File Transfer Error Between Ichat 2.1 and Ichat 3

I am trying to send my brother some files. He has an Ibook G4 and so do I. He is running Ichat 3 on Tiger and I am running Ichat 2.1. Both of us are using a wireless connection through our own personal cable modems. He can send me files and I can accept them and get them without problems. Every time I try to send him a file, before it starts, we get an error 'File Transfer Error' file name not transferred.
He says he has no problems receiving files from other buddies of all different types of operating systems.
I don't recall having any problems sending or receiving from any of my other buddies either.
Is this just an OS X.3 vs OS X.4 issue? Or is there something weird with my Ibook?
Has anyone else had this problem? Thanks,
-Chris
IBook G4 1 Ghz   Mac OS X (10.3.9)   640 MB RAM

Hi cjmagnuss,
Can your brother send files to other people.
It sounds like it might be his end.
File Transfers happen on Port 5190 on the UDP protocol.
Some modems and router have problems if they have to list Protocols when Port Forwading.
Is this the case for him ?
10:00 AM Tuesday; February 21, 2006
iChat Resouce Web pages

Similar Messages

  • File transfer errors between WP8.1 and W8.1

    This is probably in the wrong forum. But I cannot find anything which this falls under.
    Also please forgive my lack of competence in filing an issue like this.
    I own a Lumia 1020 and was trying to move photos off my phone to laptop. More specifically was trying to move the DNGs. I had already moved the jpegs. When it came to cutting or copying the DNGs I keep getting an unknown error saying that the operation would
    not work. (sorry I don't have a screenshot of the prompt)
    Now, I decided to restart my phone and lo and behold that batch of DNGs are now lost. Which I must say is quite a bad thing given that those photos were rather important.
    Since that cannot be undone, I decided to move the other DNGs which to my surprise actually did start the transfer process without any hiccup. But, when my phone went to sleep it seemed to sever the connection between my laptop and phone thus killing the
    file transfer process and generally 'unplugging' itself from my laptop until I unlocked it again.
    Again I'm not sure how to submit this or under what category it falls. But this is an issue which shouldn't be happening with the finalised version of WP8.1

    Hello,
    You could also ask in the
    Windows 8.1 forum on Microsoft Community.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Best way to transfer data between iMac early 2006 and iMac late 2012

    What is the best way to transfer data between iMac early 2006 and iMac late 2012?

    HI, is this for Migrating all data ove, or just File Sharing?
    What OSX version is in he older one?
    Do you have any backup external drive for the older one?

  • File Transfer Error / Checked out access

    I am getting a file transfer error when trying to upload a revised file to the Remote Server. I think it may be related to the file being checked out by another team member who no longer has access to Dreamweaver. How can this be resolved? This is on a PC - I have CS6, the team member was using CS4.

    See if this helps
    Dreamweaver Help | Checking in and checking out files
    May not work, but did you try renaming or deleting the locked file?
    Can you log in as the other fomer team member?

  • CreatePDF printer    File shows ERROR in the status column and will not upload to my account

    When printing to the CreatePDF printer.  the file shows ERROR in the status column and will not upload to my account

    Adobe retired this Feb 17, 2014.
    This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
    These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account.  The user forum for CreatePDF has a DOC that speaks to the app removal.
    Be well...

  • Remote Execute and File Transfer Error

    Whenever we try to do a Remote Execute of File Transfer, we get an 1899
    error. Here's the strange thing, we can RE and FT to desktops that are
    still running the ZfD 4.x client. Seems to be only happening on the latest
    (ZfD 6.5sp2). Any ideas? Also, remote control and remote view still work
    w/o problem.

    Blewis,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • File transfer problem between Host OS and Guest OS

    Hi,
    I have WIndows7 32 bit as a host OS in C drive. and i have installed the Virtualbox in D drive and installed CentOS 6 in virtual box as a guest OS.
    After installing the Guest Additions in CentOS and set the Drg n Drop-Bidirectional. it permits to create shared folder in CentOS but i am not able to drag n drop to any file from host to guest and vice versa.
    Also when i plug the pendrive it copy the partially data in guest OS then it show unpluggeed automatically in guest OS. It copy only .rpm file in guest OS (CentOS)
    please suggest how to copy the file from Host OS to guest OS and vice versa.
    I have installed VirtualBox-4.3.20-96997. i have installed also Oracle_VM_VirtualBox_Extension_Pack-4.3.20-96996.vbox-extpack on windows ( on host OS).
    Thanks.

    The following is from the virtualbox user manual:
    Drag’n’Drop This setting allows to enable Drag and Drop: Select a file on the desktop, click the left mouse button, move the mouse to the VM window and release the mouse button. The file is copied from the host to the guest. This feature is currently only implemented for Linux guests and only for copying files from the host to the guest.
    I guess that explains your experience with Drag'n Drop.
    Regarding USB and the pen drive, you cannot access a USB device in the host and guest OS at the same time. The technology does not support this. You will either have to capture the device to be used/mounted in the host or guest OS. Unless you configure the USB device in the virtual machine settings, the device will normally be captured by the host OS and become inaccessible by the guest OS.
    To copy files between Windows and a VirtualBox Linux guest you can use Putty and it's pscp.exe to copy files from Windows to Linux and vise versa. You may have o enable SSH on your Linux side. There was a post here yesterday, please check the last forum discussions. Alternatively you can also use WinSCP if you want a GUI tool.

  • File transfer error 36

    Trying to transfer files between iMac and iPod classic 60GB (model circa 2005).  The file transfer process begins without problem until I get the following error for a file.  When I open the source document(s) they display just fine.  
    In researching this issue, I disk repaired both the iPod (no errors), and the iMac (error found and repaired).  Still no joy in transferring files. 
    Another issue is that if I remove the 'corrupt' file it is necessary to start the file transfer process from scratch . . . until the next 'corrupt' file hits.  Any way to have the system not transfer the 'corrupt' files and have them listed in a transfer log so I can manually tinker with them since they do open and display properly on my iMac.
    Appreciate any help with this issue.
    ERROR MESSAGE:
    The finder cannot complete the operation because some data in "<file name> could not be read or written. (Error Code - 36).

    http://osxdaily.com/2015/02/21/fix-error-code-36-finder-mac-os-x/

  • Please rank in terms of file transfer speed between FW800 external HDs

    Hello,
    I have two triple interface (FW400/FW800/USB2) 1000GB external hard drives. My 17inch Macbook Pro has 1xFW800 and 1xFW400. Please rank the following in terms of speed of transferring files directly between the external hard discs:
    1. Connect one to FW400 and one to FW800.
    2. Daisy chain FW800.
    3. Buy a 2 slot FW800 express card and connect both via this card.
    4. Buy a 2 slot FW800 express card and connect one drive to this card and the other to the inbuilt FW800 port on the Macbook Pro.
    Thank you very much for your replies,
    Ben

    For things like file transfer with large files, the internal drive will be noticeably faster, because it is a single continuous action.
    For booting and running a computer, there are many things happening at once, and disk access speed is only a small part of the overall process. Other factors related to the current status of the drives, such as amount of free space and fragmentation of system-related files will have an effect as well. If you perform a brand new system installation on a newly erased external drive, the system's files will be optimally placed with plenty of free space. Compare that to your internal drive, with the existing system's files somewhat more scattered over the drive (happens over time) and less contiguous free space (happens with ongoing adding and deleting of files)... The external drive may actually run faster.
    I have Mac OS X systems on external FireWire (400) and USB 2.0 drives. The internal drive feels a bit faster, but it is not something that is too noticeable. The ideal setup to optimize disk access speed is a limited size internal drive volume (it can be a partition) with the OS and apps installed. This volume should be devoted mostly to the OS and apps and have a decent amount of free space. If the drive is partitioned, use the first partition. Your personal data is then stored mostly on your the other partition (if the internal drive is partitioned) or an external drive. This keeps the OS and application files confined in one fast portion of the drive, and reduces ongoing fragmentation of files and free space, because OS and app files do not change very often, compared to user data files.
    However, for most users, the benefit gained is not enough to justify the added effort and complexity. One drive with everything bunched together is simple and easy, and works fine.

  • File Transfer Error

    Whenever we try to use File Transfer, we get the following error message:
    1899. The connection with the Remote Management Agent is terminated.
    File Transfer used to work just fine. Any ideas on why it broke and how to
    fix it?
    Thanks!

    Blewis,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • File Transfer error - stops at 26280 bytes.

    I am trying to make a little file transfer utility, and it works when I test the client and server sides on the same machine, but when I began to test the client and server on different machines it starts giving me problems. For files under 26280 bytes the file transfers completely, no problems. But for anything over that amount, the server stops the transfer and returns a bunch of errors on the server side. The client thinks the file is complete and quits. I am pretty sure it has something to do with the way I have set up the Streams. Here is the code snippit:
    For Server:
    OutputStream os = socket.getOutputStream();
         BufferedOutputStream bos = new BufferedOutputStream(os);
    File nFile = filename;
    long long_size = nFile.length();
    int size = (int)long_size;
    byte[] buffer = new byte[size];
    FileInputStream fis = new FileInputStream(nFile);
    DataInputStream dis = new DataInputStream(inStream);
    while(fis.read(buffer)!=-1){
    bos.write(buffer);
    bos.flush();
    For Client:
    InputStream is = sock.getInputStream();
    BufferedInputStream bis = new BufferedInputStream(is);
    FileOutputStream fos = new FileOutputStream(file);
    BufferedOutputStream bosfile = new BufferedOutputStream(fos);
    while(true) {
    size = bis.available();
    if(size == 0)
    break;
    byte[] pOutput2 = new byte[size];
    rc=bis.read(pOutput2, 0, size);
    if(rc == -1)
    break;
    bosfile.write(pOutput2);
    if(rc < size)
    count +=rc;
    break;
    else
    count +=size;
    Any help would be much appreciated. Thank you very much

    Doubtful code:
    size = bis.available();
    if(size == 0)
    break;
    You have a buffered input stream hanging on a socket input stream. So what if the client gets ahead of the server? Answer: for a while, there is no data available.

  • RFC connection error between BW 3.5 and ECC 6.0

    Hi gurus,
    We've defined an RFC destination between BW 3.5 and ECC 6.0. Connection test  (SM59) is ok, but authorization one fails and ALEREMOTE users block. These users on both systems have good profiles. We look ST22 and find a runtime error on CALL_FUNCTION_REMOTE_ERROR. We've cleaned source system on BW and RFC destination and we've created one more time, but error doesn't disappear. We've looked OSS but don't find anything.
    Any idea? Is there any other place (users, RFC) where we have to change user password on system?
    Thanks a lot!
    Regards,
    Iván.
    Edited by: Iván Cabezas Castillo on Nov 6, 2009 12:09 PM

    Solved!
    This is because of the incompatibility of password handling between
    640 and 700 systems.
    We have to use a maximum 8 character long password with only capital letters (numbers are also allowed) for the user "ALEREMOTE".
    1. Change the password for the user in SAP R/3.
    2. Maintain the password in SAP BW for the RFC destination (transaction SM59 - Logon/Security tab)
    3. Authorization test is now successful.
    (SM59 - Test - Authorization).
    Regards!

  • Errors between Mail 5 inbox and Server inbox on the Exchange Server

    Hi,
    I upgraded to Lion recently and it seems that the Mail application struggles with the Exchange interface (although it was already the case for Snow Leopard).
    Bottom line there are some email messages in my Mail inbox, which in principle mirrors the inbox on the Exchange server, which are not on the server anymore but still appears in the Inbox. The main problems is if I want to delete such message, I get an error message saying the the "message can nto be moved to Trash". Logically, since it is not on the server it is by extension not in the inbox, but it seems that a duplicate of messages gets stuck in the Mail application. Problem is that now they can;t be moved.
    I restarted the application to restart the synchornisation, and still messages appears on my Mac but do not exists even on the server.
    Has anyone has tips on how to get rid of these emails?
    Thanks in advance

    Hello Nirav,
    -> This question has to be posted at MAXDB/liveCache forum &
         I saw that you already created the thread for the correct forum::
          Re: Problem in connection between SCM 5.0 and LiveCache(Both on different H
    -> As SAP customer you have option to create the SAP ticket,
         we could logon to your system , check the issue & help you with
         the solution.
    Thank you and best regards, Natalia Khlopina

  • Connection Errors between Oracle 8 Client and Oracle 8.1.6 EE

    Our current application has been developed using PowerBuilder 6.5 and Oracle 8.1.5. Since PB 6.5 does not have a "native driver" for 8.1.5, we have used their driver for Oracle 8.0.5 for Net8 connectivity to the server. Everything works fine.
    Recently, I downloaded the current version of Oracle 8.1.6 EE from Technet to try out the compatibilty of our software with the next version of 8I, it failed. The error seems to be somewhere between the 8.0.5 Oracle Client Software and the downloaded Oracle 8.1.6 EE Server software. Some how we have lost the ability to declare cursors. I tried declaring a cursor in a procedure through SQL*Plus and it failed their as well. I have even tried the Oracle 8.0.6 Client, with same results.
    Has anyone seen this? If so, what should I do?
    Thanks,
    Jason

    HOW TO SUPPORT TWO-TASK COMMON ERRORS - 1012295.102
    Troubleshooting
    ===============
    Two-task common errors are generally RDBMS related issues, but could be caused by a problem with SQL*Net, or an application (i.e. Pro*C).
    ORA-03106
    ======== Possible reasons for the ORA-03106 errors include:
    1. Incompatibilities between the client application and the RDBMS server.
    For example, version incompatibilities, or a client trying to use a feature not supported by the database kernel.
    2. When using database links or gateways.
    3. Network or SQL*Net problems.
    4. Corruptions.
    5. PL/SQL - language related.
    check the NLS_LANG variable on the client and server.

  • Skyp file transfer on LAN slow for windows and Mac...

    Hi,
    We are extensively use skype and since we upgrade skype to 6.18 and above ... file transfer on LAN is super slow... to transfer file 200MB it took over 15 minutes but when i'm skype 6.16 it took about 45 seconds... can anyone lemme know to fix it or tweak it on both Mac and windows so i can speed up file transfer on LAN....

    I've been experiencing the same issue. I keep having to downgrade to 6.16 and cancel automatic updates for this same reason. It's really frustrating as my work involves sendig and receiving files via Skype. Versions 6.18 and up not only are too slow (a large file, for example, that would normally take 18 hours or less to transfer takes 1 week! on 6.18 and higher) but also slow down my whole connection while surfing. 6.16 allows me to transfer at a fast speed and I can watch videos and have a 256k livestream radio going, be on a skype call and still have enough speed to download from the Internet without slowing anything down. This is completely unacceptable. I see that no one has replied to this and nothing has been done to fix this issue. I wonder if Skype even browses through these. 

Maybe you are looking for