File system not clean after hibernate or suspend

Hello everyone,
I followed the arch wiki to set-up pm-utils (https://wiki.archlinux.org/index.php/Pm-utils). I included the recover=[swap drive] in my grub configuration. Whenever, I run either pm-hibernate or pm-suspend, however, I am greeted with less than kind messages on reboot.
Checking File Systems
.....(first couple are fine)
Reiserfs
Filesystem is NOT clean
Replaying journal: Trans replayed: mountid 47, transid 2301, desc 4815, len 25, commit 4841, next trans offset 4824
.... (repeat nearly identical messages 17 times)
Replaying journals: Done
Reiserfs journal: '/dev/sda6' in blocks [18..8211]: 18 tranactions replayed
Somethins is going wrong when the disk is suspending and the filesystem is not liking it. Does anyone know what may be causing this and have any suggestions on what to do?
Thank you very much.
Last edited by Tripsun (2011-01-22 06:51:34)

Tripsun wrote:Is it possible that this error is due to the fact that I am using reiserfs for my /var partition? The current setup of my partition is /boot, /, /home, /usr, /tmp all using ext3; /var using reiserfs; and swap. Would the issue maybe be resolved if I switch /var to something like ext4 or JFS?
ReiserFS has nothing to do with your problem (I also have /var/ on reiser and suspend works fine).
Your {pm-suspend,messages,kernel}.log would be helpful here...

Similar Messages

Boot up - Error Message: "File System not clean"

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?locale=en-US&comments_parentId=667528&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
At start up displays error message: File System not Clean"
== start up computer
==
== Troubleshooting information
==
WebOfTrust, AdBlock Plus 1.2, Ubuntu Firefox Modifications 0.7, Firefox Universal Uploader (fireuploader) 0.4.1, Foxytunes 4.0.6
== Firefox version
==
3.0.19
== Operating system
==
Linux
== User Agent
==
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.19) Gecko/2010040116 Ubuntu/9.04 (jaunty) Firefox/3.0.19 GTB7.0
== Plugins installed
==
*-The default plugin handles plugin data for mimetypes and extensions that are not specified and facilitates downloading of new plugins.
*The demo print plugin for unix.
*Shockwave Flash 10.0 r45
*DivX Web Player version 1.4.0.233
*The Totem 2.26.1 plugin handles video and audio streams.

http://ubuntuforums.org/

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Access DB (& .ldb file) does not close after crystal reports

Post Author: mgold
CA Forum: Crystal Reports
Access DB (& .ldb file) does not close after crystal reports
Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
A few key pieces of information:
- The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
- It worked on this client's network until sometime in the last few weeks.
- One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
- It works fine running the application from a Windows Vista PC with a user who is a domain admin.
- The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
- The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
- I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
Thanks!
- Mark

Crystal doesn't support tables in HTML interpretation.
You can probably work your way around this by doing Replace() calls on the relevant tags.
See:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
The supported HTML tags are:
" html
" body
" div (causes a paragraph break)
" tr (causes only a paragraph break; does not
preserve column structure of a table)
" span
" font
" p (causes a paragraph break)
" br (causes a paragraph break)
" h1 (causes a paragraph break, makes the font bold
& twice default size)
" h2 (causes a paragraph break, makes the font bold
& 1.5 times default size)
" h3 (causes a paragraph break, makes the font bold
& 9/8 default size)
" h4 (causes a paragraph break, makes the font bold)
" h5 (causes a paragraph break, makes the font bold
& 5/6 default size)
" h6 (causes a paragraph break, makes the font bold
& 5/8 default size)
" center
" big (increases font size by 2 points)
" small (decreases font size by 2 points if it's 8
points or larger)
" b
" i
" s
" strike
" u
The supported HTML attributes are:
" align
" face
" size
" color
" style
" font-family
" font-size
" font-style
" font-weight

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ? My files are not corrupted after it is done like many other threads i have readed.

Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ? My files are not corrupted after it is done like many other threads i have readed. Sometimes it's changing the title of a movie or editing the season and episode number of a TV show ect.....

Yup same here
I am running the latest iTunes, the latest updates to the OS and on an iMac 3.4GHz Quad core i7 with 8GB of RAM and the music stored on local HDD.
Still locks up iTunes for between 2 minutes up to 20 minutes.
Really annoying.
If you find a fix please, please let me know, I have just been throwing hardware at it with no joy at all

Some mp3 files do not play after upgrading to iTunes 8.0

some mp3 files do not play after upgrading to iTunes 8.0
have upgraded and some songs which used to play on iTunes 7 no longer play. album art is missing. when trying to play on of these songs, nothing appears in the playbar at the top of the window.
it seems the same problem exists in the mac os environment.

The solution I discovered to fix this problem was to create a smart playlist with all song of a kind containing MPEG. Then I went through album by album, and coverted ID3 tags using the value of NONE. This then enabled me to play the songs in iTunes 8.0 and in many cases restored the Album Art.
Thanks!

PSE 6.0 on Mac: File system not supported

Downloaded PSE 6.0 as root on 10.5.6, PPC G5 w/ Mac OS Extended (Case-sensitive Journaled) FS. When I began install, got "file system not supported." Any ideas? Thanks.

Ah, yes, then you're one of the few people who come here who've done that who have a reason. The average person who has trouble resulting from this just randomly chose that option when formatting (lots of people think they won't be able to use capital letters in file names if they don't). Unfortunately, just for future reference, I believe this is a problem with all adobe products. I know it's the same with Photoshop.

File sharing system not accessible after Apple update

*Hi all,*
*i've just made a mac os x server online update (10.6.3) and the file sharing service is not anymore accessible from users accounts (my admin account works). Authentication seems to succeed (/Library/Logs/PasswordService/ApplePasswordServer.Server.log):*
May 19 2010 11:32:13 RSAVALIDATE: success.
May 19 2010 11:32:13 AUTH2: {0x48dcf82a0f1aef720000001300000013, marc} DIGEST-MD5 authentication succeeded.
*i was looking for some helpful log in /var/log, i noticed that system.log is always updated with the following messages:*
May 19 11:36:56 osxserver com.apple.launchd[1] (com.apple.kdcmond[34130]): posix_spawn("/usr/sbin/kdcmond", ...): No such file or directory
May 19 11:36:56 osxserver com.apple.launchd[1] (com.apple.kdcmond[34130]): Exited with exit code: 1
May 19 11:36:56 osxserver com.apple.launchd[1] (com.apple.kdcmond): Throttling respawn: Will start in 10 seconds
May 19 11:36:59 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60868] connect
May 19 11:36:59 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:02 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60871] connect
May 19 11:37:02 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:04 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60872] connect
May 19 11:37:04 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:06 osxserver com.apple.launchd[1] (com.apple.kdcmond[34138]): posix_spawn("/usr/sbin/kdcmond", ...): No such file or directory
May 19 11:37:06 osxserver com.apple.launchd[1] (com.apple.kdcmond[34138]): Exited with exit code: 1
May 19 11:37:06 osxserver com.apple.launchd[1] (com.apple.kdcmond): Throttling respawn: Will start in 10 seconds
May 19 11:37:07 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60875] connect
May 19 11:37:07 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:10 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60876] connect
May 19 11:37:10 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:13 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60879] connect
May 19 11:37:13 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:16 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60882] connect
May 19 11:37:16 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:16 osxserver com.apple.launchd[1] (com.apple.kdcmond[34142]): posix_spawn("/usr/sbin/kdcmond", ...): No such file or directory
May 19 11:37:16 osxserver com.apple.launchd[1] (com.apple.kdcmond[34142]): Exited with exit code: 1
May 19 11:37:16 osxserver com.apple.launchd[1] (com.apple.kdcmond): Throttling respawn: Will start in 10 seconds
May 19 11:37:18 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60883] connect
May 19 11:37:18 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:22 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60886] connect
May 19 11:37:22 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:24 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60887] connect
May 19 11:37:24 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7] is being rate limited
May 19 11:37:26 osxserver com.apple.launchd[1] (com.apple.kdcmond[34146]): posix_spawn("/usr/sbin/kdcmond", ...): No such file or directory
May 19 11:37:26 osxserver com.apple.launchd[1] (com.apple.kdcmond[34146]): Exited with exit code: 1
May 19 11:37:26 osxserver com.apple.launchd[1] (com.apple.kdcmond): Throttling respawn: Will start in 10 seconds
May 19 11:37:27 osxserver jabberd/c2s[350]: [7] [::ffff:10.0.102.7, port=60890] connect
*i dont know if it's related but actually /usr/sbin/kdcmond doesn't exist!*
*in /var/log the file system.log is the only one that changes when i try to login according to "ls -lt", any suggestions? a dns problem? it sounds weird but in the passed i had problems with ldap and dns... thanks in advance!*
K

*in /var/log/krb5kdc/kdc.log*
May 19 11:43:35 osxserverny01x.osxserver.org krb5kdc[96](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.0.102.101: CLIENTNOTFOUND: marc@LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897 for krbtgt/LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897@LKDC:SHA1.E12D05537EF D9FE67BF53BDB2C8D7725916B4897, Client not found in Kerberos database
May 19 11:43:35 osxserverny01x.osxserver.org krb5kdc[96](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.0.102.101: CLIENTNOTFOUND: marc@LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897 for krbtgt/LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897@LKDC:SHA1.E12D05537EF D9FE67BF53BDB2C8D7725916B4897, Client not found in Kerberos database
May 19 11:44:27 osxserverny01x.osxserver.org krb5kdc[96](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.0.102.101: CLIENTNOTFOUND: admin@LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897 for krbtgt/LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897@LKDC:SHA1.E12D05537EF D9FE67BF53BDB2C8D7725916B4897, Client not found in Kerberos database
May 19 11:44:27 osxserverny01x.osxserver.org krb5kdc[96](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.0.102.101: CLIENTNOTFOUND: admin@LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897 for krbtgt/LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897@LKDC:SHA1.E12D05537EF D9FE67BF53BDB2C8D7725916B4897, Client not found in Kerberos database
May 19 11:44:31 osxserverny01x.osxserver.org krb5kdc[96](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.0.102.101: CLIENTNOTFOUND: admin@LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897 for krbtgt/LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897@LKDC:SHA1.E12D05537EF D9FE67BF53BDB2C8D7725916B4897, Client not found in Kerberos database
May 19 11:44:31 osxserverny01x.osxserver.org krb5kdc[96](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.0.102.101: CLIENTNOTFOUND: admin@LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897 for krbtgt/LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897@LKDC:SHA1.E12D05537EF D9FE67BF53BDB2C8D7725916B4897, Client not found in Kerberos database
May 19 11:44:43 osxserverny01x.osxserver.org krb5kdc[96](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.0.102.101: CLIENTNOTFOUND: marc@LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897 for krbtgt/LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897@LKDC:SHA1.E12D05537EF D9FE67BF53BDB2C8D7725916B4897, Client not found in Kerberos database
May 19 11:44:43 osxserverny01x.osxserver.org krb5kdc[96](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.0.102.101: CLIENTNOTFOUND: marc@LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897 for krbtgt/LKDC:SHA1.E12D05537EFD9FE67BF53BDB2C8D7725916B4897@LKDC:SHA1.E12D05537EF D9FE67BF53BDB2C8D7725916B4897, Client not found in Kerberos database
*none of the two accounts are found in Kerberos database but admin can actually login*

[Solved] No boot bc changed file(Old:not booting after battery runout)

x86_64
kernel 3.7.9-1
Cinnamon DE
I was copying files from an external USB HDD and I didn't notice the battery was running out, and so it did run out.
Therefore it shut down, and now I can't access Linux. (Also tried fallback mode)
Also I'm dual-booting arch and w7, and w7 does boot, it's weird that arch just won't.
So Grub menu does load, but after selecting Arch , it just hangs with one text line and prompt, also can't input anything; it shows like this:
/dev/sda4: clean, 250964/1638400 files, 2039871/6553600 blocks
That's shown when I don't have the USB HDD connected (the one I copied files from)
And when I do have it connected, it's the same just some more lines:
/dev/sda4: clean, 250969/1638400 files, 2040885/6553600 blocks
[ 8.08436]sd 4:0:0:0: [sdb] No Caching mode page present
[ 8.084698]sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 8.09866]sd 4:0:0:0: [sdb] No Caching mode page present
[ 8.108374]sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 8.109660]sd 4:0:0:0: [sdb] No Caching mode page present
Journalctl
--Reboot--
Feb 21 11:43:19 arclin pulseaudio[469][pulseaudio]bluetooth-util.c:'org.bluez.Manager.Get.Properties()failed:org:freedesktop.systemd1.LoadFailed:Unitdbus-org.bluez.service failed to load
Feb 21 11:43:22 arclin pulseaudio[446][pulseaudio]pid.c:Daemon already running
Feb 21 13:18:01 arclin gnome-session[440]WARNING:Failed to start app: Unable to start application:Failed to execute child proccess "gnome-screensaver"(No such file or directory)
Feb 21 13:18:45 arclin gnome-session[440]WARNING:Application 'cinnamon.desktop' killed by signal 15
Feb 21 14:58:57 arclin gnome-session[440]Gdk-WARNING:gnome-session:Fatal IO error 11 (Resource temporarily unavailable on X server :0
END
/var/log/Xorg.0.log
[ 11.138]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 11.138] X Protocol Version 11, Revision 0
[ 11.138] Build Operating System: Linux 3.7.4-1-ARCH x86_64
[ 11.138] Current Operating System: Linux arclin 3.7.9-1-ARCH #SMP PREEMPT Mon Feb 18 02:13:30 EET 2013 x86_64
[ 11.138] Kernel command line:BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxx ro quiet
[ 11.138] Build Date: 25 January 2013 09:33:50 AM
[ 11.138] Current Version of pixman 0.28.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.138] Markers: (--)probed, (**) from config file, (==) default setting, (++) from command line, (!!)notice, (II) informational,(WW) warning, (EE) error, (NI) not implemented, (??)unknown.
[ 11.138](==)Log file: "/var/log/Xorg.0.log", Time: Thu Feb 21 16:43:09 2013
[ 11.174](==)Using config directory: "/etc/X11/xorg.conf.d"
[ 11.208]Parse error on line 6 of section InputClass in file /etc/X11/xorg.conf.d/10-keyboard.conf
"Section" is not a valid keyword in this section.
[ 11.208](EE)Problem parsing the config file
[ 11.208](EE)Error parsing the config file
[ 11.208]
Fatal Server Error:
[ 11.208]no screens found
[ 11.208](EE)
Please consult the The X.Org Foundation support at http://wiki.x.org for help.
[ 11.208](EE)Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 11.208](EE)
[ 11.209]Server terminated with error (1). Closing log file.
(Copied by hand BTW)
Any suggestion/help is appreciated
Thanks in advance
Last edited by arcaid (2013-02-23 01:47:19)

Without the 'quiet' kernel parameter, it says that dhcpcd service failed and it stucks at [OK] Graphical User Interface.
Also managed to get the logs (dmesg,journalctl,xorg.0.log). And with all of your input I realized that I recently modified several files to have another keyboard layouts, which I still haven't managed to achieve. I remember I did reboot after the changes to those files, but other layouts never showed up, so I left those files modified (mistake)
Now the thing is that I thought that I had fixed one of them '10-keyboard.conf' in the above posts, as frank604 suggested commenting out the whole section inputclass. For some reason I Interpreted that as 'coment out only ''inputclass' line'' and never checked the log (xorg.0.log) after the change...
Well now after checking the new log, it says 'error on line 7' so after commenting out the whole section, like this:
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "ye"
Option "XbkLayout" "us"
#Section "InputClass"
# Identifier "Keyboard-layout"
# MatchIsKeyboard "on"
# Option "XkbLayout" "us,es"
# Option "XkbOption" "grp:caps_toggle"
EndSection
I typed startx ,it didn't mark another error but it still wouldn't start,so I decided to reboot.
After that... arch does enter now !
All of this just because I wanted to change the keyboard layouts.
Having said that.. the problem was that file I modified and after removing my changes and rebooting, now it boots!. Seems like the 'battery run out while copying files' was not related to arch not booting, or so I think.
Thanks for all your attention

System not started after installing grid control

HI,
I have installed grid control 10.2.0.1 on 11g r2 on rhel5.After installing grid control, whenever system get booted, it got hanged and saying
after starting up the listener
sql>ora-01078: failure in processing system parameters
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>

Hi,
Thanks for the reply!!!
I have installed 11g grid infra on 2 nodes and then try to install 10g grid control on node 1 but when i am booting my system it got hanged and throw an error:
sql>ora-01078: failure in processing system parameter
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>
then i have to forcefully bring down the system and started the linux in a single user mode and thereover i have to move or rename the dir to some other location,then only system get started.after starting up the system i have to again move or rename the grid control dir to org location.
So my question is which file or dir is forcing system to startup the grid control on boot?

Firefox 8 upgrade file does not start after downloading it.

I am using Firefox 3.0.19. I tried to download the .exe for firefox 8 in order to upgrade, but when I start the exe, the only window that pops up is asking if I want to run the upgrade under this user or another. When selecting my user (I have admin rights), the window closes and nothing happens.
Do I first need to uninstall Firefox 3 ?
And also, will my bookmarks be kept when upgrading (of course without first uninstalling ff 3). Or which file should I backup and where should I place it back?

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You may have to start the installer as administrator via the right-click context menu: Run as Administrator
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Hyperlinks from converted excel file are not working after pdf file is moved

I have created a pdf file from an excel file that has hyperlinks in it. The hyperlinks work fine if the files are all kept in the same exact location as the time they were created. Once the files are moved (i.e. emailed to another user) the hyperlinks no longer work. An error message pops up that the file can not be found. Is there a setting or something that I'm missing in acrobat that allows for the files to be moved, so that the hyperlinks still function properly, after creation

No settings adjustments.
The issue is that links, once made, have a specific path (as shown when you view the link's text string).
When you email the files the person who recieves the email and downloads the attachments would have to have the same layout of files/folders you have.
Without that links are "broken"
You email a zip file that, when extracted, would create the folders/files in the required layout to reflect what you have.
Be well...

Touchpad permanently not working after resuming from suspend

I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO).
Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detected.
In Windows, in the UltraNav control panel, the touchpad is marked as enabled and cannot be disabled, the trackpoint is grayed.
In Linux, I can see the difference is kernel traces when the driver is loaded.
Before : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
Now : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x0/0x0
After looking at https://gerrit.chromium.org/gerrit/#/c/31105/ and Synaptics public documentation, I was able to get more information : the device status register (F01_RMI_Data0) is 0x45, which means the touchpad is in flash programming mode since there is a firmware CRC failure.
It looks like http://code.google.com/p/chromium-os/issues/detail?id=24298, so it's probably not a Lenovo specific problem, but a bug in Synaptics firmware.
Can Lenovo provide the firmware to flash like http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-Touchpad-jumpy-response-when-used-with-90... which would hopefully make my touchpad working again ?
The original firmware should work, but an updated one would be better, if it avoids losing the touchpad again later.

I don't know why, but this made me think of the episode of the simpsons when home tries to get over 300 pounds so he can work from home. When he tries to dial the phone he hist all the buttons and gets a recording that says "We're sorry, you're fingers are too fat. To obtain a special dialing wand, please mash the keypad now."
BTW, sorry I can't help... but at least I am entertained easily.

M4b files will not sync after recent update

I recently updated the software on my ipod touch 4th gen. After updating, I tried to sync my playlists, but not all of the files would sync. After some investigation, I figured out that the files that wouldn't sync were audio books in m4b format. They synced just fine before the update. What is the problem here?

Thank you for the response, I have not tried a restore, won't that wipe out everything on the phone? Leaving on vacation and don't have time to start over, I'll have to try this after I get back if the next response does not solve the problem.

File system not clean after hibernate or suspend

Similar Messages

Maybe you are looking for