File to file BPM

hello experts
I try to make a simple file to file scenario, using BPM. in the BPM I have a reciever and sender (with out transformation or anything else). I see it in the SXMB enter to the BPM, but no file is coming out.
is it possible to make a simple file to file scenario?
any suggestions?
(I can make the scenario with out BPM/ the reason I am doing it with BPM is to check something).
help is required
Kfir

hi,
>>>is it possible to make a simple file to file scenario?
yes
>>>I see it in the SXMB enter to the BPM, but no file is coming out.
did you make the config in ID using the wizard twice?
one from file to BPM
and one BPM to file ?
if not do it
you can also click on PE and see on which step did the BPM stop
Regards,
Michal Krawczyk

Similar Messages

File-RFC-File (without BPM)- Issue

Hi All,
I am working on a File-RFC-File (without BPM) scenario in PI 7.1.
My scenario is having few problems like, its not able to delete the file from the source directory path (for which we have delete permissions) and it is an NFS system and it shows an error in the Sender file CC.
"Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId"
But it gets processed successfully and provides a written paramter which I could see in MONI, but again doesn't write the file in the target directory. Could you please provide your inputs and let me know if I need to do any additional settings w.r.to PI7.1.
These are the parameters which I have specified in the Sender File adapter
Processing sequence
AF_Modules/RequestResponseBean     Local Enterprise Bean     1
CallSapAdapter     Local Enterprise Bean     2
AF_Modules/ResponseOnewayBean Local Enterprise Bean     3
Module configuration:
1     PassThrough     true
3     receiverChannel     <FilereceiverCCname>
3     receiverService     <Receiver Bus System>
Regards,
Nithiyanandam

Hello,
Check out in module configuration tab for any "type error" or spell mistakes.
Check out this thread which might be useful for you :[ File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.]
regards
Ramesh

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022     Source = SI_file_split_out
u2022     Target = SI_file_split_in
u2022     Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022     Source system to BPM using interface SI_File_Abs_source
u2022     BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022     from source system to BPM
u2022     Sender interface: SI_File_Split_Out
u2022     Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022     Commu. Component: Source System
u2022     Using interface: SI_File_Abs_source
u2022     Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022     Sender Communication Component: BPM
u2022     Receiver Communication Component: Target System
u2022     Receiver Interface: SI_File_Split_In
u2022     Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
      Message1
           MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

File - RFC - File without BPM --- Object not found in ResponseOneWayBean

I am using PI 7.1, and facing the following error in File - RFC - File without BPM
"Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ResponseOneWayBean."
I am using 1 sender CC for File ( CC_LOTUSNOTES_CHALET_SND)
                  1 receiver CC for File( CC_LOTUSNOTES_CHALET_RCV_FILE)
                 1 receiver CC for RFC (CC_LOTUSNOTES_CHALET_RCV_RFC)
in the sender CC I have given Module parameter as:
Processing sequene
CallSapAdapter    Local Enterprise Bean 2
AF_Modules/ResponseOneWayBean Local Enterprise Bean 3
AF_Modules/RequestResponseBean Local Enterprise Bean 1
Module configuration:
1     passThrough          true
3    receiverChannel      CC_LOTUSNOTES_CHALET_RCV_FILE
3    receiverService       Bus_File
pls let me know where i am wrong

Hi
i am facing following error:
2009-12-03 09:08:17       Information        The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2009-12-03 09:08:17       Information       MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2009-12-03 09:08:17      Error                 MP: exception caught with cause java.lang.NullPointerException
2009-12-03 09:08:17      Error                 File processing failed with java.lang.NullPointerException

File is not getting deleted in File-RFC-File without BPM

Hi,
I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
For the sender CC, I'm passing the following parameters,
Transsport protocol: File system
Message protocol: File
QoS: BE
Poll Interval: 30 sec
Mode: Delete
File type: Binay
Please let me know if I missed anything while passing the values.
Thanks,
Swamy
Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

Hi
Then , is Sender and receiver File Adapter is using same folder )
Just a question.
But having all permisions and above config would delete the file
can u see the status of u r File Adapter in RWB.? Is it in green?
rgds
srini

Setting directory dynamically in File adapter in BPM 11g

Hi,
I am using file adapter in BPM 11g for writing perpose. While configuring, it is required to provide the directory location, which can be either physical path or logical. The location where the new file will be stored/saved is written in a text file. I want to fetch the location from that text file and want to store the new file in that particular location at run time. Please help !!!!

Hi,
You can dynamically set -among others- the outbound directory and outbound file name for a File Adapter. See: http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#CIACICFD. If you need to retrieve the information beforehand from another file, you could use a synchronous read. See: http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#BABDCEBE.
Ronald

Problem in FILE to FILE scanariao with BPM

Hi all,
Please give me the advise regarding scanario File to File with BPM. When i was sending the message from source to target its not getting. The message can be taken from sorce file, but in recieving side i did't getting.
I checked both adpters, in send adapter get the message, but the reciaver adapter not getting message. Please give me solution any one.
Thanks & Regards
Gangi Reddy.P
SAIC_INDIA
Bangalore

hi,
check this doc:
https://websmp110.sap-ag.de/~sapdownload/011000358700003141152005E/HowToMonitorccBPM.pdf
maybe it's stuck in the BPM
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

File to File using BPM & value mapping

Hi,
   I have the following scenario to do. sample file structure is given below.
source:
HDR   13052008INDIA
BDY   123456
BDY   1234567
EOF
Target:
HDR 2IN BDY 123456 EOF
HDR 2IN BDY 1234567 EOF
for the above mentioned source and target mapping. we have to use BPM and value mapping.
In the HDR row 13052008 is the date value this has to be passed to RFC function module and it will return 2, this value has to be mapped to target
And INDIA has to be mapped to IN using the value mapping option. similarly we have many coutry code.
could anyone let me know the step by step procedure to achieve this, I followed the blog https://weblogs.sdn.sap.com/pub/wlg/1926. [original link is broken] [original link is broken] [original link is broken] but it does not fit to my scenario.
help is appreciated.
Regards
RDS

Hey,
     This is a normal file to file scenario.
     You need to use RFC look up instead of value mapping.(as you need to extract 2 and IN from an RFC)
There is no need for a BPM.
refer to this blog(for RFC look up)
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
this will solve your problem.
Output of RFC look up will be 2 and IN . So use the concat function.
Other values map them directly from source to target.
Also, set the occurence for the target structure as 0 to unbounded in the mapping.(this is to be done in order to have one file for each record of the source)
You also need to configure file content conversion.(both at sender and reciever side) to convert the text file to XML on the sender side and then XML to text at the reciever side.
refer to this link for FCC.
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
This is for sender file content conversion.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
This is for reciever FCC.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
reward points if useful.
regards,
       Milan

Help: : Error in BPM (FILE to FILE)

Hi All,
I am trying out a file to file scenario using BPM and i'm following the blog "/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
But after the file gets picked up, the process fails in the call adapter step.
I see the mapping is done properly.
How to solve the issue?
And In SXMB_MONI I see the following steps are processed successfully.
Inbound msg -> receiver grouping -> Response.
and the process fails at "Call adapter" (No specific error as such, but the flag for Call Adapter is displayed as "Arrow Mark (->)" i.e Transfer to process engine.
Please find the call adapter's trace below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XI</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-05-22T08:25:54Z EST</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 95D7D260E96C11DAB2CD001438BD2DC3</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0007</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0007</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-05-22T08:25:54Z EST</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO30__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-05-22T08:25:54Z EST</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping http://abc.com/F2FBPM IM_F2F_BPM</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV" />
- 
</SAP:Trace>
Thanks
Ajay
Message was edited by: Ajay Kumar V
Message was edited by: Ajay Kumar V

Hi
I have worked on the same weblog.But its workin properly for me.I think your problem is in receiver determination.
You hav to create two receiver determination and 1 sender agreement and receiver agreement each.Please check it out.
Regards
Victoria.

Soap to File Scenario with BPM

Hi Guys
I have create my Soap to File Scenario using BPM to split the file on "Transformation step" into 7 files and it must save these files to my FTP Server, when testing on sxmb_moni I don't get any errors but when checking on the FTP server no files are created, and I understand that it should be showing all seven processing on the sxmb_moni, but that is not happening.
I have used the ForEach mode on my Block.
What could I be doing wrong.
Thanks!!
Yonela

go to runtime work bench to see communication channel, especailly the receiver channel.
To see what happened on it

Error in File-RFC-File Without BPM

Hi,
We are following this wiki
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)]
and we are getting Error: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Internal Server Error in sender communication channel monitoring. File is not picking. I think problem with the parameters that we have mentioned in module tab in sender communication channel as specified in the wiki. If we remove additional 2 parameters it is picking the file.
Please help me to resolve this issue.
Thanks.
Jyothi Anagani.

are you able to see the logs of file adapter?
go to messaging system and check the details
http://host:port/MessagingSystem/monitor/monitor.jsp
Rajesh

Need inputs for FILE-Webservice-File using BPM scenario

Hello All,
can any one tell me how to do the file-webservice(soap adapter)-file with out BPM.
If we cant do with out BPM then, please let me know after importing the WSDL file, how many Message interfaces i need to create what are they.
Thanks and Regards,
chinna

Hi Chinna,
Check this links for the receiver side SOAP configuration
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Sender side File adapter configuration is as usual
> please let me know after importing the WSDL file, how many Message interfaces i need to create what are they.
It is a synchronous scenario so you need to create the two message interfacess for the sender (one is for request message and another is for response message). For receiver you don't need to create any message interfaces, because the WSDL internally having the two messages (request and response).
Regards
Ramesh

Java.lang.NullPointer Exception in File-RFC-File wtihout BPM scenario

Hi All,
I have implemented scenario File - RFC - File without BPM in PI7.1 according to below link by bhavesh
[File - RFC - File without a BPM - Possible from SP 19.;
but I am getting error java.lang.NullPointer Exception in Audit log of sender communication channel when it enters in ResponseOnewayBean.
I had implemented the same in PI 7.0 but there it was working fine.
Is there any limitations on the use of the above beans in PI7.1 as I could see two more threads on the same unanswered yet.
Please help me in resolving as it is priority task for me
Thanks,
Amit

Sometime back I saved this SAP Note 1261159 for this error. Not sure if it is still valid. Try to get it implemented.
Regards,
Prateek

Interface mappin in File to File using BPM

Hey guys
why is it that in a asynchronous File to File scenario using BPM,we make interface mapping between outbound message interface and the abstract message interface whereas in general its between outbound and inbound message interface.also why we dont have any interface mapping between Abstract interface and inbound interface.
thanx
ahmad

Ashish,
From the link,
http://help.sap.com/saphelp_nw04/helpdata/en/43/d92e428819da2ce10000000a1550b0/content.htm
<i>Every step of an integration process uses Integration Server resources.
●      Every message that is sent to the Process Engine is duplicated.
●      Every message that is sent from the Process Engine is duplicated.
●      A work item is created for the process itself and for every step the process contains.
This means that for a process that just receives one message that is sent without being processed further, four messages and three work items are created.
For this reason, you must ensure that you take Integration Server resources into account when you define integration processes. </i>
So, by having the transformation outside the BPM , you are avoiding one message to be stored inside your BPM and therby the replication. The message that hits the BPM is the transformed message directly which avoid consumption of resources.
So, as much as possible keep mappings outside the BPM.
Regards,
Bhavesh

File to File output not received using BPM

Hi...
   I am doing simple File to File scenario using BPM. Everything id fine. But i am not getting output in receiver side.Could you please help me out in this issue.
Thanks
Leela

Let me tell you ID configuration for this blog...
1)Sender Agreement :
Sender service : Source Service interface : source_ob
Receiver service : BPM
create sender channel
2)Receiver agreement :
   Sender service :BPM    interface : target_abs
   Receiver service : Target service
3)Receiver determination 1:
Sender service : Source service interface : source_ob
Receiver service : BPM
4) Receiver determination 2:
    Sender service : BPM interface : target_abs
    Receiver service : Target
5)Interface determination 1:
      Sender service : Source interface : source_ob
       Receiver service : BPM
Inbound interface : target_abs
Interface mapping : specify the interface mapping name
6)Interface determination 2:
      Sender service : BPM interface : target_abs
       Receiver service : Target
Inbound interface : Target_IB
Interface mapping : N/A
Check the above config with ur configuration

File-webservice-file , error in BPM workflow

Hi GURUs,
I am working on file-webservice-file scenario. I have followed the blog /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit . In my BPM workflow I am getting error right at the receive step it self and not proceeding to next step. Error in workflow log saying, no proper message id for the outbound abstract interface. Main thing here is we dont have any value passing fields in our outbound request message type as well as in the request in the wsdl. In these two emssagess we have only on element hich is not of any type. Is this the reason for the error I am getting.
any help ill be appreciated,
Regards,
Reyaz

Means, in the outbond request message type and the request message type in the WSDL . in these messages we dont have a single field which can carry some value. We have an element which is not of any type like string , number etc..
Regards,
Reyaz
Edited by: Reyaz Hussain on Feb 27, 2009 3:37 PM

File to file BPM

Similar Messages

Maybe you are looking for