File system problems

Hallo everybody
My device works already with KitKat.
Now I have problems with the file system.
If I add a folder with the File Commander in e.g. Internal storage/Music, I can’t see the folder on the PC connected with USB. Neither “refreshing” nor disconnecting/connecting helps.
A folder created with the PC can be seen with the File Commander.
Can anybody help?

Hi,
Try to copy content to the folder you have created in the file manager and see if it appears when you connect the phone to the PC.
Which operating system do you have on your PC?
What are your thoughts about this forum? Let us know by doing this short survey.

Similar Messages

Yosemite will not install and won't let me change startup disk, it's saying there is a file system problem but disk utilities can't fix it.

I Downloaded the Yosemite upgrade and went to install it on my iMac. The install failed saying file System needed repair. Ran disk utility could do the verify but the repair button was grayed out. When I tried to change startup disk back it wouldn't let me , saying it couldn't gather enough file info. So I'm stuck and can't boot my Mac. How do I get out of this?

Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Try to reboot normally.
OS X Recovery
OS X Recovery (2)

File Systems Problem!

Hi everyone!
I've got a nice USB external hard-drive which I'd like to use to back up both my Windows PC and my Macbook. My Windows PC will back up fine with some free software I found on the web, but I would like to use Time Machine to back up my Mac.
I have thought of partitioning my external hard-drive: one partition in NTFS for Windows and one partition in a file-system readable by my Mac.
Therefore, I have a question: are there any file systems that both OS X and Windows can read to, that support hard drives of 160gb+?
Many thanks for your help in advance
A

For Time Machine to work properly (or at all, really), you need to use the HFS+ (Apple) filesystem. HFS+ is the only filesystem which will support the Apple metadata and other special "junk" that required to properly preserve your files. Time Machine relies heavily on this.
Windows can't normally read or write HFS+ filesystems. However, there is a commercial program that is reportedly able to do this:
http://www.mediafour.com/products/macdrive/
(I am not affiliated with them in any way.) Depending on what you use for backup in Windows, this may just do the trick.
Personally, I have an external HFS+ USB drive dedicated to Apple backups (we have a few in the house), and another FAT32 one dedicated to Windows/Linux backups.

IPhoto file system problems (unique)

A while ago I moved all my pictures from a 2007 MacBook to a 2006 iMac. I bought the iMac from the school I attended and it was running an older version of iPhoto. Instead of "Events" they were "Rolls." Anyway, I've since updated to iPhoto '11 9.2.1. On my MacBook I frequently opened the iPhoto library to access photos for emailing or uploading rather than going through iPhoto. I've never modified any folders or photos or anything else within the file system, only in iPhoto. Ever since I updated iPhoto, however, something strange has occurred. The file tree used to mimic the events in iPhoto so it was easy to locate the pictures I wanted. Now, it is very confusing. All previous events from my MacBook are the same, but new photos aren't. After importing photos and organizing them into events, the file system doesn't reflect it. Instead, my photos within the file system are all over the place. The organization is based on the date of importing and not the events in iPhoto which frustrates me to no end since I am a bit OCD with file organization. Anyway, does anyone know what I can do? It drives me crazy. In iPhoto itself, the photos are organized by event exactly like I want. In the file system in Finder, however, it is not. You might ask why I care.... I just do. Obviously something is wrong and/or different than before.
If this has been answered before, I apologize. I've tried to do some research so if you know where, just point me in the right direction. Thank you SO much for any help!

Answered here: https://discussions.apple.com/message/8925249#8925249
Unfortunately I couldn't find it until I asked it and it was suggested on the sidebar. Sorry everyone!

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with the EFI system partition's file system.

I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
Problems were found with the partition map which might prevent booting
Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
However a verify disk on the volume partition gets a clean bill of health!
I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
Cheers

I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
Cheers.
Bud

MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.

MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!

Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.

Problem in Reducing the root file system space

Hi All ,
The root file system is reached 86%. We have cleared 1 GB data in /var file system. But the root file system still showing 86%. Please note that the /var file is not seprate file system.
I have furnished the df -h output for your reference. Please provide solution as soon as possible.
/dev/dsk/c1t0d0s0 2.9G 2.4G 404M 86% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 30G 1.0M 30G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/dev/dsk/c1t0d0s3 6.7G 3.7G 3.0G 56% /usr
/platform/SUNW,Sun-Fire-T200/lib/libc_psr/libc_psr_hwcap1.so.1
2.9G 2.4G 404M 86% /platform/sun4v/lib/libc_psr.so.1
/platform/SUNW,Sun-Fire-T200/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
2.9G 2.4G 404M 86% /platform/sun4v/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
swap 33G 3.5G 30G 11% /tmp
swap 30G 48K 30G 1% /var/run
/dev/dsk/c1t0d0s4 45G 30G 15G 67% /www
/dev/dsk/c1t0d0s5 2.9G 1.1G 1.7G 39% /export/home
Regards,
R. Rajesh Kannan.

I don't know if the root partition filling up was sudden, and thus due to the killing of an in-use file, or some other problem. However, I have noticed that VAST amounts of space is used up just through the normal patching process.
After I installed Sol 10 11/06, my 12GB root partition was 48% full. Now, about 2 months later, after applying available patches, it is 53% full. That is about 600 MB being taken up by the superseded versions of the installed patches. This is ridiculous. I have patched using Sun Update Manager, which by default does not use the patchadd -d option that would not back up old patch versions, so the superseded patches are building up in /var, wasting massive amounts of space.
Are Solaris users just supposed to put up with this, or is there some other way we should manage patches? It is time consuming and dangerous to manually clean up the old patch versions by using patchrm to delete all versions of a patch and then using patchadd to re-install only the latest revision.
Thank you.

Problem in create index on file system repository

I want to create an index on file system repository,but have some problem.
1) create a windows filesystem repository
2) I can found the repository entry in KM content
3) go into "index administration" and create index,but I can not found the entry when I pressed "add" button on datasources page

hello Karsten
thanks for your consideration.
After create a Windows file system Repository,I create the index as the fowllowing step.
1) go to the page System Administration=>Knowledge Managment=>Index Administration and click Create button for creating index, then a form appeared.
2) fill in the for specified value, then press Create Index button to create index
3) click on DataSource link, in the Datasource Tab, click the Add button, then I could see all of folders on the screen( such as documents,calendar,etc), but I can not found the Windows File system Entry that just I created.
I can not create a index for the Windows File System
what is the wrong with it?
thanks

Problems with the File System Repository & User Mapping!

Hi All
I am having a problem with a file system repository, and setting up user mapping for that repository.
I have done the following:
Created a File System Repository
Created a Network Path
Created a System (Including the alias)
Now when I go into User Administration and select my user the is no user mapped systems to select.
All this system is doing is connecering to a folder on our File System.
Any help would be great as this is really frustrating!
Thanks
Phil

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

Windows 7 problem with EFS (Encrypting file system)

Hello colleagues!
I think this topic is related more to the security.
The problem is a bit unusual and google doesn't give me a clear answers, but maybe anyone came across
with similar problem...
In general, I suspect that my problem is EFS (Encrypting file system), ie
service that automatically encrypts files using a digital signature (certificate).
A little background:
- On the work PC it was necessary to reinstall
the system, according to corporate rules all the content we have is encrypted using EFS (Encrypted files are highlighted with green color as you know).
I have copied all the data on a portable drive and also copied the certificates (certmgr.msc).
The system was reinstalled. The only change - it was x32 and became x64.
- It was necessary to free up some space on the hard drive (the file
system on it is NTFS), so, I temporary copied all the files on my home PC. My work certificate was installed on it too, because
I work from home
sometimes.
When the work PC was repaired, I've moved all the files back in
the same way (ie on the portable HDD, then to the work PC).
All files were working, but when I needed MS Word documents, it became clear that something was wrong.
When I've opened the document, it gaveme a window with weird symbols and prompts me to select the encoding ... of course -
no encoding was fit.
Started to explore all the documents, it appears that some part of them were working,
someof them not - all the old documents were working, ie the ones, which
were created before deploying EFS (newly created or copied files immediately encrypted).
So, now I am sure that the
documents were somehow re-encrypted, at least on a portable hard drive, they do not look as encrypted (not highlighted in green), but it's still not open.
Completely stopped opening all the documents that have
been encrypted (for all types of files, ie it is not just an MS Word, but also pdf, presentations, charts, and even the pictures).
Tell me, who faced similar?
How can it all back? I have no possibility to restore those documents from another sources.

Try copy those corrupted files and make sure you are using the same certificate and then re-encrypt the copied files and try decrypt them.
If possible, use the same account as you used for encryption.

What's with the new edition of Pages using Maverick? Google rejects the files with the following message attached "The reason for the problem: 5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked as its content security threat?

I recently upgraded both Pages 09 (I believe) and went to OSX 10.9 Maverick .... now I am unable to send a pages document to a friend on gmail. Google rejects the message and attachment with the following explanation -
The reason for the problem:
5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked because its content presents a potential\n5.7.0 security issue.

Same Problem here
IWORKS 09 pages, keynote, numbers does not send in MAIL (mac) because of "This message was blocked because its content presents a potentialsecurity issue"
its a problem not only on GMAIL but also Live, Hotmail, Yahoo, and other services...
The problem is that gmail and others haved yet accepted the latest iworks 09 files. its a problem that apple can ask then to fix but its up to the gmail and others to fix it.
Solution!!!:
1 - Send it by exporting to office files
2 - Saving the files as old iwork documents
3 - Command P and save as PDF
4 - Save in icloud and send the URL
So you can still send them but have to take a bit more of your time
i hope you understand my english is not optimal
And if you have any questions feel free to ask me

-- A file association problem exists, which prevents the file you're trying to download from being associated with the correct application by the operating system using window 7 IE 11

A file association problem exists, which prevents the file you're trying to download from being associated with the correct application by the operating system
USING WINDOW 7 IE 11 HOW CAN I FIX???

Try downloading the offline installers:
Adobe Reader
Flash Player for Internet Exporer - ActiveX
Flash Player for Firefox - NPAPI

When trying to install Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

When trying to install Pro Tools 10.3.3 Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

Thanks Linc for responding to my post. I searched a little further and found I was missing a file. Once I downloaded the fix, I was able to install the software from the original download.

Read only file system and Problems witth pacman -S

Hi im a newbie at Arch, and i have 2 problems...
1) When I log in as a root user i can't modify any of the configuration files cause i only have a " Read only file System" does anyone know how I can change this cause im sick of using my live cd to modify the files i need to change..
2) I have problems with pacman -S it says " Unable to lock database if you're sure pacman is not already running you can remove /tmp/pacman.lck"
when i do rm /tmp/pacman.lck it says that it can't be done cause the file doesn't exist.. and Im sure that my dhcp and dns is working fine... (just in case of any wonder)
Well if someone could help me i really would appreciate it
thanks

# <file> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults    0 0
/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/fd0    /mnt/fl vflat user,noauto 0 0
/dev/hda6    swap swap default 0 0
/dev/hda5/ ext3 defaults 0 0
/dev/hda7/mnt/windows vfat rw,usev,auto,umask = 000 0 0
fsck -fC /dev/hda5 didnt work it said... "Error while executing fsck.ext3 for /dev/hda5

File system problems

Similar Messages

Maybe you are looking for