File to IDOC scenario not working
I have configured a file to idoc scenario and kept the XMl file in a shared location on XI server.
I have also created and checked the communication channels correctly.
Once Everything is done my xml file does not get picked up at all. Also the SXMB_MONI does not show any messages for my service.
How do I find out what is the error ??
Hi Kapil,
Just check the File path that was in shared location once and the file name is properly mentioned or not..
And also one thing after activating all IR and ID just goto SXI_CACHE and press <b>F6</b> to update cache refresh
And also in RWB --> Message Monitoring --> Adapter monitoring --> check the status of the sender
Regards,
Sridhar
Similar Messages
-
File to IDOC Scenario Not able get Metadata (IDX2)
Hi,
I am doing File to IDOC scenario. I have done all configurations in IR and in ID. But it is throwing error like ATTRIBUTE_IDOC_METADATA-Basic type ZOIDOC does not exist.
Where as my custom idoc is a not exit in metadata (IDX2). Also I am trying to reload same manually but I am not able to reload it. I have all required configuration in SAP R/3 side like partner profile.
I would appreciate yours inputs.Hi Sunil,
You are saying that you are unable to load the Metadata even manually.
There could be a problem with the RFC destination defined within the IDX1 port. So first test the RFC destination using SM59.
Also ensure that you have used the right naming conventions for the PORTS and RFC destinations as below:
<SID>CL<ClientNo> e.g DXXCL055 where DXX is the SID and 055 is the Client No.
Rgds
RC -
File to RFC Scenario - Not working with AAE
I have a File to RFC Scenario (calling RFC /POSDW/CREATE_TRANSACTIONS_EXT) using AAE but it is failing with following error in PI .
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
But When I run the same scenario using IE instead of AAE, it is successful from PI. So probably there is nothing wrong in RFC channel configuration.
There's an OSS note-730870 on this error ,it says the XML document sent to RFC Adapter may not be RFC-XML but as I am using AAE, payload generated after technical routing cannot be viewed.
Could you all please suggest why this error is coming and solution for the same?
Thanks,
AnkitHi Debashish,Monica,
Thanks for your help, I checked this SAP note its question 16 do describe my problem but do not provide solution and as I am using AAE it does not allows me to see the target structure generated whereas if I use IE the target structure generated is sucessfully getting posted.
Also, the functional module is present in target system. I have reimported the RFC also.
Is there some AAE related configuration required to enable AAE with RFC which could be missing?
This is what I get in log as the RFC reciever is called..
06.09.2011 14:15:31 Information MP: entering1
06.09.2011 14:15:31 Information MP: processing local module localejbs/RfcAFBean
06.09.2011 14:15:31 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
Thanks,
Ankit -
Dear All,
Yesterday I deleted the entry from SMQR transaction, I have SOAP->RFC->SOAP scenario it is working fine, but SOAP->XI->IDOC scenario is giving me the error , Please let me know how do I solve this issue.
Thanks in advance.
RaghavendraHi Ragava,
are u expecting the IDOC acknowledgments as RFC responds if so try to follow this links it may help you
setting up Audit Response.
Configuration Tips for a Business Service/Integration Process to send back ALE audit IDOC
Just set this parameter in SXMB_ADM >integration engine configuration>specific configuration--> choose RUNTIME --> ACK_SYSTEM_FAILURE.
It will send a acknowledgment in SXMB_MONI
regards,
Kishore -
IDocs not created in file to IDoc scenario
Hi all
I am trying this file to IDoc scenario.
File picked up successfully and sent to R/3 Backend But Idoc is not posted the status records
In /n we05 in R/3 Backend shows that EDI: Partner profile inbound not available
I created/tested all basics like RFC dest, port etc.
File service that I am using is a business service hence I am specifying a Logical system name in
<b>Adapter specific Identifiers</b> of the file service.
I disabled EDI_DC40 control tag record as IDoc adapter
takes care of it.
So at first I tried the configuration of IDoc comm. Channel by checking the Apply control record values from payload
But SXMB monitor gave an error regarding this control record tag I guess as we have disabled it so there wont be any values
for control record in payload (correct me if I am wrong).
So I unchecked the checkbox Apply control record values from payload and monitor showed up as successfully processed.
But in the backend I am getting this error regarding partner profile.
I also tried to use an existing profile (<b>LS</b> type) by modifying its inbound parameters to accept <b>CREMAS</b> Idoc.
But the error is as persistent as me
Pls help
SudhirHi
Sender --> LEGACY, maintained in SLD (Logical system).
Receiver--> ENI maintained in SLD with logical sys name M700.
Partner Profile LEGACY maintained in R3.
<b>Following is the IDocOutbound in SXMB monitor in XI</b>.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Response
-->
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>100</SAP:MANDT>
<SAP:DOCREL>640</SAP:DOCREL>
<SAP:DOCNUM>0000000000001013</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>CREMAS03</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>CREMAS</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPAXI</SAP:SNDPOR>
<SAP:SNDPRN>LEGACY</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPENI</SAP:RCVPOR>
<SAP:RCVPRN>M700</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL />
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS />
<SAP:OUTMOD />
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>0000-00-00</SAP:CREDAT>
<SAP:CRETIM>00:00:00</SAP:CRETIM>
<SAP:ARCKEY>DF57A2C0532811D9AD84000F206A031B</SAP:ARCKEY>
</SAP:IDocOutbound>
<b>Control record of IDoc in R3</b>
Tab: Typeinfo
Basic type-->CREMAS03
Message Type-->CREMAS
Tab: Partner
Recipient
Port -->SAPENI
Partner Number--> M700
Partner Type-->LS
Sender
Port -->SAPAXI
Partner Number--> LEGACY
Partner Type-->LS
Pls help
Regards
Sudhir -
File to IDoc scenario-CREMAS not getting posted
Hi Experts,
i am doing a file to idoc scenario in which i am giving the xml file from MDM ,consisting of Vendor Master data and posting the address and the general data into the ADRMAS and CREMAS idocs into the R/3 system.
The problem that i am facing is that the ARMAS is getting posted correctly but the CREMAS is getting posted with the red signal,status 51.It says "Not authorized to change the Vendor Centrally."
Can anyone please tell me what is the reason and the solution for this problem?
Is this a data error or XI error?
Thanks in advance,
Shweta.Hi Shweta
Status 51, 52 means Posting error
Please check wheteher all the configuration has been done or not
SM59-rfc destination
IDX1-port
IDX2-load metadata
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
After That check the solution it is due to Authorization
File to idoc - IDX5 Error
Regards
Abhishek Mahajan
*Please reward points if helpful** -
** File to IDoc scenario - IDoc not created in target system
Hi friends,
We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target system. What could be the problem?
We are using DEBMAS message type DEBMAS06 IDoc type. We checked the following.
1) SM59 - Connections are OK both application and XI system
2) IDX1 - In XI System, we have assigned SAP<R/3> port.
3) IDX2 - IDoc is imported.
4) In ID - Sender File - Business Service - Adapter-Specific Identifier - Logical System name is given.
5) In application system. - Partner Profile maintained correctly.
6) SM58 - There is no error.
So, what could be the reason ?
Kindly reply, friends,
Thanking you.
Kind Regards,
Jeg P.Hi,
Check all the steps ..
File to IDOC
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Thanks,
Satya -
Not sure if IDoc was created or received in file to idoc scenario
Hi,
I configured a file to idoc scenario in my test client for idoc MATMAS.MATMAS02 , now after going thru all the phases of design and configuration and creating partner profile using we20 , when I m executing the scenario , I am not sure wht happened to the idoc becz i can't see in the R/3 system using we05/02 or BD87 in the XI system .
Pl help how to rectify the error and find out where the error has actually occured.
ans will be rewrded
rgds
mojibHi Mojib,
first check in SXMB_MONI whether you have a success chequered flag for the file messge.................if there is error here, then rectify your this error and re-run your scenario................if you cannnot see your file msg in SXMB_MONI, then go to RWB and in comm channel monitoring, see the error in sender file comm channel status and rectify the error in sender file comm channel in ID and save and activate it and then re-run your scenario............
then execute SM58 to see in there is anything in tRFC.........if there is not anything here, then it means your IDOC has reached R/3.................
then in R/3, execute WE05 for the relevant period, then you will see your IDOC there with some status..........
Regards,
Rajeev Gupta -
XI 3 File to IDoc scenario - Still referencing Old Logical system
Hi
Dont know if you can help. I have a file to idoc scenario using XI 3 to R/3 4.6c system.
I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
Regards
Danielhi daniel...
this thread wud answer ur query....
Re: IDOC Payload
regards..
vishal -
Alert Configuration for File to IDoc scenario
I have followed Alerts : Step-by-Step /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
and configured Alerts for file to IDoc scenario.
But the problem is, I did not notice any alerts being generated. I could notice the IDocs being posted to destination system. So I was going through Alerts-Troubleshoute Guide. In intension to maintain monitoring level, I clicked Configuration tab. But I did not notice my sender and receiver system there to maintain.
Can any body help me to detail out the procedure to add sender and receiver systems to maintain the monitoring level?
Regards,
Suraj Kumarhi Suraj,
WHich SP version are you on??
If you are on Sp14 or above, then unfortunately, Michal's Trouble Shooting for Alerts will not help.
From SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note <b>870232</b> for this info.
Next, to test if your Alerts have been defined correctly, go to SE38. In the program , type RSALERTTEST and then click on EXECUTE button ( F8 ). In the next window, it will ask you for your ALERTCATEGORY. Just give the name of your ALERT CATEGORY and click EXECUTE.
If you have configured your alerts correctly, you will receive a message that tells ALERT IS GENERATED and will give the ALERT ID.
Now, go to your Run TIme workbench and then select ALERT INBOX and see if you have got the ALERT message in your ALERT INBOX.
If this is working fine, then the last step, implement the note 913858.
Regards,
Bhavesh -
Problem with Sender service in File to IDOC scenario
Hello All,
Am doing a file to IDOC scenario.
I have configured the sending system as a party and added a business component, to the BC attached the service interface and also configured the sender Communication channel(CC) as file.
On the receiving end configured the R/3 system from SLD as the business system and configured the receiver CCl. Can see the R/3 logical system in the Adapter specific identifiers at business system.
Pushing the file get an error "Unable to convert the sender service to an ALE Logical System". But choosing "Take sender from Payload" in the receiver CC is resolving the problem, however the sender partner number remains the same as what I have mapped to the control record in message mapping (which is like hard coding).
My questions are:
1. Am I doing the correct config in terms of the scenario. (like using "Take sender from Payload")
2. I tried using identifiers at the party level to convert the sending system, but nothing seems to work. But sending system remains the same as the constant from mapping.
Suggestions would be very much helpful..
--Prashanth
PS: Have gone through many blogs and posts on the forums, but may be I did not see the correct thread. Apologies if I am asking this again.Hi Prashanth,
refer the below discussion i think it will solve your problem.
File To Idoc scenario
Thanks -
Regarding RFC connection in File to IDOC Scenario
Hi everyone,
I was configuring file to Idoc Scenario, i have made all the required configurations in SLD, IR and ID, in XI system and in R/3 System. i have created RFC connection from XI to R/3 system, and its working fine. i have created an Partner profile in WE20 with sender file system name with inbound parameters. <i>But still i am getting error as EDI Partner Profile not defined in WE05- iDOC ADDED WITH ERRORS. </i><b>Do we need to create an RFC connection from R/3 system to XI for file to Idoc Scenario</b>
<b>!!! Note: RFC connection from R/3 system to XI is not working, will this be a problem for file to idoc scenario. !!!</b>
Regards,
Varun Reddy.KHi Varun
Follow these steps
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
Regards,
Santosh -
Error in File-PI-Idoc scenario
Dear All,
While working on File-PI-Idoc scenario, I am getting the error as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">UNAUTHORIZED</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have checked various other posts on the same error but still I am not able to resolve this.
Please help me in resolving this error.
reg,
njNishu,
Please check whether you have assigned the following roles to the particular user you are using for data communication.
Roles:
SAP_XI_IS_SERV_USER,
SAP_XI_APPL_SERV_USER
Regards,
Sugata -
Problem in executing File to IDoc Scenario in XI
Hello,
I am Working in HR Payroll module and new to XI.We are implementing File to IDoc Scenario in XI.When I place the flat file in the application server the file is read but the contents of the flat file is not getting posted to the IDoc.The constant values defined for IDoc in Mapping program is getting posted .I am not able to trace the error.
kindly help me out in resolving this problem.IF there is any way of debugging the entire process please let me know.
Thanks & Regards,
Malathi V.hi,
check this blog to test your mapping,
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Next, check your INBOUND MESSAGE in SXMB_MONI and check if the content conversion has been perfromed as expected.
these steps will help you reason out the cause of your problem.
Regards,
Bhavesh -
File to IDoc Scenario: Idoc Status 50
Hello,
I have a problem in doing a File to IDoc Scenario with a simple XML file mapped to IDoc "CREMAS.CREMAS03". In the beginning, I got a status 56:"IDoc with errors added". Then I added a logical system (LS name of my sender)manually in "Display IMG";however, it didn't work. So I simply changed the logical system name of my sender to XI_00_800 which already exists in R/3. I tried the scenario again, then I got the status 50:"IDoc added". Looked like the IDoc still hadn't been correctly inserted as a record. May I ask what other steps or configurations do I need to do to get this scenario to work? Thank you.Steve,
<i>Moreover, I didn't create any partner profile. The "XI_00_800" partner profile is in the system all along. Should I create a whole new partner profile and point that to my sender business system?</i>
You need not create it once again as it already exists. Normally , ALE configurations on an R3 system are the responsibiltis of the Functional Team. For instance , on our projects we are never given access to the End r3 systems and the Partner profile are created by the F'nal team itself.
Like I mentioned, ask your F'nal team why you are getting this issue. From XI side , there is nothing more you need to do.
Regards,
Bhavesh
Maybe you are looking for
-
Windows Installer error while trying to install Acrobat Reader 8
I am trying to install Adobe Acrobat Reader 8 off the CS3 disc. I already have Acrobat 8 Professional (8.2.3) installed. I just need the Reader. Whenever I try to install the Reader I get the following error, "The Windows Installer Service could not
-
Constants reading in abap report
Hello All, i have developed a custom report which is having the feilds like pernr,workdate,time these all fields it is fetching from catsdb table adn displaying it in alv grid display,now my requirement is i need to display a consta called break time
-
New Ipod Touch: Will not delete apps, there's no x when wiggling
This oddity didn't show up on a search of this site Brand new iTouch. OS 3.12 on Touch, 9.0.2.25 for iTune on a PC According to the manual, to delete an app, on the touch you touch/hold an icon until the wiggling starts, then tap an x in the icon's c
-
Steps after buying a used iPhone 6
I'm buying a used iPhone. What steps should I take immediately after I receive the iPhone, to make sure that everything is OK, that I got what I paid for, and that I'm not receiving a lemon? For instance, it might be nice to check that it wasn't repo
-
Adding a new link to workcenter group
Hi I have to add a link of 'competitors' to the UI in the accounts workcenter group. I have created a component for the competitors but am not able to make out how do i link it to the 'Accounts' workcenter group. Can anyone help me out please. Thanks