problems via bootcamp. I just updated to the late 2013 model of the Macbook Pro, and attempted to do the same thing but have had problems. I create the partition for Windows with Bootcamp, restart the computer, and after I enter my security key in the Windows installation screen it comes to the screen where you have to select the appropriate installation drive. When I select the drive I created for Windows, it says that it can't install due to the file system. I have no idea why I'm having this problem because I had done this once before....I can't for the life of me figure out what's wrong and I'm at a loss.
If anyone can point me in the right direction I will greatly appreciate it...also let me know if there are differences from the early 2013 model and late 2013 model that would've created this problem. Thanks!!
Robert

Well, here is what happened...
Somehow in making a Windows partition then removing the partition so many times I created an error where it only showed 1/2 of my hard drive...like it was starting to create the second half for the windows side and ran into an error.
So this turned out to be a blessing in disguise, because what I had to do was go to "Command + R" when I was starting up and format the entire drive, all 500 gb. This formatted the whole drive and must've erased whatever was causing the trouble.
Of course, then I had to reinstall OS X, and reinstall my Time Machine backup, but then I opened bootcamp and created the Windows partition again. This time, when I ran the EFI installer you were referring to on the far right (which I had tried before), it allowed me to click next and continue once I selected the Windows partition. Thank God! It must've fixed whatever file system error was hanging it up there every time....because it's installing now.
What I would suggest if all else fails, just format the whole dang thing. Then try from square one and see if you can install

ECC6 EHP2 (ABAP+Java) system copy using file system copy

Hello Experts,
I have a question around system copy method for a dual stack ECC6 EHP2 system.
We are planning to take full file system backup of this entire ECC6 EHP2 dual stack system and throw it on a completely new hardware with new host name but same SID. We are also planning to do a host renaming in instance profiles and re-building the control files in target system after we finish the file system restore.
Is this method supported in SAP ? Or we strictly have to use SAPinst to do export and import method. In any case our source and target platform is not going to chance as per our scenario.
Any suggestions will be greatly appreciated.
Thanks,
Harshal

> Thanks for the quick response. Is their any document that says it is not supported ? Because of no proper document that says no to do it, client want's to try it out.
For the ABAP part this is certainly feasible.
The Java part has not only issues with the secure store but also with SID and hostname. The old values are stored in many places in the database and in, depending on the applications installed, many .properties files in the filesystem. So it would be not enough to somehow regenerate the secure store but also change hostname and SID in different places that are not really all documented.
What you are basically looking for is
Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
with the significant sentence
This note should be applied only when the hostname of a machine
where the j2ee engine was already installed has changed.
It does not replace the SAP official system copy procedure and
MUST NOT be used for copying of an instance to another host and/or with different SID.
Markus

Abap+Java System Backup

Dear Experts,
We just take our bi system(abap+java) backup online, so could you please help me which files we need to backup during the Sap system is online,
As the below help.sap.com link said that for filesystem backup "Create a backup of the SAP system directory /usr/sap/<SID>." (before we need to stop SDM)
http://help.sap.com/saphelp_nw70/helpdata/en/4b/d8f23ea4b42e5ae10000000a114084/content.htm
Can we backup entire /usr/sap/<SID> directory while sap and db is still runnig ? if not which directories we need to backup ?
Should we backup filesystem and db backup at the same time for a consistent backup, or can we schedule separately filesystem and db backup if there is no deployment exist between db backup and filesystem backup schedules,
Best Regards,
Atakan

As suggested you can either go with the ofline backup for the abap and for Java you need to have the filesystem backup.
Or you should go witht he file system backup of all the file system.But for that you need downtime.
So what i shall suggest you thet go vith the online backup and have the archive log on and have archive logs backup too.
And just the online backup completes have the Java export of the Java system of your BI.Durng the exportthe SDM will stop while the Servernode and the dispatcher service will be running,so no error will occur when some one is using the JAVA BI.
This is the safest method ad you can recover the JAVA system any time.Please also have an offline backup at weekends of the abap system when its down.
Please check the Password of DDIC of client 000 and the J2ee_admin before taking the export.
Thanks
Rishi Abrol

SAP ECC 6.0 file system Restore

Dear Friends,
Happy Holi.
I have restore file system backup of our development server to another host having oracle 10g and ECC 6.0.
After restore database has been up successfully.
But listner is not running when I trid to run listner it is giving the error as below.
jkeccbc:oradvr 2> lsnrctl start
LSNRCTL for HPUX: Version 10.2.0.2.0 - Production on 19-MAR-2011 15:18:33
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /oracle/DVR/102_64/bin/tnslsnr: please wait...
TNSLSNR for HPUX: Version 10.2.0.2.0 - Production
System parameter file is /oracle/DVR/102_64/network/admin/listener.ora
Log messages written to /oracle/DVR/102_64/network/log/listener.log
Error listening on: (ADDRESS=(PROTOCOL=IPC)(KEY=DVR.WORLD))
TNS-12557: TNS:protocol adapter not loadable
TNS-12560: TNS:protocol adapter error
TNS-00527: Protocol Adapter not loadable
Listener failed to start. See the error message(s) above...
Regards
Ganesh Datt Tiwari

Hi Mark,
Please find below
cat listener.ora
Filename......: listener.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY = DVR.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
         (KEY = DVR)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST =jkeccbc)
          (PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = DVR)
      (ORACLE_HOME = /oracle/DVR/102_64)
===========================================
cat tnsnames.ora
Filename......: tnsnames.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
DVR.WORLD=
(DESCRIPTION =
    (ADDRESS_LIST =
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = jkeccbc)
          (PORT = 1527)
    (CONNECT_DATA =
       (SID = DVR)
       (GLOBAL_NAME = DVR.WORLD)
Regards
Ganesh Datt Tiwari

SAP file system restoration on other server

Dear Experts,
To check that our offline file system backup is successful, we are planning to restore the offline file system backup from the tape on to a new test server.
Our current SAP system (ABAP only) is in cluster with CI running on one node (using virtual host name cicep) & DB running on another node (using virtual host name dbcep).
Now, is it possible to restore the offline file system backup of the above said cluster server on to a single server with a different host name?
Please help on this.
Regards,
Ashish Khanduri

Dear Ashish
We want to include file system backup process as part of our backup strategy. To test the waters, we are planning to take a backup of the at filesystems level. Following are the filesystems in our production systems.
We have a test server (hostname is different), without any filesystems created beforehand.
I want to know:
1. Which filesystems will be required from the below:
/dev/hd4         4194304   3772184   11%     5621     2% /
/dev/hd2        10485760   6151688   42%    43526     6% /usr
/dev/hd9var      4194304   4048944    4%     4510     1% /var
/dev/hd3         4194304   2571760   39%     1543     1% /tmp
/dev/hd1          131072    129248    2%       85     1% /home
/proc                  -         -    -         -     - /proc
/dev/hd10opt      655360    211232   68%     5356    18% /opt
/dev/oraclelv   83886080 73188656   13%    11091     1% /oracle
/dev/optoralv   20971520 20967664    1%        4     1% /opt/oracle
/dev/oracleGSPlv   83886080 74783824   11%    18989     1% /oracle/GSP
/dev/sapdata1lv 833617920 137990760   84%     3189     1% /oracle/GSP/sapdata1
/dev/sapdata2lv 623902720 215847400   66%       82     1% /oracle/GSP/sapdata2
/dev/sapdata3lv 207093760 108510632   48%       24     1% /oracle/GSP/sapdata3
/dev/sapdata4lv 207093760 127516424   39%       28     1% /oracle/GSP/sapdata4
/dev/origlogAlv   20971520 20730080    2%        8     1% /oracle/GSP/origlogA
/dev/origlogBlv   20971520 20730080    2%        8     1% /oracle/GSP/origlogB
/dev/mirrlogAlv   20971520 20762848    1%        6     1% /oracle/GSP/mirrlogA
/dev/mirrlogBlv   20971520 20762848    1%        6     1% /oracle/GSP/mirrlogB
/dev/oraarchlv 311951360 265915600   15%      526     1% /oracle/GSP/oraarch
/dev/usrsaplv   41943040 41449440    2%      165     1% /usr/sap
/dev/sapmntlv   41943040 20149168   52%   565823    21% /sapmnt
/dev/usrsapGSPlv   41943040 25406768   40%   120250     5% /usr/sap/GSP
/dev/saptranslv   41943040   5244424   88%   136618    18% /usr/sap/trans
IDES:/sapcd     83886080   4791136   95%    18878     4% /sapcd
GILSAPED:/usr/sap/trans   41943040   5244424   88%   136618    18% /usr/sap/trans
2. Is it possible to directly backup the filesystems (like /dev/oracleGSPlv)? This requirement is because, when I backup (using tar) /oracle, all the folders in /oracle, like /oracle/GSP, /oracle/GSP/sapdata1 etc, are also backed up. I do not want it. I would like to backup the filesystems directly.
3. Which unix backup tools are used to backup the individual filesystems?
4. How do we restore the filesystems to the test server?
Thanks for your advise.
Abdul
Edited by: Abdul Rahim Shaik on Feb 8, 2010 12:10 PM

FILE SYSTEM BACKUP IS HANGING ON OSB

Similar Messages

Maybe you are looking for