File to BPM Scenario?

Hi Friends,
Can anybody send me File to BPM Scenario with screen shots.
Regards,
Naidu.

Hi,
Please check the following links regarding file toBPM.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
For all the pattern u mentioned, u can get the same from SAP BASIS component.
regards
mahesh.

Similar Messages

File to RFC to File with BPM Scenario

Hi all,
 I am trying to implement a Sender File ( async ) to RFC (sync ) to Receiver File with a BPM. I using the blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1926. [original link is broken] But it doesnt work. First message FileRequestOut is correct in SXMB-MONI, but the second is showing a error. I checked in SXMB-MONI-BPE and I say in workitem is follow message:
Message Error Workflow
Error handling for work item 000000001714
Work item 000000001714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
No reference message specified when sending a response
No reference message specified when sending a response
I configured my BPM scenario in this way:
( Sender File Adapter )
First Step
Receiver Step ( Asynchronous )
Mode: Asynchronous
Receive Message: File Request
( Receiver RFC Adapter )
Second Step
Send Step ( Synchronous )
Mode: Synchronous
Request Message: File Request
Response Message: File Response
Receiver From: Send Context
( Receiver File Adapter )
Third Step
Send Step (Asynchronous )
Mode: Asynchronous
Receive Message: File Response
Receiver From: Send Context
 I have changed it, many times and I can get solve it. About my configuration objects, I think it is ok, because a tested my Interfaces in Configuration Test Tools it was ok. ( Receiver Det. Interface Mapping, etc)
 I have seen in SDN, this error maybe Sencond Step must be Synchronous e Third Step must be Synchronous too. Is it true? In other hand, I have seen, it is possible to use a Async / Sync Brigde.
 Could you help me about this problem?
 Thanks for help
 Best regards
 Fábio Ferri
 Consultant XI/ABAP/Netweaver

Hi ,
 I have seen in SDN, this error maybe Sencond Step must be Synchronous e Third Step must be Synchronous too. Is it true? In other hand, I have seen, it is possible to use a Async / Sync Brigde.
 In BPM did u used as
 Recive Step Async
 Synchronous Send Step
 Send Step is Async
 it is possible to use a Async / Sync Brigde.
 No need to use Asyn Sync Step for this
Assign poins if u found hepful
Best Regards.,
V.Rangarajan

Java.lang.NullPointer Exception in File-RFC-File wtihout BPM scenario

Hi All,
I have implemented scenario File - RFC - File without BPM in PI7.1 according to below link by bhavesh
[File - RFC - File without a BPM - Possible from SP 19.;
but I am getting error java.lang.NullPointer Exception in Audit log of sender communication channel when it enters in ResponseOnewayBean.
I had implemented the same in PI 7.0 but there it was working fine.
Is there any limitations on the use of the above beans in PI7.1 as I could see two more threads on the same unanswered yet.
Please help me in resolving as it is priority task for me
Thanks,
Amit

Sometime back I saved this SAP Note 1261159 for this error. Not sure if it is still valid. Try to get it implemented.
Regards,
Prateek

Need inputs for FILE-Webservice-File using BPM scenario

Hello All,
can any one tell me how to do the file-webservice(soap adapter)-file with out BPM.
If we cant do with out BPM then, please let me know after importing the WSDL file, how many Message interfaces i need to create what are they.
Thanks and Regards,
chinna

Hi Chinna,
Check this links for the receiver side SOAP configuration
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Sender side File adapter configuration is as usual
> please let me know after importing the WSDL file, how many Message interfaces i need to create what are they.
It is a synchronous scenario so you need to create the two message interfacess for the sender (one is for request message and another is for response message). For receiver you don't need to create any message interfaces, because the WSDL internally having the two messages (request and response).
Regards
Ramesh

Error in file to BPM Scenario.

hi experts,
iam doing the scenario file-bpm-file scenario.
here i have three message types where one for sender .
2 for receiver( sender message split by using cust id).
start->receive->transformation->fork->two RD's for two branches> and two send steps for two branches after RD's>end of fork automatic-->stop.
here in sxi_cache the return code is 0.
in sxmb_moni the flag is black and white.
but i didn't get both the messages at output directory.
only first i got.
split.xml------->split1.xml &split2.xml
i got only split1.xml
could u plz tell me where to modify to get the two messages at output side.

i followed IP design just like this .
but iam using send context in "receivers from" property of send step.
is it necessary to use the receivers list in that field of send step(both)
if so how can i modify it in the integration diectory.
will i need to reload the IP service in to it.
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
help me regarding this.

Integration process in File to BPM Scenario

hi,
gud morning. i got a problem while designing a BPM. in designing the integration process in IR, i am not able to get both the abstract interfaces to select from, while defining the container. plz post a solution for this. thank u.

Hi,
In this blog, I have used Business Service created in the integration directory.. This is an abstract . So I need to specify , the Sender and Receiver Interfaces explicitly in the business service. and it doesnot have any entry in the SLD.
But if you create the Business System in the SLD and if you import that into the Integration Directory-->Assign this into your configurations scenario, then this step is not required.
Regd. Importing Integration Process- BPM is kind of Abstract Service.. i.e BPM is acting as a Receiver Service and Sender service both..
i,e Source to BPM ( here BPM is a Receiver)
BPM to Target( here BPM is a Sender Service)
Hope this clarifies..
Regards,
Moorthy

File-RFC-File (without BPM)- Issue

Hi All,
I am working on a File-RFC-File (without BPM) scenario in PI 7.1.
My scenario is having few problems like, its not able to delete the file from the source directory path (for which we have delete permissions) and it is an NFS system and it shows an error in the Sender file CC.
"Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId"
But it gets processed successfully and provides a written paramter which I could see in MONI, but again doesn't write the file in the target directory. Could you please provide your inputs and let me know if I need to do any additional settings w.r.to PI7.1.
These are the parameters which I have specified in the Sender File adapter
Processing sequence
AF_Modules/RequestResponseBean Local Enterprise Bean 1
CallSapAdapter Local Enterprise Bean 2
AF_Modules/ResponseOnewayBean Local Enterprise Bean 3
Module configuration:
1 PassThrough true
3 receiverChannel <FilereceiverCCname>
3 receiverService <Receiver Bus System>
Regards,
Nithiyanandam

Hello,
Check out in module configuration tab for any "type error" or spell mistakes.
Check out this thread which might be useful for you :[ File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.]
regards
Ramesh

Regarding file 2 file using BPM

Hi Experts,
In file to file using BPM scenario my file is being picked in the server but it is not displaying again after polling interval. please help me one this issue as early as possible.

Hi,
File is picked up from the server is ok, but it does not mean that it reached to IE.
Just go to RWB-Component MonitoringAdapter EngineCommunication Channel MOnitoring. and check the Sender File adapter from there and let us know the status??
If it is in Error it cannot be delievered to IS and BPE, so first check it
Thanks
Farooq.

File to RFC scenario with no BPM

I want to create File to RFC scenario with no BPM. I want to invoke RFC synchronously to verify that I'm getting correct response back, but i dont wanna process the response. So, In SXMB_MONI i can check the response back from RFC right? Or do I need to have BPM if want to see the response back from RFC?
What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK?
Thanks,
Deepesh

Hi,
I need to have BPM if want to see the response back from RFC? ... yes
The BPM will help you find the response very comfortable.
What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK? ..Yes you can .
Regards
Agasthuri Doss

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

File to SOAP Scenario Using BPM

Hi,
I am doing File to SOAP scenario using BPM.
while doing Integration Process in IR, i got the following error message
"Expression of simple type xsd:string expected"
But i have given xsd:string in the correlation element as well as in Data types.
I dont know why it is getting the error.
could you anyone please help me to sort out?
Regards,
Sai Ch.

Hey,
Check in the correlation editor, where you define the condition.
Whether the data type of the XPath is string and whether it matches with the data type of the messages that you have selected.also make sure the type of the correlation variable is string.
regards,
Milan

Process sequence in File - XI/BPM - File scenario

how does QOS works within BPM, Since some processes may take time to process for whatever reasons ( due to some delays ).
I'm planning to develop a scenario like this.
I have 7 files which have same Batch number as part of File name which Iam planning to use as Correlation in BPM.
File 1 starts BPM.
Within BPM, all other 6 files will be received and sent out.
Then File 1 should be sent
Then I need to make SOAP call to trigger event on the 3rd party application.
My question is
If I use EOIO as QOS on the Sender file adapters, how does the process works in the following situations.
File 1 - Batch 1 arrives - BPM process 1 starts
File2 - batch 1 arrives - BPM process receivs and sends message
BPM here still waiting to receive files
File 1 - batch 2 arrives - BPM Process 2 starts
All other files . Since all files arrived, all files will be be received and sent out in BPM.
Now question is
BPM Process 1 is still waiting for other files to arrive and BPM process 2 is completed ( Are files will be waiting in Queue here ???)
Does writing of the files on the receiver side will be postponed until queue receives the files from BPM process 1 since I sued QOS as EOIO for all files ?
Would someone please clarify this please.

Hi,
In this blog, I have used Business Service created in the integration directory.. This is an abstract . So I need to specify , the Sender and Receiver Interfaces explicitly in the business service. and it doesnot have any entry in the SLD.
But if you create the Business System in the SLD and if you import that into the Integration Directory-->Assign this into your configurations scenario, then this step is not required.
Regd. Importing Integration Process- BPM is kind of Abstract Service.. i.e BPM is acting as a Receiver Service and Sender service both..
i,e Source to BPM ( here BPM is a Receiver)
BPM to Target( here BPM is a Sender Service)
Hope this clarifies..
Regards,
Moorthy

File to RFC with multiple records using BPM Scenario Error...!!!

Hello Guru's,
I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
Can any one tell me what mistake would i have done.
Thanks in advance.

Hi,
There is one similar discussion I found,
FTP TO RFC using BPM
Thanks
Swarup

XML file to Proxy Scenario with BPM - ID Steps

Hi Guys,
Any one can help me to find about the scenario XML file to ABAP Proxy with BPM, ID steps please. Any link or logical routing, receiver determination and interface determination idea. Please correct me,
I have created Business Service as sender to send one xml file to BPM, BPM is sending a message to SNC system. I have created 2 receiver determinations, but I am confusing in interface determination, where to declare OM?
Please can any one respond bit quicker.
Thanks in advance
Regards
San

ES Repository
                     *Service Interfaces*
Create one outbound service interface for XML file.
Create one Inbound synchronous Interface for SNC system.
Create one Abstract Asynchronous interface ,same message type as you used for outbound service interface .This is for Integration process receive step.
Create one Abstract async interface for receiving the response from SNC system in Integration process.
Create one Abstract synchronous interface to be used in the Integration process for Send sync step.
Create on inbound asyn service interface for sending the response from integration process (received from SNC system) to the Receiver System.
              Operation Mapping.
Create an Operation Mapping using Abstract sync interface and inbound syn interfaces.
              Integration Process
start--->receive Step---->send Synchronous step----->send step.
Create two container elements
first with abstrat async interface for the XML request.
second for abstract asyn interface with the XML response structure (asyn receiver system structure)
In the send sync step select your abstract syn interface from the F4 help.and select the corresponding request and response message from the container element you defined earlier.
Integration Directory.
Create one sender File adapter Communication channel for XML file reading.
Create two receiver communication channel for sync system(receiver XI adapte for ABAP PROXY) and other for asyn receiver system .
Create 3 receiver determination
1.from sender to Integration process.
2.from Integration process to SNC system.
3. from Integration process to Asyn Receiver System.
Create 3 Interface determination.
Specify Operation mapping while you are creating interface determination from Integration Process to Syn BS.
Create one sender agreement
Create two Receiver agreement.
Regards
Kubra Fatima.

File to IDOC Scenario using BPM

Hi Experts,
    I am working on file-Bapi-Idoc scenario using BPM.
    I have two conditions
1. If the Sonumber is populated then need trigger an Bapi_change
2.If the Sonumber is not populated from the file then need to trigger a Bapi_Createfromdat to create the sales order and receive the salesorder number as response from Bapi
and the response of these BAPIs should be validated whether the Bapi is successful or not.
If it is successful message then need to trigger IDOC or else should throw an alert message.
let me know the steps involved in this scenario.
can i send alert message to other email IDs or can i send it to only XI admin?
Please let me know u r inputs.
Thanks in advance
Praveen

Hey,
You need to have a BPM for this.
BPM design.
Recieve step(abstract asynchronous) for file structure
Switch Case(condition whether sonumber is populated or not)
if populated
Branch 1(of switch)
    transforamtion step:- mapping between File and Bapi_Change(Request structure)
Send step(abstract syncronous) To send the BAPI_change
Branch 2(of switch)
transformation step:-mapping between file and BApi_Create
Send step(abstract synchronous) To send the BAPI_Create
Block step(which will include the Switch step)
    trigger an Execption in case of an error(in any of the two branches) through the block
    The Exception will trigger an alert.
Now after the Block step there will be a transformation step(which will have the mapping between RFC response and Idoc)
Next is the send step(abstract asynchronous) for the idoc
In case if there is no exception the Idoc will be triggered or the exception branch will trigger the alert
rewards points if useful
regards,
      Milan

File to BPM Scenario?

Similar Messages

Maybe you are looking for