File to File Scenario: Error Occured
The following error were displayed in the communication channel monitoring for the Sender FTP Adapter
1.An error occurred while connecting to the 11.10.10.41FTP server . The FTP server returned the following error message: 'com.sap.aii.adapter.file._ftp.FTPEx: 550 CWD failed. "/XI_Test_Files/In": directory not found.'. For details, contact your FTP server vendor.
i have checked the FTP server , it is running fine.The path is also correct. even though i am getting the above error . Please try to resolve my issue.
Hi,
Open the Folder through Run Option( like //XI_Test_Files/In)
Ping the FTP Server from Run commad( like ping 172.13.12.1)
Can you Paste you Sender FTP Communication channel for more clarity
Regards
Seshagiri
Similar Messages
-
Rfc to file scenario error in sm58
rfc to file scenario error in sm58
i get the error as com.sap.aii.afccommunication.RfcAfwException
:look up of alternativehey
>>i have a doubt do we have to use
starting new task or back ground destination
well it depends upon the logic ur gonna implement,both are used for async RFC so u have to see ur requirement and then decide.
have a look at the following
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/042578488911d189490000e829fbbd/frameset.htm
thanx
ahmad -
File Compression Error Occurred on Expert Settings
I finally thought I had a decent set of settings to compress the QT movie for YouTube (and will tweak this now that each ten minute movie can be 1 gig! Hooray!). So I used what had worked on the previous movies and got the error
File Compression Error Occurred
The movie could not be properly compressed. The movie may contain some data that is invalid for the type of compression selected.
The movie itself contains imported footage from my camcorder (DV), as I usually use. And I used only iMovie stock music loops and one Sfx...all aif files.
I've tried tweaking the settings of Expert Settings here and there. Changed the 15 fps to 30. Made the Key At this point, what do I look at? Something within the movie itself? Or the settings (H.264, qual. Hi but also tried med, Frame rate tried 15 and 30, Key frame rate tried Auto and 10, Encoding multi-pass, Dimen. 640x480, Scale Letterbox. Sound is ACC, 24,000 kHz, stereo, bit rate 48kbps. Prepare for internet streaming is unchecked currently. Think it was that way when I last made a movie.
Don't know where to continue to troubleshoot this. URmpfff. Help!Wow...this is a sticky problem. I could not resave the movie as another name. Frozen program, pinwheel of death, etc. I've had about three frozen attempts since I first wrote...
Googling phrase from error message got only a few lost souls who never did post the solution. One solution someone had figured the problem was with Flip4Mac...to uninstall it, but they had problems uninstalling it. So did it...frozen computer).
I did get this solution to work to move my movie along. It saved rather quickly to a 350 meg or so full quality file on Expert settings. Then got a single .dv file. Imported that into a new iMovie project (wonderful....that I titled My Great Movie fer petes sake...Hope I remember to retitle it.
Along the way were error messages like Error 54, no permission to write to file, no hard drive space, etc. Baloney, I think...or is there any clue in all this?
Thanks. -
Hi Experts,
I am trying to create a database in my local system, while creating i am getting error like below can anyone please help me on this.
Msg 5105, Level 16, State 2, Line 1
A file activation error occurred. The physical file name ' C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\NewData\Demo_dynamic.mdf' may be incorrect. Diagnose and correct additional errors, and retry the operation.
Msg 1802, Level 16, State 1, Line 1
CREATE DATABASE failed. Some file names listed could not be created. Check related errors.
Awaiting for the response......!!
Niraj SevalkarI have created earlier database in 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA'
but now i have created one newdata folder and trying to create in it also i have checked the path what have you suggested above and the NewData folder is existed please check below snapshot
Both folders files and NewData folder which don't have any files
Niraj Sevalkar -
IDOC-XI-FILE Scenario: Error in ABAP Mapping
Dear All,
I am working on IDOC-XI-Flat FIle scenario in which I am using ABAP Mapping as per document "How To Convert an IDoc-XML
structure to a flat file and vice versa in XI 3.0".
I created one customized Idoc for this. The Idoc is reacing XI but its flat file is not getting created. Its giving me following error:
<SAP:Stack>Error in mapping program Z_ABAP_MAPPING_PACKING_LIST (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
I have also gone thru threads posted for the same topic earlier but still I am not been to resolve this error.
Please help me out in resolving this error.
Regards,
N.JainHI,
Log saying that, u have problem in the mapping program.
i.e Z_ABAP_MAPPING_PACKING_LIST
the problem is due declaration of data.
i hope that, you have some methods.
those are declared under intialization section in mapping program.
please use start of selection before the method.
other wise, it will come under intilization section.
warm regards
mahesh. -
hi all,
i have a scenario that send data from WS to file. when testin my scenario im getting this error in MONI.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID 7511E1BD8936326C8D0921454679DCF3 Software Component ACE2E030363111DDC1F2D3CB0A010675</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Interface mapping Object ID 7511E1BD8936326C8D0921454679DCF3 Software Component ACE2E030363111DDC1F2D3CB0A010675 does not exist in runtime cache</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
So, i do a CPA cache refresh full mode but nothing change. later others test i do an stop sap because the runtime cache seam no refresh but im getting same error after that.
to test if the error occur in all case create a file CC and add it to sender agreement and scenario work without any error.
what is happening in WS scenario? basis team installed SP14 a few day ago. could it affecting?
Thanks for your help
RodrigoYou can also check the Error Log in the Visual Administrator, this will give you an accurate idea of the problem.
Check whether the standard service user did not have the java roles properly assigned to it in the Java stack (Visual Administrator).
Also do these
Just refresh the CPACache & SXI_CACHE. -
'Error occured while converting the file--unknown error occured 0x77686174
I just got my first iPod but I'm a little frustrated. I put in a cd, iTunes opens and asks me if I want to import the songs, I reply yes. When it tries the very first song of the cd, it immediately comes up with 'Error occured while converting the file "name of song". An unknown error occured (0x77686174).' It doesn't matter if this is a completely new cd or an older one.
I ran CD diagnostics on iTunes and my results are below. I have posted this several times on many different boards and haven't found any solutions or been given any solutions from anyone. I have an iPod that I can't use because I can't download any songs...does anyone have any idea what to do?
I've looked at Dell to update drivers for my cd drive but it says that I have the newest drivers...the computer isn't even a year old yet. What do I do?? I've wiped the cd like several posts say to do, I've clicked the fix error option on cd off and on like several posts have said to do, I've changed the conversion of 128 to 64 like several posts have said to do...help please, anyone?
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Inc. Dell DM051
iTunes 7.3.1.3
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
RADEON X300 SE 128MB HyperMemory
RADEON X300 SE 128MB HyperMemory Secondary
Connected Device Information:
Disk drive, ST3160812AS, Bus Type ATA, Bus Address [0,0]
Disk drive, TEAC USB HS-CF Card USB Device, Bus Type USB
Disk drive, TEAC USB HS-MS Card USB Device, Bus Type USB
Disk drive, TEAC USB HS-SD Card USB Device, Bus Type USB
Disk drive, TEAC USB HS-xD/SM USB Device, Bus Type USB
CD-ROM Drive, TSSTcorp CDRWDVD TS-H492C, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: TSSTcorp CDRWDVD TS-H492C, Rev DE02
Audio CD in drive.
Found 12 songs on CD, playing time 54:35 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:30:32
Track 3, start time 09:38:25
Track 4, start time 14:58:53
Track 5, start time 18:01:08
Track 6, start time 21:24:57
Track 7, start time 26:37:43
Track 8, start time 32:16:51
Track 9, start time 36:17:54
Track 10, start time 41:57:36
Track 11, start time 46:21:38
Track 12, start time 51:48:24
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 48.
The drive CDRW speeds are: 48.I came across your error code in iLounge, this post might help you out: http://forums.ipodlounge.com/showthread.php?threadid=30496
-
Hell Experts,
I have done desgin and configuration from Idoc to File Scenario in XI Intergration server.
Source is R/3 and Target system is File. I have successfully configured each and every step. Send Idoc from R/3 to Intergration server and run sxi_cache. But I didn't get successful results, always the error message shows in SXMB_MONI as follows:
Ackn Status contains system error
During the application mapping com/sap/xi/tf/_CUST_MMAP_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeExcep
tion in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
My system Patche level as follows:
SAP_BASIS 640 0012 SAPKB64012
SAP_ABA 640 0012 SAPKA64012
PI_BASIS 2004_1_640 0009 SAPKIPYI69
SAP_BW 350 0009 SAPKW35009
The above error is related to patches problems or any Mapping problems ?
Please help me.
Advanced Thanks.
Regards,
ChandraHi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
i am not sure of the patch levels.
Regards,
Anirban. -
IDoc to File Scenario Error ( IS - Retail )
Hi all ,
I was trying scenario IDoc (SAP ECC 6.0) (IS-Retail) to File scenario .
When i trigerred IDoc from ECC system , it's showing sent successfully to external system or program.
But the problem is it's not coming inside XI sxmb_moni .
I have checked the ALE Configuration and SLD configuration .
Everything is fine.
When i run the TCODE WE05 for IDocs List in XI , it's getting stucked there and the Error showing is
"IDoc: 0000000000000028 Status: IDoc with errors added
External segment name E2WBB01003 cannot be interpreted "
Even i tried with other IDoc WPDWGR it is showing the same error
"IDoc: 0000000000000029 Status: IDoc with errors added
External segment name E2WPW01 cannot be interpreted"Hi Ashwin,
Please check :
1.The SAP system from which you want to import the IDocs contains function modules for calling metadata.
2.You can import IDocs from SAP Release 4.0 and higher.Support Packages Required for IDoc Imports:
Release Minimum Support Package Requirement
40B SAPKH40B48
45B SAPKH45B26
46A SAPKB46A20
46B SAPKB46B12
46C SAPKB46C05
3.check for the authorizations required to import.
Also see SAP Notes 677732 (authorizations), 672745 (missing function modules), 212011 (access to IDoc metadata), and 718320.
check http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a6095507d11d18ee90000e8366fc2/frameset.htm
*Pls: Reward points if helpful*
Regards,
Jyoti -
Seeburger IDOC-to-File scenario: Error using Classifier module
Hello,
I am running the following scenario: ORDERS.ORDERS05 IDOC -> XI -> X12 850 4010 File.
In the file receiver channel, I am using Seeburger's Classifier and BIC modules as follows:
localejbs/SeeClassifier classifier
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
classifier attID classifierAtt
classifier destSourceMsg MainDocument
classifier showInAuditLog true
bic classifierAttID classifierAtt
bic destEncoding UTF8
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic mappingName AUTO
bic newLine true
bic srcEncoding UTF8
After conversion in XI, the file fails to write to the folder because of this error:
Message processing failed. Cause: javax.resource.ResourceException: ---
Conversion of synchronous request from module chain ended with errors
---Error: [Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping:
See_XML_AnsiX12 you are trying to load cannot be found in the classpath!
Maybe you forgot to compile or to activate the mapping! DESCRIPTION:
BICMapping Error: The mapping [not specified] you are trying to load cannot
be found in the right path! Maybe you forgot to compile or to activate the
mapping!
When I set the mapping directly to See_X2E_AnsiX12_850_V4010 instead of using the Classifier module, the configuration works fine. But I want to design the receiver channel to be able to receive all types of EDI messages coming from XI.
I am only facing this problem for the IDOC-to-File scenario. Somehow the same configuration works for a File-to-IDOC scenario.
I talked to our Basis team and they said that the map See_XML_AnsiX12 does not exist in Seeburger's delivered content, although I believe that it should be. Has anyone encountered this problem before?
Any suggestions would be appreciated.
Thanks,
ArianneHi Yomesh,
Here is the payload.
<?xml version="1.0" encoding="UTF-8"?>
<LIST>
<S_ISA>
<D_I01>00</D_I01>
<D_I02/>
<D_I03>00</D_I03>
<D_I04/>
<D_I05>ZZ</D_I05>
<D_I06>CELORGS01</D_I06>
<D_I05_2>ZZ</D_I05_2>
<D_I07>AVX</D_I07>
<D_I08>032008</D_I08>
<D_I09>1718</D_I09>
<D_I10>X</D_I10>
<D_I11>00401</D_I11>
<D_I12>000000008</D_I12>
<D_I13>0</D_I13>
<D_I14>T</D_I14>
<D_I15>^</D_I15>
<S_GS>
<D_479>PO</D_479>
<D_142>CLS01</D_142>
<D_124>058895921</D_124>
<D_373>20080320</D_373>
<D_337>1718</D_337>
<D_28>8</D_28>
<D_455>X</D_455>
<D_480>004010</D_480>
<S_ST>
<D_143>850</D_143>
<D_329>800001</D_329>
<S_BEG>
<D_353>00</D_353>
<D_92>SA</D_92>
<D_324>4500005037</D_324>
<D_373>20051110</D_373>
</S_BEG>
<S_CUR>
<D_98>BY</D_98>
<D_100>USD</D_100>
</S_CUR>
<S_FOB>
<D_146>CC</D_146>
<D_309>OR</D_309>
<D_352>FREE CARRIER</D_352>
<D_334>02</D_334>
<D_335>FOB</D_335>
<D_309_2>DE</D_309_2>
</S_FOB>
<S_ITD>
<D_336>01</D_336>
<D_333>3</D_333>
<D_351>45</D_351>
</S_ITD>
<G_SN9>
<S_N9>
<D_128>L1</D_128>
<D_369>GEN</D_369>
<S_MSG>
<D_933>TEST</D_933>
</S_MSG>
<S_MSG>
<D_933>MESSAGE</D_933>
</S_MSG>
</S_N9>
</G_SN9>
<G_SN1>
<S_N1>
<D_98>BY</D_98>
<D_66>92</D_66>
<D_67>6310</D_67>
<S_PER>
<D_366>BD</D_366>
<D_93>Graham Crawford</D_93>
</S_PER>
</S_N1>
</G_SN1>
<G_SN1>
<S_N1>
<D_98>BT</D_98>
<D_66>92</D_66>
<D_67>6310</D_67>
</S_N1>
</G_SN1>
<G_SN1>
<S_N1>
<D_98>SE</D_98>
<D_93>3M COMPANY</D_93>
<D_66>92</D_66>
<D_67>0000019591</D_67>
</S_N1>
</G_SN1>
<G_SN1>
<S_N1>
<D_98>ST</D_98>
<D_93>SAMPLE</D_93>
<D_66>92</D_66>
<D_67>6310</D_67>
</S_N1>
</G_SN1>
<G_SPO1>
<S_PO1>
<D_350>00010</D_350>
<D_330>10.000</D_330>
<D_355>EA</D_355>
<D_212>10</D_212>
<D_639>PE</D_639>
<D_235>BP</D_235>
<D_234>230-1812-01JDS</D_234>
<D_235_2>EC</D_235_2>
<D_234_2>A00000000000002</D_234_2>
<G_SPID>
<S_PID>
<D_349>F</D_349>
<D_352>TIE WRAP,LOCKING,PANDUIT-PLASTIC PART C</D_352>
</S_PID>
</G_SPID>
<S_REF>
<D_128>CO</D_128>
<D_127>4500005037-00010</D_127>
</S_REF>
<G_SSCH>
<S_SCH>
<D_380>10.000</D_380>
<D_355>EA</D_355>
<D_374>002</D_374>
<D_373>20051208</D_373>
</S_SCH>
</G_SSCH>
</S_PO1>
</G_SPO1>
<G_SCTT>
<S_CTT>
<D_354>1</D_354>
</S_CTT>
</G_SCTT>
<S_SE>
<D_96/>
<D_329>800001</D_329>
</S_SE>
</S_ST>
<S_GE>
<D_97>1</D_97>
<D_28>8</D_28>
</S_GE>
</S_GS>
<S_IEA>
<D_I16>1</D_I16>
<D_I12>000000008</D_I12>
</S_IEA>
</S_ISA>
</LIST>
Thanks,
Arianne -
File scenario error in Used defined function
Hi Everyone,
I was doing file to file scenario, i want to get the same source file name in target also.
I created the structure as FileName, Company, Address. I did direct mapping for Company and Address
but for field FileName, i created a userdefined function as i want the same file name.
I mentioned the following code in Used defined function
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
When i test the mapping in IR, with sample data, i am getting this error.
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:Target_File_MT/FileName. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Source_File_to_Target_File_MM_ method DynamicFile$[, com.sap.aii.mappingtool.tf3.rt.Context@1763e46]
Could anyone please help me with the issue.
I have done only IR part, I didnot configured ID.
Regards,
Varun.HI,
Check Adapter Specific Message attributes.This blog will help you
The specified item was not found.
You can also go for variable substitution :-
When you specify the target directory and file name schema, you have option of setting variables and defining them in a table. The variables are replaced by elements from the XML structure at runtime.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/464442c1a1c253e10000000a1550b0/content.htm
links on the dynamic variable substitution
The specified item was not found.
The specified item was not found.
Dynamic File Name Part 1
Dynamic File Name using XI 3.0 SP12 Part - I
Dynamic File Name Part 2
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
Thanks -
File to File scenario Error: Module Exception
Hi guys,
I'm setting up a very simple file to file scenario in XI 3.0
After doing all the set ups in Desing and configuration. In the Adapter Monitor, I'm getting the following error for the SENDER File Adapter:
Sender Adapter v1014 for Party '', Service 'BS_File_transfer':
Configured at 16:00:16 2008-02-20
Last message processing started 16:06:01 2008-02-20, Error: Module exception java.lang.ClassCastException found last retry interval started 16:06:01 2008-02-20
length 5,000 secs
Does anyone migth no what could be the problem? There are very simple mappings, 1 to 1, no conversion of any kind.
Thanks
FelipeRaj,
Please note that the Scenario that I'm setting up it is simple FILE to FILE scenario.
The error showed in the Adapter Monitor is this one:
Sender Adapter v1014 for Party '', Service 'BS_File_transfer':
Configured at 19:15:28 2008-02-20
Last message processing started 19:24:23 2008-02-20, Error: Module exception java.lang.ClassCastException found
last retry interval started 19:24:23 2008-02-20
length 5,000 secs
The JDBC Driver error (what I told you, relates to the driver, connection, etc)
Sender Adapter v0915 for Party '', Service 'BS_File_sinMM':
Configured at 19:03:51 2008-02-20
Processing Error: Loading jdbc driver 'oracle.jdbc.driver.OracleDriver' failed: java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
Found in negative cache
Loader Info -
ClassLoader name: [service:com.sap.aii.adapter.jdbc.svc]
Parent loader name: [Frame ClassLoader]
References:
service:com.sap.aii.af.cpa.svc
service:com.sap.aii.af.ms.svc
service:com.sap.aii.af.svc
service:com.sap.aii.adapter.xi.svc
library:com.sap.aii.af.lib
library:com.sap.aii.messaging.runtime
library:com.sap.xi.util.misc
common:service:iiop;service:naming;service:p4;service:ts
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:com.sap.security.core.ume.service;service:connector;service:dbpool;service:keystore;service:security;service:userstore
library:ejb20
library:sapxmltoolkit
library:com.sap.guid
library:com.sap.tc.Logging
library:jms
Resources:
C:\usr\sap\DEX\DVEBMGS04\j2ee\cluster\server0\bin\services\com.sap.aii.adapter.jdbc.svc\aii_adapter_jdbc_svc.jar
Loading model: {parent,local,references}
Available JDBC drivers:
No deployed JDBC Drivers found
Still here...
Felipe
Edited by: Felipe Andres Contreras on Feb 20, 2008 11:24 PM -
Hello All,
I have done new server installation and doing File to File Scenario .while doing this scenario file was picked but my error is "no message are available in the SXI_MONI".I checked Adapter Monitoring Source Communaction channal was green status and Up and running: Last message processing started reciver communaction channel also green status but Up and running - no message processing until now.finely i did not get out file in the reciver adapater.so pls gudie me .
regards,
ramesh.Hi,
1. try setting all loggins on (except syncs you won't need then in file to file scenario)
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
2. try checkking if your file was sent from the adapter framework to the integration engine with this monitor:
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
Regards,
michal -
Hi All,
I am trying a Flat File 2 File Scenario ...
my input file is..
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:MTYP_name xmlns:ns0="File_File">Mustafa</ns0:MTYP_name>
I am just doing simple mapping of single field, but I am getting the following error..
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>internal server error: com.sap.aii.messaging.mo.MalformedMessageException: Cannot find Main Header in XMBMessage - check the message version</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html> <head> <title>Transport Service Error</title> </head> <body> <h1>HTTP/1.0 500</h1> <h3>internal server error: com.sap.aii.messaging.mo.MalformedMessageException: Cannot find Main Header in XMBMessage - check the message version</h3> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 500 with the description internal server error: com.sap.aii.messaging.mo.MalformedMessageException: Cannot find Main Header in XMBMessage - check the message version XML tag Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What is the cause of this error and also how do I change the trace logging levels?
regards,
MustafaHi Raj,
Iam sending the Inbound payload
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_DB2_S_FF xmlns:ns="http://gsll.com/DB2">
- <RSETSTRUCT>
<S1>A</S1>
<S2>A</S2>
<S3>A</S3>
</RSETSTRUCT>
- <RSETSTRUCT>
<S1>B</S1>
<S2>B</S2>
<S3>B</S3>
</RSETSTRUCT>
</ns:MT_DB2_S_FF>
regads,
Jeevan -
Hi,
In a simple file to file scenario
I wanted to send a text file (notepad) but i wanted to receive it as a xml file---is it possible ?
I got the following status information in sxmb_moni. I want to what is the error? anybody pls help me out in this ?
During the application mapping
com/sap/xi/tf/_f2xml_mm_ a
com.sap.aii.utilxi.misc.api.BaseRuntimeException
was thrown: RuntimeException in Message-Mapping
transformatio~Hi Pankaj,
XI understands ONLY XML. All messages to and from XI are always XML messages.
Now, if the file being placed by your Legacy System is not going to be an XML file, then you can use the content conversion of your sender File adapter to convert this non XML file to an XML file.
Basic point, all messages that reach the inegration engine of XI need to be in XML format and so you need content conversion to conevrt non xml to xml and vice versa.
Please go thru the links provided by Chandra and also the following links for step by step procedure to do the same:
http://help.sap.com/saphelp_erp2005/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
And in your case once you do the content conversion at the sender side, the rest of the steps are the same as any File to file Scenario... For a sample file to file Scenario go through my reply in thread given,
Re: File To File
I hope I have answered your query.
Regards,
Abhy
Maybe you are looking for
-
Requerying a report after an insert button is presses on a form
We have created an On-line Registration system using Portal. A student runs a report displaying courses from which they can register from to add to their profile. We would like to have the report requeryed after the client has clicked on the insert b
-
I installed Windows 7 and my Pavillion dv6500 no longer recognizes the CD/DVR drive. It's not even in the device list!
-
Security on vendors address and bank account numbers
Hi Gurus, Do you know if there is a way not to display the adress and the bank account number of a vendor let's say in the transaction FB60 ? Thanks ! JP
-
I'm running FCP 4.5 on my G4 PowerBook. Every once in a while when I open an existing project I get the notice "Missing clip so and so." This has been an on going problem with me since I started FCP. I just don't seem to be able to understand where t
-
Multiple File Attachment Column in Document Library (SharePoint 2013)
Hi All, As per default, i will have only one column to attach documents in Document Library . But i need to add multiple column for documents attachment in same row. e.g. See below column 1)Project Name 2) Attachment 1 3) Attachment 2