File that controls transparency flattener (advanced tab or print)

When I print I have four options "low resolution" "medium resolution" "high resolution" and "fuji" (for our proofer).
I want to edit or at least look at the files that effect those options. Does anyone know where they reside?
alan

Edit > Transparency Flattner Presets

Similar Messages

  • I have picture files that I do not know how to print them out ?

    The printer is the HP Photo Smart 7510 and the email with photo's attached was sent to the printer email address. The printout say view photos  Download all. the question is how do you do that?
    This question was solved.
    View Solution.

    I will need some more info in order to help out. Are you sending these photos from a smart phone or a computer? If this is a smart phone is it an  Android or an iPhone? 
    Some general guidelines for sending photos successfully via ePrint are:
    Make sure that the photo is at least 100 DPI (Dots per inch) anything less will be discarded.
    Make sure that the photos/files are not over 5MB
     If sending multiple attachments that the number of attachments do not exceed 10. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?

    I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided.  I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Simplex and was greyed out.
    Is it possible to change the settings in that tab with Adobe Acrobat XI?
    Regards
    Sharon

    Dear Sara
    Thank you for your reply.
    I have two printers, both support automatic duplexing.  Any PDF we receive
    or create we are unable to print double sided on our mac mini¹s.  I didn¹t
    make it clear in my question that we were fine on Windows XP, but, having
    recently changed to Mac have encountered this frustrating problem.
    I did a lot of research prior to recording the question and it appears I am
    not the only one who has come across this problem, and I have followed the
    guidelines that Adobe promote on their website to be able to print double
    sided, which doesn¹t work on the mac mini Osx Mavericks.
    Because the Properties, Advanced tab has ³Print Dialog Presets² that are set
    to simplex  and greyed out I took that to mean that no matter what printer
    settings I make, and I think I¹ve gone through all that I can, the pdf will
    not print double sided on Mac but will on XP.
    Sorry this isn¹t the reply you must have been hoping for and look forward to
    receiving further advice in regard to this matter.
    Regards
    Sharon

  • I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in li

    I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in light room to print, even though I have the chosen file up in the developing mode, it will instead print the most recent file that I added to lightroom. If found a way to work around these problems, (check make this the copy in the soft proofing, and copy my settings and delete and reload the old files) but it's a slight hassle and it didn't use to do this. Not sure why it changed. Could I have accidentally changed a setting?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • A big thank you to the person who said to go to edit/preferences/advance tab.  I did that but I could not find my external hard drive which is a passport.  I could not find it on my pc or control panel.  I know it it there.  Help!!!

    A big thank you to the person who said to go to edit/preferences/advanced tab.  That helped.  My external hard drive is a passport.  I know I have it ,  I just can't findit.  Not in control panel or desk top.  I don't know how they named it.  Please help!!!

    What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

  • Transparency flattening - unwanted color added to transparent PSD files (IDCS3)

    Recently (after switching to CS3) I began experiencing frustrating problems in relation to (what I think is the problem) transparency flattening.
    The problem seems to evolve in the printing process where "something" messes up the transparency by adding a 1% (typically) magenta color to the transparent flattened image. (I´m using transparent PSD-files)
    This means that the bounding box-area of the image is actually visible in print! I can see this on my own prints (tested on several in-house printers), but worse is that I´m having the same problem with the material I receive from the printing house.
    - When I check my PSD files in Photoshop there is no color but a transparent background.
    - In Indesign I´ve tried a lot of different output settings and job option files but with the same result.
    - In Acrobat my "output preview" measures no deviations, but when I (touch up tool > right click) edit image from inside Acrobat and the image file opens up in Photoshop the 1% is added.
    For now I´m dealing with the problem by adding clipping paths to my PSD files which is a pretty untenable situation!
    Apparently the problems seems to occur also on transparent .tiff filer etc.
    I´m working in CS3 on OSX and I haven´t changed my workflow whatsoever since CS2.
    The printing house is aware of the problem but haven´t experienced the problem before.

    Sounds to me like an RGB/CMYK colour space issue.
    If your image is in RGB but your InDesign document export settings are for CMYK (or vice versa) then you have Adobe converting the colours for you. Since there is a colour shift between the two colour spaces, you have no control over how the conversion happens.
    In photoshop, "white" is not the same between RGB and CMYK and I often find there is 1 or 2% magenta in the mix (just as you're finding) when going from RGB to CMYK.
    The transparency flattener function is pretty much the same as flattening the layers in photoshop - when it gets to the bottom layer you get one image with a box around it. the same in InDesign - everything that has a transparency (including images with no background) is flattened down on all the objects underneath to create a single image. If the transparent object is just on the paper then it gets a white box around it.
    I suggest you check that your images are converted to CMYK in photoshop, and that your PDF export settings in InDesign convert all colours to CMYK. then ensure you use the High Quality in the transparency flattener settings.
    Good luck!

  • The Advanced tab is not showing up when I click the file menu

    I use this version of PowerPivot 10.50.4000.0 and the advanced tab is not available in the file
    menu. Why?

    Hi Todor, have you already tried enabling it from within the Power Pivot Windows by clicking
    File > Switch to Advanced Mode?
    http://msdn.microsoft.com/en-us/library/hh272055(v=sql.110).aspx
    Regards,
    Michael Amadi
    Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
    Website: http://www.nimblelearn.com
    Blog: http://www.nimblelearn.com/blog
    Twitter: @nimblelearn

  • I have AVI files that I need to be MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

    I have AVI files that I need to convert to MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....When I have the files open in QT Pro do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

    I strongly recommend you use compressor to do the conversion (if it will open the files - since quicktime will open them, it will more than likely do it.
    Compressor allows you to customize presets and save them and apply them to multiple files.  Although the interface may seem daunting, it's actually pretty simple.
    Even if you can edit the avi in fcp, it's not a good idea.  Liable to cause problems down the road. 

  • When i exit, mozilla will prompt me a message asked if i would like to save my tabs(i have 13 tabs opened). may i ask, where does all those 13 tabs (web addresses/links) stored in mozilla, or in which file that i can locate in mozilla's folder? I need a s

    I have a problem with my bookmarks, cookies, history or settings
    Description
    When i exit, mozilla will prompt me a message asked if i would like to save my tabs(i have 13 tabs opened).
    may i ask, where does all those 13 tabs (web addresses/links) stored in mozilla, or in which file that i can locate in mozilla's folder? I need a solution that i can find/copy down that 13 web addresses without needed to open mozilla browser.
    YOUR ATTENTION TO ABOVE MATTER IS VERY MUCH APPRECIATED!
    PLEASE HELP!
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

    Please see '''sessionstore.js''' in your Firefox profile directory, the location of which is described in the [[Profiles]] knowledge base article. This file can be viewed in a readable format using the [https://addons.mozilla.org/en-US/firefox/addon/10869/ JSONView] add-on.

  • Photoshop CC 2014: lost advance tab in menu Archive file info

    Hi to all.
    Recently I install Photoshop CC 2014, and I can't find the advance tab in the window "File Info" inside the Archive Menu, when I choose it.
    did we lost this tab in CC2014?
    Can I find this "advance" tab in other menu into Photoshop CC 2014?
    I appreciate any help, because there are a valid info for me inside this tab for my work.
    Thanks in advance and best wishes
    Pablo
    (sorry for my bad english  :S

    Hi JJMack, thanks for your answer 
    This missing info file tab in Photoshop CC 2014, advanced, it's very important to me because I must see a lot of images info all the day, and this tab makes my work a few easy and fast.
    All the exif data are still in the tab "raw data" but in xml format, too hard to my aged eyes   and the thousand pictures I must see in a day...
    Would be nice to include it again in the corresponding tab. Please Adobe!!!
    Thanks for your answer and for your comparative upload image between CC and CC 2014

  • Websites that use java are not working. In the Java control panel, under advanced, default java for browsers "mozilla family" won't stay clicked

    I've recently gotten a new Windows 8 computer. Ever since, I've tried accessing certain websites (like www.cnet.com) and can't get the java scripts to load like for the drop down menus. When I hover over them they don't do anything. Other computers I have that run Windows 7 are working just fine.
    I've upgraded Firefox and Java to all of the newest versions but it's still not working. When I go to the Java control panel, under "Advanced" and under "Default Java for browsers", the check box next to "Mozilla family" won't stay checked. I'll check it, click "Apply" and "Ok" and then when I open it back up it's unchecked again.
    Help.

    cor-el -
    The dom.w3c_touch_events.enabled was already set to 0.
    I don't have a "dom.w3c_touch_events.expose" line. Is that something I should?

  • I cannot save PDF files that has a lock on the right hand side of the tab in safari iOS 5 from my iPad. Please help to find a solution.

    Can someone help find a fix of how to save PDF files from safari in iOS 5.0.1? The PDF files show a lock on the right hand side of tab. Only these lock PDF cannot be save. Any help will be highly appreciated.

    I assume that you have iBooks or GoodReader or Adobe Reader - some app that will open PDF files so my suggestion would be to start with the basic things, restart your iPad, reset it or quit Safari and restart.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    In order to close/quit apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off.
    To power up hold the sleep button until the Apple logo appears and let go of the button.
    The lock to the right side of the tab indicates that the website is secure - or at least that is what it looks like in Safai on my iPad. Sites with the https in the address have the lock icon in the tab, non secure sites - web pages without the https - do not have the lock icon. I'm not sure if that has any bearing on it - none of the PDF files that I have opened in Safari have the lock icon.
    But if you can open the file - it doesn't make sense that it would be locked??? Try the basic suff and see if any of that helps.
    Message was edited by: Demo

  • HT1386 How do I copy music from an old iPod?  Why do you have to make things so difficult?  These are my files that I paid for but once I put them on your devices, I no longer have control over them.  I've wasted so much time on these stupid problems.

    How do I copy music from an old iPod?  Why do you have to make things so difficult?  These are my files that I paid for but once I put them on your devices, I no longer have control over them.  I've wasted so much time on these stupid problems.  I used to be able to do this until you "improved" things.

    Thanks, Deggie. I thought Apple would see my feedback.  I would just like to know if there is a simple way to copy just a few music files from an old iPod.  I saw instructions on how to copy all of them from the iPod but it was complicated and I really didn't want to copy all the songs.  I guess I could delete all the songs but the ones I want to copy then go through that process again.  Do you know how to back up music to my computer?  I don't want to have to go through this again and possibly lose music.

  • Is there a way for Labview to take control of a file that is already in use

    Is there a way in LabView to programatically take control of a file in use by another process?  I wish to write data to files that may be opened by another process, this data is time sensitive and acquired continuously so having my process wait until the file is available is not feasible.
    There should not be any other software accessing these files but sometimes windows is looking at them for some reason and I'm not sure how to make windows let go of them.  This does not accur often but it is annoying.

    Axehandler wrote:
    Is there a way to find out which program/service might be opening these files?
    Yes, use handle or process explorer from sysinternals. (see also).
    How is your labVIEW program structured? Could it be that your LabVIEW program itself holds on to the file from e.g. a previous file IO operation? Make sure references don't become invalid (e.g. via a "use default if unwired output tunnel) which would prevent the file from getting closed properly for example. Your program should open the file once at the start of the program and keep it open for the duration of the run. This way you should not have any intermittent problems accessing it.
    LabVIEW Champion . Do more with less code and in less time .

  • I have an audio file that plays automatically and I can't control it other than reduce the volume.  How do I turn it off?

    I have picked up an audio file that I can't control other than reduce the volume.  I don't know how to turn it off and it plays over any other audio.

    Is this an Apple installed audio clip?
    Have you checked to see if all of your browsers doesn't have a web page that is opened that has the audio? (Best thing is to quit all of your browsers to get that out of the way.) If it goes away, then find out which browser (if multiple), and then figure out what page or just close it if you wish.
    Once you get the browsers out of the way and the audio is still playing. Then quit other programs.
    KOT

Maybe you are looking for