File system is getting full Frequently in Federated Portal

Hi
In my production federated portal the file system
File system           /usr/sap/<SID>/JC01 -
is getting full 100% for every 30 minutes ,
what could be the reason for this behavior,  this is happening since from 6 days
can I  be assisted on this
Regards

Hi Michael ,
It does not release the space automatically, what does this command show du -k | sort -n Following are the last lines
I pasted the lines vertically , but in this page all lines  are  mixed and clubbed horizontally the out put of the command start now  ************************************
214260  ./j2ee/cluster/server0/temp/webdynpro
214660  ./SDM/root/origin/sap.com/caf
214704  ./SDM/root/origin/com.adobe/PDFManipulation/Adobe Systems/0/800.20070626144044.156488
217212  ./j2ee/cluster/server0/temp
223168  ./j2ee/cluster/server1/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps
224000  ./j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps
225844  ./j2ee/cluster/server1/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal
226672  ./j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal
227456  ./j2ee/cluster/dispatcher/log
233540  ./SDM/root/origin/com.adobe/FontManagerService
233540  ./SDM/root/origin/com.adobe/FontManagerService/Adobe Systems
233540  ./SDM/root/origin/com.adobe/FontManagerService/Adobe Systems/0
262300  ./j2ee/cluster/dispatcher
283464  ./SDM/root/origin/sap.com/ess
292296  ./j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment
295108  ./j2ee/cluster/server1/apps/sap.com/irj/servlet_jsp/irj/root/portalapps
295324  ./j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/portalapps
300344  ./j2ee/cluster/server1/temp/webdynpro/temp
300344  ./j2ee/cluster/server1/temp/webdynpro/temp/sap.com
350848  ./j2ee/cluster/server1/apps/sap.com/irj/servlet_jsp/irj/root/web-inf
351096  ./exe
366616  ./SDM/root/origin/com.adobe/XMLFormService
366616  ./SDM/root/origin/com.adobe/XMLFormService/Adobe Systems
366616  ./SDM/root/origin/com.adobe/XMLFormService/Adobe Systems/0
383428  ./SDM/program
388232  ./SDM/root/origin/sap.com/tc
487640  ./j2ee/cluster/server1/temp/webdynpro
490564  ./j2ee/cluster/server1/temp
508248  ./j2ee/os_libs/adssap
519288  ./j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf
567240  ./SDM/root/origin/com.adobe/PDFManipulation
567240  ./SDM/root/origin/com.adobe/PDFManipulation/Adobe Systems
567240  ./SDM/root/origin/com.adobe/PDFManipulation/Adobe Systems/0
645996  ./j2ee/cluster/server1/apps/sap.com/irj/servlet_jsp/irj/root
650780  ./j2ee/cluster/server1/apps/sap.com/irj
650780  ./j2ee/cluster/server1/apps/sap.com/irj/servlet_jsp
650780  ./j2ee/cluster/server1/apps/sap.com/irj/servlet_jsp/irj
723796  ./j2ee/os_libs
814652  ./j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root
819436  ./j2ee/cluster/server0/apps/sap.com/irj
819436  ./j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp
819436  ./j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj
1248364 ./SDM/root/origin/com.adobe
1319004 ./j2ee/cluster/server1/apps/sap.com
1336304 ./j2ee/cluster/server1/apps
1470012 ./j2ee/cluster/server0/log/archive
1665496 ./j2ee/cluster/server1/log/archive
1681300 ./SDM/root/origin/sap.com
1730984 ./j2ee/cluster/server0/log
1856844 ./j2ee/cluster/server0/apps/sap.com
1878272 ./j2ee/cluster/server0/apps
1927368 ./j2ee/cluster/server1/log
2929664 ./SDM/root/origin
2931364 ./SDM/root
3314792 ./SDM
3881168 ./j2ee/cluster/server1
3943000 ./j2ee/cluster/server0
8094976 ./j2ee/cluster
9156032 ./j2ee
12878604  .
*****************end of out put 
Regards
Edited by: sidharthmellam on Oct 27, 2009 4:15 AM

Similar Messages

  • Whether will falsh player support  Unrestricted File System Access in Full Trust ?if it will , when?

        I am doing a software based on Flash , to provide my customer to edit pictures online.
        In some scenario, to get Full Acess Local File is necessary. I find SliverLight 5.0 had supported such features:
    Unrestricted File System Access in Full Trust
    Full Trust in-browser for enterprise scenarios
    Default Filename in SaveFileDialog and OpenFileDialog
       I really desire those features , so , I am wondering whether adobe will support it .If will, when?

    Please read the below flash player administrator guide
    http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flas h_player_11_7_admin_guide.pdf
    check the section "The User FlashPlayerTrust directory". It will help.

  • Root file system is 100% full on server with oracle databse

    hi,
    This was very strange to me, i have a solaris 10 Generic_122300-03 sun4u sparc SUNW,Sun-Fire-V440, with one oracle database running on it. The daatabase guys was doing some activity and the CPU utilization was 100%. I got an update from db team that their process was hung for aroung 2 hours and db was not coming up. At this point of time the / file system was piling 100% and suddenly the database came up and / file system came down to normal.
    i am not sure what had happened, i didnt get an oppurtunity to check for any logs files getting generated under / apart from var or swap which can cause this. var is seperate file system.
    any idea on finding this out?

    Only thing I can suggest is to have auditing enabled - then you can possibly see what file or directories are being accessed during this time when it slows down. Also make sure you have enough swap space defined. I had production machines in the past that generated massive swap usage and the system would slow to a crawl during the time the application/machine was initializing for a run. Also check the usual messages in /var/adm.

  • File system logs are Full

    In my Database and Application Server,
    mount point /sapmnt/D01/global
    WF_LOG_000000016002_017-rwxrwxrwx   1 root       sys           2936 Jun 22  2007
    WF_LOG_000000016003_017-rwxrwxrwx   1 root       sys           2936 Jun 22  2007
    WF_LOG_000000016004_017-rwxrwxrwx   1 root       sys           2936 Jun 22  2007
    WF_LOG_000000016005_017-rwxrwxrwx   1 root       sys           2936 Jun 22  2007
    WF_LOG_000000016006_017-rwxrwxrwx   1 root       sys          26225 Jun 22  2007
    WF_LOG_000000066004_017-rwxrwxrwx   1 root       sys           5548 Jun 22  2007
    WF_LOG_000000066005_017-rwxrwxrwx   1 root       sys          29140 Jun 22  2007
    WF_LOG_000000066006_017-rwxrwxrwx   1 root       sys          24134 Jun 22  2007
    So shall I remove this logs frm database and Application Server.
    Regards,
    santosh

    Thanx SAM,  for reply message, I use swu10 remove the log.
    but in my file system  is still showing 93 % full.
    /sampmt/D01/global      following direcory are there .
    total 15730
    drwxrwxrwx   2 root       sys         152576 Apr 16 10:35 000JOBLG
    drwxrwxrwx   2 root       sys         432128 Apr 16 18:56 017BDCLG
    drwxrwxrwx   2 root       sys        4234240 Apr 17 09:50 017JOBLG
    -rwxrwxrwx   1 root       sys              0 Jun 22  2007 ABAPPROT
    -rw-rr   1 d01adm     sapsys      416440 Apr 17 09:48 SLOGJ
    -rwxrwxrwx   1 root       sys         639432 Jun 24  2007 SLOGJ.SAV
    -rw-rr   1 d01adm     sapsys      999920 Apr 14 10:27 SLOGJO
    -rwxrwxrwx   1 d01adm     sapsys      999920 Jun 23  2007 SLOGJO.SAV
    -rw-rw----   1 d01adm     sapsys        2515 Apr 15 12:35 WF_LOG_000000125004_017
    -rwxrwxrwx   1 d01adm     sapsys         160 Jun 25  2007 dev_sapstart
    -rwxrwxrwx   1 d01adm     sapsys         270 Jun 24  2007 ms_acl_info
    drwxrwxrwx   2 d01adm     sapsys        1024 Apr 13 09:26 sapcontrol
    drwxrwxrwx   4 d01adm     sapsys          96 Jun 24  2007 security
    pwd
    /sapmnt/D01/global
    shall I remove this logs directory..
    Regards,
    Santosh

  • Newb needs help opening file browser and getting full file name and path.

    Ok, so I'm a TOTAL newb here, but I have managed to get it to open a file browser but all I can seem to get it to do is give me the NAME of the selected file *eg. selectedFile.name* I also need the path of the file as in C:\example\file.mp3.
    The program I'm making plays an MP3 of your choice at a certain time, like an alarm clock. But I got tired of entering the file path of the MP3 EACH time so I wanted to have a browse feature.
    Ideas... help... thanks...
    Nicholas

    you'll need to use air to get the path.

  • File system getting full and Server node getting down.

    Hi Team,
    Currently we are using IBM Power 6 AIX operating system.
    And in our environment, for development system, file system is getting full and development system is getting slow while accessing.
    Can you please let me know , what exactly the problem & which command is used to see the file system size and how to resolve the issue by deleting the core files or some ting. Please help me .
    Thanks
    Manoj K

    Hi      Orkun Gedik,
    When i executed the command df -lg and find . -name core noting is displayed, but if i execute the command df is showed me the below information. below is an original file which i have modified the sid.
    Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
    /dev/fslv10     52428800  16279744   69%   389631    15% /usr/sap/SID
    Server 0 node is giving the problem. its getting down all the times.
    And if i check it in the /usr/sap/SID/<Instance>/work for the server node "std_server0.out file , the below information is written in the file.
    framework started for 73278 ms.
    SAP J2EE Engine Version 7.00   PatchLevel 81863.450 is running! PatchLevel 81863.450 March 10, 2010 11:48 GMT
    94.539: [GC 94.539: [ParNew: 239760K->74856K(261888K), 0.2705150 secs] 239760K->74856K(2009856K), 0.2708720 secs] [Times: user=0.00 sys=0.36, real=0.27 secs]
    105.163: [GC 105.164: [ParNew: 249448K->80797K(261888K), 0.2317650 secs] 249448K->80797K(2009856K), 0.2320960 secs] [Times: user=0.00 sys=0.44, real=0.23 secs]
    113.248: [GC 113.248: [ParNew: 255389K->87296K(261888K), 0.3284190 secs] 255389K->91531K(2009856K), 0.3287400 secs] [Times: user=0.00 sys=0.58, real=0.33 secs]
    Please advise.
    thanks in advance
    Manoj K

  • Root file system getting full SLES 10 SAP ERP6

    Hi Gurus
    Iam having an unusual  problem.My / file system is getting full and i can`tv pick up what causing it .I have checked the logs in /var/messages.I  dont know whats writing to / .I didnt copy anything directly on /
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/sda5             7.8G  7.5G     0 100% /
    SLES 10 64 bit  ERP6 SR2
    Anyone who had a similar problem.
    Any ideas are welcome

    cd /
    xwbr1:/ # du -hmx --max-depth=1
    1       ./lost+found
    48      ./etc
    1       ./boot
    1       ./sapdb
    1       ./sapmnt
    1430    ./usr
    0       ./proc
    0       ./sys
    0       ./dev
    85      ./var
    8       ./bin
    1       ./home
    83      ./lib
    12      ./lib64
    1       ./media
    1       ./mnt
    488     ./opt
    56      ./root
    14      ./sbin
    2       ./srv
    1       ./tmp
    1       ./sapcd
    1       ./backupdisk
    1       ./dailybackups
    1       ./fulloffline
    cd /root
    xwbr1:~ # du -hmx --max-depth=1
    1       ./.gnupg
    1       ./bin
    1       ./.kbd
    1       ./.fvwm
    2       ./.wapi
    12      ./dsadiag
    1       ./.gconf
    1       ./.gconfd
    1       ./.skel
    1       ./.gnome
    1       ./.gnome2
    1       ./.gnome2_private
    1       ./.metacity
    1       ./.gstreamer-0.10
    1       ./.nautilus
    1       ./.qt
    1       ./Desktop
    1       ./.config
    1       ./Documents
    1       ./.thumbnails
    38      ./.sdtgui
    1       ./sdb
    1       ./.sdb
    4       ./.mozilla
    56      .

  • File system corrupted *after* it was unmounted

    Hi all,
    I'd be interested in any opinions on this problem.
    I recently bought a 1TB Samsung Story Station 3 usb hard drive for use with Time Machine.
    This model of drive has a power switch on the front. Most of the time I don't need hourly backups so my plan is to leave the drive turned off most of the time and only turn it on when I feel the need for automatic hourly backups.
    A beautiful setup... except... The file system keeps getting corrupted and it is not always repairable.
    What is happening?
    My procedure is to eject the disk then switch off the drive.
    About half the time an immediate disk verify will report that the disk requires repair.
    I have tried variations of this with very similar results. Here is a typical failure scenario:-
    1 - Start Time Machine "Back Up Now"
    2 - Let it copy some data then stop the backup (if necessary)
    3 - Eject the disk
    4 - Switch off the drive
    5 - Switch on the drive
    6 - Verify
    Variations on the theme...
    I have tried the drive with and without a bootable image restored to it and therefore with and without journalling on the file system (I believe).
    1, 2 - I have tried copying data using finder instead of using time machine.
    3 - I have tried umount -f and diskutil unmount
    Note that umount without -f reports the drive is busy but other ejection/unmount mechanisms work.
    Is this related?
    The only thing that may have made a difference is that powering down the mac, instead of just the drive, after ejection has not yet resulted in a damaged file system.
    The obvious conclusion to draw is that a buffer somewhere is not being flushed before I turn off the drive, but is this buffer in OS X or in the drive itself?
    In either case I assume other people are having the same problem.
    For now I will just leave the drive turned on all the time. Maybe this is what everyone else does so nobody else has sees the problem.

    I need help with my MP3 Player. This is the second one I have bought and it keeps going to 'File System Corrupted'. Its an RCA MP3 Player. Holds 5GB's. My first one lasted about 6 months and this one only 3 months. I don't drop it. Like maybe once, but on a soft floor and its never been thrown or beaten on. No marks on it from being dropped or hit on anything. Also I can't get it to respond to my computer. I plug it in and says, 'File System Corrupted'. There needs to be like a way to fix it. Other wise the people who built it are getting money easily with a device that works only a short limited amount of time. I've pressed my power button and held it for 0 seconds. Nothing happens. I'm really annoyed with this device. I've waited much money on it. Is there at all a way to fix it. ~Dark Warrior~

  • How to configure a QFS file system on RAID5 disk in Sol 10 sparc

    Hi Forum,
    I am setting up Sun cluster 3.2 for oracle RAC on solaris Sparc system (2 node setup)
    I have a SAN disk of emc clarrion which is a RAID 5 disk.
    For Oracle clusterware to install it needs QFS file system so i also downloaded sun storedge QFS (refering to sun DOC)
    When i try to mount the samfs filesystem
    bash-3.00# samsharefs Data
    samsharefs: Filesystem Data not mounted
    bash-3.00# sammkfs Data
    Building 'Data' will destroy the contents of devices:
    /dev/dsk/c3t60060160F6B02000760677FF21FCDD11d0s4
    /dev/dsk/c3t60060160F6B02000760677FF21FCDD11d0s5
    Do you wish to continue? [y/N]y
    total data kilobytes = 104857600
    total data kilobytes free = 104857536
    total meta kilobytes = 104857600
    total meta kilobytes free = 104856192
    bash-3.00# samfsinfo Data
    name: Data version: 2
    time: Thu Feb 19 20:05:32 IST 2009
    count: 2
    capacity: 0000000006400000 DAU: 64
    space: 00000000063fffc0
    meta capacity: 0000000006400000 meta DAU: 16
    meta space: 00000000063ffa80
    ord eq capacity space device
    0 20 0000000006400000 00000000063ffa80 /dev/dsk/c3t60060160F6B02000760677FF21FCDD11d0s4
    1 21 0000000006400000 00000000063fffc0 /dev/dsk/c3t60060160F6B02000760677FF21FCDD11d0s5
    bash-3.00# mount /db_qfs
    mount_samfs: Non shared fs and shared are mutually exclusive.
    When i try to mount the file system i get the above message.
    Kindly suggest appropriate steps to resolve this issue.
    Regards
    Prakash

    As per the usual setup of a shared SAN disk. The file system used is UFS. when i started installing oracle clusterware i came to a point where i had to run root.sh. the error i got was UFS filesystem not supported.
    So now i get stuck in deciding which filesystem oracle clusterware would support. As i had the sun storedge QFS file system setup in the document i continued to follow it.
    If you have any steps for configuring oracle clusterware to use the UFS file system it would be an additional help. As i have the UFS file system setup ready at my end.
    Regards
    Prakash

  • Increase file system size

    Hello,
    I have solaris9 system where on disk c0t0d0, I have 7 partitions. The first partition shows file system mounted=yes with 10GB space. This file system is near full ( 95% used). I need to increase the size. How can I do that?
    I have another partition that shows 30GB and file system mounted=no. Can I create a file system to use this 30 GB? Does it disturb existing file system?
    Appreciate your help.

    I agree with the guest poster a few posts up. This could be a unique opportunity to think about Bike Trials something that she would really love to do.
    Instead of just looking at what's available, think first about what you really want - what would be Bike Trial Seller fulfilling and enjoyable. Is there anything creative she has always wanted to do?
    If she loves being a nurse, look at other opportunities within this field that would not involve physical work.
    If nursing is just a job, and Bike Store she doesn't enjoy it that much, then look at this as a pointer towards doing something different.
    Start making Bike Shop brainstorming lists about all the jobs she would love to and could do - you will come up with something that she can feel excited about.
    Edited by: cocosan on May 12, 2009 1:39 AM

  • J2EE_ADMIN user getting locked frequently

    Hi SAP Guru's,
    The user J2EE_ADMIN in our nw2004s system is getting locked frequently. We have changed the password of this user in ABAP via SU01 & in JAVA in the secure store via configtool. The server was re-booted after doing these changes. Still the user J2EE_ADMIN is getting locked frequently. Also in SM21, we have a log <b>"J2EE_ADMIN locked due to incorrect logon"</b> for this locking which mentions the user as SAPJSF (Communication user between ABAP & JAVA).
    Is there a possibility that SAPJSF is locking the user J2EE_ADMIN ?? how & why ??
    Any help on this will be highly appreciated.
    Thanks,
    Sanjeev.

    have you solve this issue? we have the same!
    every half hour (xx:51:00 and xx:29:00), the J2EE_ADMIN user is locked by user SAPJSF transaction KRNL from the local host (terminal).
    We have changed the pass in secure store in configtool to the pass we used in abap.
    In "Visual Administrator" "Cluster>Server>Services-->Security Provider" the user have a checked box at "No password change required"
    We searched for other places with a wrong pass (Jco Connections = no J2EE_ADMIN used, SLD = no J2EE_ADMIN used), but found nothing.
    need help pls.
    regards
    chris

  • SYSTEM account gets locked automatically

    Hi,
    Recently I started the oem agent on one of the box. Since then, the system account gets locked frequently.
    Can you please guide how can I investigate on this ?
    Also, I checked the failed accounts in recent times and I can see someone is connecting from terminal "pts/4".
    Please help to resolve this asap.
    Regards,
    Harry

    Please specify your OS and DB versions.
    Can you please guide how can I investigate on this ?
    Also, I checked the failed accounts in recent times
    and I can see someone is connecting from terminal
    "pts/4".It means someone is trying to hack the system account. I assume you have configure audit options so you can log where this attempts come from. Even though you have already realized attacks come from pts/4 it will only have sense if you are able to discover in the few minutes what's the actual terminal attached from pts/4. On the other hand, it sounds to me that someone opened a session in a unix like box, and is able to see the os where the database resides. If this is the case, look for the output from the os command 'last' to find out further information about pts/4. If this hacker has reached the OS, it is a serious matter, it could quite easily get signed to the database if it is OS authenticated.
    ~ Madrid

  • File system /usr/sap/hostctrl/work getting full rapidly

    Dears,
    Recently We have installed PI 7.1 on AIX 6.1 and database is Oracle 10g.
    Everything is working fine but we are facing one strange issue with it.
    Our file system  /usr/sap/hostctrl/work  is getting full again and again,I checked that there is a file dev_saphostexec that is taking maximum space,At present its of 15 GB.
    So please suggest how to solve this problem.
    Shivam

    Dear Mark,
    I have read OSS Note SAP Note 1031096 - Installing Package SAPHOSTAGENT.
    We are starting this week installing "Diagnostics Agent 711" on all SAP Netweaver 7.00 mananged system.
    I have read the "Diagnostics Agent 7.11- Setup Guide".
    In the "Installation Process", there is a step concerning the "Install the SAP Host Agent - Page 9".
    I have read the "Installation_SAPHOSTAGENT.pdf" guide.
    In the first page of this guide, it is written :
    "You only need to download and install the host agent in the following cases :
    - You want to centrally monitor a host that does not have an SAP component"
    - You want to perform an upgrade to the SAP NetWeaver 7.1 for an SAP NetWeaver component".
    In our productive envronment, we do have 2 clusters :
    Cluster 01 is composed of 2 nodes.
    Only "Databases" and "Central Services" of 5 SAP Systems are running.
    There is no CI or SA
    Cluster 02 is composed of 6 nodes.
    Only CI and AS of 5 productive systems are running on theses 6 nodes.
    My question :
    Do we have to install a SAP HOST AGENT in nodes of cluster 01 ?
    As written in "Downloading and Installating Package SAPHOSTAGENT" guide,
    SAP HOST AGENT only need to be install on "host that does not have an SAP component".
    Can we consider that "database" and "Central Service" are SAP Component or not ?
    Thanks in advance for your feedback
    Best regards
    P. Cuennet

  • File system getting full // dev_icmmon rapidly increasing

    Hello All,
    /sapmnt/SID/profile file system getting full
    /in this file system dev_icmmon rapidly increasing
    more dev_icmmon
    [Thr 258] **** SigHandler: signal 1 received
    [Thr 01] *** ERROR => IcmReadAuthFile: could not open authfile: icmauth.txt - errno: 2 [icxxsec_mt.c 728]
    [Thr 258] **** SigHandler: signal 1 received
    [Thr 01] *** ERROR => IcmReadAuthFile: could not open authfile: icmauth.txt - errno: 2 [icxxsec_mt.c 728]
    please help me to resolve the issue
    Regards
    Mohsin M

    I have killed icmon process ..now problem is solved

  • When I run repair permissions I continue to get this message even after a full reformat and re-install of OS.  "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repai

    When I run repair permissions I continue to get this message even after a full reformat and re-install of OS.  "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."

    Doug,
    According to Apple, Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore.

Maybe you are looking for