File to IDOC Scenario Not able get Metadata (IDX2)

Hi,
I am doing File to IDOC scenario. I have done all configurations in IR and in ID. But it is throwing error like ATTRIBUTE_IDOC_METADATA-Basic type ZOIDOC does not exist.
Where as my custom idoc is a not exit in metadata (IDX2). Also I am trying to reload same manually but I am not able to reload it. I have all required configuration in SAP R/3 side like partner profile.
I would appreciate yours inputs.

Hi Sunil,
You are saying that you are unable to load the Metadata even manually.
There could be a problem with the RFC destination defined within the IDX1 port. So first test the RFC destination using SM59.
Also ensure that you have used the right naming conventions for the PORTS and RFC destinations as below:
<SID>CL<ClientNo> e.g DXXCL055 where DXX is the SID and 055 is the Client No.
Rgds
RC

Similar Messages

File to IDOC scenario not working

I have configured a file to idoc scenario and kept the XMl file in a shared location on XI server.
I have also created and checked the communication channels correctly.
Once Everything is done my xml file does not get picked up at all. Also the SXMB_MONI does not show any messages for my service.
How do I find out what is the error ??

Hi Kapil,
Just check the File path that was in shared location once and the file name is properly mentioned or not..
And also one thing after activating all IR and ID just goto SXI_CACHE and press F6 to update cache refresh
And also in RWB --> Message Monitoring --> Adapter monitoring --> check the status of the sender
Regards,
Sridhar

Error in File-PI-Idoc scenario

Dear All,
While working on File-PI-Idoc scenario, I am getting the error as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">UNAUTHORIZED</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have checked various other posts on the same error but still I am not able to resolve this.
Please help me in resolving this error.
reg,
nj

Nishu,
Please check whether you have assigned the following roles to the particular user you are using for data communication.
Roles:
SAP_XI_IS_SERV_USER,
SAP_XI_APPL_SERV_USER
Regards,
Sugata

File to IDOC scenario error...

Hi all,
we hhave created an File to Idoc scenario .
we are getting the following error in SXMB_MONI t-code.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BUS_SENDER</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service BUS_SENDER to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
can any one plz say wat this error might be..
TIA
Regards,
Raj

Hi,
The problem occurs when sender and receiver business system or business service does not have a logical system name.
ID - Integration Directory
Posting the IDOC'S into SAP R/3 System, sender and receiver business system or business service requires the logical system name. If the business system (Web As ABAP) does not have the logical system name, then add the logical system for business system.
If business system type = Web AS ABAP, then add the Logical system in Technical System level and Save.
If business system type = Third-Party, then add the logical system in business system level and Save.
If the business service does not have the logical system name in ID, it needs to be configured as follows.
Go to ID and click the Business service -> Services -> Adapter Specific Identifiers. Enter the logical system name and Save.
Apply and activate.
hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

Reg File to IDOC scenario with Acknowledgment

Hi Experts!
In a File to IDOC scenario , how to get the acknowledgment back to PI after posting the IDOC to SAP system and send the acknowledgment to the sender system.
What setting needs to be done in Sap and PI? Is it better if we have a BPM or is it good to have another interface to pass the acknowledgment IDOC back to the file sender.
Regards,
Srini

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

File to idoc scenario problem

I am trying to do FILE TO IDOC scenario, i am getting error called, UNABLE TO CONVERT SENDER SERVICE TO AN ALE LOGICAL SYSTEM.?
could anybody solve this problem?

Murali,
You get this error when Adapter specific attributes are missing..
Maintain Adapter Specific Attributes for business system in Integration directory.
Select your business system...Then select Service-->Adpater Specific identifiers.
from right hand window..
Set Logical System ID(of R/3 system), R/3System ID and client.
Let us know if you need more details.
Nilesh

File to IDoc scenario-CREMAS not getting posted

Hi Experts,
i am doing a file to idoc scenario in which i am giving the xml file from MDM ,consisting of Vendor Master data and posting the address and the general data into the ADRMAS and CREMAS idocs into the R/3 system.
The problem that i am facing is that the ARMAS is getting posted correctly but the CREMAS is getting posted with the red signal,status 51.It says "Not authorized to change the Vendor Centrally."
Can anyone please tell me what is the reason and the solution for this problem?
Is this a data error or XI error?
Thanks in advance,
Shweta.

Hi Shweta
Status 51, 52 means Posting error
Please check wheteher all the configuration has been done or not
SM59-rfc destination
IDX1-port
IDX2-load metadata
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
After That check the solution it is due to Authorization
File to idoc - IDX5 Error
Regards
Abhishek Mahajan
*Please reward points if helpful**

IDocs not created in file to IDoc scenario

Hi all
I am trying this file to IDoc scenario.
File picked up successfully and sent to R/3 BackendBut Idoc is not postedthe status records
In /n we05 in R/3 Backend shows that EDI: Partner profile inbound not available
I created/tested all basics like RFC dest, port etc.
File service that I am using is a business service hence I am specifying a Logical system name in
Adapter specific Identifiers of the file service.
I disabled EDI_DC40 control tag record as IDoc adapter
takes care of it.
So at first I tried the configuration of IDoc comm. Channel by checking the Apply control record values from payload
But SXMB monitor gave an error regarding this control record tagI guess as we have disabled it so there wont be any values
for control record in payload (correct me if I am wrong).
So I unchecked the checkbox Apply control record values from payload and monitor showed up as successfully processed.
But in the backend I am getting this error regarding partner profile.
I also tried to use an existing profile (LS type) by modifying its inbound parameters to accept CREMAS Idoc.
But the error is as persistent as me
Pls help
Sudhir

Hi
Sender --> LEGACY, maintained in SLD (Logical system).
Receiver--> ENI maintained in SLD with logical sys name M700.
Partner Profile LEGACY maintained in R3.
Following is the IDocOutbound in SXMB monitor in XI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>100</SAP:MANDT>
<SAP:DOCREL>640</SAP:DOCREL>
<SAP:DOCNUM>0000000000001013</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>CREMAS03</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>CREMAS</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPAXI</SAP:SNDPOR>
<SAP:SNDPRN>LEGACY</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPENI</SAP:RCVPOR>
<SAP:RCVPRN>M700</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL />
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS />
<SAP:OUTMOD />
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>0000-00-00</SAP:CREDAT>
<SAP:CRETIM>00:00:00</SAP:CRETIM>
<SAP:ARCKEY>DF57A2C0532811D9AD84000F206A031B</SAP:ARCKEY>
</SAP:IDocOutbound>
Control record of IDoc in R3
Tab: Typeinfo
 Basic type-->CREMAS03
 Message Type-->CREMAS
Tab: Partner
 Recipient
 Port -->SAPENI
 Partner Number--> M700
 Partner Type-->LS
 Sender
 Port -->SAPAXI
 Partner Number--> LEGACY
 Partner Type-->LS
Pls help
Regards
Sudhir

** File to IDoc scenario - IDoc not created in target system

Hi friends,
We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target system. What could be the problem?
We are using DEBMAS message type DEBMAS06 IDoc type. We checked the following.
1) SM59 - Connections are OK both application and XI system
2) IDX1 - In XI System, we have assigned SAP<R/3> port.
3) IDX2 - IDoc is imported.
4) In ID - Sender File - Business Service - Adapter-Specific Identifier - Logical System name is given.
5) In application system. - Partner Profile maintained correctly.
6) SM58 - There is no error.
So, what could be the reason ?
Kindly reply, friends,
Thanking you.
Kind Regards,
Jeg P.

Hi,
Check all the steps ..
File to IDOC
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Thanks,
Satya

Not sure if IDoc was created or received in file to idoc scenario

Hi,
I configured a file to idoc scenario in my test client for idoc MATMAS.MATMAS02 , now after going thru all the phases of design and configuration and creating partner profile using we20 , when I m executing the scenario , I am not sure wht happened to the idoc becz i can't see in the R/3 system using we05/02 or BD87 in the XI system .
Pl help how to rectify the error and find out where the error has actually occured.
ans will be rewrded
rgds
mojib

Hi Mojib,
first check in SXMB_MONI whether you have a success chequered flag for the file messge.................if there is error here, then rectify your this error and re-run your scenario................if you cannnot see your file msg in SXMB_MONI, then go to RWB and in comm channel monitoring, see the error in sender file comm channel status and rectify the error in sender file comm channel in ID and save and activate it and then re-run your scenario............
then execute SM58 to see in there is anything in tRFC.........if there is not anything here, then it means your IDOC has reached R/3.................
then in R/3, execute WE05 for the relevant period, then you will see your IDOC there with some status..........
Regards,
Rajeev Gupta

File to db scenario not getting out put

In file to db scenario not getting output(mysql db). giving error for receiver dat there is no action attribute in xml docment..
what could be da reason??

The XML document must have the following schema in this case:
<root>
<StatementName1>
<dbTableName action=UPDATE | UPDATE_INSERT>
<table>realDbTableName</table>
<access>
<col1>val1</col1>
<col2>val2new</col2>
</access>
<key1>
<col2>val2old</col2>
<col4>val4</col4>
</key1>
<key2>
<col2>val2old2</col2>
</key2>
</dbTableName>
</StatementName1>

How can I get my time machine to allow me to recover files again? After upgrading to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.

How can I get my time machine to allow me to recover files again?
After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
I've searched and can not find a solution to the problem that's being encountered.

Yeap that all makes sense now.
Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
Over wireless are you waiting for the indexing to finish.. ??
Previous backup may not show for a couple of hours.
Long short of it.. Mavericks version of TM is a pain.
Sometimes it is easier to completely ignore the TM backup and do the restore manually.
I have posted the details here. See if this helps.
Can't access old files on time capsule

File to idoc scenario in pi 7.1

Hi All,
I am testing file to Idoc scenario.
I have few queries. I am using PI 7.1
1) in Message mapping - I import the receiver idoc metadata. and doing mapping.
So there are couple of mandatory fields over there. Please let me know how to treat them. Do I need to diable them or put some value. for exp Direct, Segment. SNDPRN RECPRN all these madatory fields are there. Please advice.
2) When I am creating communication component for sender side(File system) then should I assign the logical port and if then what name it can be . Is there any other place we need to maintain this entry. I remember in PI 7.0 I dont need to assign the local name. But here i see I need to do. if I am not putting the name over there then it throw error message "Unable to convert the sender service <Business Compoenetname> to an ALE logical system.
Please advice how to overcome
3) now any how I am able to process the idoc from PI and its coming to ECC system. but it showing failed over there and giving me error message.
"EDI: Partner profile inbound not available"
I checked all the relevent partner prfile configuration is already there"
I have already used all the forums , I did these scenario in past in PI 7.0 and never faced much issue . but doing first in PI 7.1 after a long time, so I might be possible, I am missing some thing. Please advice and help. thank
Ram

Hi Ram,
There is nothing new in PI7.1 which can cause these errors.. it is because the interface is configured wrongly
>>1) in Message mapping - I import the receiver idoc metadata. and doing mapping.So there are couple of mandatory fields over there. Please let me know how to treat them. Do I need to diable them or put some value. for exp Direct, Segment. SNDPRN RECPRN all these madatory fields are there. Please advice.
If you know the value the you can create the control record during mapping and the fields which you don;t required you can map it co constant. It is using this control record the partner profile entries are found and if there is a mismatch then the idoc will fail with the error which you mentioned in point 3
>>2) When I am creating communication component for sender side(File system) then should I assign the logical port and if then what name it can be . Is there any other place we need to maintain this entry. I remember in PI 7.0 I dont need to assign the local name. But here i see I need to do. if I am not putting the name over there then it throw error message "Unable to convert the sender service <Business Compoenetname> to an ALE logical system.
No in 7.1 also we dont have to do anything like that. There is a blog on this error from Michael, please go through it and understand why and how this error occurs. May be in PI7.0 you were lucky enough for not getting this error
>>3) now any how I am able to process the idoc from PI and its coming to ECC system. but it showing failed over there and giving me error message. "EDI: Partner profile inbound not available"I checked all the relevent partner prfile configuration is already there"
Check the control record of the generated idoc and see whether you have a partner profile entry for the parameters mentioned in it. If not then you need to correct them in PI
Regards
Suraj

Trouble shooting File to Idoc scenario: wrong Idoc structure in target

Hi All,
             I am working in an file to idoc scenario. Now the scenario is running but the idoc I am sending from SAP XI is not matching with one received in SAP R/3 system. This is not a new scenario. The scenario was already existing. I have done structural changes in Idoc structure and re-imported it in SAP XI. When the iodoc reaches SAP R/3 system I check its structure and data content. 4 of its fields are missing all 4 were newly added fields. Data from some fields are getting merged into one field within Idoc. data from one field is moving onto other fields in target. I have refreshed the metadata using IDX2 transcation within SAP XI but still getting same result.

Hi All,
I am able to see the changed idoc structure in IR. I have also tried cache refresh. I am trying to explain my problem once again with example.
Source Idoc in XI
      fieldname                            data
       f1                                       d1
       f2                                       d2
       f3                                       d33
       f4                                       d4
       f5                                       d5
Idoc structure received in SAP R/3 system. I am seeing through we02 transcation, inbound idoc
      fieldname                            data
       f1                                       d1
       f2                                       d2
       f4                                       d33d4
I have tried cache refresh, IDx2 metadata refresh, but no improvement of the situation.

File to Idoc Scenario using third party systems

hi,
Working with a File to Idoc Scenario. Been able to successfully define everything in IR / ID. However when I go to BD87 (reciever system) and see the status of Idoc processed - getting the error code 51 "Function Module Not Allowed: <Function Name>" . What could be the reason for this???
Have defined partner profiles in WE20 of type LS and also specified an inbound paramter in the post processing tab for partner profile. Are there any other settings I need to take care of to avoid getting that error.

Hi
I am giving u all the steps whioch are required for
File to IDoc Scenario
SM59- Create RFC destination
IDX1- Create a IDXPORT in idx1
IDX2-3. Import metadata of IDocs in idx2
Bus. service adapter specific Identifiers-->Logical sys name
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
SE16-Table name->LFA1 to check vendor has been created
Check have u followed all the steps.
Regards
Arpit Seth

File to IDOC Scenario Not able get Metadata (IDX2)

Similar Messages

Maybe you are looking for