File to Idoc with error in trfc

Hello,
I have a scenario like
File -> XI -> (idoc) R3
The scenario works fine but yesterday I had a problem with the user in the rfc destination(pwd wrong) which is used for the idoc-adapter. In the sxmb_Moni and the RWB the msg. got an success flag/info but it was not delivered to the r3 because the rfc-destintion could not work.
I know that the idoc-adapter is not part of the adapter-engine and my understanding was that the adapter send his status back to the integration engine. But in this cause I got no feedback from the adapter. I think this is not Ok or I am wrong ?
Regards Jami

Hi Jami,
The reason is simple.....the message is sent from the integration server to the adapter engine which was susessful.but what went wrong is the rfc destination being wrong in the receiver adapter which is not known to the integration server. So in simple words, if things work fine in your integration server then it will not throw an error in your sxmb_moni. So had there been a problem between the message transfer from the integration engine to the adapter engine then it would have surely given you an error in your sxmb_moni(for example you specify some wrong parameters while configuring your receiver IDOC adapter).
But in this case since we dont have an IDOC adapter in the component monitoring (it has adapters which are in the JAVA stack only but IDOC adapter is in the ABAP stack)we can see the error in SM58 only.
I hope this answers your question fully. If any other doubts regarding the same pls do ask me.
Regards,
Abhy
Message was edited by: Abhy Thomas

Similar Messages

Status 56 - IDOC with errors added

Hi everyone,
 I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "EDI: Partner Profile not available".
 but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
 The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Error in Receiver - IDoc with errors added

Hi All,
I am getting error in 56 - IDoc with errors added in receiver System.
I am new in Idoc - please tell me How to resolve this issue..
Thanks in advance..

Hi all thanks for reply .
All are the help full answer ,
I use T-code WE19 and change partner profile and execute now it is fine.
But i have checked all configuration regard partner profile from T-code WE20 it looking everything is fine but in Test tool for Idoc Processing by t-code WE19 i have checked it will taken wrong partner profile detail after giving correct manually now it is working fine.

I cannot open files in excel with error message "The file name or path contains invalid characters

I cannot open files in excel with error message "The file name or path contains invalid characters

Found the solution. The hardrive name was changed to "/" which is not a recognised file path character. So I changed the name to "Mac" then I was able to already open all files in excel and word

Idocs with error status

Hi Everyone,
How to find all idocs with error status for a given date range?

Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik

Idocs with errors added status-56 in file to idoc scenario- how to rectify

hi ,
in file to idoc scenario when i m sending the file from ftp server to IS Retail, file is successfully getting processed but the idoc is showing error ,when we see using WE05 tcode or BD87 , pl sugggest how to rectify it to make the status 53

Hi,
Have you configured the partner profile details? check these steps..
1. In the receiver system you must configure the partner profile for your sender system in WE20.
2. Add the IDoc message type to inbound parameters of the partner profile and configure the appropriate process code.
2. Fill the Logical system name for your senderservice-->Adapter Specific identifiers in ID.
<a href="/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi File-to-IDOC Scenario</a> By Venugopalarao
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> By Ravikumar Allampalam
Regards
San

File to IDOC scenario : Error with mapping due to Context handling

Hi Experts.
I have a file to IDOC scenario which need your advice.
Source File structure as follows:
Control_Header <1:1>
Invoice_Header <1:unbounded)
Invoice_Line <1:unbounded)
Trailer <1:1>
Payload as follows capture from SXMB_MONI
- <Control_Header>
 <Key>999</Key>
 <TransactionID>RCTV</TransactionID>
</Control_Header>
- <Invoice_Header>
 <Key>000</Key>
 <BusinessUnit>HDB05</BusinessUnit>
 <InvoiceNo>64471</InvoiceNo>
</Invoice_Header>
- <Invoice_Line>
 <Key>001</Key>
 <UnitPrice>7.00000</UnitPrice>
 <Quantity>1.0000</Quantity>
 <GSTAmount>0.49</GSTAmount>
 <GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Invoice_Line>
 <Key>001</Key>
 <UnitPrice>8.00000</UnitPrice>
 <Quantity>1.0000</Quantity>
 <GSTAmount>0.56</GSTAmount>
 <GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Invoice_Header>
 <Key>000</Key>
 <BusinessUnit>HDB21</BusinessUnit>
 <InvoiceNo>6Y0575</InvoiceNo>
</Invoice_Header>
- <Invoice_Line>
 <Key>001</Key>
 <UnitPrice>49.50000</UnitPrice>
 <Quantity>1.0000</Quantity>
 <GSTAmount>3.47</GSTAmount>
 <GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Trailer>
 <Key>TRL</Key>
 <TransactionID>RCTV</TransactionID>
 <TotalFeedLine>96</TotalFeedLine>
 <HashTotalValue>212.00</HashTotalValue>
</Trailer>
</ns:MT_EINVOICE>
Mapping as follow:
 IDOC
<Control_Header> -> <Control_Header>
<Invoice_Header> --> <Header_Invoice>
<Invoice_Line> ---> removeContext --> <Line_Invoice> this is the child node of <Header_Invoice>
<Trailer> -
> <Trailer>
The result of the using the above Payload get the following result which not wht I seek
<Control_Header>
<Header_Invoice>
 <Line_Invoice>
 <Line_Invoice>
 <Line_Invoice> *** This belong to the Invoice_Line of the second <Header_Invoice> at the payload
<Header_Invoice>
 <Line_Invoice> *** THis segment is empty
<Trailer>
I required the Line_Invoice to belong to the child of the second <Header_Invoice>, I have tried using
removecontext with splitVaue and collaspeContext but to no avail.
May I know what is my mistake on the mapping of the Invoice_Line to Line_Invoice>
Rgds
FNG

Hello,
There should be something that could correlate the Invoice_Header/Key and Invoice_Line/Key. In your example, both are the same for the first and data set. If the sample looks like the one below, it is possible to sort things by correlating the Invoice_Header key and Invoice_Line key
<Invoice_Header>
<Key>000<Key>
</Invoice_Header>
<Invoice_Line>
<Key>000<Key>
</Invoice_Line>
<Invoice_Line>
<Key>000<Key>
</Invoice_Line>
<Invoice_Header>
<Key>001<Key>
</Invoice_Header>
<Invoice_Line>
<Key>001<Key>
</Invoice_Line>
An example mapping could look like this
For Header
Invoice_Header --> Header_Invoice
For Line
/InvoiceLine/Key --> removeContext --> splitByValue:valueChanged --> Invoice_Line
The subfields of the invoice line would also follow a similar logic, you just need to use formatByExample --> splitByValue:eachValue so that the context levels are the same.
Hope this helps,
Mark

File to IDOC, with External Definition to hold multiple IDocs

Hello Experts,
I am configuring a sample File to IDOC scenario. Here are the steps I am following, can you please guide me what I am missing here.
I am having a flat file with 10 records to be transferred to my ECC system through IDOC adapter to create 10 different IDocs.
1. I am picking up my flat file using a 3rd party Business System with File Content Conversion
2. I uploaded CREMAS Idoc and exported as XSD file and modified Occurences paramter to unbounded and uploaded back as an External file definition into IR
3. I defined an SAP WEBAS ABAP type Business System with LS (representing my ECC system) and configured with IDOC Rcvr channel.
4. In the IDOC recvr Channel, I specified RFC destination pointing to my ECC system & Port, Release...etc
5. On the ECC side, I configurated a PARTNER PROFILE with the above mentioned LS(used in step 3) and added an Inbound Idoc paramter CREMAS with process code CRE1. Selected the option Trigger Immediately.
Testing:
1. When I checked my CC monitoring in RWB, my file on the sourced is getting picked up successfull with respect to the specified polling intervals.
2. I don;t see any messages in my SXMB_MONI. I verified SXMB_ADM configuration it looks fine to me
3. I used TCode:WE02 on ECC side, nothing is there
4. I used Tcode SM58 on ECC side, nothign is there
I have no idea what is happening after successfully picking up the file on the source side.
Is there a way to trace where exactly the error is or what is wrong with my scenario?
Just an observation, We don;t need to specifiy any LS on the Sender Business Sytem(3rd party in my case) which picks up my file on the source side. Rather I am specifiying LS on the Target Business Sytem(type WEBAS ABAP in my case) to send my IDOC to ECC system. I am using the same LS to define PP on ECC system.
Edited by: Chris Rock on Oct 21, 2008 5:03 PM

Aamir,
I tried full cache refresh, also cleared SLD Cache for both IR & ID. No luck.
I think either some thing wrong in connection parameters, but atleast if I see some error in Moni or RWB, it helps, but in my situation, nothing is showing up there.
Connections:
I specified PORT & RFC Dest in IDOC RCVR Adapter along with WEBAS Release version. These PORT & RFCs are created in XI using SM59 & IDX1 and both passed the connection test.
On the ECC side, I created a PP with inbound Idoc CREMAS and process code as CRE1. This PP uses the LS that was used in RCVR BS specified in XI side.
I also loaded Idoc meta data into XI with Tcode: IDX2
Please help me, any body. I will sincerely award the points.

File to Idoc - Outbound Error

Hi,
I am doing File to IDOC scenario. I got error
in "Message has error status at outbound status" .. When
I opend that messeage then i got this ...
<SAP:IDOCTYP>ZIDOCIN</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>ZMTIDOCIN</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPX11</SAP:SNDPOR>
<SAP:SNDPRN>Logi_01</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPA11</SAP:RCVPOR>
<SAP:RCVPRN>A11CLNT200</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
Can any one tell me what to do to solve this.
thx,
Ansar.

Hi,
There is somethig worng with your Partner Function while defining the the Partner Profile, please check it. The Partner function is optionla and see if you need it
Go thru the link,
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Thanks,
Prakash
Thanks,
Prakash

File to idoc with BPM

Hi All,
I have one File to IDoc Scenario. Now I want to throw posting error in a file.
i.e., if mapping goes not well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a file(Flat file) will be created at sending system side.
I am planning to design this scenario with BPM. Now end user requires a akwoledgement for this scenario eithere it may be succsess or failure in file format. If succsess the file will be created with succsess information(any format), either failure also file will be created with error information. The user requires only file format b'coz this file will be read by another java application (user didn't require to his mail).
Can anybody suggest the solution for this:
1. How to generate aknowledgement file for sucsess or failure.
2. How to use this file to idoc scenario in BPM with out using Alert configuration or Mail adapter.
Regards,
Konala.

Hi,
As you know Idocs are used for asynch communication, only was to get acknowledgemnet is using ALEAUDIT. For your scenario there can be one work around. When you post IDoc in the, in that function module after the posting is done call one more RFC with the the success/failure message which will trigger RFC to File sceanrio.
If you get any other solution, please post it back to same thread.
Thanks,
Prateek

File to idoc - IDX5 Error

Hi,
I am doing file to idoc scenario. I have done all required configuration in IR and ID. This Scenario is now executing properly and in SXMB_Moni it is also showing new generated IDOC number.
But when I tried to locate same IDOC in R/3 system i am not able to locate it. In IDX5 tcode is showing error msg like "No authorization to send IDocs with message type ZTESTMSG".
Please guide me on this.
Thanks,
Sunil

Hi Sunil,
Please can you check the RFC in IDX1 (RFC destination given in PORT)which is used for sending the IDOC.
Does it have all the authorizations.
Also you can try this using xiappluser in the RFC destination.
Regards
Vijaya

Error when deploying EAR file: Operation failed with error: java:/app/jdbc/

I created application using JDeveloper 11g, and have the deploy file EAR read to deploy to oracle application server 10g, but I am encouting the error of Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Below is the log. What did i do wrong? I have created the datasource of HRConnDS, and it shows in EM.
Nov 6, 2009 10:06:12 AM] Application Deployer for hra1 STARTS.
[Nov 6, 2009 10:06:12 AM] Copy the archive to /u01/OraHome_app1/j2ee/home/applications/hra1.ear
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear begins...
[Nov 6, 2009 10:06:12 AM] Unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Done unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Done unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear ends...
[Nov 6, 2009 10:06:12 AM] Starting application : hra1
[Nov 6, 2009 10:06:12 AM] Initializing ClassLoader(s)
[Nov 6, 2009 10:06:12 AM] Initializing EJB container
[Nov 6, 2009 10:06:12 AM] Loading connector(s)
[Nov 6, 2009 10:06:12 AM] Starting up resource adapters
[Nov 6, 2009 10:06:12 AM] application : hra1 is in failed state
[Nov 6, 2009 10:06:12 AM] Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Thank you very much for your help.

How did you create your datasource, can you post the content, without passwords of course.
Greetings.

File 2 Idoc with Acknowledgement to Mailreceiver

HI,
i have a simple file to Idoc scenario.
A file is sent to Xi, mapped to an ORDERS Idoc and the IDoc creates an SalesOrder in the SAP R/3.
Is it possible to send an acknowledgement or something else back to a mail receiver ?
In case the SalesOrder is processed -> Mail to the filesender (Mailaddress) everything is fine.
In case the SalesOrder failed -> Mail to the filesender (Mailaddress) there is an error.
ideas ?

Hi Gordon,
When Idoc creates SalesOrder in SAP R/3 an acknoledgement Idoc is created in R/3 for corresponding SalesOrder.
You need to create a scenario in such a way that, when Ack Idoc will created in R/3 it will be picked up by Sender side Idoc Adapter and sent to XI from where you can configure Email Receiver and you can get Ack details through email.
Regards,
Shripad
**Reward points if it helps you**

File to Idoc with error in trfc

Similar Messages

Maybe you are looking for