File to file no transformation no mapping just picking and dropping.

Hi Experts ,
I have a scenario whre I have to pick up a .txt file from Cisco directory and send it via XI using a New 3rd party SFTP adapter I have installed in XI to >>a vendor as a.txt file so XI will need to send the same file without transformation basically.
So for IR objects I dont have data Type and messge types or mapping to be defined neither a Interface mapping just picking up a file in XI and dropping it on a server using 3rd party SFTp Adapter .
Please guide on the basic steps i need to craete in IR and ID.

Hi Sunita,
You have to follow the steps described in William's Blog:
"How to send any data (even binary) through XI, without using the Integration Repository"
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
regards,
Juan.

Similar Messages

Can I just drag and drop song files into iTunes?

I have about 50 folders on my PC (Windows 7), each containing between 5 and 15 songs. These are under My Music/ on the PC.
On my Mac, I have about 1000 songs with about 25 Playlists. Some of these Playlists on the Mac contain the same songs as in the folders of the PC.
I want to transfer the songs from the PC to the Mac. I did not want to go through them one by one on each computer to see which of the files on the PC were already on the Mac.
I can look at the PC (My Music) folders and the Mac (iTunes) Playlists side by side on the Mac.
If I see a missing song on the Mac Playlist folder, can I just drag and drop that particular song from the PC folder into the Mac Playlist?
If I see that a Playlist does not exist that would need to be available for the specific folder contents on the PC, can I create the Playlist on the Mac and then, drag and drop all of the songs from the PC folder to the new Playlist?
Would this be the easiest way to accomplish the transfer of the songs?
Thanks

If I understand that all correctly then yes.

File can not be moved by drag and drop in the finder when not open Finder windows

With the operating system OSX Snow Leopard, it was possible, for example, a file from the desktop to pull drag and drop on the Finder icon, the page opened after a short and you could put the file in a folder.
At this stage I must first open the Finder to drag a file into the destination folder.
Is it a setting or is there anything wrong with my Mountain Lion properly?
It is often the case that several windows of other applications are open or in Fullscreen are, then I would, as I also already knew and am accustomed, for example a file regardless of the location from which drag drag and drop in the Finder without leaving the / program / site to open the Finder, before returning to the file then select I wanted to move.
Note: For all other programs it works.
Finder not only in where it makes the most sense.
   Picture 1: Finder window opens when you drag a file to the Finder icon
   Picture 2: Finder icon flashes but the Finder window does not open. Finder windows have previously by clicking on the icon in the Dock will be open to pull a      file into it.
   Thanks in advance for your help :-)

Yes, all I can tell you is that Finder does not have that function in ML. Your system is "working as expected".
You can file feedback here.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

You really should be doing backups with an actual backup application, especially one that will work automatically, and, if your external HD is large enough, back up your entire system. These can automatically back up only what's changed since the previous backup, and some will keep "archive" copies of things you've changed or deleted, also.
Too many things can go wrong, such as your internal HD failing, and you'll have a major project to reinstall everything.
You already have Time Machine, built-in to OSX. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
#27 in the second link mentions some alternatives, too.

How do I move photos from iphoto to imovie trailer? It says just drag and drop but it doesn't take them.

Macbook Pro imovie 11 trailer says to "just drag and drop photos" but it doesn't work????

You cannot put photos in a trailer. They are designed for videos.
However, there is a way around this.
Go to the Project Library view. Select your Trailer. Now, click FILE/CONVERT TO PROJECT.
Now you can add photos.

Why can't I just drag and drop photos from iPhoto on to my iPhone?

This has been something on my mind for a long time. For some reason I can't just drag and drop certain photos from my computer on to my iPhone. Why? There both Apple products. Shouldn't it be easier? For some reason I have to go through iTunes to select which albums I would like to import, but I'm working with raw files. My computer has over 250 gb of storage space. My iPhone has 16 gb. One of my even folders is 14 gbs. That would take up all the space on my phone. Is there a way to get around this? Why do I have to go through iTunes to put files on my iPhone?

Only Apple can answer that question, so you'll need to ask them.
But will your phone work with Raw files? If you're syncing from iPhoto via iTunes then that's not the raw file that's going over, it's the Jpeg preview from iPhoto.
As for the space issue, make an album of the photos you want to sync.

I've got my contacts in groups in my address book, i've just dragged and drop over to a numbers doc and they have disappeared..help!

I've got my contacts in groups in my address.
I've just dragged and dropped a group into a numbers doc and the process has gone wrong!
I've got the email addresses on the numbers doc but the group in basically empty...help
I've done something silly...but what?

I beleive they were synced with iCloud before I ran out of storage I then backup to my PC periodically.
My contacts switch is off, I have now slid this across and no contacts have come back. Is there any other steps necessary for me to take? Switch my phone off or reset again?
Thanks for your assistance!

Interactive boxes (e.g. google maps text box) and drop-downs from those boxes go blank white.

So for certain websites//boxes when I open them they are just blank white, or toolbars on websites will also randomly go between visible and completely white randomly as I scroll. So for example the facebook toolbar randomly goes white, when I try to check my messages//notifications it goes white, the google maps text box and all the drop downs are completely white, etc.

You can try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
You need close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

PDF File Won't print text, just watermark and image

Hello,
I have created a fillable/saveable PDF. I have one client who states that when he attempts to print it, it only prints the watermark and our logo in the upper right corner. He says that it won't save either. He has made an attempt at two different computers. There is a similar PDF we created that he can print and save properly. So far it's just the one we are having trouble with.
When we check it on our end, it works fine. We can save and print it fine. I have asked what browser he is using and await a reply.
Any ideas on a setting on his computer, browser or Adobe Reader I can have him check?
Many thanks!,
Dave

As far as the printing, he likely does not have document and markup selected. The document is the original PDF and the markup would be form fields and such.
As for saving, if he is using Reader he will not be able to save unless you have activated Reader Rights. There are license restrictions on using the activation you should read before you go on your merry way, generally restricting the number of uses (500) of the form for data collection in that case.

90% of pictures disappeared after new program. Time machine folders mostly empty. Downloaded my Carbonite file. Can I restore directly from this file or do I have to drag and drop 20,000 pix?

90% of pictures disappeared after adding Maverick. My Time Machine folders were in the right order but mostly empty so useless for restore. Repair and rebuild attempts were not effective. Downloaded my Carbonite file which is now sitting on my desktop. Is there any way to use the restore command to rebuild my portfolio or do I have to drag & drop approx 20,000 pictures? Can album groupings and faces be retained?

Do you still have the original library that was present at the time you upgraded to Mavericks? If so apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
Happy Holidays

I am trying to transfer apps that are in my iTunes library to various devices through iTunes. Music I can just drag and drop from library to device, but it will not let me do this for apps. I'm updated to all the most recent version on devices/itunes.

The weird things is that under my device Apps is not listed. This is true for both my ipad and my iphone. I do not Sync either of my devices with itunes, but do back them up. Thanks.

I'm guessing this is a problem unique to me as there have been no replies at all... Thanks a bunch folks

I've put together a slide show and cannot get it on You tube. I've put the presentation together in Iphoto, then sent it to ITune and I cannot get Youtube to accept it. On the upload page, Youtube even says just drag and drop. That didn't work. Help!

To repeat my problem, I've put together a slide presentation and am trying to get it on Youtube...have compiled photos and music under IPhoto, then moved it to ITunes to dump into YouTube, but can't get anything to go thru. Have submitted two previous slideshows and don't remember ever having this probem. Am sure I'm doing something wrong. Anyone have suggestion(s) as to how to get this on to Youtube. Have been stonewalled for the last two hours. Thank You.

Sanjam....you are having the identical problem I'm having. Re the response to your dilemma, I'm gonna see if there is a way to export. If I figure something out to get on YouTube will let you know and would appreiate you doing the same.

I use to be able to just drag and drop from a thumb drive to iTunes. This no longer works is there something in settings I missed?

The song titles show in iTunes but once I unplug the thumb drive the songs no longer play? Any help is greatly appreciated!

iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

Can't drag and drop Quicktime files into Adobe Media Encoder CS6

For some reason I can't drag Quicktime wrapped files into Media Encoder. I get this error message:
"The file [FILE PATH] could not be imported. Could not read from source. Please check the setting and try again."
I have the latest version of Quicktime installed on my system and the problem files open in QT Player without issue. Has anyone encountered this before or know of a quick fix?
I'm running CS6 on a Windows 7 64 bit system.

What's the path to the file? Is it on an external drive? A network drive? A mapped drive? Can you try copying the file to your desktop and dragging it from there?
It's on an external e-sata drive. No problem accessing the file from within Premiere. Just can't drop it into Encoder. Doesn't work if I drag to desktop and try from there either.
Are you dragging it in from Windows Explorer? If not, then what app are you dragging from?
Yes, from Explorer.
Are you dragging the actual clip or a shortcut to it?
Actual clip.
Have you tried importing via File > Add Source...? [Double-clicking a blank spot in the Queue gets you to the same Open dialog.]
Yep, tried that. No luck. Double clicking and adding didn't work either.
Definitely only seems to be QT files. Have tried H264 files from 7D camera and ProRes files. No luck. Files that are MP4 work fine.

Can't drag and drop iMovie files into iDVD project

I created a bunch of iMovie projects, went through the share/media browser process. They show up as icons in iDVD but when I try to drag and drop them, I don't get the green plus sign and they don't drop. I've tried both widescreen and standard settings, in both iMovie and iDVD, matching them up - still won't drop.

What's the path to the file? Is it on an external drive? A network drive? A mapped drive? Can you try copying the file to your desktop and dragging it from there?
It's on an external e-sata drive. No problem accessing the file from within Premiere. Just can't drop it into Encoder. Doesn't work if I drag to desktop and try from there either.
Are you dragging it in from Windows Explorer? If not, then what app are you dragging from?
Yes, from Explorer.
Are you dragging the actual clip or a shortcut to it?
Actual clip.
Have you tried importing via File > Add Source...? [Double-clicking a blank spot in the Queue gets you to the same Open dialog.]
Yep, tried that. No luck. Double clicking and adding didn't work either.
Definitely only seems to be QT files. Have tried H264 files from 7D camera and ProRes files. No luck. Files that are MP4 work fine.

File to file no transformation no mapping just picking and dropping.

Similar Messages

Maybe you are looking for