File to proxy scenario

Dear one,
I need a solution for my problem facing this moment.
Here is the File to proxy scenario explained.
I created three new fields in XI IR to map three more fields from File to CRM .On this line,I created three fields in IR and passed the updated file(containing three new filelds) and interfaced.Before that I had regenarated and activated CRM level proxy too.
The file was red by XI and moved to CRM also.
Now my problem is that I can see the three new fields in SXMB_MONI when I got into detail of that . But when I debug the CRM proxy the value for these three fields are not displaying over there .
These three values are displayed in XML message but not in proxy ,why it is so?.
Please help me out to resolve the issue.
Swasthi,
Karthik

Hi Manjusha,
Here is the reply:
Is the issue with the fields , or the values in the fields ?
Ans:Issue is with the values ,not with the fields .
Is it that your proxy structure doesn't have the fields ?
Ans:Proxy structure have the fields but not value.
Can you check sxmb_moni in the CRM system if these fields with value appears.
Ans:I checked in the CRM system
<TOTL_INFO>
<DT_INVOICE>
<MT_Invoice>
<ECOMM_VAT_BASIS_AMT>12</ECOMM_VAT_BASIS_AMT>
<ECOMM_VAT_AMT>13</ECOMM_VAT_AMT>
<ECOMM_CURR_CODE>GBP</ECOMM_CURR_CODE>
</TOTL_INFO>
</DT_INVOICE>
</MT_Invoice>
Both field and values are coming perfectly in XML message..
You can see that above in last three fields (Field- ECOMM_VAT_BASIS_AMT , Value-12 and etc.).
Only values are not coming in proxy structure(table) ....fields are coming with no values
Pls let us know yr views.

Similar Messages

Error in FILE 2 Proxy Scenario

Hi All,
I am doing File to Proxy Scenario i am getting following error
Could any one provide the solution for this.
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>MI_Emp_Sender</SAP:P2>
<SAP:P3>Namespace</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message MI_Emp_Sender, request message, namespace )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks in Advance
Mahesh
</SAP:Error>
Edited by: Mahesh Reddy on Jul 10, 2008 12:47 PM

Hi Mahesh,
1) Use SPROXY transaction.
Menu-> Proxy -> Activate All.
2) check in the interface determination if u are using correct
inbound interface.
3) If this if fine....try deleting all proxy objects of the interface
and create new.
Regards,
Praveen K

File to Proxy Scenario : Error in communication channel monitoring

Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
Chandravadan

Hi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani

File to Proxy Scenario Query

Hi All,
I hav a file to proxy scenario. The XML file is sent as a proxy from XI to ECC. but ECC is receving it as a blank file.
SXMB_MONI in XI is success but in ECC it has failed. Please help us understand where the problem is occuring.
Regards,
Sudeep R

Hi,
Please check your sxmb_moni in ECC & XI, in both message, check the message data is same.
If you are receiving data on PI from file successfully, the problem can be in Mapping in PI, check that in PI. In this case data will not be sent to ECC System.
If you are receiving data on ECC from PI, now check the problem in Proxy code.
Check the steps for inbound proxy in the below blog :
/people/sandeep.kaushik/blog/2010/07/15/abap-proxy-complete-developments-on-sap-pi-sap-abap-systems

File to Proxy Scenario Error

Hi Experts,
I am working on File To Proxy Scenario. I am getting the below Error: The Messages in SXMB_MONI are going to AUtomatically Restart Status. I see some Queues with RETRY Status in SMQ2. When i am testing from SPROXY, the Table is Updated with the Corresponding Values. But when i place the file in the ftp folder then i am getting this error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please check and do the needful .
Regards,
GIRIDHAR

Hi Giridhar,
The problem is with connection. Please check the below discussion
HTTP returns status is 500(Internal Server Error)
Problem in ABAP proxy........ | SCN
regards,
Harish

File to Proxy scenario message failed in ECC with staus SYSFAIL

Hi All,
We are working on File to proxy scenario, PI able to send message successfully to ECC, but In ECC , message got stuck in queues with the status 'SYSFAIL',
when I read the error message it is showing Address Invalid.
when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
I'm using PI 7.1 EHP1 , ECC 6.0, can anyone suggest the trouble shooting guidelines for this issue?
Thanks,
Venu.

when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
in your code, there seems to be an invalid statement.
check the proxy code.

EOIO is not working for file- BPM- Proxy scenario.

Hi All,
I have one File to BPM (Merge pattern ) to Proxy scenario.
I have two file communication channel at the sender side and defined QOS as EOIO for both. In SXMB_MONI it assings same queue for all messages.
BPM is merging that messages. However during that it assings different queue for merged messages.
When it comes to proxy , again different queues are assingned to the messages.
Is there any way I can define QOS in BPM or at the proxy side ( I know it should be at the sender side only , but it's not working..)
Thanks & Regards,
Dijesh Tanna.

HI,
Within the current release the BPM will always only use EO (SAP Note 833740).
May be the SAP note 905049 will help you on this ...
Thanks
Swarup

File-xi-proxy scenario

Hi
In case of file-xi-proxy I have a business rek like
In the event of ABAP program fails to complete normally, a error should be logged.
A notification should be sent to production support. How to send the error which has occured in ABAP system to production support ??
Thanks
kumar

Hey
please have a look at the following
How to trigger alert in XI from a connected SAP R/3 4.7 system
Thanx
Aamir

File to Proxy Scenario using ABAP Class and DB Multi Connect

Hello Friends,
I have a scenario below and a proposed solution. I would like some input as to whether i am headed the right way.
Scenario: Thousands of records come in from the legacy accounting system. The fields of these records need to be mapped to SAP fields using cross-reference tables stored in DB2. Finally, summarize the records by deleting a few fields and feed to R/3.
Solution i proposed:
(1) File Adapter is used to send the file
(2) Although JDBC adapter comes first to mind but since i need to access the DB2 tables multiple times for each record i propose to use an ABAP class for the mapping. Within the ABAP class the intent is to open an database connection to DB2, read the relevant cross tables using native SQL and finally generate the output XML.
(3) Reciever is Proxy which feeds this generated XML to SAP for creating posting via BAPI_ACC_DOCUMENT_POST
Question: Is the above solution correct or is there a better method to implement this scenario?
Please let me know.
Thanks,
Minhaj.

Looks fine. Few observations -
1. Whether it is ABAP class or Mapping in RFC lookup, you are making multiple trips to the database.
2. It looks like PI is being used only for reading the file and converting it to XML.
3. If using PI is not mandatory, then a complete ABAP class on ECC it self would be faster than swtching between PI Java, PI ABAP then round trips to DB2 finally data push to ECC.
If you could look at something like fetching all the required RFC look up data in one go and then map the fields according, might save u on processor and network resources.
VJ

File to Proxy scenarios, varying Transport Protocol

I need to define a "normal" scenario which will pick up files from an external FTP location, and process them with a server proxy.
But there's the additional need to pick files from an arbitrary local file server in which some users could drop manually files they received by mail, which should be processed in the same way.
This forced me to define two communication channels, two sender agreements, etc, and dupplicate in general all the directory objects. The CCs vary in the protocol and directories properties, but the content conversion parameters are also dupplicated (Recordset, fieldNames, fieldSeparator and such).
I will have this same situation with at least 4 interfaces which leads to a lot of objects proliferation.
Is there any way to avoid this massive dupplication?
Many thanks!

Hi Alejandro -
your suggestion didn't apply because in this case we are talking about the same adapter but different protocol which requires two separate CCs
>>>No need to have two separate CC's when you go with execute OS commands option.
Only one channel which will pick the files from local file system. But before processing these you execute the OS commands to download the files from FTP server.
But of course, as you are comfortable with the the other suggestion, you can create the channels and sender agreements..

XML file to Proxy Scenario with BPM - ID Steps

Hi Guys,
Any one can help me to find about the scenario XML file to ABAP Proxy with BPM, ID steps please. Any link or logical routing, receiver determination and interface determination idea. Please correct me,
I have created Business Service as sender to send one xml file to BPM, BPM is sending a message to SNC system. I have created 2 receiver determinations, but I am confusing in interface determination, where to declare OM?
Please can any one respond bit quicker.
Thanks in advance
Regards
San

ES Repository
                     *Service Interfaces*
Create one outbound service interface for XML file.
Create one Inbound synchronous Interface for SNC system.
Create one Abstract Asynchronous interface ,same message type as you used for outbound service interface .This is for Integration process receive step.
Create one Abstract async interface for receiving the response from SNC system in Integration process.
Create one Abstract synchronous interface to be used in the Integration process for Send sync step.
Create on inbound asyn service interface for sending the response from integration process (received from SNC system) to the Receiver System.
              Operation Mapping.
Create an Operation Mapping using Abstract sync interface and inbound syn interfaces.
              Integration Process
start--->receive Step---->send Synchronous step----->send step.
Create two container elements
first with abstrat async interface for the XML request.
second for abstract asyn interface with the XML response structure (asyn receiver system structure)
In the send sync step select your abstract syn interface from the F4 help.and select the corresponding request and response message from the container element you defined earlier.
Integration Directory.
Create one sender File adapter Communication channel for XML file reading.
Create two receiver communication channel for sync system(receiver XI adapte for ABAP PROXY) and other for asyn receiver system .
Create 3 receiver determination
1.from sender to Integration process.
2.from Integration process to SNC system.
3. from Integration process to Asyn Receiver System.
Create 3 Interface determination.
Specify Operation mapping while you are creating interface determination from Integration Process to Syn BS.
Create one sender agreement
Create two Receiver agreement.
Regards
Kubra Fatima.

Combine 2 files as input for file to proxy scenario

Hello,
Is it possible to combine to files into 1 message ?
We've got 2 csv files (1 header and 1 item) and we would like to have this in 1 xi message, processed later by a proxy.
Any idea's how to do this ?
regards

Hi,
>>Never worked with BPM before, are you aware of an example somewhere that I can have a look at on the internet ?
need to search sdn.. if i find one i will paste it here
Update
http://wiki.sdn.sap.com/wiki/display/BPX/BPMPatternMultiIfconditionExplained%28stepbyStep+Procedure%29
/people/milan.thaker/blog/2008/07/23/correlation-150-runtime-behavior-of-bpm
>>what when there are several files currently waiting ? let's say 2 header files and 2 item files ? does the system know which one he has to combine ?
Say you have a file with header details for company A,B,C and another one for D,E,F... And you have two separate files for their Line items... so each Header (or line item) file will generate a instance of BPM and it will be complete for the other file to come and complete the fork step..
and here co-relation of the common field plays a role
Regards
Suraj

Anonymizer Bean is not working XML file -- ABAP Proxy scenario.

Hi Experts,
Can anybody please help, How can add this line <ns0:ROOT xmlns:ns0="urn:XXX:snc:productactivedata"> to my input xml file?
</ns0:ROOT> to the end of the input xml file. One more thing please, how to remove "standalone="yes" " from this line <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
I have tried with Anonymizer bean settings, I can't able to achieve this, with XSLT mapping could, but I don't know XSLT mapping, can any one help me in this?
Many Thanks
Regards
San

Hi Prateek,
If do, like remove namespace in the message type then i get this error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_EDI_ProAct_One_N_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
<SAP:P3>The element type "D01_PO4" must be terminated by t</SAP:P3>
<SAP:P4>he matching end-tag "</D01_PO4>".</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>com/sap/xi/tf/_MM_EDI_ProAct_One_N_com.sap.aii.utilxi.misc.api.BaseRuntimeException:The element type "D01_PO4" must be terminated by the matching end-tag "</D01_PO4>".</SAP:Stack>
I have checked the message, xml message format fine. Any help in this please?
Thanks & Regards
San

Doubt on server proxy and file to idoc scenario

Hi,
     I could able to solve most of my doubts from this forum, many regards to all who assisted me.Here are some simple doubts plz help me in solving them.
          1.In FILE to PROXY scenario is it necessary to create rfc destination on IS and receiver system? becoz in some blogs it is written to create RFC dest only in case of CLIENT PROXY,since we XI adapter to connect receiver syst in case of server proxy?
          2.In FILE to IDOC scen at receiver side is it necessary to formalities in SM59,WE21,WE20 or just configure in WE20 to maintain partner profile?
          3. In case of single SLD for DEV,CON,PROD while transferring from DEV TO CON using file system how do we move file in EXPORT DIRECTORY TO IMPORT DIRECTORY of cons system?
          4.for transporting IR objects we can use TRANSPORT LIST or CHANGE LIST which will be more preferable?
          Plz kindly answer to any of questions u know ?
          Points will be rewarded for valuable answers.
                                                                                Regards,
                                                                                Smitha.

> 1.In FILE to PROXY scenario is it necessary
> to create rfc destination on IS and receiver system?
> becoz in some blogs it is written to create RFC dest
> only in case of CLIENT PROXY,since we XI adapter to
> connect receiver syst in case of server proxy?
You need to maintain the setting on your R3 system to connect to XI for the Transaction SPROXY as shown in the blog "How to Activate ABAP Proxies".
Apart from that as you are doing a file to proxy via XI, XI would need to send data to the R3 system . For this, you can either key in the Details of the R3 system in the XI adapter directly or you can maintain a HTTP destination on your XI in SM59 and use this in the XI adaper.
> 2.In FILE to IDOC scen at receiver side is
> it necessary to formalities in SM59,WE21,WE20 or
> just configure in WE20 to maintain partner profile?
Just the partner porfile. SM 59 and We 21 are used for port and RFC destination and as it is XI that is posting the Idoc these steps are not needed on R3
> 3. In case of single SLD for DEV,CON,PROD
> while transferring from DEV TO CON using file system
> how do we move file in EXPORT DIRECTORY TO IMPORT
> DIRECTORY of cons system?
You have to go to the Folder Level / OS level of your XI server, copy the files from the Export DIrectory and move these manually to the import folder of the CONS server. This is for both IR and ID objects.
> 4.for transporting IR objects we can use
> TRANSPORT LIST or CHANGE LIST which will be more
> preferable?
If you perfrom File Transport, the imported objects will be available under the Import Change List and you need to activate this Import Change List.
Regards
Bhavesh

File Content Conversion Error in PI 7.1 (file to Proxy)

Hi
I am working on File to Proxy Scenario and I gave the File content conversion as below, File is picking up by the PI Server when I look at Communication Channel Monitoring, However when I open the Message ID in the CC monitoring it says as
404 Not Found
The requested resource does not exist.
and I do not see any message SXMB_MONI(Because the content is not converted), Can anyone give an idea how to debug this
Thanks
PR
Please find the details below which I gave in the content Conversion
Document Name : MT_TW_AK
Document NameSpace : http://aiwcd.com/Claims_Management(CM)_Rel2.0
RecordSet Name : FROISROIAcknowledgement
RecordSet Structure : Header,1,Record,*,Trailer,1
Recordset Sequence : Ascending
KeyField Name :TransactionSetID
Key Field Type : String (Case Sensitive)
IgnoreRecordsetName : true
Header.fieldNames :TransactionSetID,SenderID,ReceiverID,DateTransmissionsent,TimeTransmissionsent,OriginalTransmissionDate,OriginalTransmissionTime,TestProductionCode,InterchangeVersionID
Header.fieldFixedLengths: 3,25,25,8,6,8,6,1,5
Header.keyFieldValue : H
Record.fieldSeparator :
Record.fieldNames : TransactionSetID,RecordSequenceNumber,DateProcessed,TimeProcessed,InsurerFEIN,ClaimAdministratorPostalCode,ClaimAdministratorFein,AcknowledgementTransactionSetID,ApplicationAcknowledgmentCode,InsuredReportNumber,ClaimAdministratorClaimNumber,JuridictionClaimNumber,MaintenanceTypeCode,MaintenanceTypeCodeDate,RequestCode,FreeFormText,NumberofErrors,MaintenanceTypeCorrectionCode,MaintenanceTypeCorrectionCodeDate,JurisdictionBranchOfficeCode,ClaimAdministratorAlternatePostalCode,NumOfErrors
Record.fieldFixedLengths: 3,9,8,6,9,9,9,3,2,25,25,25,2,8,3,60,2,2,8,2,9,19
Record.keyFieldValue : A
Trailer.fieldNames:TransactionSetID,DetailRecordCount,TransactionCount
Trailer.fieldFixedLengths: 3,9,9
Trailer.keyFieldValue : T
ignoreRecordsetName: true

PR,
Can you check the error in sender communication channel?
Go to RWB ---> Component Monitoring ---> Adapter Engine ---> Communication cahnnel monitoring --> it displays new page. Then give your file sender communication cahnnel name. There you will definitely see some error.
The error what you are getting is a different to this one. Can you please check the error what I have given above path.
Regards,
---Satish

File to proxy scenario

Similar Messages

Maybe you are looking for