File system error while booting up :(

Hi , I hard reset my kdemod 4 desktop this morning and during reboot the filesystem check failed with some msg abot cant find inode or somethinf, can I fix the file system, please help me!:(

oh thanks funkyou. I will try that when I go home.
It got fixed , I did fsck using slax USB drive..;)
Thanks
Last edited by venky80 (2008-07-17 18:09:35)

Similar Messages

  • No mountable File System error while installing Flash Player

    Hi all,
    i've been having a no mountable file system error while installing Flash Player.  At first i thought it was a problem with the download but i've tried many times and still have the same error when installing the player.  I've attached a screenshot of the error message.
    Hopefully someone can shed some light.  I'm using a 2012 Mac Mini running Mountain Lion on a Fusion Drive.

    elliott777 wrote:
    Thank you for your help! I don't have the capabilities:(
    you don't have what capabilities? to download?

  • File system error while creating a virtual server

    Hi
    I get the following error when I create a virtual server:
    File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)
    The admin server is owned by root but the instance that I want to create should be owned by webservd - like the other instance that is installed.
    this error shows that web server is unable to create a directory under SUNWwbsvr folder. Any hints pls?
    thanks!

    sorry this error is while creating a new server instance - not a new virtual server.
    File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)

  • File System error while restoring a backup from analysis server to another

    Hi
    I have restored an analysis database backup to from server 1  (sql server 2008) to server 2(sql 2008) and its working fine 
    and now am trying to restore another database from analysis server server 3 (sql 2005) to  server 2 (sql 2008 )but its giving error that 
    File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etc

    Hi Maverick,
    According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
    In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
    step, please refer to the link below.
    http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
    Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
    http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • File system error while opening applications in jdeveloper

    I am facing issue while creating new application in jdev. Getting error An error occured creating the application.Check file system permissions. I am admin of my server and I have admin rights for my system.
    I am using 11.1.1.6.0 version of jdev and windows xp os.
    Thanks in advance.

    Hi,
    This is your private PC?
    Can you verify it's not permissions issues?
    Try run the jdev as an admin (right click-run as). Also try to manually create folder in the target location.
    Arik

  • Error c000021a : {fatal system error} while booting laptop M30 series

    I get the following error when starting my laptop.
    "Stop: c00021a {fatal system error} The windows logon process system process terminated unexpectedly with a status of 0x00000080 (0x00000000 0x00000000)
    The system has been shut down"
    I have recovery CD provided to at the time of purchase. I have some data which I need to recover. If anyone knows resolution to this problem , please let me know the procedure.
    Thanking you in advance.
    -YG

    Hi,
    I tried the link said above but didnt help. I was still getting the same error.
    What I tried is loading a OS of different vesion (in my case XP Professional). This loaded succesfully and I could recover some of my data. For some data, I am getting access rights error.
    I am finding out if there is any way I can fully recover my data.
    Thanks for your help,

  • BSOD Error while booting Thinkpad L440

    Link to image
    Hi All, 
    I'm getting a BSOD Error while booting my Lenovo Thinkpad L440 system. 
    Please help.
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

    Hello,
    To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
    Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Error while booting maverick

    error while booting maverick

    The most likely causes of this error are:
    1) Failing to execute tmloadcf after updating the UBBCONFIG file.
    2) Failing to set TUXDIR correctly in the UBBCONFIG file.
    3) Failing to set TUXCONFIG, PATH, or
    LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
    enviroment.when executing tmboot or tlisten.
    You should verify that your environment is set correctly and you should
    execute tmunloadcf to see the contents of the configuration file that has
    been loaded.
    Ed
    <Kaustubh Deoghare> wrote in message news:[email protected]..
    Hello,
    I am getting following error while booting tuxedo
    exec TMS_ORACLE8I -A :
    TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
    kgsmp789_compat_
    CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
    Though I have installed Oracle9i, in ubbconfig it is still taking
    TMS_ORACLE8I and hence trying to access Oracle8i library files.
    Pl suggest in this regard
    Thanx in advance

  • Getting BSOD error while booting

    Hi,
    I am getting BSOD error while booting using bootable pendrive.
    Could you guys please provide the possible solution
    Regards,
    Chandan

    Hello,
    To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
    Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Pcipsy error while booting

    I have installed a PCI audio card and its driver. While booting
    I am getting following error
    pcipsy: WARNING: pcipsy0: ino 23 is invalid
    pcipsy: WARNING: pcipsy0: ino 10 is invalid
    Can any one tell me what is causing this pci error?
    Thanks

    The most likely causes of this error are:
    1) Failing to execute tmloadcf after updating the UBBCONFIG file.
    2) Failing to set TUXDIR correctly in the UBBCONFIG file.
    3) Failing to set TUXCONFIG, PATH, or
    LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
    enviroment.when executing tmboot or tlisten.
    You should verify that your environment is set correctly and you should
    execute tmunloadcf to see the contents of the configuration file that has
    been loaded.
    Ed
    <Kaustubh Deoghare> wrote in message news:[email protected]..
    Hello,
    I am getting following error while booting tuxedo
    exec TMS_ORACLE8I -A :
    TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
    kgsmp789_compat_
    CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
    Though I have installed Oracle9i, in ubbconfig it is still taking
    TMS_ORACLE8I and hence trying to access Oracle8i library files.
    Pl suggest in this regard
    Thanx in advance

  • USB error while booting

    I'm getting this error while booting:
    Waiting for UDev uevents to be processed
    [ 3.631701] usb 1-1.1: unable to read config index 0 descriptor/all
    [ 3.631811] usb 1-1.1: can't read configurations, error -32
    [ 3.643141] hub 1-1:1.0: unable to enumerate USB device on port 1
    I saw other thread in this forum but i can't find any solutions because I have no USB plugged in. Any suggestions?
    Last edited by quiro91 (2012-06-26 09:17:08)

    rc.conf -> http://pastebin.com/eJTXVt1L
    mkinitcpio.conf -> http://pastebin.com/u90UQ8kt
    udev is actually after base. I'm going to try linux-lts now, I'll let you know, and obviously thanks for your help
    EDIT: using lts kernel, I rebooted 5 times and everything works fine, no error message at all
    DSpider wrote:
    Post these files (preferably using pastebin.com):
    /etc/rc.conf
    /etc/mkinitcpio.conf
    "udev" should be after "base". For example:
    HOOKS="base udev autodetect pata scsi sata usbinput filesystems fsck"
    Then regenerate your initramfs:
    # mkinitcpio -p [your linux preset, since you're using linux-ck... I don't know]
    For the kernel from the [core] repo, it's:
    # mkinitcpio -p linux
    Speaking of kernels, does it happen with linux-lts too?
    Last edited by quiro91 (2012-06-26 15:52:15)

  • Installing Arch Linux on USB key: error while booting

    Hello,
    first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
    So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
    Waiting 10 seconds for device /dev/sdc/
    Root device '/dev/sdc' doesn't exist. Attempting to create it.
    ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    /bin/sh: Can't contact tty; job control turned off
    [ramfs /]#
    To summarize I'll show you my conf files that could help you to resolve my problem:
    /etc/fstab.conf
    /dev/sdc1 /boot ext2 defaults 0 1
    /dev/sdc2 / ext3 defaults 0 1
    /dev/sdc3 /home ext3 defaults 0 1
    So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
    I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
    /etc/mkinitcpio.conf
    HOOKS="base udev usb autodetect pata scsi sata filesystems"
    I've added to here, "usb" to the hooks
    installed GRUB on my sdc, here is the menu.ist:
    # (0) Arch Linux
    title Arch Linux (USB)
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/sdc ro vga=773
    initrd /kernel26.img
    So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
    I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
    I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.

    1. What I did is re-installing entirely from my installation disk or USB to test out different setting in  my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
    2. Yes, same error.
    3. Tested out by-id/by-path and uuid = no difference
    4. Didn't know about larch, it seems to be a nice tool, I'll check it out

  • File System Error

    Hi guys I reali need help with my bb 8520...had it 4 almst 4mnths now been workin fine all the time but now suddenly I can't download anythin orh take pix at all....if I do any of those it will show me file system error nd cancel my download nd with the pix itl save bt won't open in my gallery....I need help what should I do I'm out of options

    Hi,
    First check what is the dm-0 disk on your server:
    # ls -l /dev/disk/by-id/
    lrwxrwxrwx 1 root root 10 Feb  1 22:12 dm-name-vg_rh6u4-lv_root -> ../../dm-0
    In my case: it is the partition vg_rh6u4-lv_root which is mounted on /
    # df -h
    Filesystem                    Size  Used Avail Use% Mounted on
    /dev/mapper/vg_rh6u4-lv_root   41G   33G  6.0G  85% /
    Then, it is so good to check the file system with the fsck, (The command fsck can check unmounted partition)
    Note:
         - If the partition contains Oracle database, then make a full backup on an other partition or shutdown the database and copy all your data.
         - Force the check during the boot of your Server by modifying the file /etc/fstab.
    Best regards

  • Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

    So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on. 
    Here are the list of errors I can remember.
    Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
    Specs:
    Operating System
    Windows 8.1 Pro 64-bit
    CPU
    AMD Athlon II X2 250
    35 °C
    Regor 45nm Technology
    RAM
    6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
    Motherboard
    ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
    40 °C
    Graphics
    SyncMaster (1440x900@60Hz)
    SAMSUNG (1440x900@60Hz)
    ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
    Storage
    698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

    Adam
    These are Related to
    atikmdag.sys ATI Radeon Kernel Mode Driver.  Yours is 2+ years old.  I would update to the newest driver available.
    Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    ************* Symbol Path validation summary **************
    Response Time (ms) Location
    Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 8 Kernel Version 9600 MP (2 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
    Machine Name:
    Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
    Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
    System Uptime: 0 days 0:08:48.334
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
    *** WARNING: Unable to verify timestamp for atikmdag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
    Probably caused by : atikmdag.sys ( atikmdag+70d73 )
    Followup: MachineOwner
    0: kd> !analyze -v
    * Bugcheck Analysis *
    SYSTEM_SERVICE_EXCEPTION (3b)
    An exception happened while executing a system service routine.
    Arguments:
    Arg1: 00000000c0000005, Exception code that caused the bugcheck
    Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
    Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
    Arg4: 0000000000000000, zero.
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP:
    atikmdag+70d73
    fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
    CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
    rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
    rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
    rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
    r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
    r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
    r14=0000000000000000 r15=ffffcf8004734470
    iopl=0 nv up ei ng nz na po nc
    cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
    atikmdag+0x70d73:
    fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
    Last set context:
    rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
    rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
    rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
    r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
    r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
    r14=0000000000000000 r15=ffffcf8004734470
    iopl=0 nv up ei ng nz na po nc
    cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
    atikmdag+0x70d73:
    fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
    Resetting default scope
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
    BUGCHECK_STR: 0x3B
    PROCESS_NAME: csrss.exe
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
    STACK_TEXT:
    ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
    ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
    ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
    ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
    FOLLOWUP_IP:
    atikmdag+70d73
    fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
    SYMBOL_STACK_INDEX: 0
    SYMBOL_NAME: atikmdag+70d73
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: atikmdag
    IMAGE_NAME: atikmdag.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
    STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
    FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
    BUCKET_ID: 0x3B_VRF_atikmdag+70d73
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
    FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
    Followup: MachineOwner
    Wanikiya and Dyami--Team Zigzag

  • Hepl !!! "File system error" on the Muvo TX FM 128

    every time, I turn on my MP3 player, display "file system error" on the monitor and then it turn off. I was download firmware latest (ver. .9.0) to reinstall flow introduction. But it'sdidn't complete, and display error on the board: "please put device in recovery mode before running firmware update", althought I was connect mp3 player to PC. I was also format mp3 player several time before, but have no changed !Please tell me how the way to solve this problem!?

    Recovery Mode is needed as per the message.
    Download and install drivers.<
    Press and hold Play button while connecting to PC.<
    Keep holding Play until New Hardware Wizard starts.<
    Complete driver installation.<
    The run firmware upgrade.<
    During upgrade select Format Data Area check box.<
    PB

Maybe you are looking for