File transfer between macbook and other macs

I need to do a file transfer between my macbook and a macbook pro and my macbook and an ibook. What ways can you recommend? FTP is slow for me because it's a campus network, and bluetooth takes a while too (in the ranges of 1 to 2 hours). I believe it can be done through firewire and/or USB right?
If I were to use USb, is there any special software needed? Or will each mac detect each other as a hard drive or?
What about firewire? I understand it needs to have a hub or a server? Is that true? Can file transfers be done just via a firewire alone?
Thanks!

If you want to access your friend's files, he should enable File Sharing on his machine and you should choose Finder > Go > Connect to Server... His machine should show up in the Connect to Server dialog box. This should work with ethernet; AFAIK USB will not work.
From Mac Help:
"You can use an Ethernet cable to connect two Macintosh computers and share files or play network games.
1. Connect an Ethernet cable from the Ethernet port of one computer to the Ethernet port on the other.
2. Open Sharing preferences on both computers and turn on Personal File Sharing. Note the Computer Name for the computers.
3. On one of the computers, choose Go > Connect To Server and then click Browse.
4. Double-click the other computer in the window and enter your password, if necessary.
If you manually configured the TCP/IP settings for the built-in Ethernet configuration on the computer you are connecting to, you may need to enter that computer's TCP/IP address in the Connect To Server dialog.
To see or set the TCP/IP address, open Network preferences and choose your Ethernet port configuration from the Show pop-up menu (named Built-in Ethernet unless you gave it another name)."

Similar Messages

  • Why have apple disabled file transfer between iphone and other devices?

    I have recently purchased an iPhone and i was about to send a file from my iPhone to a friends android and i found that it wasnt possible. Does anyone know why apple have not allowed this feature on any of the iPhones?

    I venture to say security is the primary reason.
    http://macdailynews.com/2011/08/24/apples-ios-unaffected-by-malware-as-android-e xploits-surge-76/

  • Any issues with file sharing between Windows and latest Mac client?

    We're running Lync 2013. My Windows client is 15.0.4551.1005. Mac client is version 14.0.8.
    I open a conversation with a coworker on his Mac. I then try to share a png file. He clicks accept but then my client says the attempt timed out, and his client says that I canceled the file transfer. The coworker then boots the Mac into Windows and we try
    again, and the file share works fine. When I jump on my Mac, I can send files to his Mac without issue. When he tries to send from his Mac to my PC it fails, but when he tries to send from Windows on his Mac to my PC, it works.
    I can't find anything specific in the logs that would indicate a firewall issue. Is there a bug with file sharing between the Mac and PC clients?
    Thanks,
    Matt

    No, There isn't a bug with file sharing between Mac and Pc client.
    2941640 Desktop sharing session stops in Lync 2013 when all screen data is updated
    Also you can check below links
    http://support.microsoft.com/kb/2952672/en-us
    http://support.microsoft.com/kb/2880474/en-gb
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • File sharing between Macbook and iPhone 5s? AirDrop or bluetooth

    Just purchased my first Macbook ever! I'm catching on quickly however I've run into a snag with file sharing between my other Apple devices.
    How can I pair and send files between my MBA and iPhone 5s?
    I've made the change in system preferences to allow file sharing, yet still pops up on my iPhone that my MBA doesn't support this.
    Also I've enabled Airdrop on both devices yet I can't seem to get that to work as well. Any help or advice would be appreciated. I would love to be able to easily send pictures or documents from my MBA to my iPhone 5s via Airdrop and vice versa.
    Thanks in advance

    Regarding AirDrop, note the quotation below from: iOS: Use AirDrop to wirelessly share content
    You can't use AirDrop on iOS to share with OS X users, and OS X users can't use AirDrop to share with iOS devices.
    The iPhone has limited bluetooth profiles and the only supportde connection between an iPhone and a computer is for tethering (sharing the iPhones cellular data connection). iOS: Supported Bluetooth profiles

  • File transfer between IMAC and Motorola RAZR V3c

    I recently replaced my defective Verizon RAZR phone with a new RAZR v3c. Previously, I was able to exchange music, video and pic files readily by dragging and dropping via bluetooth. The new phone pairs up w/ bluetooth but an error message appears stating the device "does not have the necessary services". Is there a way to transfer these files even w/o bluetooth if necessary? I've been reading for hours and haven't found a solution. Please HELP!! Thanks

    Bad news... Verizon disabled that "feature" of your phone. I guess they did it to try to force subscribers to buy more ringtones and use more data transfers. It might depend on the exact firmware version. There's some info on it here:
    http://blog.wired.com/music/2006/07/verizonrazrca.html
    And a (somewhat daunting) wiki tutorial on how to replace the Verizon $oftware with the original phone software from Alltel:
    http://wiki.howardforums.com/index.php/MotorolaV3c_Tutorial:_Flashing_to_Alltel_UserInterface
    Oh wait, just found this... apparently you can take it to a Verizon store and have them update the firmware:
    http://www.gizmodo.com/gadgets/cellphones/verizon-finally-enables-file-transfer- bluetooth-on-motorola-razr-v3c-168533.php

  • HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    Try this article - http://support.apple.com/kb/HT4889.
    If it doesn't help, post back in this thread.
    Best of luck,
    Clinton

  • How is it best to keep files synced between iMac and Macbook?  I work from home on my iMac and then out in meetings on my Macbook and need to have access to the same files on both.

    How is it best to keep files synced between iMac and Macbook?  I work from home on my iMac and then out in meetings on my Macbook and need to have access to the same files on both.  The folders are using Microsoft programmes as this is compatiable with 90% of my colleagues, therefore I can't use the Icloud service.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • Transfer iPhoto between Macbook and iMac

    I just managed to transfer my iPhoto contents from MacBook to iMac and thought I would share this.
    I needed to do this because my Macbook hard drive is full and I have plenty of space on my iMac.
    Connect MacBook and iMac with Ethernet network cable (I found this the fastest way but you may connect via your home network wifi connection as well)
    In MacBook, Open Finder and on the left pane under Shared, click on your iMac.
    show items as Columns by clicking on third icon on the top pane.
    Make a folder somewhere on your iMac by right clicking on white space. (I made a folder under Pictures)
    Click on this new folder (which should be second column in the view) and third column will be empty as there are no items in this new folder.
    In MacBook, Open iPhoto application, on the left pane click on Photos which will show all your photos in the view.
    Now adjust the size of this iPhoto window and above Finder window so you can see them next to each other.
    To test, just drag one or two photos from iPhoto window to Finder window in the third column (which is empty as there are no items in this new folder)
    If successful, drag other Photos or Videos as required and test by opening this new folder on your iMac. that's it. hope this helps.

    I'm afraid your explanation of what you've done is not clear.
    Did you copy the Library from one machine to the other?
    or
    Did you back up the Library to another Library?
    The distinction is important:
    In your title you ask about
    synchronize iphoto between MacBook and iMac...
    If you mean one direction copying - that is, backing up Library A to Library B, then you'll have no problems.
    However, if you try +bi-directional copying+ - that is changes in Library A reflected in Library B and changes in Library B also reflected in Library B you will corrupt one or both Libraries. No syncing software can parse the Library database to do bi-directional copying.
    Is there something not working if you have the iPhoto library stored as a folder instead of a package?
    No.
    Isn't it easier to have the iPhoto library as a folder instead of a package to synchronize it with another Mac using rsync?
    iPhoto is a consumer application designed to be manipulated in the GUI.
    Since iPhoto 7 (iLife 08) the old iPhoto Library Folder is a Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
    So, by running it as a Folder you facilitate this.
    Regards
    TD

  • When I try to drag and drop my photos in iPhoto to an external drive (for backup or to transfer them to my other Mac) only some will transfer.  If I copy

    When I try to drag and drop my photos in iPhoto to an external drive (for backup or to transfer them to my other Mac) only some will transfer.  If I copy and paste, the same thing happens.  The photos are all taken with the same camera, but some will not transfer.  It tells me right away - for example, I'll "grab" 3500 photos to drag and move, and the red ball will tell me it's moving 3256 or something.  If I use the copy function instead - copy 3500 photos, it will show in Finder that I can paste 3256 or whatever. This happens on my iMac as well as my MacBook Pro.  It started recently and I've never had this before.  Any thoughts?  Thank you!

    Are you able to use the File ➙ Export ➙ File Export menu to export  the photos into a folder on the EHD?
    OT

  • Problem conecting  and  file-sharing between two net-worked macs

    I have a Mac Pro (in an out-building in my back-garden) and an Imac (in the house) connected by a long ethernet cable (must be at least 20 metres).
    I used to have no trouble connecting one to the other till recently. I still usually have no trouble connecting to the Internet from the Mac Pro using the Imac's internet connection (wireless). The problem is in clicking on the Imac connection to open it in order to share files (also using "connect to server" in Go menu).
    Much of the time (but not absolutely always), it refuses to connect, and I get a "failed connection message" (or something like "server does not exist" if using other method).
    Sometimes, I can connect successfully, not just as a guest but after entering admin password, and then short time later the connection will disappear. When this happens, the Imac icon previously visible in the finder window also disappears. Unplugging and replugging the ethernet cable has no effect. Once I was using Itunes shared library to play a song on the Imac, and the song just suddenly disappeared.
    Just now, after the Mac Pro-to-Imac conection failed again, I substituted my Ibook for the Imac in the house, and there was no problem at all connecting both ways between it and the Mac Pro. I then reconnected the Imac to the Mac Pro and it too connected fine. This proved at least that the ethernet cable was not at fault, but no doubt the problem will re-occur.
    I have tried experimenting with the Firewall settings on the Imac, e.g. to "allow all incoming connections" or to "set access for specific services"( the latter is my usual setting on the Imac), but it made no difference. Also, the Ibook has no trouble at all connecting to the Imac when the Imac firewall is set to "specific services" so why should the Mac Pro have a problem (I admit I am a little uncertain about the best setting for the Firewall, but believe "specific services" to be correct).
    File-sharing options in system prefs on the Imac are clearly properly set-up or there would never be any connection at all.
    Often, although the Mac Pro to Imac connection will not work, the Imac to Mac Pro will, although not today, when the Mac Pro icon similarly was not present on the Imac.
    As stated, I am pretty sure that all the time the internet connection from Mac Pro to Imac still works (Mac Pro shares Imac conection).
    None of this appears to make much sense and am wondering if anyone has advice.

    Hi,
    It might be me but I don't think I have fully understood the "My Name's iMac" bit.
    If you mean (my Name) iMac as opposed to (My Name) iBook or Shed computer then that is a separate issue I will describe below
    Does the "My Name" bit mean like mine does in this pic ?
    As you can see I have used the Edit Button to change the Name of this G4 to RalphG4
    In System Preferences > Network > (Connection method) > Advanced Button > WINS tab I see this on my G4
    I have in fact used the same "Computer name" here (As in RalphG4)
    My MacBook Pro has had the Netbois Name changed to Macbook Pro
    It shows in the G4 Shares as that.
    The Finder's Preferences are set to Display the Bonjour and SMB shares that I can see as I have a Mixed PC and Mac Network here
    (Currently only the MacBook Pro is On as well)
    SMB Shares are not on in the MacBook Pro settings so it shows as a Mac Server (Highlight and do a Get Info)
    Two Computers with Same Name
    In Bonjour when two computers end up with the same name (As my two did originally) these double name issue cannot be resolved and the computer may be "Seen" briefly before it then disappears
    I have not tried it with SMB shares on my two Macs having had issues with Bonjour.
    (Note: iChat goes one step further.
    Even if the computer names are different iChat uses the Name in the My Card spot in the Address Book to show as the Buddy Name in the Bonjour Buddy List.
    It cannot resolve this if both computers are logged in as the same Person.)
    Another reason why a computer may show up twice is how it or they are connected.
    Lets say that all are connected to a router either by Wifi or Ethernet.
    They will be then seen once.
    If one computer is connected by Ethernet and Wifi at the same time then it will be shown twice as each appearance is linked to the Media Access Card it is using and the IP it uses for each connection.
    This can also happen if one is linked directly to another with an Ethernet connection or Wifi whilst doing the other to the router.
    Back to the naming thing again.
    It is better to use the Edit Button (Arrowed in Blue above) (.Local Name) rather than trying to change the computer's Name (Ralph Johns's Computer) as this is less reliable in later versions of the OS.
    8:52 PM Sunday; August 29, 2010

  • Secure the file/data transfer between XI and any third-party system

    Hi All,,
    I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
    with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
    If any one have idea pls let me know weather it will work or not.
    Thanks in adavance.
    Venkat

    Hi,
    Thanks for your reply.
    I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
    But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
    Thanks,
    Venkat

  • Can't sync files on Cloud Drive between Macbook and iPad after Yosemite and IOS 8.02

    can't sync files on Cloud Drive between Macbook and iPad after Yosemite and IOS 8.02
    Pages, Numbers and more won't sync.

    Er OK efter opdatering til IOS 8.1
    Til gengæld er Photo funktionen (synkronisering) blevet dårligere (for dårligt)

  • File compatibility between CS 5.5 MAC and CS 5.5 PC?

    We are currently a PC based shop with a few MAC's tossed here and there.  I have been asked to verify the file compatibility between CS 5.5 MAC and CS 5.5 PC.  Are the files fully compatible?  i.e. can user A on a PC create an illustrator/photoshop/etc document which is then opened by user B on a MAC with no issues?
    Thanks!

    Yes. For the programs you mentioned it has been forever this way and even for programs like Premiere Pro or Encore, that were platform-specific until recently, this is no longer an issue ever since CS5. Of course you will still have to take care of different handling for file paths on different platforms for externally linked files, but that's a different matter and nothing specific to Adobe...
    Mylenium

  • Transfer between iPod and iTunes - mission impossible !

    I recently got iPod Touch (latest model with latest iOS) - just to use it in my car. I simply wanted to add and remove few songs. In a normal world, there would be just 2 columns (ipod/computer and simple managing both parts within files and folders management - let us be sincere, can anything be more natural and straightforward ? Sure not). But Apple wants it to make super complicated and highly frustrating. OK, what to do,
    Since I already have a different computer (newer version of MBP Retina, with the latest OSX) , I needed to get the iPod content to the iTunes on the new computer somehow. This is impossible as such - since iTunes keep telling that if I want to associate this iPod with this iTunes library , I have to erase the iPod (this is something I really don't want). I try "full backup" - as offered by iTunes ... I do it few times, the process starts, but always lasts quite short (considering 1700 songs with 24 GB on my iPod). The result is - nothing is backuped to this computer ... very nice ...
    In further search, I discover some third party apps, that supposedly could help with this terrible process. I bought AnyTrans and started transferring the content to iTunes. in 9 hours, it was just 4 GB transferred ... (overnight) ... obviously not the way ... On another advice , I bought iExplorer, it should be supposedly better. I tried to transfer the iPod content to iTunes ("start automatic transfer). I tried it 5 times. As a result, the app always froze and for quit was the only solution. NIce. Then I got an advice that it is good not to transfer to iTunes but just to some folder on a computer. That finally worked. Good
    Then I added all these songs to iTunes Library (finally some first result after many hours of effort). Then I agreed that this iPod can be associated with this iTunes Library (that already contained those 1700 songs) and let it synced with this iPod.  After some time the iPod was indeed erased. No music in it any more. As much as I tried again and again to sync it with iTunes Library, the process went in three short steps and finished. The result - no music on iPod, whatever I do ... Full music Library in iTunes on MBP
    What shall I say and still keep my expressions decent ? (difficult) This iTunes and this system of working with files on iPod or iPhones is for me the most stupid invention ever. How could someone ever create such a terrible nonsense that make simple things impossible and highly frustrating ? Instead of simple file transfer between devices ... I have no words for that ... It is also possible that it is me who is stupid, in that case, please let me know how can I transfer songs from iPod to iTunes and how can I how some songs on iPod (that are already in iTunes Library). Not to waste computer space by having iPod library copied there, is another thing, but let us not go to details now

    Yes, all played in iTunes in the computer, right boxes checked (see the printscreens) ...  In the end , I restored to restarting iPod and MBP. After that it started working (synchronisation). But only up to some extent. In iTunes Library I have about 1700 tracks, but only 660 were transferred to iPod. Now I made: "add to library" - adding to library all the song I already have in Library: and the iTunes started working hard to add the rest in the Library (but they were already there ...)
    So finally I spend nice whole day to add/remove songs in my iPod ... 
    Another thing is - when in iTunes Library I want to add/change genre to some songs, the process takes so long, it is like each song is freshly copied just to add the tag "classical" etc to each ... I thought I have the "fastest Mac ever" ... Waiting so long for such trivial process is unbelievable ... (with rainbow circle making a nice decoration now and then)

  • File transfer between internal drives extremely slow

    Since the upgrade to the latest Lion OSX 10.8.5 on my Mac Pro, file transfer between internal drives is extremely slow. I used Disk Ulitly to repair the drives but no use. What could be the cause? Thanks

    Yes I have been transfering the same type of data in the same manner as before, this happened only recently. For example if I transfered lets say a 100MB single file from main HDD to 2nd internal HDD it would have taken around 10 seconds nwo it takes a minute or so. Also my iTunes library is located in the 2nd Drive and since this issue when I play music it keeps cutting off and coming back, I am sure this is due to the slow transfer speed of the drive. I can't figure out why it has gotten so slow, is it the drive or the OSX?

Maybe you are looking for

  • DOWNLOADED SOUND CLIPS FROM MY LG PHONE, THEY WON'T PLAY

    I DOWNLOADED SOUND CLIPS FROM MY LG PHONE. THEY HAVE A .qcp AT THE END. WHAT APPLICATION DO I USE TO PLAY THEM ? DO THEY NEED TO BE CONVERTED TO SOMETHING ELSE?

  • Migrating Exchange 2013 public mailboxes to a new server

    We have a client that is leaving their current Hosting company and wants to move to our hosting facility. We have recreated their DC,an Exchange Hub, and Exchange Store. We have exported and imported all of their recipient mailboxes and flipped the s

  • "Multiple Reports per Retrieval not Supported" Error

    I would like to create multiple reports on a single tab and refresh the data with one action. Is there a way I can set up the cube to enable this or am I stuck writing macros?Thnx

  • Position of cursor in ALV using oops

    Hi all, i am using OOPS ALV (CL_GUI_ALV_GRID) to display data. i have some editable fields in ALV. While i enter value in some field and press 'ENTER' my cursor goes to the FIRST field of the alv. i want it to keep cursor in same field. please tell m

  • WSPUBLISH not working after patching Discovery V2 system to SPS 15

    All, We have a eSOA Discovery (V2) system that we recently patched to SPS 15.  As you all probably know with SPS 14 SAP deployed a new SOAP runtime engine and obsoleted the use of WSCONFIG. I have followed all the installation, post installation, and