File system corrupted *after* it was unmounted

Hi all,
I'd be interested in any opinions on this problem.
I recently bought a 1TB Samsung Story Station 3 usb hard drive for use with Time Machine.
This model of drive has a power switch on the front. Most of the time I don't need hourly backups so my plan is to leave the drive turned off most of the time and only turn it on when I feel the need for automatic hourly backups.
A beautiful setup... except... The file system keeps getting corrupted and it is not always repairable.
What is happening?
My procedure is to eject the disk then switch off the drive.
About half the time an immediate disk verify will report that the disk requires repair.
I have tried variations of this with very similar results. Here is a typical failure scenario:-
1 - Start Time Machine "Back Up Now"
2 - Let it copy some data then stop the backup (if necessary)
3 - Eject the disk
4 - Switch off the drive
5 - Switch on the drive
6 - Verify
Variations on the theme...
I have tried the drive with and without a bootable image restored to it and therefore with and without journalling on the file system (I believe).
1, 2 - I have tried copying data using finder instead of using time machine.
3 - I have tried umount -f and diskutil unmount
Note that umount without -f reports the drive is busy but other ejection/unmount mechanisms work.
Is this related?
The only thing that may have made a difference is that powering down the mac, instead of just the drive, after ejection has not yet resulted in a damaged file system.
The obvious conclusion to draw is that a buffer somewhere is not being flushed before I turn off the drive, but is this buffer in OS X or in the drive itself?
In either case I assume other people are having the same problem.
For now I will just leave the drive turned on all the time. Maybe this is what everyone else does so nobody else has sees the problem.

I need help with my MP3 Player. This is the second one I have bought and it keeps going to 'File System Corrupted'. Its an RCA MP3 Player. Holds 5GB's. My first one lasted about 6 months and this one only 3 months. I don't drop it. Like maybe once, but on a soft floor and its never been thrown or beaten on. No marks on it from being dropped or hit on anything. Also I can't get it to respond to my computer. I plug it in and says, 'File System Corrupted'. There needs to be like a way to fix it. Other wise the people who built it are getting money easily with a device that works only a short limited amount of time. I've pressed my power button and held it for 0 seconds. Nothing happens. I'm really annoyed with this device. I've waited much money on it. Is there at all a way to fix it. ~Dark Warrior~

Similar Messages

  • CC configuration causes freezing and file system corruption

    I have received no response for:
    http://forums.adobe.com/message/6074118
    It is a major issue, can I file an issue/fix request somehow?
    Basically it appears that the default configuration when installing the complete product suite causes the OS (OSX Mavericks) to freeze unpredictably and render the system unusable unless shut down and rebooted. This may result in file system corruption and data loss requiring complete reinstall of OS and all products.
    Some have mentioned 'drive' is causing this, but I am not familiar with that component and do not see any options to remove or disable such a product in CC.
    I do not want any non-essential add-ons (like Bridge?) - just a reliable production configuration so I can get work done.
    The risk of having the system 'locked up' or file system corrupted is unacceptable.
    Thanks,
    Mike

    Hi mkrjf,
    Please enable root account and try to use Photoshop and let me know if still the same behavior.
    Root: http://support.apple.com/kb/PH14281
    Regards,
    Romit Sinha

  • Files get corrupted after import-export

    Hi
    After exporting images from HTML DB 2.0 and importing them some of the files are corrupted after import.
    This has happened with one .js file and with one .pdf file.
    All the other (including some PDF-s) are correct.
    The "File Character Set" specified on import is correct and there are no other parameters I can change.
    If I look the contents of corrupted files it seems that another file has been pasted at the end of the original file.
    What could be wrong?

    Hello,
    Any news on this ? I have the same (reproducable) problem with a .js file.
    Uploading works fine, but when I try to download it again, the contents of another file seems to have been appended at the end. The file also doesn't work when I try to include it using #WORKSPACE_IMAGES#...js
    Matthias

  • JPG files become corrupt after Exporting in LR 3

    Does anyone have any idea what would cause
    my JPG files to be corrupt after I export my edited Raw images in LR3?  There are no problems with the Raw file, but once I edit them, apply what ever settings to them in LR I need, I export them as JPG to the same hard drive but in a sub folder where the raw files are, they will not open in photoshop or anywhere else. They are corrupt or lacking data????   When I upload them to my proofing website, there are colored streaks all through the image.  Now, I noticed that when I go into that folder of RAW images, and delete the .xmp files, I have to start over, but it fixes the problem.  So, now, I can't use .xmp sidecar files to save my editing. I'm fairly new to LR, so any suggestions would be great. I did recently upgrade my system to OS windows 7.  Everythign was fine till I had to reinstall everything on my computer...and I also changed hard drives. I upgraded to a Terabyte drive moving all my images from a 500G to the terabyte.  Could that cause my sidecar files to be corrupted?????
    Thank you!!!!!

    I doubt that the XMP files have anything to do with this, as Lightroom doesn't use these files when it creates an exported file.
    It sounds like your hardware may be the culprit; these types of corrupt files are often caused by a failing hard drive. Some corruption may have happened in the transfer from one hard drive to another; or the new hard drive has some sort of problem.
    Can you hook up the old hard drive again and see what happens to the photos there? Open one of them and compare it to the photo on the new hard drive.

  • Help - odd file system corruption.

    I have something very worrying going on on my system. The contents of an important folder is being listed differently in 3rd party applications vs the Finder. Apps which use a non-OS file browser cannot see the up to date contents (its an important project I'm currently working on), instead they only list folders from months ago which are now long gone and don't show the current true contents at all. Eg Cinema 4D's Content Browser can't see the current files correctly, but it can just fine via the OS Open/Save dialog.
    Even worse is that Chrono Sync has exactly the same problem. When it syncs it correctly lists some of the current files that I'm working on, but in the Anylise section, manually drilling down to my working project folder again shows the incorrect contents!
    I have copied the directories to a new HD but even THEY show the same errors when not viewing the contents directly with Lion file browsers***
    I can remember once when I first saw this in Cinema 4D I immediately checked in the Finder - and the Finder showed the wrong contents too !- I refreshed the Finder window by clicking a different folder and back to the working directory which then updated before my eyes to the correct contents.
    How can I fix this? It seems like there is an immenent serious corruption about to happen to my files and/or disk. Disk Utility shows no errors, nothing to repair. Can/should I use Diskwarrior or some other repair app. Help!
    (***I just remembered that I used CCC in block level copy mode so this might account for why the corruption has been transferred to the new drive. I am copying the working directory to the new disk using drag nd drop in the Finder to see if that helps. However I still need the underlying corruption in my User folder repaired)

    Yes, I have quite a comprehensive backup strategy in place (involving a Drobo for nightly CCC backups, a CCC nightly bootable disk clone and TM for hourly backups). The Block Copy is for the bootable disk. The nightly Drobo backups are done with vanila CCC file copying,
    Disk Util does not find any problems, neither did Disk Warrior. SMART is all OK.
    However as I said, the problem is present on one of the backups as well which has put the integrity of the rest of my backups in doubt. also I have tried a direct Finder copy to a new drive (instead of CCC block copy) but the problem persisted.
    I have however come up with a temporary fix: I moved the current folder to the trash, navigated to the parent directory using Cinema 4D's Content Browser wherein it 'saw' the ancient folder once again. This errant folder was now also visible in the Finder since the original folder (which has the same name) was now in the trash. I renamed it and moved it to the trash too. Then put the original folder from the trash back into its parent directory and emptied the trash removing the errent folder for good. It seems that did the trick of updating whatever caches or databases were broken and all my apps can correctly see the correct folder and its contents again.
    This 'historical' version of the folder was being linked to by 3rd party file browsers I think because in the past it had the same name in the same location as the current folder. Where and how the OS got confused is still a mystery. Does it keep different file system records for the finder vs other apps?
    I am not 100% convinced this is a true solution though as there may well be a deeper problem afoot.
    I would like to see some kind of error/fixed message from Disk Util just so I know the OS is on top of this problem. As it stands my Mac thinks everythin is A-OK.

  • _NTFS - File system corrupt

    A couple of weeks ago I purchased a new Seagate HDD because the old hard disk was failing.  Now I get a message every day in the event viewer that the NTFS file system structure on the disk is corrupt and unusable.  I have run checkdisk several
    times, but the message keeps reappearing.  I also downloaded Update for Windows 7 for x64-based Systems (KB982018), but I still receive the message.   I do not know how to delete shadow copies on C:.

    Hi,
    What is the result of chkdsk command?
    Generally, if you got a corrupted disk, in the result of chkdsk output, you need get information about disk fault.
    If this is a hardware issue, please contact the device manufacture for more help.
    Alex Zhao
    TechNet Community Support

  • Oracle vm 3.1.1 server pool file system corruption

    Hi
    I have a small lab environment composed by 2 Oracle VM Servers and SAN access.
    This morning somehow the OCFS2 Server Pool File System (the 12GB one) corrupted and the Server Pool seems dead. How can I recover from this error? I looked in the documentation and MOS but found nothing
    Thank you

    I know it would be a lot of work in such a scenerio. I don't know what you're using for storage but you could snapshot or replicate the pool storage to create a backup that can be restored.
    I do wish they would let you select more than one VM guest in the VM Manager. Would be really nice to have such. Seems like it would be a rather easy feature to implement.

  • Windows has detected file system corruption on local disk. How can i solve this problem?

    Microsoft Windows [Version 6.1.7600]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>chkdsk
    The type of the file system is NTFS.
    WARNING!  F parameter not specified.
    Running CHKDSK in read-only mode.
    CHKDSK is verifying files (stage 1 of 3)...
     4 percent complete. (148991 of 343808 file records processed)
    Attribute record (128, "") from file record segment 154351
    is corrupt.
     4 percent complete. (157441 of 343808 file records processed)
    Attribute record (128, "") from file record segment 165044
    is corrupt.
    Attribute record (128, "") from file record segment 170460
    is corrupt.
     5 percent complete. (171904 of 343808 file records processed)
    Attribute record (128, "") from file record segment 176325
    is corrupt.
    Attribute record (128, "") from file record segment 176329
    is corrupt.
    Attribute record (128, "") from file record segment 176849
    is corrupt.
      343808 file records processed.
    File verification completed.
      3390 large file records processed.
    Errors found.  CHKDSK cannot continue in read-only mode.
    C:\Windows\system32>

    well actually HP notebooks bioses have some diagnostics an user can run: HDD test, memory check, battery check thats all.
    Still U can use HD Tune if U download it - freeware. But  Hard Drive test U can do in Bios also works very well. I suggest this one cause when it detect something HP wont be oposing to U'rs repair request.
    click on Kudos if i helped U

  • QFS don�t update File System space after a failover

    When I do a fail-over (get down a master node of device QFS) while I delete a file the space on it (FS) is inconsistent (df command show mayor space than du command) and I have to do a file System Check on it to get free space.

    Thanks,
    The version of QFS is VERSION.4.6
    SUN Cluster version 3.2
    Solaris 10 8/07
    The file "mcf" is
    # Equipment Eq Eq Family Device Additional
    # Identifier Ord Type Set State Parameters
    kml 1 ms kml on shared
    /dev/did/dsk/d7s0 10 md kml on
    /dev/did/dsk/d8s0 11 md kml on
    /dev/did/dsk/d9s0 12 md kml on
    /dev/did/dsk/d10s0 13 md kml on
    /dev/did/dsk/d11s0 14 md kml on
    /dev/did/dsk/d12s0 15 md kml on
    /dev/did/dsk/d13s0 16 md kml on
    /dev/did/dsk/d14s0 17 md kml on
    /dev/did/dsk/d15s0 18 md kml on
    /dev/did/dsk/d16s0 19 md kml on
    /dev/did/dsk/d21s0 20 md kml on
    /dev/did/dsk/d22s0 21 md kml on
    /dev/did/dsk/d23s0 22 md kml on
    /dev/did/dsk/d24s0 23 md kml on
    /dev/did/dsk/d25s0 24 md kml on
    /dev/did/dsk/d26s0 25 md kml on
    /dev/did/dsk/d27s0 26 md kml on
    /dev/did/dsk/d28s0 27 md kml on
    /dev/did/dsk/d29s0 28 md kml on
    /dev/did/dsk/d30s0 29 md kml on
    # samfsinfo kml
    samfsinfo: filesystem kml is mounted.
    name: kml version: 2 shared
    time: Thursday, April 10, 2008 4:48:05 PM PYT
    count: 20
    capacity: 000000003d064400 DAU: 64
    space: 000000003d04e480
    ord eq capacity space device
    0 10 00000000030d1d00 00000000030d0580 /dev/did/dsk/d7s0
    1 11 00000000030d1d00 00000000030d1c00 /dev/did/dsk/d8s0
    2 12 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d9s0
    3 13 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d10s0
    4 14 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d11s0
    5 15 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d12s0
    6 16 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d13s0
    7 17 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d14s0
    8 18 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d15s0
    9 19 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d16s0
    10 20 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d21s0
    11 21 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d22s0
    12 22 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d23s0
    13 23 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d24s0
    14 24 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d25s0
    15 25 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d26s0
    16 26 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d27s0
    17 27 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d28s0
    18 28 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d29s0
    19 29 00000000030d1d00 00000000030d1c40 /dev/did/dsk/d30s0
    #df -k |grep kml
    kml 1023820800 5384 1023815416 1% /oradata_kml1
    #clrs status -g qfs-kml-rg +
    Cluster Resources ===
    Resource Name Node Name State Status Message
    qfs-kml-rs m9ka Online Online - Service is online.
    m9kb Offline Offline
    Best regasts,
    Ivan

  • Problem with File System Repository after release change

    Hello,
    we have been changing the Portal release from EP 6.0 to SAP NetWeaver Portal 7.0 SP17. The OS of the host is Windows 2003 Server.
    If I open the component monitor to watch the repostitories, the state of the file system repositories are red and a error message occurred:
    Startup Error:  getting mapped math - Logon failure: unknown user name or bad password
    I checked the logon credentials....they are ok. Also I checked the access from the Portalhost to the Windows File System....it´s ok too.
    In our previous portal release the FSR were ok!!
    Is there a difference between the file system repository configuration in portal 6.0 and portal 7.0?
    Thanks and regards
    Tom

    Hello Hussain,
    I have checked the username and the password of the user who have full access on the Windows file system, but the same error occurred. In the Network Path we have configured a domain user for the file system access. Here is the configuration of the network path:
    Name: Test
    Description: Test
    Networkpath:
    Host\share
    Password: ****
    Re-enter Password: ****
    User: domain\user
    Here the configuration of the repository:
    Name: Test
    Description: Test
    Prefix: /Test
    Lookup Mode: caseless
    Root Directory:
    Host\share
    Repository Services: Nothing
    Property Search Manager: com.sapportals.wcm.repository.manager.generic.search.SimpleManagerSearchManager
    Security Manager: AclSecurityManager
    ACL Manager Cache: ca_cm_rep_acl
    Windows Landscape System: Microsoft_Windows_KM
    Read only: unchecked
    Could it be that I need a user mapping for the access of the windows file system?
    Perhaps the configuration of the Windows Landscape System is wrong?
    regards
    Tom

  • Reinstalling Tiger After File System Corruption

    One of my users inadvertantly deleted the /var directory on my Tiger system. The system will now only boot to an sh prompt and no files are accessible.
    I need to re-install the OS. The re-installation docs describe methods that are accessible from Mac OS. What I need is to perform a clean install. On Linux or Windows this would be accomplished by booting from the installation media and performing a clean install.
    What is the equivalent process for Macs? Can I boot from the cdrom? I can't even get the DVD ROM drive to open.

    Hi hutzut,
    Yes, you boot from Tiger Install DVD, choose which installation (in your case, I would choose Erase & Install, not Archive & Install), choose then also Custom Install if you don't want all drivers, languages etc installed.
    It's a very easy and fast process, no need to know anything about computers.
    To open the CD drive:
    --> restart with the mouse button depressed.
    I don't know what is a "sh prompt", but you may want to remember also the Terminal commands to open it:
    drutil tray open
    drutil tray close
    drutil tray eject
    and restart from the Install DVD (already in the drive), by keeping the C key depressed.
    Good luck!
    Axl
    239/2685

  • HELP!! File system corrupted

    Hi,
    I got the filesystem on my LaCie Biggest Quadra 4 Tb external RAID disk suddenly corrupted and the system doesn't recognize the disk anymore, but the RAID controller does not complain about disk errors. Shortly, what happened:
    - the disk is my Time Maschine disk
    - I had a simulation code running over night writing output on that disk, too
    - the disk was nearly full (2 Gb free)
    - I found my code hanging and access to that disk rather slow, but I continued working without using that disk much
    - I did the 10.5.3 update and rebooted the machine
    - after boot the machine complained that the external disk is not recognized
    (BTW: I don't think the upgrade was the problem. I cannot see the disk even from my laptop which I didn't upgrade yet!)
    Disk utility does see the disk as a general volume, the original volume is not recognized. With disk utility I could only initialize the disk, so no chance to repair. "Data rescue" sees the volume with it's name, I haven't tried yet to see if it would recover files from that. So, now my question for the gurus over the net:
    - is there any other option to repair the filesystem, I don't think I have an issue with the disk itself, as the RAID controller should complain about that.
    - if the only option is to recover the files to a different disk, does it make a sense to recover the time machine file structure? That structure is overfilled with hard links that I don't believe will get recovered correctly. Is there a chance to make recovered or copied time machine backups work again on a different disk?
    - how could it come that the fs got corrupted such that the disk isn't recognized anymore as a HFS+ volume?
    Any help will be greatly appreciated,
    Thanks,
    Thomas

    Just in case someone else gets to this topic:
    I found out that the partition table got corrupted. No plan how that happened, the RAID seems ok. I was able to adjust that problem with a free program called testdisk (http://www.cgsecurity.org/wiki/TestDisk). After that the volume mounted again. Disk utility found problems on the filesystem which I repaired. I have a 50 Gbyte image of my powerbook disk on that filesystem which mounts if I skip verification, but fails verification. So, the filesystem got really corrupted, but at least I could mount it again and save the possible.
    Thomas

  • File System Corrupted - Now /var/lib/pacman messed up

    My root partition managed to get corrupted, fsck fixed things for the most part. The main long lasting problem seems to be in /var/lib/pacman. A bunch of the files from extra and a few from community are now missing. When I tried to do a pacman -Syu it updated a few things but also gave a long list of errors since it couldn't find the desc files:
    error: could not open file /var/lib/pacman/extra//a2ps-4.13c-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//aalib-1.4rc5-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//abcde-2.3.3-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//abcm2ps-4.12.30-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//abiword-2.4.6-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//abiword-plugins-2.4.6-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//abook-0.5.6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//abuse-0.7.0-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//acct-6.3.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//achessclock-0.9.2b-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//acidrip-0.14-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//acpi-0.09-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//acpid-1.0.6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//acroread-8.1.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//adns-1.4-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//adzapper-20070317-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//afterstep-2.2.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//agg-2.5-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//aide-0.13.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//aiksaurus-1.2.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//akode-2.0.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//alacarte-0.11.3-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//allegro-4.2.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//alltray-0.69-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//alsa-lib-1.0.14-5/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//alsa-oss-1.0.14-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//alsa-utils-1.0.14-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//alsaplayer-0.99.79-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//amarok-base-1.4.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//amarok-engine-xine-1.4.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//amule-2.1.3-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//anjuta-2.2.1-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//anthy-9100-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//antiword-0.37-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//antlr-2.7.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//apache-2.2.6-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//apache-ant-1.7.0-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bmp-wma-0.1.1-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bmpx-0.40.13-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bochs-2.3.5-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bogofilter-1.1.5-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bomberclone-0.11.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bonnie++-1.03a-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//boost-1.34.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bootchart-0.9-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//brltty-3.7.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bs-2.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bug-buddy-2.20.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bumprace-1.5.1-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bungmeter-2.0.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bzflag-2.0.8-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//bzr-0.90-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//c-ares-1.4.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cabextract-1.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cairo-1.4.10-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cairo-perl-1.041-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cairomm-1.4.4-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//came-1.9-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//camsource-0.7.0-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//capi4hylafax-010300-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//castle-combat-0.7.4-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//catdoc-0.94.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ccache-2.4-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ccaudio-1.2.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cccp-0.9-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ccmalloc-0.4.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ccrtp-1.5.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ccscript3-1.1.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cdargs-1.33-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cdcd-0.6.6-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cddb_get-2.27-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cdrdao-1.2.2-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cdrkit-1.1.6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cdtool-2.1.8-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cdw-0.2.4-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cgoban2-2.6.12-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//checkpassword-0.90-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//chemtool-1.6.10-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//chkrootkit-0.47-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//chmlib-0.39-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cinepaint-0.22.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//circuslinux-1.0.3-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cl-ppcre-1.3.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cl-ppmx-1.0.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cl-sdraw-1.0.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//clamav-0.91.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//clanlib-0.8.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//claws-mail-3.0.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//claws-mail-extra-plugins-3.0.1-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//clisp-2.41-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cln-1.1.13-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//clustalw-1.83-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//clusterit-2.4-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cmake-2.4.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cmatrix-1.2a-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cmt-1.15-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cmucl-19d-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cmus-2.2.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//codecs-20061022-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cogito-0.18.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//colortail-0.3.0-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//commoncpp2-1.5.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//compface-1.5.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//compositeproto-0.4-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//conky-1.4.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//connmon-0.13.0-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//convmv-1.10-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//corewars-0.9.13-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//courier-authlib-0.59.3-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//courier-imap-4.1.3-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//courier-maildrop-2.0.4-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//courier-mta-0.55.1-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cowsay-3.03-5/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cplay-1.49-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cpudyn-1.0.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cpufreqd-2.2.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cpufrequtils-002-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//crimson-0.5.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//crypto++-5.5.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cscope-15.6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cssed-0.4.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//csup-20060318-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ctags-5.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//culmus-0.101-7/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cups-1.3.3-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cups-pdf-2.4.6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//curl-7.17.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cvs-1.11.22-6/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cvsfs-1.1.9-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cvsps-2.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cvsup-16.1h-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cyrus-sasl-plugins-2.1.22-6/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//d4x-2.5.7.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//dailystrips-1.0.28-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//damageproto-1.1.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//dvgrab-2.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//easysock-0.3.0-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//easytag-2.1.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eboard-1.0.4-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ecasound-2.4.5-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ecl-0.9i-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eclipse-3.2.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eclipse-cdt-3.1.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eclipse-ecj-3.3-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ed2k-gtk-gui-0.6.4-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//edb-1.0.5-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eel-2.20.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//efax-0.9-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eject-2.1.5-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ekiga-2.0.11-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//elinks-0.11.3-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//emacs-22.1-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//emboss-3.0.0-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//emelfm2-0.3.5-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//emerald-0.2.1-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//emerald-themes-0.2.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//emovix-0.9.0-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//enblend-3.0-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//enchant-1.3.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//enigma-1.04-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//enlightenment-0.16.8.10-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//enscript-1.6.4-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eog-2.20.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//epdfview-0.1.6-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//epic4-2.6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//epiphany-2.20.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//epiphany-extensions-2.20.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//epplet-base-0.10-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eric-3.9.5-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//erlang-R11B.5-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//esd-0.2.38-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eterm-0.9.4-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//etherape-0.9.7-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ethstatus-0.4.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ethtool-6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//ettercap-NG_0.7.3-6/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eventlog-0.2.5-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//evieext-1.0.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//evilwm-1.0.0-1.1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//evince-2.20.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//evms-2.5.5-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//evolution-2.12.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//evolution-data-server-1.12.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//evolution-exchange-2.12.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//evolution-sharp-0.14.0.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//exim-4.68-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//exiv2-0.14-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//exo-0.3.2-5/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//expat-2.0.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//vips-7.12.5-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//wipe-2.2.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//guichan-0.7.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//guifications-2.14-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//gutenpy-0.3.0-5/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//gwenhywfar-2.6.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//gwget-0.99-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hacburn-0.3.5-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hal-cups-utils-0.6.13-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//happs-0.8.4-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hardinfo-0.4.2.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hardware-monitor-1.4-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hashcash-1.22-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//haskell-binary-0.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//haskell-x11-1.2.3-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//haskell-x11-extras-0.4-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hatari-0.95-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//haxml-1.13.2-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hddtemp-0.3.beta15.36-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hearse-1.5-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hedgewars-0.9.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//helixplayer-1.0.8-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hevea-1.10-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hex-a-hop-20070705-6/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hexter-0.6.1-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hgsvn-0.1.4-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//hlist-darcs-20070629-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//homebank-3.5-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//klogwatch-2.0.3-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//ltris-1.0.11-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//man2texi-0.01-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//moinmoin-1.5.8-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//moreutils-svn-81-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//mpdcon-1.1.99-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//nautilus-actions-1.4.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//openthreads-1.5-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//perl-crypt-cbc-2.22-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//perl-text-charwidth-0.04-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//perl-text-markdown-1.0.3-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//perl-universal-can-1.12-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//perl-universal-require-0.11-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//perl-www-mechanize-1.30-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//perl-www-sms-0.09-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//ruby-gtksourceview-0.16.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//smplayer-0.5.21-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//sofia-sip-1.12.6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//texlive-formatsextra-doc-2007.1-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//texlive-games-doc-2007.1-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//weechat-cvs-20070805-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//xfce4-xkb-plugin-svn-3163-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//xfmedia-svn-26105-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/community//xfwm4-svn-26127-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//aalib-1.4rc5-4/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//acpid-1.0.6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//agg-2.5-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//alltray-0.69-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//alsa-lib-1.0.14-5/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//alsa-utils-1.0.14-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//amarok-base-1.4.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//amarok-engine-xine-1.4.7-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cabextract-1.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cairo-1.4.10-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cairo-perl-1.041-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cdrdao-1.2.2-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cdrkit-1.1.6-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//chmlib-0.39-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//codecs-20061022-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//compositeproto-0.4-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cpudyn-1.0.1-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cpufrequtils-002-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cups-1.3.3-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//curl-7.17.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cvs-1.11.22-6/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cvsup-16.1h-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//cyrus-sasl-plugins-2.1.22-6/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//damageproto-1.1.0-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//eject-2.1.5-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//esd-0.2.38-3/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//evieext-1.0.2-1/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//exiv2-0.14-2/desc: No such file or directory
    error: could not open file /var/lib/pacman/extra//expat-2.0.1-1/desc: No such file or directory
    As a test I tried doing a pacman -S to reinstall one of those packages, and it gave the same error as well as complaining about the missing depends file. After I told it to install the already up to date package pacman kept saying that the package was corrupted. Any way to fix this short of doing a reinstall?

    These files have to do with the pacman database of all packages, not of installed packages (which are in /var/lib/pacman/local). I would suggest trying 'pacman -Syy' to clean that up, and if you still have the same sorts of errors afterwards that would suggest quite annoying disk corruption.

  • All my .psd files are corrupt after a pc restart...

    What the hell?!?! What could have caused it and is there any chance I can restore anything ... Everything on my pc seems ok but the psd files ...
    "Could not complete your request because it is not a valid Photoshop document."
    This is what I get
    I am using Photoshop CC on Windows 7

    It sounds unlikely that multiple PSD files have become corrupted.  My first thought when seeing the thread title was a bad Windows FAT (File Allocation Table) but even that sounds unlikely to only affect PSD files.  So I'd be looking at the common denominator, which is Photoshop.  Have you tried creating a new document, and saving and reopening?
    I think I'd try opening the files with another app like Irfanview, or just reinstalling Photoshop.  Do you have the files backed up?

  • Boot file not changed after XP was removed!!

    I installed XP on my macbook pro but when i removed the XP partition, the boot file was not changed. Every time i restart the computer it boots into the windows partition and tells me that no drive was found. In order to boot in OS X i have to hold the option key and choose the OS X drive which is the only one that appears on the screen... Any one know how to fix this problem?
    Alex

    You might want to reread the setup guide; you can use Startup Disk preference pane to establish a default boot disk.
    Doug

Maybe you are looking for

  • Adobe Premiere CC crashes every ~10 seconds

    Hi, today I installed Premiere CC and After Effects CC on a computer at work. Here are the specs of the computer. BIOS: BIOS Date: 01/10/13 08:20:50 Ver: A12.00 Processor: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (8 CPUs), ~3.4GHz Memory: 8192MB RAM D

  • File adapter - APPEND not working

    Hi Everyone, I want to append a text file on the target side. I am using FCC on the receiver side and the file construction mode is "APPEND" and file type is "TEXT". When i test my scenario, the file gets created for the first time and for the next t

  • 60 GB music Ipod Vs 60GB video Ipod

    Hi everibody, I am planning to buy a video Ipod and I already own a 60 GB music only Ipod. I have a doubt about the possibility of synchronysing of the two Ipods. I will be using the same computer and the same data base to do so. Will I experience pr

  • External class call in a XSL document ?

    I'd like to use Xalan package to transform XML documents thanks to XSL documents. I've seen how to use these classes in the XML Tutorial, but does anyone know whether it is possible or no to define customized call in a XSL document ? Exemple <xsl:tem

  • Photoshop CS6 UNWORKABLE on Mavericks!

    Hello fellow "apples" I've a late 2012 Macbook Pro (non retina) with 2,6 GHz i7 8GB Ram and 750HDD Since i've updated the OS to mavericks yesterday I've been struggling with photoshop CS6, it can work just fine for a minute to completely freeze for a