File to IDOC with content conversion
Hi
I am trying to do a file content conversion scenario. This is a fixed length file which needs to be converted to idoc.
I have configured IR and ID (FCC parameters added). While testing the end-end scenario we are able to see that sender adapter has successfully read the message , but we are not able to see any message in SXMB_MONI.
Please help
Following is the file structure
"RecordType HeaderField2 HeaderField3"
"RecordType LineItem2 LineItem3"
"RecordType TrailerField2 TrailerField3"
Following are content conversion Parameters [KeyFieldName -> RecordType]
HeaderRow.beginSeparator -> '"'
HeaderRow.fieldFixedLengths -> 10,20,10 (for ex)
HeaderRow.fieldNames -> RecordType,HeaderField2,HeaderField3
HeaderRow.keyFieldValue -> 01 (COnstant)
HeaderRow1.endSeparator -> '"'
Similar for line item and trailer
Is there any way to check our input file against the content conversion parameters to make sure that they are correct
Thanks
Similar Messages
-
File-Sender: Probl. with Content conversion - Read whole line in singleTag
Hello,
I have a flat file that i read with the sender file adapter.
After content conversion I get not the result i wished to have...
The source flat file looks for example like this:
ABC;DEF;GHIJ
KLM;NOP;Q
RSTU;VW
After the Content Conversion I would like to have this result:
<Recordset>
<Data>
<Row>ABC;DEF;GHIJ
<Row>KLM;NOP;Q
<Row>RSTU;VW
< >
What sounds very similar but didnt work for me yesterday .
I defined a data type that looked like this:
DT_TEST (Complex Type)
Recordset (0..unbounded)
Data (1)
Row (type string / 0..unbounded)
During the file content conversion I just did this:
Recordsetname: Recordset
Recordset structure: Data, 1
Data.fieldNames = Row
Data.fieldSeparator = nl
This was also described in blog:
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
But my result is always like this:
<Recordset>
<Data>
<Row>ABC;DEF;GHIJ
</Data>
</Recordset>
<Recordset>
<Data>
<Row> KLM;NOP;Q
</Data>
</Recordset>
<Recordset>
<Data>
<Row> RSTU;VW
</Data>
</Recordset>
.And not like I wished .
Can anybody help me ?
Greetings
TobiasHi,
I just gone thru the blog and as per the structure defined I have no idea how this works this way.
But if you modify the structure to
RecordSet - occurs 0-1
Data - occurs 0-n
Row - occurs 0-1
And in the Content conversion mentions Data,* instead of Data,1.
In this case you will be getting a output like
<Data>
<Row>ddf,sdfsd,sdf</Row>
</Data>
<Data>
<Row>fff,sdfsd,sdf</Row>
</Data>
You can achieve this but I don't have any idea how to generate that kind of output with the Structure and the conversion parameter mentioned in the blog.
Thanks,
Prakash -
File Adapter with Content Conversion
Hi -
I am trying to convert a Flat file which has data as
firstnamelastnamecompanyName
Now i have created a message type which has a root name as Contact and its children are FirstName,LastName,Company.
And in the configurator i have created a file adapter with the content conversion, but being very new to XI i have never used a file adapter with content conversion. This is what i have in my Content Conversion Parameters.Please correct my code.
Document Name :: MT_Contact
Document Namespace :: http://venkat
Document Offset :: <i>i did not enter anything here</i>
Recordset Name :: RootNode(i gave this name just like that,,, Should it be something from the IR??
Recordset NameSpace:: <i>i did not enter anything here</i>
Recordset Structure:: Contact (this is the name in my IR
Recordset Sequence :: Ascending
Recordsets per Message :: Contact,* (Can someone explain what should be given here)
Then in the bottom in the name value pairs i have given
Contact.fieldNames = FirstName,LastName,Company
Contact.fieldSeparator = #
When i am using the above configuration the error i am getting in RWB is Error: Conversion initialization failed: Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Format error in 'xml.recordset' argument: incomplete structure (name,number) pairInvalid 'xml.recordsetsPerMessage' value 'Contact,*' found
I am very new to XI and i am unable to understand what exactly each field means in the file adapter when the content coversion is used. Can someone take the pain of explaining them.
Thank you
VenkatHi,
Use the following to create an XML strucutre like this,
<MT_CONTACT>
<CONTACT>
<FirstName> </FirstName>
<LastName> </LastName>
<CompanyName> </CompanyName>
</CONTACT>
<MT_CONTACT>
DocumentName : MT_TEST
DocumentNamespace : Yournamespace
RecordserName : record
RecordsetStructure : CONTACT,1
In the table,
ignoreRecordsetName : true
CONTACT.fieldNames : FirstName,LastName,CompanyName
CONTACT.fieldSeparator : #
Go through the links suggested by moorthy and also these blogs to understand content conversion better,
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
Regards,
Bhavesh -
File sender adapter and content conversion with polish character
We are loading a csv file with PI 7.0 file sender adapter using "content conversion" - all fields go through EXCEPT a special character hex '208C' (space in front) looks like "Æ" is converted to hex 'C28C'.
We are using code page UTF8
We are using:
enclosuresign "
enclosuresignescape ""
fieldcontentformatting nothing
enclosureconversion NO
Hope some one can helpHi Bohamo,
Hope you have set the following for your file sender adapter :
1. Transfer Mode is set to Binary,
2. File Type Text,
3. Encoding ISO-8859-1( for Western European Latin ).
Inorder to recognize Polish Character, try as follows :
Your sender file after coming into Pi has XML encoding declaration 'UTF-8'.
Write a simple XSLT mapping to change the value of the attribute "encoding" to "ISO-8859-1" in the output XML of message mapping . Include this XSLT map as the second mapping step in your interface mapping.
First step in your interface mapping will be your already existing message mapping.
An example of the XSL code :
<?xml version='1.0'?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method='xml' encoding='ISO-8859-1' />
<xsl:template match="/">
<xsl:copy-of select="*" />
</xsl:template>
</xsl:stylesheet>
or you can also do java mapping if you are comfortable with java code !
Cheers,
Ram. -
File sender with content conversion and ignoreRecordsetName
Him,
I have an scenario with a compressed file sender with content conversion.
In my sender cc i have:
1 AF_Modules/PayloadZipBean Local Enterprise Bean unzip
2 AF_Modules/MessageTransformBean Local Enterprise Bean transform
3 CallSapAdapter Local Enterprise Bean 2
In module configuration, I have also added:
xml.ignoreRecordsetName --> true
But RecordsetName is not removed from XML
Why?
thanks, in advance
CarmeHi,
No need to enter anything in module configuration. Just specify following Name-Value pair in the table provided on the Content Conversion tab of your file adapter.
Add a row with Name = ignoreRecordsetName and Value = true (Both case-sensitive)
For details, see [this link|http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm].
[some more here|http://www.riyaz.net/blog/index.php/2008/02/20/xipi-file-content-conversion-for-complex-structures/]
Regards,
Riyaz -
Problem with reciver file adapter in the content conversion.
I have starnge situation where the fileds in the file created after the content conversion are center aligned.
Can someone let me know how to make it right aligned?
For eg, i have a field with Char(6) in the file it looks as follows:
1.23 -> | 1.23 |
10.23 -> |10.23 |
100.23-> |100.23|
I want it to be like this :
1.23 -> | 1.23|
10.23 -> | 10.23|
100.23-> |100.23|
Please let me know ASAP as its a critical issue for the customer.
Warm Regards,
Nilesh KumarHi Nilesh,
if You are using file content conversion on Sender Adapter, then do you java mapping between your two interfaces(sender and receiver)
use java.text methods for formatting the values according to your requirement.
first check the java API 1.4.2....
with in that check java.text.* methods
Also there will be lot of examples availble on internet on this. Check online.
Also check this link this will definitely solve issue
[http://www.iro.umontreal.ca/~vaucher/Java/tutorials/Formatting.html]
Sample code on this link
double x = 1.0 / 7;
for (int n = 1; n<5; n++)
System.out.println( "1/7 : " + format( x, n, -6)
+ format( x, n, 10));
Thanks
Gujjeti
Edited by: Praveen Gujjeti on Apr 16, 2008 6:16 AM -
Creating a file with content conversion
Hi all,
I have a scenario in XI which i create a file in it,
I want to create the file with the content conversion option but with no field separator.
I have an error message - "File adapter receiver channel is not initialized. Unable to proceed: null" if i don't use the fieldSeperator option.
I don't want to use this option, I want the file to be created without separators.
Thanks,
NaamaHi Namma,
Go through very imp blogs:
File Content prameters for the Receiver Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Refer
File Receiver with Content Conversion
File Receiver with Content Conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites:
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
The specified item was not found. - FCC
File Content Conversion for Unequal Number of Columns
File Content Conversion for Unequal Number of Columns - FCC
Content Conversion (Pattern/Random content in input file)
Content Conversion (Pattern/Random content in input file) - FCC
XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
Thanks,
Satya Kumar -
FCC: Problems with content conversion
Dear all,
I have a receiver FTP adapter with content conversion. In RWB I'm facing following error message:
Adapter Framework caught exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'FCOTUPI')', probably configuration error in file adapter (XML parser error)'
The field with value FCOTUPI could be found in POS recordset. I double check the length of columns but couldn't find
an error.
CC configuration:
Recordset structure: HEADER,POS,SUBPOS
HEADER.fieldFixedLengths = 8,4,8
POS.fieldFixedLengths = 8,20,15,3
SUBPOS.fieldFixedLengths = 5,5
HEADER.fixedLengthTooShortHandling = Cut
POS.fixedLengthTooShortHandling = Cut
SUBPOS.fixedLengthTooShortHandling = Cut
As you can see by the names, I am using as XML to convert a structure with subnodes. In documentation it said
that it is not allowed, but in some threads I found the information that structure could be processed.
Any ideas how to solve this problem?
Thanks
ChrisDear Amit,
thanks for your answer. I already checked this blog, but hoped for other solutions.
My problem: I tried to map my hierarchical structure to a flat structure.
Source
Struc1 (0..unbounded)
-Item1.1
-Struc2 (0..unbounded)
--Item 2.1
--Struc3 (0..unbounded)
---Item3.1
Target:
Struc1 (0..unbounded)
-Item1.1
Struc2 (0..unbounded)
-Item 2.1
Struc3 (0..unbounded)
-Item3.1
But if e.g. the Struc2 appears two time it will be created two time in target structure before
the Struc3 is created. But ths Struc3 belongs to Struc2 and should be created in flat file under
Struc2 directly.
How can we created a flat structure like this
Struc1
Struc2
Struc3
Struc3
Struc2
Struc3
Thanks
Chris -
Flat File to XML using content conversion.
Hi Experts,
I am converting a flat file to xml structure.
i need the structure of xml like :
<LineA>
</LineA>
<LineB>
<LineC>
</LineC>
</LineB>
I am able to generate it in hierarchy
<LineA>
</LineA>
<LineB>
</LineB>
<LineC>
</LineC>
How should i write structure of Recordset so that for LineC so that it comes under the LineB tag ? I also dont want the name of recordset in my output, how can i do that ?
Kulwinder.Hi
Refer
File Receiver with Content Conversion
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
File Content Conversion for Unequal Number of Columns
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
Content Conversion (Pattern/Random content in input file)
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file - FCC
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario - FCC - MDM
XI in the role of a FTP
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp - FCC
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - FCC
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter - EOIO - File
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent -
How to verify receiver jms scenarios with content conversion
Hi All,
I m doing a Content Conversion at receiver JMS Side.
The jms queue is installed in a Mainframe System. i heard that messagesa will be showed only in hexadecimal mode in mainframe system.
So how to verify my scenario?
Is there any way i can check the content cnversion part?Hi,
Hope these links will help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ffd890-0201-0010-708f-d5dad2dfcf3a
fine tuning
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/412290ec-0201-0010-0790-dfd946efc5f4
FCC @ receiver
File Receiver with Content Conversion
FCC @ sender
Content Conversion (Pattern/Random content in input file)
regards,
Prashant -
Problems with content conversion in File Receiver Adapter
Hello, everybody.
I have a RFC-to-File scenario with file content conversion. Everything is working well except that my file is generated with 2 blank lines at the top of it.
The function module has 3 importing parameters (1 optional) and the file content comes from an internal table.
Is it caused by the function module parameters? If yes, how can I avoid this, once I really need them? If not, does anyone have any idea?
Thanks a lot,
Marcos.Hi, Raj.
Here they are the function module parameters:
Importing parameters:
ICARRIER TYPE CHAR1
FPATH TYPE IPATH
IFILE LIKE VBAK-BNAME
Tables
IYLASDS_RECPT LIKE YLASDS_RECPT
The structure YLASDS_RECPT has only one field with a single line of the file. I am using this field as the <i>Recordset Name</i> inside file adpater parameters.
There is no mapping between RFC and FTP messages.
Thanks a lot,
Marcos. -
Proxy - ABAP mapping - file with content conversion
Scenario goes from ECC (proxy) to XI then I do ABAP mapping. I have tested the ABAP mapping with SXI_mapping_test transaction. My ABAP mapping puts the payload back into XML and then the data goes to a file adapter where I also use content conversion. If I do not do the content conversion the data comes out correct in XML. When I change to content conversion I get 20 blank lines. Is it possible to do content conversion from ABAP mapping?
Any help would be greatly appreciated.
Thanks
Skip FordHi,
Have you checked whether the blank lines you got in the XML files are from the blank nodes or elements which you created in ABAP mapping?
If it is, then just create your elements or nodes whenever there are corresponding values in your ABAP mapping.
e.g.
If l_sender_service is NOT initial.
elementsender = odocument->create_simple_element(
name = 'SenderService'
value = l_sender_service
parent = msgtype ).
endif.
Regards,
Lim... -
Sender file adapter with content conversion Simple XML
Hi experts,
I'm trying to parametrize my sender file adapter content conversion.
I'm receiving a text file with one single line like:
AA1;AA2; AA3;
and I want to convert it to an XML like
<MT_A1>
<field1>AA1</field1>
<field2>AA2</field2>
<field3>AA3</field3>
</MT_A1>
Actually I know how to do somenthing like
<MT_A1>
<LINE>
<field1>AA1</field1>
<field2>AA2</field2>
<field3>AA3</field3>
<LINE>
</MT_A1>
What I want is remove the <LINE> tag from my XML.
Regards
Gonzalo
Edited by: Gonzalo del Castillo on Nov 28, 2008 2:18 PMHi
Use this help document for receiver FCC
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Content Conversion (Pattern/Random content in input file)
File conversion text to xml (Few Last Post) -
Dynamic file name in receiver - empty line problem with content conversion
Hi,
I do a variable substitution from a filename node in my xml structure. Because I don't want to have the the filename in my flatfile i supress the output with the conversion parameters:
filename.fixedLengthTooShortHandling = Cut
filename.fieldFixedLengths = 0
It's working but: the adapter is puting an empty line at the end of the file. If I even put the filename node at the top of the xml struture it generates the empty line at the top of the flatfile.
Anyone has an idea? is there an other way to set the filename or how can I supress this empty line( I have to) ?
Regrads
J.Jorg,
Actually speaking we cannot get rid of this with XI. You have to write a OS script to remove this.
Else
you add one more parameter as .endSeparator as backspace ie., 0x08. It will definitely remove the line but I think it is putting a square box at the end of previous line. Please check by giving this and let us know the updates.
Regards,
---Satish -
File to IDOC, with External Definition to hold multiple IDocs
Hello Experts,
I am configuring a sample File to IDOC scenario. Here are the steps I am following, can you please guide me what I am missing here.
I am having a flat file with 10 records to be transferred to my ECC system through IDOC adapter to create 10 different IDocs.
1. I am picking up my flat file using a 3rd party Business System with File Content Conversion
2. I uploaded CREMAS Idoc and exported as XSD file and modified Occurences paramter to unbounded and uploaded back as an External file definition into IR
3. I defined an SAP WEBAS ABAP type Business System with LS (representing my ECC system) and configured with IDOC Rcvr channel.
4. In the IDOC recvr Channel, I specified RFC destination pointing to my ECC system & Port, Release...etc
5. On the ECC side, I configurated a PARTNER PROFILE with the above mentioned LS(used in step 3) and added an Inbound Idoc paramter CREMAS with process code CRE1. Selected the option Trigger Immediately.
Testing:
1. When I checked my CC monitoring in RWB, my file on the sourced is getting picked up successfull with respect to the specified polling intervals.
2. I don;t see any messages in my SXMB_MONI. I verified SXMB_ADM configuration it looks fine to me
3. I used TCode:WE02 on ECC side, nothing is there
4. I used Tcode SM58 on ECC side, nothign is there
I have no idea what is happening after successfully picking up the file on the source side.
Is there a way to trace where exactly the error is or what is wrong with my scenario?
Just an observation, We don;t need to specifiy any LS on the Sender Business Sytem(3rd party in my case) which picks up my file on the source side. Rather I am specifiying LS on the Target Business Sytem(type WEBAS ABAP in my case) to send my IDOC to ECC system. I am using the same LS to define PP on ECC system.
Edited by: Chris Rock on Oct 21, 2008 5:03 PMAamir,
I tried full cache refresh, also cleared SLD Cache for both IR & ID. No luck.
I think either some thing wrong in connection parameters, but atleast if I see some error in Moni or RWB, it helps, but in my situation, nothing is showing up there.
Connections:
I specified PORT & RFC Dest in IDOC RCVR Adapter along with WEBAS Release version. These PORT & RFCs are created in XI using SM59 & IDX1 and both passed the connection test.
On the ECC side, I created a PP with inbound Idoc CREMAS and process code as CRE1. This PP uses the LS that was used in RCVR BS specified in XI side.
I also loaded Idoc meta data into XI with Tcode: IDX2
Please help me, any body. I will sincerely award the points.
Maybe you are looking for
-
Long load times and poor application performance
We have packaged and deployed Adobe CC using SCCM within my school division. It pushed out fine, but now when we attempt to open Photoshop (or any other CC app) it has unusually long load times. 2-4 minutes. It seems to be hanging at the "Reading pre
-
Sending an email, containing an adobe interactive form, as a step in a gp
I'm trying to create a process in gp. the first step is an interactive form that is submitted to netweaver and starts the gp process. second should be another interactive form that the system sends out to an email account. wstarting the process by in
-
How do I set up my Imac after adding a SSD along with my existing HD
How do I set up my Imac after adding a SSD so that my system and apps are on the SSD and everything else is on the HD? I am using mountain Lion. I want to make sure I can still do Time Machine backups. I was planning on first formatting the SSD an
-
Would the always on feature on the usb port of my t420s still work (always on) through a thinkpad mini dock? Thanks
-
Flash, Flex, and the iPad
While there is no shortage of iPad/Flash discussions on the Adobe and Apple forums, after searching for a couple hours now I have been unable to find the answers to my specific question. So please forgive me if I missed it somewhere. As I understand