File to idoc and no mapping?

Hi
We are using PI 7.0
IDOCFileSender->PI7.0->ALERECEIVER
we have a file in the "native" file format for an idoc, we now would like to process this file through PI and sending it to our SAP systems ALE layer. We are not allowed to call the ALE adapter directly in our SAP system from the system generating the native idoc format - it must be done only through PI !
My question is if it is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping? In that case what should the Message Type we are using in the file-sender adapter look like?
Hope for some help.
Thx

Hi,
>is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping?
yes
>In that case what should the Message Type we are using in the file-sender adapter look like?
If you have no mapping it doesnt matter, the message type will not be validated during runtime. You can take the IDoc type imported from the SAP system
Regards,
Udo

Similar Messages

Pass through scenario in SAP PI with no mapping for File to IDoc and Idoc to file scenarios

Hi Experts,
Can i have step by step process in SAP PI for pass through scenario with no mapping in case of file to Idoc and Idoc to file both cases please.
What objects i can skip.
My PI system is 7.3 dual stack.
I have seen below blogs, still its confusing to me.
When and how to create an scenario in SAP PI without mapping objects.
Pass Through Scenario with no Mapping in PI 7.1
Appreciate your help on this.
Regards,
Mohan.

Hi Mohan
In pass thru interface you don't need to create any ESR objects, only ID objects are required.
Just Create a Receiver Determination and Receiver Agreement for your scenario (no need for Interface Det. and Sender Agreement).
Specify the IDOC in the Sender Interface and namespace as urn:sap-com:document:sap:idoc:messages
Or instead of creating objects manually, Run the wizard with Idoc name/namespace in sender/receiver interface
Regards
Osman

PI 7.1 scenario -- File to File , File to IDOC and IDoc to File Scenario

Hi All,
*I have PI 7.0 . I have in that File to File , File to IDOC and IDoc to File Scenarios*
File to File -- This scenario is working fine.
File to IDOC -- Setting done in PI 7.0 like SM59, IDXI, IDX2 and in R/3 like SALE (logical system)--- This scenario is working fine.
IDoc to File -- Seeting done in R/3 like SALE (Logical system, Distrubtion Model (Port, Partner Profile)) -- This scenario is working fine.
Now I need to move to PI 7.1 -- for File to File , File to IDOC and IDoc to File Scenarios.
Please let me know do I require to make any changes in Design and Configuration and settings in PI 7.1 and R/3 for above scenarios or it will work fine as it is already working for PI 7.0
If changes are required please let me know what changes to do for each scaenario and pls also send blogs for that.
Regards

>
Rickkk wrote:
> Hi,
>
> Idoc metadeta is updated through idx2?
>
> Regards
If there is no metadata maintained for an idoc type, the metadata for that idoc type gets loaded when an idoc of that type is received by PI for the first time. If you are looking at loading metadata of all idoc types before the first run, its really not required. Just make sure that the port is configured properly. Although, there is no harm in preloading the metadata using IDX2.
You need to use IDX2 mandatorily when the the metadata changes and the metadata in ECC and PI is different. In that case, you need to delete metadata for the changed IDoc type and then either you can update the metada through IDX2 or let the system take care of.

IDoc and Message Mapping

Hi,
I have a question.
In a idoc to file scenario,idoc as a sender,.If the idoc is updated in r/3 system due to some change request after we finish the mesage mapping,what steps need to be followed to ensure the correct mapping.
Do we need to change the mapping.
Regards,
Haritha

Hello,
if just the values of your IDoc changed you don't have to change
your message mapping.
If the structure has changed you have to reload the metadata (idx2)
and the IDoc in your Repository and then update your message mapping with reloading your IDoc.
Regards
Patrick

File to IDOC Senario (Message Mapping)

Hi Experts,
I am a fresher.
This is " File to IDOC Senario ".
I have Doubt on this: ( In Message Mapping)
Source field : MSG
Length : 1/264
Taget field : E1EDKT2 - TDLINE
Legth : CHAR/70
Mapping Condition :
Note: TDFORMAT = ‘=’ (Long Line), until next line of MSG. When new line occurs in MSG, then use TDFORMAT = ‘/’
How to Make the Mapping for this?
Anyone Can help me to get it Quickly.
give your Suggestions and Show some Example Mappings......

Hi ,
Below is the generic sol for your problem .Graphical mappings wont workout for your problem while using sub string .
Input -->Input string
Length -->length of TDLINE
MESSAGE_V1,V2,V3,V4....depends on how many TDLINES you expect .Here I have taken 4 .
public void SplitbyLength(String[] Input, String[] Length, ResultList MESSAGE_V1, ResultList MESSAGE_V2, ResultList MESSAGE_V3, ResultList MESSAGE_V4, Container container) throws StreamTransformationException{
int lengthVal = Integer.parseInt(Length[0]);
int InpLenVal ;
for(int i=0;i<Input.length;i++)
InpLenVal =Input[i].length() ;
if (InpLenVal<=lengthVal)
MESSAGE_V1.addValue(Input[i].substring(0));
MESSAGE_V2.addValue(ResultList.SUPPRESS);
MESSAGE_V3.addValue(ResultList.SUPPRESS);
MESSAGE_V4.addValue(ResultList.SUPPRESS);
else if ((InpLenVal>lengthVal) && (InpLenVal <= (lengthVal*2)))
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,InpLenVal));
MESSAGE_V3.addValue(ResultList.SUPPRESS);
MESSAGE_V4.addValue(ResultList.SUPPRESS);
else if ((InpLenVal>(lengthVal*2)) && (InpLenVal <= (lengthVal*3)))
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,(lengthVal*2)));
MESSAGE_V3.addValue(Input[i].substring((lengthVal*2),InpLenVal));
MESSAGE_V4.addValue(ResultList.SUPPRESS);
else if (Input[i].length()>(lengthVal*3) && (InpLenVal <= (lengthVal*4)))
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,(lengthVal*2)));
MESSAGE_V3.addValue(Input[i].substring((lengthVal*2),(lengthVal*3)));
MESSAGE_V4.addValue(Input[i].substring((lengthVal*3),InpLenVal));
else if (Input[i].length()>(lengthVal*4) )
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,(lengthVal*2)));
MESSAGE_V3.addValue(Input[i].substring((lengthVal*2),(lengthVal*3)));
MESSAGE_V4.addValue(Input[i].substring((lengthVal*3),(lengthVal*4)));
Regards
Venkat

File to (IDOc and File)

Hi,
I have to design a File to IDoc Sceanrio in PI. From the file, i llpick up the vendor(during mapping) thorough RFC look up. If the more than one vendor comes for the particular condition then I should throw an error log(in the form of file) and no idoc should get posted. If one comes, then idoc should get posted. they do not need BPM.Is there any way to do without BPM?
Points will be awarded for sure.
Regards
Manikandan

No there isn't another way.

File to Idoc and Jdbc

Hi Guys,
Can I implement a scenario wherein the data is sent to Idoc and JDBC parallelly without using BPM?
Regards,
Ashish

Ashish,
><i>If i add multiple recievers in receiver determination step without any condition, then how do i add multiple interface determinations in the area below?</i>
Once you add multiple Receivers and save the same, the Receivers will be available in the Window Below and you would need to create an Interface Determination for each of these Receivers.
As you do not have any condition, no need to add conditions.
><i>created seperate Receiver determinations</i>
You would need only ONE RECEIVER DETERMINATION and this receiver determination would in turn have multiple Interface Determinations.
Like mentioned, add multiple receivers save the Receiver Determination and in the window below, you will nopw be able to add an Interface determination for each of the receiver.
Regards,
Bhavesh

Steps for File to IDOC and IDOC to file Scenario

Settings to be done at R/3 like SM59,WE21,WE20
Setting to be done at XI
Can pls somebody send good blog for it.
Regards
Raj

SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
Cheers..
Vonkolu

My scenario is file to Idoc and we are using multiple receivers.

Whenever we executes the scenario, getting the error u201CATTRIBUTE_IDOC_METADATA u201Cin sxmb_moni
Any suggestions on how to do solve this?

Hi,
>>>>Error: Copy Receiver from Payload: Receiver Is Missing in Payload
Have you checked "Apply control records from payload " in IDOc receiver communication channel?? If so please make sure that you've mapped RCVPRN accordingly in control record of IDOC.
Refer below discussions
Error in SXMB_MONI as"Copy Sender from Payload: Sender Is Missing in Payloa
IDOC Error - Copy Sender from Payload: Sender Is Missing in Payload
Regards,
Priyanka

Idoc and order mapping

Hi,
How to find the relationship between the order and idoc in crm.
I have a sceneraio like if i give the idoc number it has to display the corresponding order number. Where can i find the link between this..
link between crm order and idoc.
Regards
Srinu
Message was edited by:
sreenivasulareddy eragamreddy

Hi,
IDOC for sales order is ORDERS05. Segment E1EDKA1, for field go to SE11 and enter E1EDKA1 to find field for sales order.
Cheers.
...Reward if useful.

ATTRIBUTE_IDOC_METADEATA Error: File to IDOC Java Mapping

I have done a Java Mapping from File to Idoc and I get the following error in sxmb_moni:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>I::000</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Fehler: I::000</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The Idoc structure that I generate in my mapping makes no fullfil of the IDOC tags.
For example:
<IDOC BEGIN="1">
               <EDI_DC40 SEGMENT="1">
                    <TABNAM/>
                    <MANDT/>
                    <DOCNUM/>
                    <DOCREL/>
                    <STATUS/>
                    <DIRECT/>
                    <OUTMOD/>
                    <EXPRSS/>
                    <TEST/>
                    <IDCOTYP/>
                    <CIMTYP/>
                    <MESTYP/>
                    <MESCOD/>
                    <MESFCT/>
                    <STD/>
                    <STDVRS/>
                    <STDMES/>
                    <SNDPOR/>
                    <SNDPRT/>
                    <SNDPFC/>
                    <SNDPRN/>
                    <SNDSAD/>
                    <SNDLAD/>
                    <RCVPOR/>
                    <RCVPRT/>
                    <RCVPFC/>
                    <RCVPRN/>
                    <RCVSAD/>
                    <RCVLAD/>
                    <CREDAT/>
                    <CRETIM/>
                    <REFINT/>
                    <REFGRP/>
                    <REFMES/>
                    <ARCKEY/>
                    <SERIAL/>
               </EDI_DC40>
Should I complete these values in my mapping program?
Which values should I complete?
Thank You.

Antonio,
you can ignore whole EDIDC Segement make disabled in our mapping still it works . but the problem is not with this is our meta data chekc in IDX2 t/c code of XI box.
      it has some problem the strcuture you generate and R/3 accepts are not same their is mismatch in structure
Regards
Sreeram.G.Reddy
Message was edited by:
        Sreeram Reddy

Multi mapping.. is it possible File to Idoc & FIle .. its urgent?????

Hi All,
File to Idoc & File.
I need to pick the file and i need to do multi mapping, so that from the file we can generate
one idoc which has to go to SAP and
one acknowledgment's file and sent back to partner.
Based on the below blog, looks like we can't use Idoc adapter when the target message is Idoc using Multi mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Can anyone suggest me how i can achieve this scenario without using BPM.??
Regards
Seema.

Hi,
The Multi mapping is possible without BPM but not for IDOC as its not part of Java Stack. IDOC adapter is on ABAP stack.
As Raj have suggested,
You could create two different Mappings one for file to IDOC and another for file to file as an acknowledgment.
In Receiver determination you need to use multiple receivers as IDOC --R/3 receiver and the File receiver system.
It will create the IDOC as well as push the acknowledgment to file also.
But incase if you get any problem with sending the IDOC then also you will get successful acknowledgment via file. So directly there will not be any relation between these IDOC and File receivers as an delivery recipt of IDOC.
Here either you have to use the IDOC acknowledgment feature or BPM or Alert notification to get the exact notification about the IDOC posting to receiver system.
Please refer below links
1. IDOC acknowledgment
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
How to Handle Acknowledgments for IDoc (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
IDOC acknowledgements
2. BPM
File to IDOC with BPM
File to idoc with BPM
Problem in BPM implementation
Use Aleaud in BPM
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
3. Alert Notification
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
Thanks
Swarup

Problem with Sender Agreement for EDI File to Idoc scenario

I'm configuring PI for EDI with Seeburger Adapter (Calling as a Module) and I'm having an issue with the Sender Agreement using File Adapter.
Process used is File to IDOC. EDI data will be picked up from VAN (Using existing FTP process rather than using Seeburger FTP) and stored in a folder which is being accessed by PI to send to R/3 to create orders.
All my inbound EDI will be stored in same folder which should be picked up by XI and distribute the same depending upon the respective scenario's in ID and respective mapping/config in IR.
The whole process IR & ID works fine and also creates Idoc in R/3, if I configure for one customer for EDI 850, but when I try to configure for second customer for same EDI 850 having same ANSIX12 version (V4010) as previous customer, I get stuck at the Sender Agreement part for this second customer because I use the same CC for File read for both the customers (Scenarios) and since there is a limitation with File Adapter "sender channel must not be assigned to more than one sender agreement ".
How can I create the Sender Agreement using the same CC for my other scenario?
I tried creating multiple CC for different scenario but when I place a test file for customer A, I see that its being picked up by both CC's.
Pl Advise.
Thanks!
PSR

You need to configure splitter as module in sender file adapter (classifier->bic->splitter) as well as define a message splitter(with partner number and Seeburger mapping) in Seeburger workbench.
Thank you for the reply Aamir,
Do you have any document which can guide me through the process?
Does Seeburger Workbench play any role here? because I'm not using See FTP adapter to connect to my VAN. We get the data from the VAN using FTP process but not using See FTP. I'm using BIC to generate an XSD and SDA file, rest everything is in XI using File to idoc and IDOC to file process.
Thx
PSR

How to convert XML into idocs and post in ECC using PI

Hello All,
I want to configure the scenario like this MDM->PI->ECC. Using FTP I am getting able to fetch the xml file from MDM Server Ready folder. Now, I need to convert this XML file into Idocs and post it in ECC. Can anyone provide me step by step configuration in PI to achieve this. I have configured communication channel with adapter type Idoc in Itegration Builder. But, I am not sure where it will do the conversion of XML into Idoc and how do post it to ECC. I am working first time on PI 7.1. I have worked on XI 3.0 in 2006-2007. Any help to configure this step by step shall be appreciated.
Thanks & Regards,
Hemal

In you have the XML from MDM you have to use the mapping provided by the funtionals in the Funtional specification documents. once you did it you must configure the Receiver IDoc Adapter. and later dont fonget to configure properly the ReceiverAgreement.
as you receive the docuement from MDM via FTP, thats not a SAP System that means that you have to define PI as the sender of the IDoc,otherwise you will have the Error "Unable to convert the sender service to an ALE logical system"
to do that in the receiver Agreement>Header Mapping>Sender System-->Select PI server.
Take in mind to send IDocs to any SAP System, the system that send it must be a SAP system too. thats why you configure it
http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/frameset.htm
Another thing is you have configure the ALE distribution Model.
se this:
http://wiki.sdn.sap.com/wiki/display/XI/FileToIDOC
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Let us know
Rodrigo P-.

IDoc flat file to IDoc

I am receiving flat file in SFTP Server which need to be posted into SAP (No mapping involved)
What will be the best approach ?
1. I tried using IDOCFlatToXmlConvertor (The limitation in the format of source file. The parent and child node relationship should be explicitly mentioned in IDoc flat file which legacy system is not able to do) - Any workarounds ?
2. I moved the Idoc flat file into SAP application server. Now need to schedule job using program RSEINB00
3. File Content Conversion
Any other better solution ? Appreciate your help.
Thanks and regards,
Jose Augastine

For converting Idoc Flat file to idoc xml, ABAP mapping is one of the feasible option.

File to idoc and no mapping?

Similar Messages

Maybe you are looking for