File to file scenario from r/3 to xi

hi
could any one send me the file to file scenario from r/3 to xi
wat could be the source file path in this scenario

please llok at the docs for file scenario
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
source file path will be your file directory path it dependent on your file folder it is not common for every one.
Regards
Sreeram.G.Reddy
Message was edited by:
Sreeram Reddy

Similar Messages

Triggering an HTTP to file scenario using UDF

Hi,
Is it possible to trigger an http to file scenario from UDF? If it is possible can anyone tell me how it can be acheived.
regards,
Meenakshi

hi,
can u tell me how this could be possible?
my requirements are such that we are collecting some data in UDF and creating an xml. this xml is sent to another scenario using HTTP adapter. this adapter need to be triggered from the UDF.
please let me know how this can be done.
regards,
meenakshi

File to file scenario receiver determination

Hi experts,
While I am working on file to file scenario from the source it is deleting the file but
it is not able to create the file again because in the receiver aggrement I given
parameters to create and even I am not able to see any message in the sxmb_moni transaction it is simply saying no message i am in confusion that whether my process is wrong or it is installation problem.
Thanks in advance,
Srinivas.

Hi Srinivas,
Check the status of file adapter in RWB.
Follow this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39fe8fa0446
and check this weblog as well.
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Sachin

File to JDBC to File Scenario

Dear Bhavesh,
I am doing a File to JDBC to File Scenario from your reference blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3928. [original link is broken] [original link is broken] [original link is broken] [original link is broken] This scenario is same as File to RFC to File scenario I believe. The only change I found is in Message Interface.
The Message Interface used here are:
1.     OB File Request
2.     OB Abs File Request
3.     IB File Response
4.     IB Abs File Response
5.     Abs Syn File Request File Response
6.     Abs Syn JDBC Request JDBC Response.
I am able to get the response from JDBC but while mapping to file I am getting mapping error. In fact I have followed ur Blog as it is.
The IP steps are:
Receive Step , Syn Send (Abs Syn File Request File Response) Step , Send Step.
Could you please help me out, if you have time .
Thanks in advance.
Shaik

Hi ,
Sorry for pointing you the thread.
I have created the IR as it is in File RFC File Scenario, but I have created Abs Syn Message Interface for JDBC request and Response.
I have two Abs sync Message Interface and two mapping programs, namely
Source Interface:
Abs Sync Message Interface
   File Request
   File Response
Target Interface:
Abs Sync Message Interface
JDBC Request
JDBC Response
Mapping Interface:
File Request to JDBC Request
JDBC Response to File Response.

Unable to get filename from mail to XI to file scenario

Hi
How could i get the name of an attachment to be used as the file name on my File Adapter in a Mail to file scenario?
I recieve the files as attachments and I have used the payload swap bean to swap my actaull message content to attachment. That works perfect, the contents of the file are saved successfully on my file system. The file is sent as a plain text file and not xml and no mapping is done, I just get the files from the mail and save them into a file server for further processing.
Your help will be highly appreciated
Ronny

Hi
I have installed my Module, but when I try to call it from within the adapters I get an error
exception caught during processing mail message [614]com.sap.aii.af.mp.processor.ModuleProcessorException: Error during processing local bean: localejbs/mailAttachmentFileNames caused by: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of mailAttachmentFileNames.
I have searched all the logs and the module is active. I even restarted my J2EE engine, twice but still nothing..
please assist
Ronny

How To Test Idoc To File Scenario in ID From Tools- Test Configuration

Hi All,
Can any body help me in step by step process including screenshots for testing Idoc to file scenario in integration directory from tools->test configuration.
My scenario is passing the PO Idoc data from R/3 into a file using XI.
i have processed the idoc from R/3 and now i went to sxmb_moni in XI system and took the payload xml data.
In ID I have navigated to test configuration from tools then i have provided the following information.
Sender Service : Business system of R/3 b'coz here R/3 is the sender.
Sender Interface : ORDERS.ORDERS6
Receiver Service : Business system of XI b'coz here XI receives the data and places it into a file
In payload text box i have copied the xml code which i have taken from sxmb_moni and clicked the run button. then i got the following error:
Sender Agreement
Internal Error
 HTTP connection to ABAP Runtime failed.
 Error: 403 Forbidden
 URL: http://bxdci.boewe.custservice.de:8093/sap/xi/simulation?sap-client=100
 User: PIDIRUSER
Kindly look into it and correct me if iam wrong or is there any other way to test this scenario in ID please suggest.
Thanks & Regards,
Venkat

Hi Venkat,
Specify the test confisuration as follows.
Sender
Service : Business System of SAP R/3 System
Interface : The outbound message interface name of type the IDOC.
Namespace : will automatically loaded when u select the Interface. Check if it the correct namespace.
Receiver:
Service : Business System name for the Fle system.
Paste the payload that u copied from the sxmb_moni.
Now click on Run and test ur Scenario.
Was the scenario sucessfull in the Message Monitor.
Regards
Santhosh

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

Reciver File channel unable to get message from Xi in file- file scenario

Hi All,
I have done a small File to File scenario.
Sender file adapter receiver the file and gives it to XI, then deletes the file from that directory.
Receiver is unable to get the file.
I have a message mapping defined for the receiver which concatenates two fields from one message type and transforms it to another.
I have configured the scenario.
When I check the adapter stats Sender channel picks the Xml deletes it from the directory.
Sender channel:
Sender Adapter v1014 for Party '', Service 'SourceFileBS':
Configured at 04:25:50 2006-06-03
Up and running: Last message processing started 05:10:50 2006-06-03
last poll interval started 05:10:50 2006-06-03
length 60,000 secs
Receiver channel:
Receiver Adapter v1027 for Party '', Service 'TargetFileBs':
Configured at 04:25:50 2006-06-03
Up and running - no message processing until now
I configured the scenario (receiver agreement, determination, sender agreement, and interface determination).
Instead of Business systems, I Configured Business services (Virtual) for inter company communication.
XI is unable to give the message to the receiver channel.
Please help me to debug the scenario.
Regards,
Meher

Hi All,
Thanks for all your Responses.
I see a high payload in my monitor belonging to some other process ( shipped with XI) MAT_LEGACY.
The scenario which I executed is showing up a status of scheduled
Adapter has picked the message at 01:59:37 2006-09-12
and start time and the end time of the message is shown as
01:59:37 2006-09-13 in the XI monitor with a status of scheduled .
can I purge the sceduled messages for MAT_LEGACY scenario?
if yes how do i do that?
is this causing a problem for the file not being received by receiver?
when i go to the transaction manager with SMQ1 with the client 100 i see the queue on which the above message is persisted with a queue status of ready.
help me.
Regards,
Meher

Removal of Namesapce from generated target file in RFC to file Scenario

I am working on RFC to File Scenario. In target file we are getting the target namespace also. we need to remove it from the target file but how?
Thanks
Anuj Agarwal

Anuj,
Go to the Message Type you have created for your File.
You will see a field called Namespace. Just remove this / Delete this , and activate your message type.
Relaod the message type in the message mapping and now the namespace will not occur in the target.
Regards
Bhavesh

How to trigger alerts from UDF for file to file scenario

Hi,
My scenario is something like this.......
I have lookup in which there exists more than one output value corresponding to this one input value.In such cases i need to raise an exception and trigger an alert from UDF so as to inform the functional team.
Now this entire procedure has to be implemeted for file to file scenario.
I am not using any RFC nor do i need a BPM.
Entire scenario should be excuted without BPM and RFC.
Can anyone kindly suggest me as to how to proceed for this so as to trigger alerts
from UDF.
Thanks in advance
Madhu

HI,
Please see the below links
Triggering XI Alerts from a User Defined Function - /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) - UPDATED - /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
Regards
Chilla

Mapping issue from Invoice (Idoc - file) scenario

Dear All,
I am working on Idoc to File scenario and i have a requirement like..
INVOICE02
   E1EDP01
        E1EDP05
              BETRG
        E1EDP05
              KSCHL
              BETRG    etc
condition :
If KSCHL not equals to space then map all BETRG's to a target field which is not mandatory.            Sometimes E1EDP05 may not contain KSCHL and when i set the context to E1EDP05 level its not considering the BETRG values, it behaving lik taking up the condition part and summing part seperately.
It would be really great if anybody comes up with some ideas.
Thanks a lot
Hari

KSCHL ----> exists
                                             -----------------------> And ------->ifWithoutElse -------------> Target
KSCHL                                                                            Then(BETRG)
                 -------> equalS ---> Not
Constant(blank)
Context of KSCHL should be above that of E1EDP05
I hope that Target node is repeating -
0...unbounded.
Regards,
Abhishek.

Dynamic file name from input payload (RFC 2 flat file)

Hi,
I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
What can I do?

Hi Marshal,
You can add a extra node to your target strucutre like
FileName- Node
--FileName - Element.
do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this field path at Refrence in variable subtituion.
In the Content converison add the Name & Values as below
FileName.fileldNames -- FileName
FileName.fieldFixedLengths -- 0
FileName.fixedLengthTooShortHandling -- Cut
So the extra field in u r target structure would not populate in u r target text file.
Cheers
Veera

How to use a existing Business Service in IDoc-File Scenario

Hi Experts,
I am new to XI.
I am working on a IDoc to File scenario where in i am importing the CREMAS.CREMAS03 IDoc from the R/3 System.
When i try to create a Business Service in Configuration Scenario Object in Integartion Directory, i get a message saying "SAP system ID ER1 and client 800 already exist in service | CLNT800ER1".
Can i reuse this Business Servie in my Configuration Object?
If yes, can you please guide me How to go about it?
Thanks for the effort.
Cheers
Gaurav Raghav

U may directly use it.
Just select the business service wherever required. It is not necessary that the Business Service is present in ur configuration scenario. But if u still want it, u may add it using "Add to Scenario" option from other configuration scenario or from Objects tab
Regards,
Prateek

Issue in IDOC-File Scenario

Hallo Everybody,
In one of the requirements,for the interface design which involves IDOC-FILE scenario we have a req as:-
Multiple IDOCs would be sent from SAP R/3 to SAP XI. Each IDOC can have 0-4 segments and for each segment a file needs to created.
The files needs to be FTPed to a location, only if all the IDOCs have been processed successfully.
Requirement:
1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
2) We need to send a notification from XI, in case any IDOC processing fails.
3) How do we check in XI, if all the IDOCs have been processed successfully.
Please suggest me with some good stategies to resolve this issue.
Appreciations and Rewards in line.
Regards,
Younus

Hi
Are you planning to use BPM as it suits your requirement.
To collect the idocs in small bunches refer
Collecting IDocs without using BPM
1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
BPM will allow you to wait for the time all IDOC are processed
2) We need to send a notification from XI, in case any IDOC processing fails.
BPM exception handling will allow this functionality even to the exact field you want to send notification
3) How do we check in XI, if all the IDOCs have been processed successfully.
Set Acknowledgment for IDOC's
refer
Posting multiple IDocs with Acknowledgement
Thanks
Gaurav

In idoc to file scenario, if XI system is down where do idocs pile up?

In idoc to file scenario, if XI system is down where do idocs pile up (get stuck)
what tcode can I use to reprocess it?

Sender System ,Check BD87 .. you will see alll the IDOCs in Yellow state ..
You can reprocess all the IDOCs in go from there .. if only they are in yellow state ...
regards
PS

File to file scenario from r/3 to xi

Similar Messages

Maybe you are looking for