File system error on IX4-300d

Hi all. I got message "File system error. You must perform file system check". How can I do it?
Sorry for my English.

Hi. Can you tell me how to run fsck command. I have the same problem with the drive and I get the same error :
"The file system on your Lenovo ix4-300d has errors and needs to be checked".
I have 2 Hard disks both of 3 TB in simple configuration. The suggestion of file system check did not work. I tried your method of SSH into the hard disk. However I cannot complete the process as I got the following error:
root@DataVault:/# fsck -y /dev/sdb2
fsck 1.42.5 (29-Jul-2012)
e2fsck 1.42.5 (29-Jul-2012)
/dev/sdb2 is in use.
e2fsck: Cannot continue, aborting.
This is consistent with sdb1, sda1 & sda2
Also I have provided the parted -l info below:
root@DataVault:/# parted -l
Model: ATA ST3000DM001-1CH1 (scsi)
Disk /dev/sda: 3001GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start   End     Size    File system Name     Flags
1      33.6MB 21.5GB 21.5GB               primary
2      21.5GB 3001GB 2979GB               primary
Model: ATA ST3000DM001-9YN1 (scsi)
Disk /dev/sdb: 3001GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start   End     Size    File system Name     Flags
1      33.6MB 21.5GB 21.5GB               primary
2      21.5GB 3001GB 2979GB               primary
Model: SanDisk Cruzer (scsi)
Disk /dev/sdc: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start   End     Size    Type     File system Flags
1      16.4kB 16.0GB 16.0GB primary fat32        lba
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/9aee462_vg-lv3a09ce04: 5958GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End     Size    File system Flags
1      0.00B 5958GB 5958GB ext3
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/md0_vg-vol1: 17.2GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End     Size    File system Flags
1      0.00B 17.2GB 17.2GB ext3
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/md0_vg-BFDlv: 4295MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End     Size    File system Flags
1      0.00B 4295MB 4295MB ext2
Error: /dev/mtdblock0: unrecognised disk label
Error: /dev/mtdblock1: unrecognised disk label
Error: /dev/mtdblock2: unrecognised disk label
Error: /dev/mtdblock3: unrecognised disk label
Error: /dev/mtdblock4: unrecognised disk label
Error: /dev/mtdblock5: unrecognised disk label
Error: /dev/mtdblock6: unrecognised disk label
Error: /dev/md0: unrecognised disk label
Error: /dev/md1: unrecognised disk label
root@DataVault:/#
Any help would be greatly appreciated.
Thanks in advance

Similar Messages

How to fix file system error 56635 in windows 8.1

heelo pls help me to fix this problem i cant install any on my laptop.
file system error 56635 is showing up wen i install my kaspersky 2015

Hello Jay,
The current forum is for developers. I'd suggest asking non-programming questions on the
Office 2013 and Office 365 ProPlus - IT Pro General Discussions forum instead.

File system error when trying to connect to a network share

I am trying to set up a BB Curve (9350) to access a network share (Applications/Files/GoTo) and am getting a message "File system error". It does not ask for user/domain/password. I have this working on another BB Curve. When it works, it prompts for User Name, Domain, and Password. Is there a setting on the BES that allows some phones to access the network, but not others?
Thank you.
JerryK

Sometimes the devices can get pushed additional policies on accident basically, I would call the carrier first so you guys don't get charged for support and have them transfer you over to blackberry tech support. If you have access to the server and the device they might be able to figure out whats goin on.

File system error message

When I try to delete a media file it says file system error. Anyone know what this is and how to fix it? Thank you!

First off, your question really doesn't belong in this topic; you should post in something more appropriate.
That said ...
Where is the file located? On a microSD card or on the BB. How are you trying to delete it?
Message Edited by AndyDufresne on 09-10-2008 11:39 PM
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/

File system error: The record ID is incorrect. Physical file: . Logical file:

Hi,
I face this error message when I try to 'process update' a dimention, sometime it works but sometime it failed with the error below:
Description: File system error: The record ID is incorrect. Physical file: . Logical file: .
My environment: Window Server 2008 R2+SQL Server 2008 R2.
Note: this issue can be resolved by full cube process, but I can't to that every time if it failed, just want to know what happen at backend of SSAS, It block me neary 2 week without any finding, really appreciate that someone can help on this.
I have do some research with google, I think the root cause here is not TopCount function(It may be a problem with SQL Server2005), also not the size limitation of 4GB size of .astore file.(I check the size of my cube under 'Data\XXX.db\' folder, which only
have few MB size).
Thanks,
Tom

Hi Tom,
Here is a microsoft fix
FIX: "File system error" occurs when you try to run a process update operation on a dimension in Microsoft SQL Server 2008 Analysis Services and in Microsoft SQL Server 2008 R2 Analysis Services
In your acenario, in order to fix this issue, please apply the latest Cumulative update and Service Pack according to your SQL Server version. Besides, there are two workarounds in that fix, plese try it and check if it works or not.
http://support.microsoft.com/default.aspx?scid=kb;en-US;2276495
Regards,
Charlie Liao
TechNet Community Support

File system error while creating a virtual server

Hi
I get the following error when I create a virtual server:
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)
The admin server is owned by root but the instance that I want to create should be owned by webservd - like the other instance that is installed.
this error shows that web server is unable to create a directory under SUNWwbsvr folder. Any hints pls?
thanks!

sorry this error is while creating a new server instance - not a new virtual server.
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)

File System error while restoring a backup from analysis server to another

Hi
I have restored an analysis database backup to from server 1 (sql server 2008) to server 2(sql 2008) and its working fine
and now am trying to restore another database from analysis server server 3 (sql 2005) to server 2 (sql 2008 )but its giving error that
File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etc

Hi Maverick,
According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
step, please refer to the link below.
http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
Regards,
Charlie Liao
TechNet Community Support

Analysis Services failing to Start . File system error: Error occurred during the creation of directory

Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SG

Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway

File System Error

Hi guys I reali need help with my bb 8520...had it 4 almst 4mnths now been workin fine all the time but now suddenly I can't download anythin orh take pix at all....if I do any of those it will show me file system error nd cancel my download nd with the pix itl save bt won't open in my gallery....I need help what should I do I'm out of options

Hi,
First check what is the dm-0 disk on your server:
# ls -l /dev/disk/by-id/
lrwxrwxrwx 1 root root 10 Feb 1 22:12 dm-name-vg_rh6u4-lv_root -> ../../dm-0
In my case: it is the partition vg_rh6u4-lv_root which is mounted on /
# df -h
Filesystem                    Size Used Avail Use% Mounted on
/dev/mapper/vg_rh6u4-lv_root   41G   33G 6.0G 85% /
Then, it is so good to check the file system with the fsck, (The command fsck can check unmounted partition)
Note:
     - If the partition contains Oracle database, then make a full backup on an other partition or shutdown the database and copy all your data.
     - Force the check during the boot of your Server by modifying the file /etc/fstab.
Best regards

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

No mountable File System error while installing Flash Player

Hi all,
i've been having a no mountable file system error while installing Flash Player. At first i thought it was a problem with the download but i've tried many times and still have the same error when installing the player. I've attached a screenshot of the error message.
Hopefully someone can shed some light. I'm using a 2012 Mac Mini running Mountain Lion on a Fusion Drive.

elliott777 wrote:
Thank you for your help! I don't have the capabilities:(
you don't have what capabilities? to download?

HT1199 I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

Did you format the drive for Mac use before you tried to use it as a backup drive?
Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app.

Hepl !!! "File system error" on the Muvo TX FM 128

every time, I turn on my MP3 player, display "file system error" on the monitor and then it turn off. I was download firmware latest (ver. .9.0) to reinstall flow introduction. But it'sdidn't complete, and display error on the board: "please put device in recovery mode before running firmware update", althought I was connect mp3 player to PC. I was also format mp3 player several time before, but have no changed !Please tell me how the way to solve this problem!?

Recovery Mode is needed as per the message.
Download and install drivers.<
Press and hold Play button while connecting to PC.<
Keep holding Play until New Hardware Wizard starts.<
Complete driver installation.<
The run firmware upgrade.<
During upgrade select Format Data Area check box.<
PB

File system error on MuVo TX

After I transfer files to my MuVo TX FM, and I try to play the music, I get a message "File System Error. I have followed the instructions and formatted again, but I still get the message. Any suggestions?

This is a post by Surfn, which helped me:
I've had a similar problem with MuVo TX that is about one year old. When I let the battery run down low, I started having the problem. First what didn't work, then what worked:
-Replacing the battery didn't work.
2-Trying to turn it on gave "File System Error."
3-I am on Windows 2000 OS. When I tried to click on the removable dri've in Windows explorer, it caused that program to freeze up.
4-When I tried to double-click on "My Computer" and right-click on the removable dri've and select "format," nothing happened.
5-When I tried to download the latest firmware and install (with the device plugged into the USB port), after a long time of searching it said that no devices were found.
This is what WORKED for me: I downloaded the firmware NOMAD MuVo TX Audible Firmware Upgrade .0.05 from http://www.nomadworld.com/downloads/drivers When I ran this self-extracting executable, it gave some comment to the effect of "searching for devices." At this moment I held down the pause/play button and plugged the MuVo into my USB port and continued to hold the button down for another 5 to 20 seconds. This was how I was able to finally get it to find the device. At this point I was able to follow the rest of the instructions that were posted previously: check/tick the 'Format Data Area' in the dialog box and click on 'Start'.
I think I ran the firmware executable a second time without checking 'Format Data Area' in order to make sure the Firmware was installed on the newly formatted flash dri've, but I might not have needed to do that last step.
This has gotten me up and running where none of the other suggestions worked for me. I hope this works for you.
I am happy to say that my muvo is working fine now.
The only thing that I didn't do exactly like surfn described is that I didn't
press the play/pause button during the detection of the mp3 player.
I tried pressing the button, but the player was not detected, so I decided
not to press it and see if it works.
The player was detected, I selected the "Format data area" option, and pressed
start. It worked like a charm.

File System Error on Muvo Slim 51

Hello. Up until a couple of months ago my player was working fine...until the dreaded file system error message.
I have a macbook and I have only seen solutions for this problem using Windows platform.
Can anyone offer any advice... the player is not even showing up in my disk utility when I plug it in.
Thank you!

Hi Jason. I forgot to mention this. Windows XP does not format the player. As a matter of fact, the context menu that pops up when right-clicking the storage icon (representing the player) in My Computer pops after a minute or two. Something must be wrong. When I look at the Properties of the storage representing the player, it's capacity is nil with file system as <EM>Raw. </EM>I tried Partition Magic 8 in a friend's pc but it seems that external storage is not recognized or at least I don't know how to use the software. My analysis is that this is similar to the case when you partition a hard dri've during installation of Windows XP Pro (at least on my experience) and forget to specify the file system of the other partitions. Those partitions wont be visible in the disk management tools of windows. I will try your suggestion and update this thread on my progress.
Thanks very much

File system error on IX4-300d

Similar Messages

Maybe you are looking for