File to IDOC scenerio (Please help)

Hi Friends,
Please provide me a sample document with screen shots for the below mentioned scenerio.
File--> XI--
IDOC.
This would be a great help. Seeking the early responses.
Please note ID also, if wish to send it on this.
sonisapabapATyahooDOTcoDOTin

refer:
Step by Step Guide - File to IDOC Scenario
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
The specified item was not found.
File to Multiple IDocs (XSLT Mapping)
Edited by: preethi Prabhu RadhaKrishnan on Sep 4, 2008 3:19 PM

Similar Messages

  • I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

    I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

    Hi olivias,
    It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
    How to change the default application for a file type | Macworld
    http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
    Please let us know if you have additional questions.
    Best,
    Sara

  • Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    I am not aware of a field type "Help" within a PDF form. I do not see it as a form field that can be added in the form edit mode.
    Forms Central forms do not support all the features of Acrobat forms.
    Are you talking about the "Tool Tips" or a hidden field that only shows when one enters a field and is hidden upon exiting the field.

  • HT1553 Hi, I'm stuck at step 9. I don't see my external harddrive when I want to save the DMG backup file. Can you please help me with this? I'm desperate to make this backup! Big thanx in advance!

    Hi, I'm stuck at step 9. I don't see my external harddrive when I want to save the DMG backup file. Can you please help me with this? I'm desperate to make this backup! Big thanx in advance!
    http://support.apple.com/kb/HT1553

    Repair permissions and restart your computer.  If this does not work, zap the pram.  You should now see your external hard drive. 

  • Hello i am rajesh i am having problem while conveting other files into pdf format please help me

    i am rajesh i am having problem while converting other files into acrobat format please help me

    Hello Rajesh,
    I'm sorry to hear you're having trouble. Are you using Acrobat.com to convert your files to PDF? Please let me know where you are having trouble and I will do my best to help you convert your files. For your reference, here is a list of filetypes that can be converted to PDF online with Acrobat.com:
    http://kb2.adobe.com/cps/524/cpsid_52456.html#Create%20PDF
    Best,
    Rebecca

  • I am trying to stream music from my iMac using iTunes music files to my Cocktail Audio X10 music streamer. I have allowed my files to be shared the X10 sees the files but when I try to accsess them it gives me the message files not mounted. Please help?

    I am trying to stream music from my iMac using iTunes music files to my Cocktail Audio X10 music streamer. I have allowed my files to be shared the X10 sees the files but when I try to accsess them it gives me the message files not mounted. Please help?

    No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.

  • I receive the below error when imprting an .eex file .... please help

    I receive the below error when imprting an .eex file .... please help
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Folder with identifier 'XXWFS_FA_ASSETS_V'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'ASSET_NUMBER'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'DATE_PLACED_IN_SERVICE'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'DEPRECIATION_AMT'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'DEPRECIATION_METHOD'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'DESCRIPTION'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'LIFE_IN_MONTHS'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'ORIGINAL_COST'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'PERIOD_NAME'
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'YTD_DEPERIATION_AMT'
    Import completed, but with warnings. Please check the result.
    File(s) imported partially :
    C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex

    Hi,
    You don't say what components you are trying to import into the EUL. But it could be that you are importing a business area which has security access granted to a user that is not defined on the target system. It could also be that the user you are using to do the import does not have admin access to all the components you are importing.
    Rod West

  • I was listening to a you tube clip.  i guess i didn't click off the actual clip, because now when i turn on my computer the clip audio plays. i can't locate the file to delete it. please help.

    i was listening to a you tube clip.  i guess i didn't click off the actual clip, because now when i turn on my computer the clip audio plays. i can't locate the file to delete it. please help.

      Quit Safari.
      Hold the shift key down and relaunch Safari.
    Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    Best.

  • Photoshop CC program error when opening or placing files. VERY FRUSTRATING PLEASE HELP.

    I'm an advertising graduate student that relies heavily on Adobe programs for my multiple simultaneous projects throughout the school year, specifically Photoshop, Illustrator, InDesign, Muse, Edge Animate and Premiere Pro.
    I'm using a MacBook Pro running OS X Yosemite.
    I have been experiencing an incredibly frustrating issue with Photoshop and Muse, both CC 2014. I'll speak about Photoshop in this thread since, well, this is a Photoshop forum. This has been happening for almost a year now. I figured Adobe would've fixed this problem by now, especially given the myriad of crash reports I send.
    While working in Photoshop, sometimes when I go to place a file I get an error message that says "Could not complete your request because of a program error." It used to be that this error was fatal and I would have no other choice but to force quit out of Photoshop and restart it. We all know how incredibly time-consuming it is for Photoshop to open (especially 10-15 times in one sitting), and being in grad school, time is not something I have a lot of when I have deadlines and projects due.
    This error is still happening and for the same reasons; however, now I can still continue to work on my file, as long as I don't need to open a document or place an image...which doesn't help very much because I'm doing a lot of mockups and composites and need those functionalities. It happens probably 90% of the time when I try to place or open a document.
    For the record, it's a similar issue that's causing Muse to crash as well. When I try to add an image file, it causes the entire program to crash "unexpectedly," as Muse so eloquently puts it.
    Until recently I had kept CS6 on my hard drive and would dig it out to use in place of CC when PSCC would crash; however, someone told me that having both versions was likely the cause for the crashes. After much hesitation, I finally uninstalled all of CS6 from my hard drive the other day (the right way, not into the trash can, since someone is inevitably going to ask that question) and I'm still having this problem, and now I don't have my CS6 version to fall back on and now I'm in a really bad spot.
    I apologize for all the rambling, but I'm really very, very frustrated with this error, and I had to do something while waiting for Photoshop to restart. Someone please help.

    MacOS 10.10? Yeah, Apple is working on that bug.  They already fixed the crash in the open/save dialogs, but have a few more problems to address with the open/save dialogs.

  • Replacing places.sqlite with older file is not working, please help I need my bookmarks

    My hard drive was recently crashed so I had to reinstall windows 7 operating system. I recovered the deleted places.sqlite file from before the crash. I replaced the old file with new places.sqlite file but is not restoring any of the bookmarks
    Please help, I have a lot of important bookmarks stored in old file
    Please suggest a way to open the places.sqlite file manually & extract bookmarks from it or any other way to get the bookmarks back

    It is possible that this copy of places.sqlite is corrupted if your bookmarks aren't restored and in that case you can't use this file and will have to delete all the places files (-shm and -wal as well)
    If you also have a copy of the JSON backups in the bookmarkbackups folder then try to restore the bookmarks that way.
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    *https://support.mozilla.org/kb/restore-bookmarks-from-backup-or-move-them
    You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    See also:
    *Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Error in file to idoc scenerio

    hi
    in file to idoc scenario
    i got error in sxmb_moni
    in status  it is showing recording,
    in Q.status it is showing stop symbol.
    waiting for suggestions.

    Hi Sandeep,
    Have a look at queue problms here
    /people/prashanth.azharuddin/blog/2006/11/24/some-errors-in-an-xi-production-environment
    Some additional help
    Q.Status is "Queue stopped"
    queue status is stopped
    Regards,
    Prateek

  • Can't convert Canon CR2 RAW files to photoshop CS2- please help!

    I have a Canon EOS Rebel XT and am using Photoshop CS2 and can not open my Raw images. Canon saves the images as a CS2 file. I guess needs converting.. Please Help!!

    Daag Kees,
    >[Kees] DNG converter 4_3_1 don't convert my raw Leica M8- images to digital negatives files that will open in Photoshop CS 8.0.1. (Camera raw 2.0).
    Of course not. You need ACR (Camera Raw) version 2.4. Version 2.0 does NOT support DNGs.
    After you correctly install ACR 2.4 according to the instructions on the download page and after you relaunch Photoshop, you need to Purge the Cache for each folder.
    >[Michael] Simply run the DNG converter and point it at your M8 raw files and they will be converted to DNG.
    Nope. Point the DNG Converter to a folder containing RAW files, not to the raw files themselves. The DNG Converter works on Folders containing raw files, not on individual files.
    >What means "using Bridge" ?
    Forget that. It does NOT apply to Photoshop 8.x. In CS3, you can have ACR hosted either by Photoshop or by Bridge. Photoshop 8.x doesn't even have Bridge.
    Prettige Kerstdagen!

  • Error installing Adobe in Program Files... PLEASE HELP!

    Hi,
    I´m trying to install the trial of Adobe CS6 Master Collection (FOR PC) in the folder Program files and I always get this message:
    "download may fail to this folder due to restrictive access privileges. Please select a different folder."
    I´ve tried installing it in another folders and the problem is the same... If I try to install it in a completely different place (as the desktop), it initially lets me but after that, when the installation starts, it says that there is the error 109 and that I cannot install...
    WHAT CAN I DO? PLEASE HELP!
    Thank you very much.

    We cannot know, but it sounds like you simply don't have the proper user privileges and are not the administrator. This is nothing Adobe can fix for you. Talk to your IT department/ the computer owner or if in fact you are your own admin, log in with a proper account and turn off security tools and whatnot...
    Mylenium

  • Important Microsoft Office 2011 Excel File isn't opening Please Help!

    Hello everyone,
    I'm having problems opening one single excel file. I've tried others and they open with no issue. This file I'm trying to open now opened 2 days ago as it's a project I've been working on and I desperately need to get back to working on it!
    I'm running OS X 10.8.4 on a Macbook Pro with Microsoft Office 2011. When I open the workbook it loads the progress bar, then doesn't show anything from excel apart from the top bar with file/edit/view... etc
    When I try and open it from this point it gives me a message
    'XXX.xlsx is already open.
    Reopening will cause any changes you made to be discarded. Do you want to reopen XXX.xlsx
    PLEASE HELP and don't hesistate to ask for anymore information if you need it. Thank you.

    Such instances are examples of why one should maintain good backups.  I suggest you consider using Time Macnine backups.  It would allow you to go back in time to earlier versions of the file if a later one is corrupted or if you save unwanted changes by mistake.
    You would need a $80 external disk drive for the Time Machine volume.  Your data is much more valuable than that $80 cost.  Disks can fail at any time, taking all of your data with them.
    Time Machine Basics: http://support.apple.com/kb/ht1427
    Most commonly used backup methods: 
    https://discussions.apple.com/docs/DOC-3045

  • File Upload / ENCTYPE Problem - Please HELP !!!!!!

    Please HELP !!!
    I have following config. MS Windows Server 2003 with
    Coldfusion 7. Everything is working fine.
    But now I want to upload a file, and there is the problem
    that I have the wrong content type on my action page, and so my
    form field "FileContents" is empty.
    On my action page i have got content_type
    "application/x-www-form-urlencoded" instead of
    "multipart/form-data".
    Here is the code:
    --------------------uploadfileform.cfm--------------------
    <cfoutput>
    <form enctype="multipart/form-data" method="post"
    action="uploadfileaction.cfm" name="uploadForm" id="uploadForm">
    <input name="FileContents" type="file"
    id="FileContents">
    <br>
    <input name="submit" type="submit" value="Upload File">
    </form>
    </cfoutput>
    --------------------uploadfileaction.cfm--------------------
    <cffile action="upload" fileField="FileContents"
    destination="e:\tempdir" nameConflict="MakeUnique">
    If there is anyone who can help me please be so kind and tell
    me the solution.
    Kind Regards!

    On my action page i have got content_type
    "application/x-www-form-urlencoded" instead of
    "multipart/form-data".
    There is no need for that sort of thing on the action page.
    On the action page the cffile tag is enough.
    Everything else seems to be all right, except one. The
    destination attribute should end with a back-slash. The correct
    value is
    destination="e:\tempdir\".

Maybe you are looking for