File Transfer File Failure Question

Hi - I need to transfer my website to another host. As I'm downloading my files, I usually get some errors on some files that did not transfer. Sure I get a log that says which ones, but do I have to actually go and choose them individually to attempt the download again? Or do the entire directory again? Both are time consuming when you would think you would have an option to just have dreamweaver attempt to download the failed files?!?
Thanks for any help!

Hey thanks for the reply Cowboy! I'm in AZ as well!
I checked my .htaccess file permissions and all looked good.
I also tried transferring the same directory again, and different files are erroring and the ones that errored before I successfully transferring. I think I'm having connection problems and think that may be the only reason. That's why I would like to just select the files that didn't xfer quickly with one button action because Dreamwever knows which files because it tells you in the log. Right now, I either have to transfer the entire directory again or go find up to 80 files in different directories not transferring. I want to be sure I get all the files too because I'm moving host servers and can't take a chance that I don't notice a missing file until it's too late.
So does anyone know if such option exists in Dreamweaver?
K, Thx Bye!

Similar Messages

Oracle.forms.webutil.file Transfer.File Transfer bean not found

I've followed tons of instructions for 2 days to install and configure webutil and I finally have success with the demo. However, when I add this to my own form and use the CLIENT_IMAGE.READ_FILE_IMAGE
I end up with error oracle.forms.webutil.file Transfer.File Transfer bean not found WEBUTIL_FILE_TRANSFER.getMaxTransfer will not work.
What am I missing? Thanks for any help.

Make sure your form subclasses object group webutil.olb, and that webutil.pll is also attached. Make sure that your forms folder contains webutil.plx (a compiled version of webutil.pll). Unless the default config (in formsweb.cfg) includes the entries required for webutil support, you must specify a config that does have these entries. 10g, which comes configured for webutil, provides a config called webutil for this. An example URL might look like:
http://myappserver/forms/frmservlet?form=myform.fmx&config=webutil
There could be other problems, but since you're able to run the demo forms, I'm guessing that what I've mentioned are the first things for you to check.
Hope this helps,
Eric Adamson
Lansing, Michigan

BT File Transfer: Files with "&"s cause reception failure

Hi,
I'm using a Satellite A200 with the latest BT Stack (5.10.06T). File transfer is fine, unless the file has an ampersand (&) in it... Is this a known bug? Is there a fix due? It's incredibly annoying!
Cheers,
Greg

Update: After further investigation, the problem is actually with files containing apostrophies. They get converted to the xml litteral ''' and then presumably the stack can't download the file as it doesn't exist with that name.
Sorry for the mistake... can anyone advice if this is a known issue or is due to be fixed? :)
Cheers,
Greg

WebUtil File Transfer - file size limit

Does anybody know what the file size limit is if I want to transfer it from the client to the application server using WebUtil? The fileupload bean had a limit of 4 Mb.
Anton Weindl

Webutil is only supported for 10g. THe following is added to the release notes:
When using Oracle Forms Webutil File transfer function, you must take into consideration performance and resources issues. The current implementation is that the size of the Forms application server process will increase in correlation with the size of the file that is being transferred. This, of course, has minimum impact with file sizes of tens or hundreds of kilobytes. However, transfers of tens or hundreds of megabytes will impact the server side process. This is currently tracked in bug 3151489.
Note that current testing up to 150MB has shown no specific limits for transfers between the database and the client using WebUtil. Testing file transfers from the client to the application server has shown no specific limit up to 400Mb; however, a limit of 23Mb has been identified for application server to client file transfers.

WebUtil file transfer in multiple user implementation

Hi
Installed WebUtil and able to integrate forms/reports in Web enviroenment 10gAs.
Around 30 to 40 people will use this application, Now to do client side integration (To Save generated output to Cleint m/c) we are geerating file on AppServer and transferring using Webutil file transfer but my question if multiple users running same report from form and generates two different date ranges to generate to same file on Appserver, How Can I use WebUtil file tranfer for two people running same report. Is that going to be problem in concurrent user environment.
Setup 10gAs, User A select report A and run with two different data ranges and file saved on Appserver as test.pdf and now user b want to run same report with time range little bit different time range and file has to be saved to same test.pdf on ApopServer, Now how oracle going to handle this ???????.
Pl answer this is very important as we are running this reports in Web implementation with more than 30 users.
Many thanks in advance.
Murthy

Surely the real issue is that you are always generating to the same filename? Incorporate an identifier into the filename. e.g. the username
Regards,
Robin Zimmermann

Thanks.. can u please help me out in one more question. how can i transfer files like pdf, .docx and ppt from my laptop to iPhone 5 ? please its urgent.

thanks.. can u please help me out in one more question. how can i transfer files like pdf, .docx and ppt from my laptop to iPhone 5 ? please its urgent.

See your other post
First, i want to know how can i pair my iPhone 5 with my lenovo laptop?

Questions on file transfer capabilities

1. We have a need to move files (multi-mega bytes) from one Unix system to another. 'GetFile' and 'PutFile' seems to use Tidal Windows system as a go between. Is there a way to accomplish unix to unix file transfer without going through Tidal Windows system?
2. When we execute a script using 'Execute Terminal Command' activity, the output of the execution is captured in the activity's 'output' buffer. Won't this buffer overflow when it attempts to capture multi-megabytes output? Assuming it overflows, is there an alternative? If it doesn't overflow, then is there a limit to the multi-megabytes that can be captured in the 'output' buffer?
3. Does Tidal support browser based GUI?
thanks.

1. Probably need dev input on this... the activities do have to run on the orchestrator server
2. the buffer should be ok I think, i've never seen anyone "break" it, but if you do, open a ticket and we can work with dev
3. CPO has a web console. by default it should be @ :2081/TEOWebConsole">http://:2081/TEOWebConsole
The webconsole is a "toned" down version of the master UI.

HT201413 2 part question: First how can I place/transfer files from itunes to an andriod device, second, why is it that EVERYtime I install an upgrade or reinstall old files saved on an external drive, the files get corrupted or songs shortened/ or don't

Dear Apple Corps;
I have an issue with your software on my PC and iPad, iPod, and shuffle! Everytime I download and update or try to reinstall files after having my computer "scrubbed" they either won't open, can't be found or work poorly. WHY???? I have been through alot of this over the last 3 years, and I am tired of files safely and securely transferred becoming corrupted or unusable or just plain deleted. Please come back with and answer. I also have invested heavy into iTunes files downloaded from the iTunes store, so how can I safely store a remote copy(s), to reload onto my cleaned hard drive or to a new device Apple or PC????????????????????????????????????????????????????????????????????????????? ?????????????????????????????????????!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!
Tired of wasted time manually loading files I should be able to use off a stored copy.
Richard Dreyer
[email protected]

"Den B" wrote in message news:9528356a-7e8f-45bf-9eee-30b40b5df4aa...
Some strange glitch has erased every single unlocked & unprotected file on my C: drive. It wasn't a virus because I checked autorun records and running processes using the respective Sysinternals utilities and didn't find anything suspicious.
I restored all data except for some system files and files that had "too long" of a path using shadow copies, which luckily for me were just a few hours old. Then, I decided to reboot into Recovery Environment and run System Restore from there. For even
more strange reason, the available restore points in RE were dated November 2010 (it's May 2012 right now) and the recent save dates are nowhere to be found.
To make matters worse, SFC doesn't work and Safe Mode shows BSOD after loading CLASSPNP.SYS.
Error messages so far:
RE's startup repair tool: System files integrity check and repair error code 0x2
SFC: Windows Resource Protection could not perform the requested operation
BSOD: 0x7B (0xFFFFF880009A9928, 0XFFFFFFFFC0000034, 0x0, 0x0), but the HDD is perfectly fine - it's a dual-boot machine
CBS.log: Failed to get CSI store. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
What I need is a way to perform either an in-place upgrade without booting into Windows, or a way to fix the SXS Component Store, or rebuild the Safe Mode so that I could initiate upgrade install from there. A clean install isn't an option because I don't
have the luxury of time to run through the reboot cycles when re-installing and updating other software (I'm using Windows 8 CP for now as my work tools are mostly in the cloud).
It is not possible to do a repair install of a system unless you can boot to the system.
Have you checked the hard drive for problems? - download the manufacturer's test utility, create the disk, and run the extended checks.
Noel Paton | Nil Carborundum Illegitemi |
CrashFixPC | The Three-toed Sloth

File transfer from UNIX server to Windows server path

Hello Experts, (Gud Even Gud Aft & Gud Mor)
Is there a way to transfer file from UNIX server(Oracle database), to Windows server? All I know if Windows path. I am able to read the file as it is on server, however it does not recognize Windows directory at all.
If you can share some documents around this to study, I will be grateful.
Regards,

34MCA2K2 wrote:
Is there a way to transfer file from UNIX server(Oracle database), to Windows server? All I know if Windows path. I am able to read the file as it is on server, however it does not recognize Windows directory at all.Yes it is possible. Samba on Unix sharing the directory containing the file. NFS on the Unix server sharing the directory containing the file. FTP server on Unix allowing the file to be read and copied. OpenSSH on the Unix allowing the file to be read and copied via scp (secure copy).
But seeing as this is an Oracle database forum (not an operating system forum), and the subject matter is the database server languages SQL and PL/SQL, here is a PL/SQL solution.
Create a table using the BFILE data type for referencing the files on the Unix o/s. Provide a web enabled procedure for downloading the files via HTTP using a web browser. This procedure will look something as follows:
--// URL example: http://my-server.my-domain.com/MyDAD/MySchemaName.StreamFile?fileID=1234
create or replace procedure StreamFile( fileID number ) AUTHID DEFINER is
        mimeType        varchar2(48);
        fileName        varchar2(400);
        lobContent      BLOB;
begin
        --// read the LOB from a table (this example uses the
        --// Apex file uploads table - change it to your own files table)
        select
                f.filename,
                f.mime_type,
                f.blob_content
                        into
                fileName,
                mimeType,
                lobContent
        from    FLOWS_FILES.WWV_FLOW_FILE_OBJECTS$ f
        where   f.id = fileID;
        --// format a basic HTTP header that describes the file stream send
        OWA_UTIL.mime_header( mimeType, FALSE );        -- e.g. text/csv text/plain text/html image/gif
        HTP.p( 'Content-Disposition: attachment; filename='||fileName );
        HTP.p( 'Content-Length: ' || DBMS_LOB.GetLength(lobContent) );
        OWA_UTIL.http_header_close;
        --// now write the BLOB as a mime stream using the Web Procedural Gateway's
        --// doc load API
        WPG_DOCLOAD.download_file( lobContent );
exception when OTHERS then
        --// Decide what HTML to generate (if at all) if there is a failure
        --// (usually not a good idea to show database errors to the
        --// web browser client as that can provide technical details
        --// that could be useful for exploiting the database)
        HTP.prn( 'StreamFile() failed with '||SQLERRM(SQLCODE) );
end;
/ On Windows, IE can be used interactively to copy the file across. For automation (via PowerShell or console jobs), use a command like tool like wget* to download the file.
If you do not want to use SQL or PL/SQL as the file copy mechanism, then please close this thread (mark as answered) and take your question to an appropriate forum.
<i>* - see http://gnuwin32.sourceforge.net/packages/wget.htm</i>

Getting a new Mac: need to transfer files/applications, have external hard drive, and wipe clean old Mac to give to family member

Getting a new Mac this Christmas. I have several questions:
1. How do I transfer files/applications from old to new?
2. I have an external hard drive, do I need to save iTunes account to it?
3. How do I wipe the old Mac clean to give to family member?

1. Use the Migration Assistant the first time you turn on the new computer.
2. No, but you should do so as a backup.
3. Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C or Option key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(118241)

How to transfer file from one client to another client?

hello,
i have some questions and hope you all can help me..thanks a lot first..
Here are the questions:
i) How can i send a file from one client to another client using RMI?
ii) Does the client(sender) need to send the file to server, then server save it and then send it to another client(receiver)?
iii) If using RMI, a client can receive two files from same client(sender) or different client(sender) at a same time? how to do it? when both of the files come in from same port, how to differenciate them?
iv) For your information, i am doing the File Transfer Server-client application which sender can send any file to other client. Can you give me any ideas? thanks..
Last, thanks again..

Your questions reflect some ambiguity in terms.
"Client" and "server" are commonly used in two different senses:
1. Technical sense: A client process makes requests, and a server process fulfills the request (provides a service).
2. IT sense: A client computer (process) makes requests of a server (computer) process, and the server (computer) processes the request.
In the first case, any computer might be a client, or a server, or both, depending on the processes being executed. In the second case, the computers are assigned some role.
So: If you wanted to, you could implement client/server processes communicating between two peer computers, using RMI.
This may not be what you wanted; if you really want to distinguish client and server computers, then the answer is that yes, you will probably put files into intermediate storage on the server computer.
Finally, you probably do not have to worry about port conflicts if you use RMI; while the initial client server contact is established through a registry operating on a standard port, the actual RMI communications is established using random ports, one for each link.

I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

How to achieve the maximum file transfer rate from PXI to local host?

I will have to copy a huge amount of data (as big as 50 GB) from a PXI-8106 unit on site to a laptop. Currently it would take several hours. It is critical to max out the data transfer rate.
The standard method we've been using is just drag and drop using Windows Explorer via FTP. I tried to use FTP VIs with Filezilla Server as well but the transfer rate is only like 1.5 MB/s. Is this normal? Once I saw it was 3.0 MB/s but for some reason, that isn't happening now.
For another option, I tried to transfer data to a USB flash drive but it's even slower. As far as I know, USB 2.0 transfer rate is supposed to be around 60 MB/s but why would it be slower than 1.5 MB/s? What could be the speed limiting factor in my file transfer setup?
Any tips on improving file transfer rate would be appreciated!

Sustained 40 MB/s? That is my dream speed! The maximum speed I've ever seen here was about 25 MB/s, which is still very good, and that happened only after copying back and forth, which I explained above. Let me go through what I did with screencaps first.
These are the test tdms files to transfer in the PXI: an original file witten in the PXI and its copy file. I copied the original file from PXI to laptop and renamed it (added '_copy') and then copied it back to PXI.
FTP module is transferring the original file to the Filezilla server on laptop. Note the low speed.
FTP module is transferring the copy file to the Filezilla server on laptop. Note the higher speed.
This is the FTP sub VI I'm using. It transfers files in sub-folders (one level lower), too. The data connection is set to 'passive' on the FTP Put Multiple Files VI but it doesn't seem to make any difference. I attach the sub VI.
You tried the file transfer with a 500 MB text file. Would there be any difference if the file type was tdms? Would the RAM size matter? It is 2GB here.
And the LED is orange, which means Gigabit.
Another question: Is there any way to programmatically stop file transfer in progress? Currently, I just have to restart the PXI.
Thank you!
Attachments:
FTP.vi ‏40 KB

When upgrading to OSX Yosemite do all my programs and files transfer over such as Office for mac, saved documents from word,excel,pics,pdf files,etc.etc...

Will all my files transfer over (or stay) automatically right after upgrading to Yosemite or do I have to backup every single desired program or document? Question is do I HAVE to please if you can answer if its mandatory or not. Not looking for recommendations that I SHOULD back up or anything like that just want to know if it is mandatory to perform a backup to be able to keep or transfer all my current programs and apps and documents currently on my MB Pro Retina.

Yes, upgrading to Yosemite will not touch your 3rd party apps or files in the Home folder.
Although not mandatory you should have a a backup of your hard drive regardless if you upgrade to Yosemite or not. To not have a backup is just playing Russian roulette as there are only two types of hard drives; those that have failed and those that will.

How do I transfer files mac to mac manually?

I am trying to transfer files from one mac to another mac. The older mac was not backed up to external drive so doing this via ethernet cord. Note that I did successfully replace my new mac with the old mac configuration via Migration Assistant. However that is NOT what I wanted to do. I do not one all the apps and other files that are on the old mac only select files and no apps. So I was able to recover a day earlier so my new mac is back to being new. But now I am at step zero.
So my specific questions are do I need to use Migration Assistant? And if I do how and where in the process do I relay that I only want select files? If I do not have to use Migration Assistant then what is the process for transferring the files. I see the option for sharing but will that save the files to the new mac?
Thank in advance for your detailed response.

Can you connect the two using Firewire? If so, then you can boot the old computer into Target Disk Mode and access the drive directly. No need for a working screen.
Here's the setup on my system:
You will find the above configuration in the Sharing preferences panel.

File Transfer File Failure Question

Similar Messages

Maybe you are looking for