File to idoc mapping error

Hi,
I am mapping a flat file to idoc in xi. If I execute the test data it works fine. But in actual run, it gave me the following mapping error:
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_MT_APPayment_to_FIDCCP02_: Runt
imeException in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
Is it due to some mapping error or some basis config issue?
Thanks,
Jassi

Hi Jassi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
Check the following link:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Amaresh

Similar Messages

File to IDOC scenario : Error with mapping due to Context handling

Hi Experts.
I have a file to IDOC scenario which need your advice.
Source File structure as follows:
Control_Header     <1:1>
Invoice_Header     <1:unbounded)
Invoice_Line          <1:unbounded)
Trailer                    <1:1>
Payload as follows capture from SXMB_MONI
- <Control_Header>
        <Key>999</Key>
        <TransactionID>RCTV</TransactionID>
</Control_Header>
- <Invoice_Header>
    <Key>000</Key>
    <BusinessUnit>HDB05</BusinessUnit>
    <InvoiceNo>64471</InvoiceNo>
</Invoice_Header>
- <Invoice_Line>
      <Key>001</Key>
      <UnitPrice>7.00000</UnitPrice>
      <Quantity>1.0000</Quantity>
      <GSTAmount>0.49</GSTAmount>
      <GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Invoice_Line>
      <Key>001</Key>
      <UnitPrice>8.00000</UnitPrice>
      <Quantity>1.0000</Quantity>
      <GSTAmount>0.56</GSTAmount>
      <GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Invoice_Header>
      <Key>000</Key>
     <BusinessUnit>HDB21</BusinessUnit>
     <InvoiceNo>6Y0575</InvoiceNo>
</Invoice_Header>
- <Invoice_Line>
    <Key>001</Key>
    <UnitPrice>49.50000</UnitPrice>
    <Quantity>1.0000</Quantity>
    <GSTAmount>3.47</GSTAmount>
    <GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Trailer>
     <Key>TRL</Key>
     <TransactionID>RCTV</TransactionID>
     <TotalFeedLine>96</TotalFeedLine>
     <HashTotalValue>212.00</HashTotalValue>
</Trailer>
</ns:MT_EINVOICE>
Mapping as follow:
                                               IDOC
<Control_Header>   ->    <Control_Header>
<Invoice_Header>   --> <Header_Invoice>
<Invoice_Line>      --->        removeContext --> <Line_Invoice>       this is the child node of <Header_Invoice>
<Trailer>               -
>    <Trailer>
The result of the using the above Payload get the following result which not wht I seek
<Control_Header>
<Header_Invoice>
      <Line_Invoice>
      <Line_Invoice>
     <Line_Invoice>   *** This belong to the Invoice_Line of the second <Header_Invoice> at the payload
<Header_Invoice>
     <Line_Invoice>   *** THis segment is empty
<Trailer>
I required the Line_Invoice to belong to the child of the second <Header_Invoice>, I have tried using
removecontext with splitVaue and collaspeContext but to no avail.
May I know what is my mistake on the mapping of the Invoice_Line to Line_Invoice>
Rgds
FNG

Hello,
There should be something that could correlate the Invoice_Header/Key and Invoice_Line/Key. In your example, both are the same for the first and data set. If the sample looks like the one below, it is possible to sort things by correlating the Invoice_Header key and Invoice_Line key
<Invoice_Header>
<Key>000<Key>
</Invoice_Header>
<Invoice_Line>
<Key>000<Key>
</Invoice_Line>
<Invoice_Line>
<Key>000<Key>
</Invoice_Line>
<Invoice_Header>
<Key>001<Key>
</Invoice_Header>
<Invoice_Line>
<Key>001<Key>
</Invoice_Line>
An example mapping could look like this
For Header
Invoice_Header --> Header_Invoice
For Line
/InvoiceLine/Key --> removeContext --> splitByValue:valueChanged --> Invoice_Line
The subfields of the invoice line would also follow a similar logic, you just need to use formatByExample --> splitByValue:eachValue so that the context levels are the same.
Hope this helps,
Mark

File to idoc ..error in sxmb_moni

Hi Xi Friends...
In my xml to idoc scenario...
file is picking..but in sxmb_moni it is showing as mapping error like
<b>No messages created from split mapping</b> ..
i copied the the payload from sxmb_moni and i tested in static message mapping..its converting successfully...
please guide me..
regards
ram

refer these links;
Split mapping created no messages - this has a solution, check if it can help you.
Message Split without BPM - Error

File to Idoc Mapping Problem

Hi all,
i'm getting an error from SXMB_MONI in a scenario File to Idoc.
I have done the mapping from source file and Idoc CREMAS03, when i try to test from Integration Repository it's all ok, but when the scenario is executed i find this error in Idoc Adapter :
<SAP:P1>MSGGUID EF7E2140A08811DDBE1202004C4F4F50: Tag #TEXT found instead of tag IDOC BEGIN=</SAP:P1>
The field BEGIN in idoc structure is filled with constant value 1, than i dont understand the error.
This is the xml source file :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Vendor xmlns:ns0="urn:tbit40:workshop:group01:legacy">
- <Address>
<Country>IT</Country>
<Zip>001</Zip>
<City>ROMA</City>
<Street>SATTA</Street>
</Address>
<Currency>USD</Currency>
<SearchTerm>TEST</SearchTerm>
<LastName>GUIDA</LastName>
<VendorNumber>44332</VendorNumber>
</ns0:Vendor>
Any help is really appreciated.
Thanks.

Hi all and thanks for your answer.
My problem is that for what i can see all Idoc attribute (like the attribute BEGIN) are mapped with constant value.
In taget source i can see : BEGIN = Constant([value=1])
What i dont understand is why when i execute the scenario it ends with this message :
<SAP:P1>MSGGUID EF7E2140A08811DDBE1202004C4F4F50: Tag #TEXT found instead of tag IDOC BEGIN=</SAP:P1>
It seem to me that the tag BEGIN is not filled with value, i also tried to copy the source xml file directly from SXMB_MONI (from payload) and test it in Integration Repository mapping section, but here is all ok and the test end succesfully.

File to IDOC scenario error...

Hi all,
we hhave created an File to Idoc scenario .
we are getting the following error in SXMB_MONI t-code.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BUS_SENDER</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service BUS_SENDER to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
can any one plz say wat this error might be..
TIA
Regards,
Raj

Hi,
The problem occurs when sender and receiver business system or business service does not have a logical system name.
ID - Integration Directory
Posting the IDOC'S into SAP R/3 System, sender and receiver business system or business service requires the logical system name. If the business system (Web As ABAP) does not have the logical system name, then add the logical system for business system.
If business system type = Web AS ABAP, then add the Logical system in Technical System level and Save.
If business system type = Third-Party, then add the logical system in business system level and Save.
If the business service does not have the logical system name in ID, it needs to be configured as follows.
Go to ID and click the Business service -> Services -> Adapter Specific Identifiers. Enter the logical system name and Save.
Apply and activate.
hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

File to Idoc - Outbound Error

Hi,
I am doing File to IDOC scenario. I got error
in "Message has error status at outbound status" .. When
I opend that messeage then i got this ...
<SAP:IDOCTYP>ZIDOCIN</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>ZMTIDOCIN</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPX11</SAP:SNDPOR>
<SAP:SNDPRN>Logi_01</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPA11</SAP:RCVPOR>
<SAP:RCVPRN>A11CLNT200</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
Can any one tell me what to do to solve this.
thx,
Ansar.

Hi,
There is somethig worng with your Partner Function while defining the the Partner Profile, please check it. The Partner function is optionla and see if you need it
Go thru the link,
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Thanks,
Prakash
Thanks,
Prakash

File to Idoc with error in trfc

Hello,
I have a scenario like
File -> XI -> (idoc) R3
The scenario works fine but yesterday I had a problem with the user in the rfc destination(pwd wrong) which is used for the idoc-adapter. In the sxmb_Moni and the RWB the msg. got an success flag/info but it was not delivered to the r3 because the rfc-destintion could not work.
I know that the idoc-adapter is not part of the adapter-engine and my understanding was that the adapter send his status back to the integration engine. But in this cause I got no feedback from the adapter. I think this is not Ok or I am wrong ?
Regards Jami

Hi Jami,
The reason is simple.....the message is sent from the integration server to the adapter engine which was susessful.but what went wrong is the rfc destination being wrong in the receiver adapter which is not known to the integration server. So in simple words, if things work fine in your integration server then it will not throw an error in your sxmb_moni. So had there been a problem between the message transfer from the integration engine to the adapter engine then it would have surely given you an error in your sxmb_moni(for example you specify some wrong parameters while configuring your receiver IDOC adapter).
But in this case since we dont have an IDOC adapter in the component monitoring (it has adapters which are in the JAVA stack only but IDOC adapter is in the ABAP stack)we can see the error in SM58 only.
I hope this answers your question fully. If any other doubts regarding the same pls do ask me.
Regards,
Abhy
Message was edited by: Abhy Thomas

File to idoc - IDX5 Error

Hi,
I am doing file to idoc scenario. I have done all required configuration in IR and ID. This Scenario is now executing properly and in SXMB_Moni it is also showing new generated IDOC number.
But when I tried to locate same IDOC in R/3 system i am not able to locate it. In IDX5 tcode is showing error msg like "No authorization to send IDocs with message type ZTESTMSG".
Please guide me on this.
Thanks,
Sunil

Hi Sunil,
Please can you check the RFC in IDX1 (RFC destination given in PORT)which is used for sending the IDOC.
Does it have all the authorizations.
Also you can try this using xiappluser in the RFC destination.
Regards
Vijaya

XI Flat File to JDBC Mapping Error

Hi,
I have been trying to insert some records from a flat file into a sybase database using the FILE adapter (with file content conversion) as a sender and the JDBC adapter as a reciever, but I keep getting mapping errors like:
RuntimeException during appliction Java mapping com/sap/xi/tf/_mm_hh_file__hh_sybase_nombres_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:mt_hh_sybase_nombres/STATEMENTNAME. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start
I have read through some blogs and I still can't figure out what is wrong.
Flat pipe separated file:
Hans|Robert|Hahn|Gallegos
Karina|Maria|Cordoba|Gutierrez
Datatype for this file looks like this:
   Record                         1
      Row                          1...Unbounded
         Nombre                  1
         SegundoNombre     1
         ApPaterno              1
         ApMaterno             1
Because the FILE adapter uses Content conversion, the file translates to:
<?xml version="1.0" encoding="utf-8" ?>
<ns:hh_test xmlns:ns="http://me.com">
<Record>
     <Row>
      <Nombre>Hans</Nombre>
        <SegundoNombre>Robert</SegundoNombre>
        <ApPaterno>Hahn</ApPaterno>
        <ApMaterno>Gallegos</ApMaterno>
     </Row>
     <Row>
       <Nombre>Karina</Nombre>
       <SegundoNombre>Maria</SegundoNombre>
       <ApPaterno>Cordoba</ApPaterno>
       <ApMaterno>Gutierrez</ApMaterno>
     </Row>
    </Record>
</ns:hh_test>
My database table looks like this:
Nombres
ApPaterno
ApMaterno
Datatype for this table looks like this:
STATEMENTNAME    1..Unbounded
nombres                  1
    action                    optional
    TABLE                  1
    access                  1
      Nombres             1
      ApPaterno           1
      ApMaterno           1
MAPPINGS as follows:
Record ------> no mapping
Row ------> STATEMENTNAME
Constant ------> action
Constant ------> TABLE
Nombre + SegundoNombre ------> Nombres
ApPaterno ----> ApPaterno
ApMaterno ----> ApMaterno
How do I do the mapping ? I've been through a lot of blogs and threads but I haven't found an example like this, a flat pipe separeted multiline file with records to be inserted in a database.
Message was edited by:
        Hans Hahn

Hans,
The error shows you have an error in mapping. Also you have mapped constant for ACTION and TABLE. Here you have to hardcode the value INSERT or UPDATE etc for ACTION and the name of the table for TABLE.
Check this weblog where he has mentioned everything what you are looking for:
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Also once when you are done with mapping try to execute it in the test tab of mapping editor.
---Satish

File to idoc mapping

Hi all
I dont know much about idocs. I am creating a file to idoc scenario. i have done with(hope so) all the other settings, design and configuration. BUt dont know how to do the mapping.how the control segment fields have to be mapped. what are the mandatory fields in idoc?

Hi Aarthi,
You can leave the control records of the Idoc blank since XI fills them up. This is because XI would be the sender for the idoc. If you select "Header mapping" then you have to map control records else not.
Also in the idoc data segments all fields with a red dot are mandatory. If you do not have a field from the file to map with the mandatory idoc field then either you can suppress it or map it to a constant.
Hope this helps.
Regards.

FILE TO IDOC MAPPING Query

Hi Experts
I have facing some confusion when i am doing mapping for my scenario FILE to IDOC.
The IDOC Structure is as follows
HeaderRecord 0-1
DataRecord1   0-unbounded
     (Subnode)DataRecord2 0-unbounded
      (Subnode)DataRecord4   0-unbounded
DataRecord5 0-unbounded
      (subnode) DataRecord6 0-unbounded
TrailerRecord 0-1
when the DataRecord1 is executed, an idoc is generated and all the DataRecord2,DataRecord4,DataRecord6 shld come under that particular Idoc. And when another Idoc is generated,all the DataRecord2,DataRecord5,DataRecord6 shld come under that particular Idoc.
How to achieve mapping for this??
please help me out.
Edited by: vemuganti naga phalguna on Oct 27, 2010 7:56 AM
Edited by: vemuganti naga phalguna on Oct 27, 2010 7:59 AM

Hi
1) Source file is Text File.
sample source data.
A|20101006142345|SAPQMP|40|
B|5999|R00003D||N|20072008|Unknown|
C|T0014|M1556||colourless Pale yellow||Receipt-Bulk|1|Yes|Y|Text||
C|T0001|M1556||Limpid liquid ||Receipt-Bulk|1|Yes|Y|Text||
C|T1379|M1398|18||23|Receipt-Bulk|1|Yes|Y|Number|mm²/s|
B|5998|R00014A||N|20072008|Unknown|
C|T0014|M0211||2.0||CoA|1|No|Y|Text||
C|T0014|M0211||2.0||Receipt-Bulk|1|No|Y|Text||
C|T0014|M0211||2.0||Transfer|1|No|Y|Text||
C|T0051|M0271|97|||CoA|1|No|Y|Number|None|
C|T0073|M1356|Pass|||Receipt-Bulk|1|No|Y|||
C|T0073|M1356|Pass|||Transfer|1|No|Y|||
C|T0025|M0331||0.880||CoA|1|No|Y||g/ml|
C|T0025|M0331||0.880||Receipt-Bulk|1|No|Y||g/ml|
C|T0025|M0331||0.880||Transfer|1|No|Y||g/ml|
C|T0001|M1556||Clear & Bright ||CoA|1|No|Y|Text||
C|T0049|M0341|28.0||32.0|CoA|1|No|Y|Number|mm²/s|
C|T0049|M0341|28.0||32.0|Receipt-Bulk|1|No|Y|Number|mm²/s|
C|T0049|M0341|28.0||32.0|Transfer|1|No|Y|Number|mm²/s|
C|T0042|M0422|||-15|CoA|1|No|Y||°C|
C|T0092|M0578|||16|CoA|1|No|Y|Number|% Loss|
C|T0021|M0199||||CoA|1|No|Y||minutes|
C|T0039|M1453|Mktble|||CoA|1|No|Y|||
C|T0050|M0341||5.1||CoA|1|No|Y|Number|mm²/s|
C|T0050|M0341||5.1||Receipt-Bulk|1|No|Y|Number|mm²/s|
C|T0050|M0341||5.1||Transfer|1|No|Y|Number|mm²/s|
C|T0026|M0412|210|||CoA|1|No|Y|Number|°C|
Z|20101006142355|SAPQMP|40|
where Records A indicate File Header, Z indicates File Trailer
Recodrs B indicateds Material header and Would be repeating multiple times
No. of B Records = No. of Idocs generated with corresponding C records data which indicates Component Rows (multiple)
i.e as many B records file contains, that many Idoc will be created
For Mapping I require B and C Records. Field Separator is Pipe | symbol
I need to Ignore A B C Z
How to define the source structure and the respective FCC Parameters
please help me out

File to IDOC mapping - Message Type WMMBXY

Hi
   I am working on FILE to IDOC Scenario. I have records like the following in my file:
301 ABC455559 03.11.2009 02u0391B13 01     OBAF515150 G378378 15 PC   20090311 MIGO
301 ABC455560 03.11.2009 02u0391B13 01     OBMN515040 437482 50 PC   20090311 MIGO
Using an ABAP Program I added DTL in front of every record as I have to convert text file to XML mapping.
DTL 301 ABC455559 03.11.2009 02u0391B13 01     OBAF515150 G378378 15 PC   20090311 MIGO
DTL 301 ABC455560 03.11.2009 02u0391B13 01     OBMN515040 437482 50 PC   20090311 MIGO
When I did this my mapping is fine from source side. For the above two records there are two records created in xml format. But only one record is created at target side. I changed message type WMMBXY to unbounded in the external message but still only one idoc is created.
Please let me know if anyone faced the same issue.
Thanks
Naga

1..Please mapping ur sorce node (has occurance 0..unbound) with target node.
2...change occurance in message tag in mapping for IDOC message
3...change occurance in message mapping for IDOC message
Regards,
Manisha

Flat File to IDOC Mapping requirement to generate Multiple Segments

Hi Experts,
I got a requirement were i have 2 records in a file and i need to generate 2 IDOCs with multiple segments in it.
FILE :
10/01/2010     101 KRNA     ic_quantity          30-0257     3526     1     1     ea     110000     10
10/01/2010     101     KRNA     ic_quantity          90-0005     3526     1     2     ea     110000     10
Idoc should generate 2 IDOCs with multiple segments as shown below
I have imported the IDOC and changed the occurrence to " unbounded "
The Basic IDOC Type : WMMBID02
I need to generate Multiple segments of E1MBXY1
i.e.., First IDOC should contain two E1MBXY1 segments
         Second IDOC should contain Four E1MBXY1 segments
IDOC1 :   WMMBID02
Segment :   E1MBXY1( 2 segments)
10/01/2010     101     KRNA     ic_quantity          30-0257     3526     1     1     ea     110000     10
10/01/2010     101     KRNA     ic_quantity          90-0005     3526     1     2     ea     110000     10
IDOC2 : WMMBID02
Segment : E1MBXY1 ( 4 segments)
10/01/2010     101     KRNA     ic_quantity          30-0257     3526     1     1     ea     110000     10
10/01/2010     101     KRNA     ic_quantity          30-0257     3521     1     1     ea     110000     10
10/01/2010     101     KRNA     ic_quantity          90-0005     3526     1     2     ea     110000     10
10/01/2010     101     KRNA      ic_quantity          90-0005     3521     1     2     ea     110000     10
Can anyone suggest me how to generate IDOCs with multiple segments
what are multiple ways of generating it
Whether it can be achieved using Multi-mapping or I need go for UDF
If any one has done has done this type of requirement ,please share the points.
Thanks
Sai

Basically you need to generate idoc per record in the flat file. During fcc conversion you convert flat file to xml structure at the sender side. In the mapping use xml file structure source and idoc as receiver structure. You just export idoc and update the idoc segment 1 to unbounded. Please follow the michael blog for file to idoc multimapping without bpm. Yes without bpm it is possible.
see this link... This will answer your requirement.
https://wiki.sdn.sap.com/wiki/display/XI/File%20to%20Multiple%20IDOC%20Splitting%20without%20BPM
>Whether it can be achieved using Multi-mapping or I need go for UDF
you dont need udf for this.

Query on Context Handling ( File to IDOC mapping )

Hi All,
I've a scenario from file to IDOC. The structure of file is as follows.
Struct ( occurs unbounded times )
|
- Name
Str. of IDOC
Node
|
- name1
- name2
- name3
- name4
The problem is that the name in file can occur many times.
So if say name occurs 2 times in the file then it has to be mapped to name1 and name2 in IDOC.
If Name in file occurs 3 times it'll be mapped to name1, name2 and name3 in IDOC.
Am looking for some help.
Thanks,
Joe.

Hi Joe,
For every name in the file, you will have to map the value to the name field in the IDoc. Use SplitByValue node function available in the graphical editor. You will be able to achieve this mapping. For more about the usage, here's the documenation and a blog(where an example has been given):-
http://help.sap.com/saphelp_nw04/helpdata/en/21/3bb8c495125e4eb5969f0377885fe0/frameset.htm
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Regards,
Sushumna

Issue in segment creation for File to IDOC mapping

Hi,
I have file with many feilds, i need to create a segment in IDOC for unique combination of 2 feilds.
eg:
408
430050
segment
208
430050
segment
208
430050
208
460100
segment
208
452010
segment
408
432000
segment
208
432000
segment
the value for the combination of first column and 2nd column are equal it should trigger one segment instead of 2segments else(for different combination) trigger the segment
eg from table:
in table for 208,430050 is occuring twice but it should trigger only one segment(unique combinations of 2 columns), for all other combinations it should trigger one segment for each.

Hi Swapna,
You can use below mapping.
UDF:
Execution type : All Values Of Context
public void removeDuplicates(String[] context, ResultList result, Container container) throws StreamTransformationException{
HashSet<String> hashSet = new HashSet<String>();
        for (int i = 0; i < context.length; i++) {
            if (hashSet.add(context[i]))
               result.addValue(context[i]);
            else {
               result.addSuppress();
Reards,
Praveen.

File to idoc mapping error

Similar Messages

Maybe you are looking for