File system for SAP Ecc 6.0 with db2 on AIX

Hello Everyone
Pleaese suggest the file system size which is to created before installation of sap ecc6.0 sr3 on Aix with DB2.
Thanks

find this
PRD
df -M
Filesystem    Mounted on         512-blocks      Free %Used    Iused %Iused
/dev/hd4      /                     4194304   2008384   53%     2438     2%
/dev/hd2      /usr                 33554432  24364192   28%    48662     2%
/dev/hd9var   /var                  8388608   7880328    7%      580     1%
/dev/hd3      /tmp                  8388608   8342704    1%      123     1%
/dev/fwdump   /var/adm/ras/platform     262144    261448    1%        4     1%
/dev/hd1      /home                 2097152   1928856    9%      131     1%
/proc         /proc                       -         -    -         -     -
/dev/hd10opt  /opt                  4194304   2851592   33%     6285     2%
/dev/fslv12   /instcd1             41943040   9293200   78%    15850     2%
/dev/fslv00   /sapmnt/P11          10485760   8752544   17%     5955     1%
/dev/fslv01   /usr/sap/P11         10485760   8244400   22%     1319     1%
/dev/fslv02   /db2/db2p11           4194304   3100248   27%     3941     2%
/dev/fslv03   /db2/P11/log_dir     20971520  18346264   13%       26     1%
/dev/fslv04   /db2/P11/log_dir2    20971520  18346424   13%       26     1%
/dev/fslv05   /db2/P11/db2dump      4194304   3422024   19%       23     1%
/dev/fslv06   /db2/P11/sapdata1   272629760 220914312   19%      106     1%
/dev/fslv07   /db2/P11/sapdata2   272629760 220914000   19%      106     1%
/dev/fslv08   /db2/P11/sapdata3   272629760 220914304   19%      106     1%
/dev/fslv09   /db2/P11/sapdata4   272629760 220914280   19%      106     1%
/dev/fslv10   /db2/P11/saptemp1    10485760  10483352    1%       47     1%
/dev/fslv11   /db2/P11/mirrlog     20971520  20967456    1%        7     1%
/dev/fslv13   /db2/P11/archlog     94371840  46774984   51%      380     1%
/dev/fslv14   /sap/auditlog        12582912  12311392    3%       51     1%
*****rpd11:/usr/sap/trans /usr/sap/trans       33554432  11883968   65%     5738

Similar Messages

  • File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2

    Hello,
    We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
    All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
    But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
    Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
    If anyone able to help me with required Solaris file system. it will be great help.
    Please let me know if there is any query.
    Thanks.

    > All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
    > But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
    Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
    > Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
    So you'd need to read the installation guides
    Markus

  • SAP ECC 6.0 with DB2 on winds 2008r2 using VMware

    Dear All,
    Request you to guide me in giving some information related to
    -compatibility
    -best practice
    -official guidelines for SAP installation.
    We have purchased SAP ECC 6.0 with DB2 as RDBMS.
    Thanks in advance.
    by
    Harika N

    I got information
    Note 1130801 - DB2 LUW, DB2 z/OS release for VMware, XEN, and Hyper-V
    The usage of DB2 Version 9.1 for LUW, DB2 Version 9.5 for LUW, and DB2 9.7 for LUW on Windows and Linux (SUSE and RedHat) with VMWare, KVM, and XEN is permitted and supported by SAP and IBM.
    Kind regards,
    Harika N

  • Local file system for archive destination in RAC with ASM

    hi Gurus .
    I need an info.
    I have ASM file system in 2 node RAC.
    The client does not want to use flash recovery area.
    Can we use the archive destination as local file system rather than ASM.
    like /xyzlog1 for archvies coming from node 1 and /xyzlog2 for archive logs coming from node 2.
    Imortant thing is these two destinations are anot shared with each nodes.
    OS is solaris sparc 10.
    version is 10.2.0.2

    There is huge space in the storage.
    Pls tell me in general ho wdo you do this.
    Do we take and one disk from the storage and format it with local file system and share it among the 2 nodes?
    If so then that mount point will have same mount point name if we see it from other node... ..ryt
    In this scenario if one instance is down then from the same shared mount point which is on the same node(down) can apply archves?Here, Earlier you are using any ASM shared location for ARCHIVES ?
    if so you can add a CANDIDATE disk to your existing ARHCIVE disk group(shared).
    if not from LUN's after format, I.e. candidates based on that you can create a new DISK group(shared) according to your space requirements. THen you can assign to log_archive_dest_1 for both the nodes to single shared location(disk group)

  • What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

    Hi All,
    Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
    Thanks

    Hi Surya,
    Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
    1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
    From Shop floor:
    shop floor --> SAP MII --> ECC
    1. Use either Web service or fetch data from DB and pass data to BAPI's  for sending to ECC through BLS transaction.
    Regards,
    Praveen Reddy

  • Confusion with OCFS2 File system for OCR and Voting disk RHEL 5, Oracle11g,

    Dear all,
    I am in the process of installing Oracle 11g 3 Node RAC database
    The environment on which i have to do this implementation is as follows:
    Oracle 11g.
    Red Hat Linux 5 x86
    Oracle Clusterware
    ASM
    EMC Storage
    250 Gb of Storage drive.
    SAN
    As of now i am in the process of installing Oracle Clusterware on the 3 nodes.
    I have performed these tasks for the cluster installs.
    1. Configure Kernel Parameters
    2. Configure User Limits
    3. Modify the /etc/pam.d/login file
    4. Configure Operating System Users and Groups for Oracle Clusterware
    5. Configure Oracle Clusterware Owner Environment
    6. Install CVUQDISK rpm package
    7. Configure the Hosts file
    8. Verify the Network Setup
    9. Configure the SSH on all Cluster Nodes (User Equivalence)
    9. Enable the SSH on all Cluster Nodes (User Equivalence)
    10. Install Oracle Cluster File System (OCFS2)
    11.Verify the Installation of Oracle Cluster File System (OCFS2)
    12. Configure the OCFS2 (/etc/ocfs2/cluster.conf)
    13. Configure the O2CB Cluster Stack for OCFS2
    BUT, here after i am a little bit confused on how to proceed further. The next step is to Format the disk and mount the OCFS2, Create Software Directories... so and so forth.
    I asked my system admin to provide me two partitions so that i could format them with OCFS2 file system.
    He wrote back to me saying.
    *"Is what you want before I do it??*
    */dev/emcpowera1 is 3GB and formatted OCFS2.*
    */dev/emcpowera2 is 3GB and formatted OCFS2.*
    *Are those big enough for you? If not, I can re-size and re-format them*
    *before I mount them on the servers.*
    *the SAN is shared storage. /dev/emcpowera is one of three LUNs on*
    *the shared storage, and it's 214GB. Right now there are only two*
    *partitions on it- the ones I listed below. I can repartition the LUN any*
    *way you want it.*
    *Where do you want these mounted at:*
    */dev/emcpowera1*
    */dev/emcpowera2*
    *I was thinking if this mounting techique would work like so:*
    *emcpowera1: /u01/shared_config/OCR_config*
    *emcpowera2: /u01/shared_config/voting_disk*
    *Let me know how you'd like them mounted."*
    Please recommend me what i should convey to him so that i can ask him to the exact same thing.
    My second question is, as we are using ASM, for which i am gonna configure ASM after clusterware installation, should i install Openfiler??
    Pls refer the enviroment information i provided above and make recommendations.
    As of now i am using Jeffery Hunters guide to install the entire setup. You think the entire install guide goes well with my enviroment??
    http://www.oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi.html?rssid=rss_otn_articles
    Kind regards
    MK

    Thanks for ur reply Mufalani,
    You have managed to solve half part of my query. But still i am stuck with what kind of mount point i should ask the system admin to create for OCR and Voting disk. Should i go with the mount point he is mentioning??
    Let me put forth few more questions here.
    1. Is 280 MB ok for OCR and voting disks respectively??
    2. Should i ask the system admin to create 4 voting disk mount points and two for ocr??
    3. As mentioned by the system admin.
    */u01/shared_config/OCR_config*
    */u01/shared_config/voting_disk*
    Is this ok for creating the ocr and voting disks?
    4. Can i use OCFS2 file system for formating the disk instead of using them as RAW device!!?
    5. As u mentioned that Openfiler is not needed for Configuring ASM... Could you provide me the links which will guide me to create partition disks, voting disks and ocr disks!! I could not locate them on the doc or else were. I did find a couple of them, but was unable to identify a suitable one for my envoirement.
    Regards
    MK

  • Btrfs with different file systems for different mount points?

    Hey,
    I finally bought a SSD, and I want to format it to f2fs (and fat to boot on UEFI) and install Arch on it, and in my old HDD I intend to have /home and /var and  try btrfs on them, but I saw in Arch wiki that btrfs "Cannot use different file systems for different mount points.", it means I cannot have a / in f2fs and a /home in btrfs? What can I do? Better use XFS, ZFS or ext4 (I want the faster one)?
    Thanks in advance and sorry my english.

    pedrofleck wrote:Gosh, what was I thinking, thank you! (I still have a doubt: is btrfs the best option?)
    Just a few weeks ago many of us were worrying about massive data loss due to a bug introduced in kernel 3.17 that caused corruption when using snapshots. Because btrfs is under heavy developement, this sort of thing can be expected. That said, I have my entire system running with btrfs. I have 4 volumes, two raid1, a raid0 and a jbod. I also run rsync to an ext4 partition and ntfs. Furthermore I make offline backups as well.
    If you use btrfs make sure you have backups and make sure you are ready to use them. Also, make sure you check sum your backups. rsync has the option to use checksums in place of access times to determine what to sync.

  • Disaster Recovery For SAP ECC 6.0 On Oracle

    Hi All,
    This is our infrastructure
    Windows 2003 Server
    SAP ECC 6.0
    Oracle 10
    Legato Networker Client / Library
    Actually our Backup Strategy is to do an Online Backup Every Night from monday to saturday. We want to test our backup by doing a Restore. We are assuming a complete loss of the system including hardware.
    What we do:
    1. Install the SAP System on a new host with the same hardware characteristic of the source system.
    2. Install & Configure the legato utility.
    3. Copy the E:\oracle\MIS\sapbackup\ directory from the source system to the test system.
    4. Them we put the database in mount mode.
    5. Execute the command: brrestore -b bdyxwoqv.fnf -m full  (bdyxwoqv.fnf-> Full Online Backup that was executed without problems).
    It gives the following errors:
    BR0386E File 'F:\ORACLE\MIS\SAPDATA2\SR3_10\SR3.DATA10' reported as not found by
    backup utility
    BR0386E File 'F:\ORACLE\MIS\SAPDATA3\SR3700_9\SR3700.DATA9' reported as not foun
    d by backup utility
    BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
    BR0279E Return code from 'backint -u MIS -f restore -i E:\oracle\MIS\sapbackup\.
    rdyybrzp.lst -t file -p E:\oracle\MIS\102\database\initMIS.utl': 2
    BR0374E 0 of 63 files restored by backup utility
    BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
    BR0231E Backup utility call failed
    BR0406I End of file restore: rdyybrzp.rsb 2008-10-01 17.45.19
    BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
    BR0404I BRRESTORE terminated with errors
    Since this is a new SAP system it never will find the SAPDATA files because they where on the source system and this is a new test system.
    We found the following note:
    96848 Disaster recovery for SAP R/3 on Oracle
    But this note is for SAP R/3 no for SAP ECC!
    It explain that you have to install your SAP system with the System Copy Method (is this the only way??).
    2.) Installation of the R/3 System
    The installation of SAP software contains the software installation of the database. The initial SAP database should be created again but the SAP data should not be loaded.
    Install the SAP system with the Oracle-specific system copy method, which is based on backup/restore. This method is described in the system copy guide for your Product/Release. Refer to Note 659509 for products that are based on Web AS.
    3.) Modification of the installation
    Above all, you must take into account the mounted file systems at the time of the loss. If necessary create new SAPDATA directories (mount points). These generally identify a disk or a logical storage area (logical volume).
    Are we working in the right way? maybe there is a formal procedure to do a Restore from an Online backup when you complete loss your system.
    Please some tips.
    Best Regards,
    Erick Ilarraza

    Hi Eric,
    Thanks a lot for your reply, I will follow the Note 96848 Disaster recovery for SAP R/3 on ORACLE point 5.
    5.) Restore profile and log files, as you sayed in case of disaster we will lost our "source" system.
    On the other hand to configure the legato client we take care of the name of the server, we configured the .sap, .cfg and .utl files so in theory the restore will be done on the new test system since we run the brrestore command from that system.
    Officially there is not a documentation from SAP to do a Restore from a Online Backup with SAP ECC, SAP Netweaver (ABAP / ABAP + Java). You only have the 96848 note??? I found the following information:
    http://help.sap.com/saphelp_nw70/helpdata/en/65/cade3bd0c8545ee10000000a114084/frameset.htm
    But there is not a official procedure like a System Copy Guide or Installation Guide.
    Best Regards,
    Erick Ilarraza

  • File system /usr/sap/hostctrl/work getting full rapidly

    Dears,
    Recently We have installed PI 7.1 on AIX 6.1 and database is Oracle 10g.
    Everything is working fine but we are facing one strange issue with it.
    Our file system  /usr/sap/hostctrl/work  is getting full again and again,I checked that there is a file dev_saphostexec that is taking maximum space,At present its of 15 GB.
    So please suggest how to solve this problem.
    Shivam

    Dear Mark,
    I have read OSS Note SAP Note 1031096 - Installing Package SAPHOSTAGENT.
    We are starting this week installing "Diagnostics Agent 711" on all SAP Netweaver 7.00 mananged system.
    I have read the "Diagnostics Agent 7.11- Setup Guide".
    In the "Installation Process", there is a step concerning the "Install the SAP Host Agent - Page 9".
    I have read the "Installation_SAPHOSTAGENT.pdf" guide.
    In the first page of this guide, it is written :
    "You only need to download and install the host agent in the following cases :
    - You want to centrally monitor a host that does not have an SAP component"
    - You want to perform an upgrade to the SAP NetWeaver 7.1 for an SAP NetWeaver component".
    In our productive envronment, we do have 2 clusters :
    Cluster 01 is composed of 2 nodes.
    Only "Databases" and "Central Services" of 5 SAP Systems are running.
    There is no CI or SA
    Cluster 02 is composed of 6 nodes.
    Only CI and AS of 5 productive systems are running on theses 6 nodes.
    My question :
    Do we have to install a SAP HOST AGENT in nodes of cluster 01 ?
    As written in "Downloading and Installating Package SAPHOSTAGENT" guide,
    SAP HOST AGENT only need to be install on "host that does not have an SAP component".
    Can we consider that "database" and "Central Service" are SAP Component or not ?
    Thanks in advance for your feedback
    Best regards
    P. Cuennet

  • How to create common file systems for both development & quality systems

    Hello Team
    Need some calrification & advise
    we are planning to install ECC6 with EHP5 on AIX7.1 with DB2 9.7 version on single physical server ( NO Virutal IP'S) for both development(SID : D10 & System number 20) & quality(SID : Q10 & System number 20) systems.And it will be running in single LPAR for development & quality systems.
    please advise me how can we create the below common file systems for both development & quality to avoid file permission & installation issues.
    /sapmnt/<SID>
    /usr/sap/
    /usr/sap/trans/
    /db2/IBM
    Thanks in advance & Regards
    BM

    Thanks you Juan for your response
    We are planning for seperate DB instance only.
    what could be the owner(UID) & group(GID) for the below file systems
    /sapmnt/
    usr/sap/
    usr/sap/trans
    Thanks in advance
    BM

  • Lucreate - „Cannot make file systems for boot environment“

    Hello!
    I'm trying to use LiveUpgrade to upgrade one "my" Sparc servers from Solaris 10 U5 to Solaris 10 U6. To do that, I first installed the patches listed on [Infodoc 72099|http://sunsolve.sun.com/search/document.do?assetkey=1-9-72099-1] and then installed SUNWlucfg, SUNWlur and SUNWluufrom the S10U6 sparc DVD iso. I then did:
    --($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207  -m /:/dev/md/dsk/d200:ufs
    Discovering physical storage devices
    Discovering logical storage devices
    Cross referencing storage devices with boot environment configurations
    Determining types of file systems supported
    Validating file system requests
    Preparing logical storage devices
    Preparing physical storage devices
    Configuring physical storage devices
    Configuring logical storage devices
    Analyzing system configuration.
    Comparing source boot environment <d100> file systems with the file
    system(s) you specified for the new boot environment. Determining which
    file systems should be in the new boot environment.
    Updating boot environment description database on all BEs.
    Searching /dev for possible boot environment filesystem devices
    Updating system configuration files.
    The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment; cannot get BE ID.
    Creating configuration for boot environment <S10U6_20081207>.
    Source boot environment is <d100>.
    Creating boot environment <S10U6_20081207>.
    Creating file systems on boot environment <S10U6_20081207>.
    Creating <ufs> file system for </> in zone <global> on </dev/md/dsk/d200>.
    Mounting file systems for boot environment <S10U6_20081207>.
    Calculating required sizes of file systems              for boot environment <S10U6_20081207>.
    ERROR: Cannot make file systems for boot environment <S10U6_20081207>.So the problem is:
    ERROR: Cannot make file systems for boot environment <S10U6_20081207>.
    Well - why's that?
    I can do a "newfs /dev/md/dsk/d200" just fine.
    When I try to remove the incomplete S10U6_20081207 BE, I get yet another error :(
    /bin/nawk: can't open file /etc/lu/ICF.2
    Quellcodezeilennummer 1
    Boot environment <S10U6_20081207> deleted.I get this error consistently (I ran the lucreate many times now).
    lucreate used to work fine, "once upon a time", when I brought the system from S10U4 to S10U5.
    Would anyone maybe have an idea about what's broken there?
    --($ ~)-- LC_ALL=C metastat
    d200: Mirror
        Submirror 0: d20
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 31458321 blocks (15 GB)
    d20: Submirror of d200
        State: Okay        
        Size: 31458321 blocks (15 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t1d0s0          0     No            Okay   Yes
    d100: Mirror
        Submirror 0: d10
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 31458321 blocks (15 GB)
    d10: Submirror of d100
        State: Okay        
        Size: 31458321 blocks (15 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t0d0s0          0     No            Okay   Yes
    d201: Mirror
        Submirror 0: d21
          State: Okay        
        Submirror 1: d11
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 2097414 blocks (1.0 GB)
    d21: Submirror of d201
        State: Okay        
        Size: 2097414 blocks (1.0 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t1d0s1          0     No            Okay   Yes
    d11: Submirror of d201
        State: Okay        
        Size: 2097414 blocks (1.0 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t0d0s1          0     No            Okay   Yes
    hsp001: is empty
    Device Relocation Information:
    Device   Reloc  Device ID
    c1t1d0   Yes    id1,sd@THITACHI_DK32EJ-36NC_____434N5641
    c1t0d0   Yes    id1,sd@SSEAGATE_ST336607LSUN36G_3JA659W600007412LQFN
    --($ ~)-- /bin/df -k | grep md
    /dev/md/dsk/d100     15490539 10772770 4562864    71%    /Thanks,
    Michael

    Hello.
    (sys01)root# devfsadm -Cv
    (sys01)root# To be on the safe side, I even rebooted after having run devfsadm.
    --($ ~)-- sudo env LC_ALL=C LANG=C lustatus
    Boot Environment           Is       Active Active    Can    Copy     
    Name                       Complete Now    On Reboot Delete Status   
    d100                       yes      yes    yes       no     -        
    --($ ~)-- sudo env LC_ALL=C LANG=C lufslist d100
                   boot environment name: d100
                   This boot environment is currently active.
                   This boot environment will be active on next system boot.
    Filesystem              fstype    device size Mounted on          Mount Options
    /dev/md/dsk/d100        ufs       16106660352 /                   logging
    /dev/md/dsk/d201        swap       1073875968 -                   -In the rebooted system, I re-did the original lucreate:
    <code>--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs</code>
    Copying.
    *{color:#ff0000}Excellent! It now works!{color}*
    Thanks a lot,
    Michael

  • Sql Server configuration requirements for SAP ECC 6.0

    Dear  All,
    I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
    For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
    Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0  with Oracle 10.2G which is the most common combination.I am having docs for this combination.
    I am installing ecc for the first time.
    *I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
    Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
    Thanks for your efforts.

    "Excuse me?
    What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
    Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
    You can use the software available here in the SDN to lean and study, that's why it's there.
    If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
    Do u understand what is legal or illegal? Have u read the license in full?
    The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
    Therefore there is nothing illegal about it.
    It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
    Since it being used for training purpose the above does not hold good.
    In fact it is SAP who is benefited in the long run bec' after a person learns it technology because  he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
    But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
    Edited by: coolmind26 on Jun 5, 2011 10:57 AM

  • SAP NetWeaver DNS Domain Name System for SAP?

    Hi all,
    I need to install SAP Netweaver 7:01 SR1 ABAP Trial Version.
    I use Microsoft Windows XP.
    During the installation process asks the DNS Domain Name System for SAP.
    What should I put in this field?
    Following is the result of ipconfig:
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix....:
    IP Address.....................................: 10.10.0.10
    Subnet Mask..................................: 255.255.255.0
    Default Gateway...........................:
    The name of my machine is solaris.
    In the host file put the following:
    10.10.0.10 solaris
    I very much appreciate if someone can help me.
    Viviane

    Hi Viviane,
    Please check this thread:
    Error:Reverse lookup of address failed:(NW7.01ABAPTrailVersionInstallation)
    http://en.wikipedia.org/wiki/Domain_name_system
    Hope it helps.
    Regards,
    Arun

  • File system /usr/sap/SID full

    Hello All,
    File system /usr/sap/SID getting full
    I have rese trace from SAP level but still file system rapidly increasing...
    below 2 files rapidly incrasing more space in file system
    hostname:sidadm 136> du -sk dev_server1
    31400   dev_server1
    hostname:sidadm 136> pwd
    /usr/sap/SID/DVEBMGS02/work
    more dev_server1
    [Thr 76096] *  LOCATION    SAP-Gateway on host xxxx / sapgw02
    [Thr 76096] *  ERROR       registration of tp SLD_NUC from host xxxx not allowed
    [Thr 76096] *
    TIME        Sat Mar 27 13:05:32 2010
    [Thr 76096] *  RELEASE     700
    [Thr 76096] *  COMPONENT   SAP-Gateway
    [Thr 76096] *  VERSION     2
    [Thr 76096] *  RC          720
    [Thr 76096] *  MODULE      gwxxrd.c
    [Thr 76096] *  LINE        3766
    [Thr 76096] *  COUNTER     60935963
    [Thr 76096] *
    [Thr 76096] *****************************************************************************
    [Thr 76096] *** ERROR => SAP_CMACCPTP3: wrong rqtype SAP_ACCPTP [r3cpic_mt.c  10240]
    [Thr 75582]
    Please help me to solve permently
    Regards
    Mohsin

    Hi Gaurav,
    I got the issue, problem was that the reginfo and secinfo on my ABAP system which was connected to my JAVA system, it was not allowing the requests to pass through and hence it was not getting registered. I deactivated the parameters of reginfo and secinfo and its now working fine.
    I will look into the issue of where i went wrong with reginfo/secinfo

  • Easy Installation step-by-step for SAP ECC 6.0

    Dear all:
    I am starting to install SAP ECC 6.0 with Oracle 10g
    is there any easy simple step by step guideline .
    which CD is the first one I should used? is it kernel ,master data disk and which exe file to start.
    Thanks in advance.

    Hi,
    Please follow the official installation documentation at http://service.sap.com/instguides -> Business Suite Apps -> SAP ERP.
    The installation is performed by tool called SAPInst. This can be started from the Installation Master DVD. But ofcourse the Installation Master DVD would be specific to you Operating Syste/Database.
    Description of other required installation media (Kernel, Export, RDBMS etc) is mentioned in the installation document.
    Suggest you to go through it completely.
    Regards,
    Srikishan

Maybe you are looking for