File Systems are not shown in CCMS Monitoring

Hi Gurus,
We have installed all SAP components in Solaris 10 zones including Solution Manager.
Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
Thanks,
Pj

Hi,
You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
Note 870652 - Installation of SAP in a Solaris 10 zone
Note 724713 - parameter settings for Solaris 10
Hope this will solve your problem.
--Ragu

Similar Messages

In rz20 all file systems are not coming.

Hi all.
I have ccms configuration in local system not in central system menas every system there are own ccms configuration.
File system In rz20 that all file systems are not coming.
in os level there are like sapdata1,sapdata2.... & sapreorg but these file system are not coming in rz20.so we are not getting any alert regarding this file systems.
Kindly suggest how can i fetch all the file system which are available in os level.
thanks in advance.
Thanks & regards,
Laxmid

Hi Kumar,
Os -HP Unix
In *RZ0> SAP CCMS Monitor Templates>Filesystems--->* these below file systems are not coming.Otheres are coming.
/oracle/RXN/sapdata1
/oracle/RXN/sapdata2
/oracle/RXN/sapdata3
/oracle/RXN/sapdata4
/oracle/RXN/oraarch
/oracle/RXN/sapreorg
& please tell me there is one Lock & unlock is there in front of every node.what is this.
Thanks & Regards
Laxmi
Edited by: laxmid on Feb 7, 2010 9:04 PM

HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

Since my last update to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

update 10.8.5 solved this problem. Thankyou anyway.

Files, tools, help categories above firefox start page are not shown. How to restore pls?

File, Edit, view, history, bookmarks, tools etc are not shown at the top
of my mozilla start page. Maybe I have deleted it when I deleted cookies and history. How can I restore them. Pls help.

Thanks a lot. Problem solved. No doubt about it MFF is really the BEST!!

Sometimes, some images are not shown...

Hi!
Out applet shows (or loads?) all images correctly, but sometimes, one or more images are not shown (or loaded?). What can it be?

I am having a similar problem so maybe someone can help me too.
I find that my images load correctly most of the time, but once in a while (say 1 in 4 attempts), some of them dont load. The reliability of this is much better now that I have moved the images out of the jar, but its still not right
I also find that sometimes the classes do not load. I get classdef.not.found for a file that really should be there. I can see that the jar containing it has been downloaded to the temp dir. I have been clearing my cache out manually for now between every attempt.
I am not sure what code to show. I dont think its necessarily a problem with images since classes dont always load either, but here is the code for loading images anyway.
        MediaTracker tracker = new MediaTracker(applet);
        for (int i = 0; i < img.length; i++) {
          img[i] = applet.getImage(urlCodeBase, imagePath + images);
tracker.addImage(img[i], i);
tracker.waitForID(i);
if (tracker.isErrorAny()) {
System.err.println("Error loading image " + images[i]);
My web content is being delivered by 3rd party hardware which might be rather slow - its hard to tell. My entire web content is approx 200KB. Results are the same using IE or Mozilla.
Any ideas would be a great help!

Permissions are not shown correctly in Get Info on Snow Leopard client, using Tiger server w/ ACL's

Invoking "Get Info" on a file or folder which is on a shared volume hosted by a G5 running Server 10.4 fails to show meaningful permissions when done from a 10.6 iMac. It says only that the user has "custom permissions", which is true since there are ACL's in operation. However, the Owner and Group POSIX settings are not shown, only the Everyone setting shows, making it impossible to determine which user created the file (in order to resolve issues when permissions prevent intended action). The same file or folder will show Owner and Group on 10.5 systems, as well as at the 10.4 Server itself, so we do have a workaround. I have noticed, though, that I have run into permissions restrictions where I should not, such as creating a folder on a shared volume using a 10.6 system, and then not being able to save into that folder from the same system/user.
Is there something about the implementation of ACL's in Tiger that confounds Snow Leopard's Finder?

Hi,
I did two things to get it working, and haven't taken the time to sort out which did it. But it is working so it's good enough for me.
First I followed TeenTitan's suggestion, and also checked "Allow printing from the internet". I'm behind a firewall so not too concerned I'll get someone's odd photo on the printer.
Second I went back to server admin, selected the queue under queues in the Print service, then selected IPP and deselected LPR. Bonjour went grey but stayed checked.
After this I see the printer with "@ server name" appended, and it added the printer drivers like it should.
So all working well.

Artworks are not shown in my iTunes

To save disck space on my MacBook I have all my music files on a external hard drive (and the iTunes files in the MacBook disk). However, very often, a lot of artworks that I put in my albuns are not shown when I open the Itunes. To refresh the album artwork I have to go inside each album and see the information of the albun's first music. Do you know any way to force Itunes to refresh the view of the artworks?

There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

Communication channels not shown in adapter monitoring

Hello everybody,
we got several communication channels running on the same file-adapter.
But in adapter monitoring only ONE communication channels is shown.
The other communication channels are not shown although we expected them at least with an error.
Any ideas?
Thanks a lot
Regards Mario

Hi,
I think, you have chosen the selection criteria only for the Correct one in the Page.. Check with All information in adapter monitoring screen.
Following will be looked once you don't have any adapters are visible..
Check SAP BASIS Content is imported in the IR or not.
Check this thread also-
Problems in adapter monitoring
Regards,
Moorthy
Message was edited by: Krishna Moorthy P
Message was edited by: Krishna Moorthy P

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

The maximize/minimize and close and buttons are not shown correctly when FF windows is maximized.

I have the same problem on all my computers, one running Windows 7 and two with Vista.
The three buttons in the upper right corner of the FF windows are not shown correctly. They are soft of cut off in the middle when the FF window is maximized.

It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.<br />
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf

Embedded Fonts are not shown anymore

When I create a PDF from a Word Doc, the embedded Fonts are not shown anymore. In the previous Version it was working perfectly. My version is currently 11.0.10.

Thank you for your feedback. The Job im using is simple take a word document converting it into a pdf format. If this is done I will see it in my Acrobat view. There is no fonts at all. The System is notifying me that the font "ETBFGYI+DIN-Regular" are not embedded. And there will be some character not shown or printed correctly. I didn't change anything on the setting of Acrobat. I'm using this Acrobat almost for 2 years and I never had any problem. The Problem came up after the last update of the software to version 11.01.10.

Hide a type of file System wide not just the extension*

Is it Possible & if So Howto hide a type of file System wide not just the extension*
Am trying to HIDE the Associated file for Photo Processing software in Finder, its a Specific file to the Program & holds the Raw data text Processed Info
. Would mean I would need to change each File individually
Is there a way/apple script?
Knowledge or experience would be Appreciated
Thanks

I followed these instructions and they work, but I also get errors. Here are two files in the directire, and the contents of ~/.profile, I called the function killextension:
I run the command to hide the PDF:
Note the two errors. Thank you very much, BTW. No more Dropbox attributes files!

Input and output varaiables are not shown

Hi,
I am using BICS connectivity to connect to a BeX query from Xcelsius. I am able to logon to SAP use datamanager conn and also able to select a query. But after that the query input and output variables are not shown. Instead all those fields are greyed out. I am not sure whether am missing any configuration. Please let me know if anyone have workaround for this issue.
Thanks,
Sivakami - SEMC SAP team

That is interesting. The first (AES) is producing a 128-bit key, the second (aes) is producing a 256-bit key.
Producing a 256-bit key should not be possibe without the JCE/JCA Unlimted strength policy files installed, I have those files, installed, do you?
If someone who doesn;t have ththe policy files installed tried it, what do they get?
I would suspect that the case-sensitive nature of the underlying JVM is causing it to choose a different Crypto Provider when you use aes than when you use AES. The JVM that ColdFusion ships with (and the standard JVM) have severa crypto providers to choose from, plus ColdFusion Enterprise and Developer addition also include the BSafe Crypto-J provider), I think there are 10-11 total.
I would log a bug for this.
FYI, you can control this by using the optional keylength argument in generateSecretKey()
These two statements will produde keys with the same length.
#arrayLen(binarydecode(generateSecretKey("AES", 128),"base64") )#
#arrayLen(binarydecode(generateSecretKey("aes", 128),"base64") )#

Special characters are not shown in compare document report in Acrobat X

Hi All,
I have a pdf document which is having some special characters like üὄ. Now I have updated the document with few corrections and while compare document in Acrobat X special characters are not shown in the report.
Can any one please look into this and give suggestion.

Hi Steve,
Thanks for your reply.
Platform - PC
Application - 3B2 and Acrobat 9
So far we have seen this kind of issue in only one document. In the below screenshot you can see 2 pdf files, the right side one is my MS pdf and the left side one is the exported pdf from 3B2 application both the files having the special characters such as . I just did the text comparison however both and is missing in the exported pdf but the reports shown the changes for characters only wherever the charactes is missing the report not shown the changes properly(See highlighted in yellow).
Please let me know if you need more deatails.

File Systems are not shown in CCMS Monitoring

Similar Messages

Maybe you are looking for