File to BAPI with out BPM

can we do File---> BAPI with out BPM

Which version of XI you are using??
XI 3.0 or PI 7.0?? and SP for it?
Reffer this File to RFC Scenario without BPM
FOr solution reffer this : File - RFC - File without a BPM - Possible from SP 19.
Thanks
Farooq.

Similar Messages

  • File to Web service (SOAP) to File scenario with out BPM in PI 7.1

    Hi All,
    I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
    1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
    2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
    PI server is 7.1 with SP:8
    I have configured the scenario like this
    1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
    2) Created Sender Agreement
    3)Created Receiver Determination
    4)Created Interface Determination
    5)Created Receiver Agreement
    Regards,
    Ramesh

    Hi,
    Thanks for your reply!!
    My Scenario is File to SOAP to File.
    Configred modules  in Sender channal below:
    Prcessing sequence:
    Number       Module Name                                        Module Key
    1..........       AF_Modules/RequestResponseBean.......1
    2..........       CallSapAdapter..........................................2
    3..........       AF_Modules/ResponseOnewayBean.......3
    Module Configuration:
    Module Key                                       Parameter Name                                       ParameterValue
    1                                                        passThrough                                            true
    3                                                        receiverChannel                                       receiverChannel name
    3                                                        receiverService                                        receiverService name
    please tell any more confiration requered.
    Regards,
    Ramesh

  • Jdbc to file synchronous with out bpm

    hi masters,
    can u explain me the step by step of jdbc to file scenireo...... with out bpm ... but it is synchronous...
    thanks in advance,
    jp.

    Hi,
    very useful one's
    try them
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
    /people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
    Regards,
    Vishal
    Message was edited by:
            vishal kharat

  • Error in Sysn-Async with out bpm

    Hi folks,
    I have a scnario  JDBC-PROXY-file..with out BPM.
    File - RFC - File without a BPM - Possible from SP 19.
    by using this blog
    Now for this i used sync JDBC sender here it is repetely taking data from jdbc and it is not updating in the tables
    when i see in the CC monitoring error is
    Error occurred while sending message (GUID 2cc288ac-a012-44f8-018a-d5c3d7983e4e): com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId.
    Now For this scnario i need to add any more modules in the Adapter configuration..
    As i am not receiving any responce...in a file...
    Thanks and Regards
    Vijay

    Hello everyone!
    I do not know if you already solved this issue.
    I was facing the same problem and I've figured out that my CC (in Module screen) was set up with the wrong Parameter Value for the Parameter Name "receiverService".
    That occured because I had changed my Service name when I moved my scenario to production.
    Hope I could help!
    Regards!!

  • XI ALERTS with out BPM Are not working.

    Hi All,
      We are on XI 3.0 sp14. Alerts with out BPM are not working. I want to apply notes 906044, 876546. It says i need to make some changes to the following functions. I could not able to find these Function modules in the first place. Can some one help me out?
    <b>Note -
    Object -
         Name</b>
    906044  -
    function---- SXMS_ALERT_ERROR_RECEIVE
    906044  -
    function --- SXMS_ALERT_ERROR_SEND
    906044&876546--method ---CL_XI_ALERT HAS_ACTIVE_RULE
    906044  -
    method -
      CL_XI_ALERT_UTIL GET_MDT_URL
    905896   -
    method  -
    CL_XI_ALERT CREATE_ALERT
    Thank you
    Ganges Leaves.

    Ganges
    Login into XI Developement and give SE37 Transaction. Then you give SXMS_ALERT_ERROR_RECEIVE and click 'display'.
    Then you check for the methods CL_XI_ALERT HAS_ACTIVE_RULE, CL_XI_ALERT_UTIL GET_MDT_URL, CL_XI_ALERT CREATE_ALERT and make the changes according to service notes. If you dont find this methods in this function then you can try in SXMS_ALERT_ERROR_SEND.
    Regards,
    ---Mohan

  • IDOC Number from payload in Alerts with out BPM

    Hi Everybody,
    I need to send the IDOC Number as Alert for the user.
    Is it possible to do with out BPM either by Alert Frame Work or CCMS?
    Is there any alternative way to capture the Idoc number and display for the erroneous messages?
    Helpful Answers will be rewarded points.
    Thanks,
    Zabi

    Yes,
    You can also do it via alerts.
    Alert can be triggered in different ways.
    1) Triggering by Calling a Function Module Directly. or from UDF
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    2) Triggering by Calling a Function Module in the Workplace Plug-In.
    3) Triggering with an Event Linkage.
    4) Triggering with the Post Processing Framework (PPF) or Message Control (MC)
    5) Triggering from a Workflow.
    6) Triggering from CCMS with autoreaction.
    7) Triggering from BPM.
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    /people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
    8) Triggering alert by configuring a rule from RWB.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
    Br,
    Madan Agrawal

  • BAPI with out Commit

    Hi All
    after bapi calling we need to call commit
    my question is there any bapis with out transaction commit
    Regards
    Surendra

    Hi
    We have the sales order or purchase order with the older version so we need to commit use the bapi_transaction_commit.
    u can chk out in bapi transaction.
    Inside of the code there is commit work is not been used.
    All the LUW's will be commited in the database.

  • Acknowledgement from receiver file Adapter with out BPM

    Hi Gurus,
    I am trying to get Acknowledgement from Receiver file Adapter with out Using BPM.
    Here is the scenario. I am sending files from different Sender Adapters. There is only one target that is File Adapter. After each successfull and failure transaction I need an Acknowledgement that needs to trigger another receiver adapter and send the the file name and timestamp to that file.
    Hope this is a complicated scenario. Please help me.
    Thanks,
    Kevin

    from sap note 821267
    6. Acknowledgements
        * Q: Does the File Adapter support acknowledgements?
        * A: You need to distinguish system acknowledgements (indicating that a message has been received by the target system) and application acknowledgements (indicating that the message has been successfully processed by the application on the receiver side).
               The receiver of an XI message will only send an acknowledgement back to the sender if the sender has requested one. However, the File Adapter has no functionality that relies on the receipt of an acknowledgement, so it never requests one.
               On the other hand, if a File Adapter Receiver receives a request to send an acknowledgement, it will do so for a system acknowledgement request. Application acknowledgements are not supported at all as the File Receiver has no way to determine if the written file has been correctly processed by the back-end application, which is what a positive application acknowledgement would imply.
    this means that your requirement is ideally not possible without a BPM

  • Mapping with out bpm

    hi...guys
    how we will do 1:n multi mapping with out using bpm , pls explain..
    with regards,
    Prasad.

    Hi Prasad
    Go thru the forums given below.. which will discuss the same...
    1:N mapping without using BPM
    Re: 1:N mapping without using BPM --> IDOC to multiple files
    Cheers..
    Vasu
    <i>** Reward Points if found useful **</i>

  • Synch/Asynch with out BPM

    Hi All,
    I have a HTTP to webservice scenario currently running in production , i.e .,
    From the HTTP Application user sends a request to XI . XI makes a SOAP call and sends the request back to HTTP Application .
                 now I have a new requirement to write the SOAP request message to a JMS channel also.
    Let me know how is it achievable with out using BPM .
    Thanks and Regards,
    KLK

    Thanks for the replies , I have to clarify my question
    Yes my requirement is to send the soap - response to JMS .
    The above blog is File - RFC - File ( Asyn/sync) but my requirement is
    HTTP - SOAP -- JMS (Syn/Asynch) .
    The current scenario in production my o/b and i/b message interface are synchronus .
      I need a i/b asynch interface reciepent for the SOAP response .
    Let me know your thoughts
    Thanks
    KLK

  • Multi mapping with out BPM

    HI ALL ,
           I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i  have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
    Regards,
    Tarun.

    Bhavesh,
    I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
    sapuser,
    if you scenario is asynchronous, then it's easily implemented.
    But it won't be achieved with multimapping.
    You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
    For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
    Regards,
    Henrique.

  • Using Planned order Change BAPI with out changing date

    Hi
    I have a planned order with start date in future.
    With in a program, I want to call the planned order using the FM BAPI_PLANNEDORDER_CHANGE to re-explode the order BOM.
    I find that only if I change the order start date to system/current date, the planned order BOM gets updated/re-exploded. Else there is no change in the order BOM.
    My requirement is to re-explode the BOM with out changing the order dates. In the function module I am maintaining "X' against BOM_EXP_FIX_IND.
    But when I do it manually using MD12 and explode BOM with out changing the future start date, the order BOM gets updated.
    Please help on this. Or is there any other FM/BAPI for this purpose.

    Dear Pradeep,
    you could try to set DET_SCHEDULE = X with out
    FIRMING_IND  --> No
    BOM_EXP_FIX_IND   --> No
    Let me Know if it modification setting have solved your problem and i have useful for you,
    Daniele

  • Sender file adapter Adapter with out Key field

    Hi All
                 i do have have a requirment ,Sender file adapter , for FCC but file is  with out Key field
    HEADER>
    <DATA1>
    <DATA2>
    <DATA3>
    <HEADER>              file structure
    <ITEM>
    <ITEM1>
    <ITEM2>
    <ITEM3>
    <ITEM
    and the file si
    '10001,20081902,US
    10,soda,1
    30,soda,4
    40,soda,5
    10002,20081902,US
    10,steel,1
    30,steel,4
    40,steel,5
    , and i need to identify the Header and Item using there lenght only , please anyone as idea abt this help me

    Why to post the same question TWICE... in 30 min ? you don't like the answers ?
    File content Conversion Issuse for a Sender File Adapter

  • To create a Material using BAPI with out passing the material number

    Hello Experts,
    I am using BAPI_MATERIAL_SAVEDATA to create a material of some Ztype. I am successfully creating a material if I am passing Material Number as input. I want the material number to generated internally.
    When I am doing material creation with same input data with out material number using BDC, it is working fine. It is generating the material number.
    But, not with the BAPI.
    Do, I need to specify this some where in the BAPI to generate the Material number internally? Please let me know.
    Please help me in this regard.
    Thanks & Regards,
    Naresh.

    Hi,
    Read the BAPI documentation regarding Internal Number range for materials.
    When you create material master data, the following fields must always
    contain a value in the structure:
    o   MATERIAL
        Only external number assignment is supported for the material number
        (MATERIAL). If you want the material number to be assigned
        internally, the method BAPI_MATERIAL_GETINTNUMBER must first be
        called. This method determines an internal number for the material
        to be created. You must enter this internal number in field
        HEADDATA-MATERIAL.
    Regards
    Vinod

  • Return delivery BAPI with out ref

    looking for  bapi or fm to create a return delivery with out reference.

    Hi Priya,
    Try below BAPI  programs
    BAPI_OUTB_DELIVERY_CREATENOREF
    SHIP_DELIVERY_CREATE_NOREF
    Regards
    Ram

Maybe you are looking for