File transfer from FAT disk not working properly

Hi all,
I have a MacPro with 4 HDD, one of them partitioned with a 300 GB FAT disk.
Using BOOTCAMP / VISTA 64 I copied files to this disk, but I can't access these folders without errors. Reformatting of the partition didn't solve the problem, somehow I keep getting sort of time outs while accessing the drive.
In brief:
- if I try to copy files from the FAT partition onto a HFS+ partition I often get breakdowns, the copy process is stopped due to read errors
- same if I want to write on the disk
Any hints? Thanks
Christoph

File is timeline in Final Cut Pro 5.1.4 on PowerPC.
Isn't Final Cut Pro a Mac program and not likely to be compatible on a windows computer? What is a PowerPC?

Similar Messages

  • My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    You need to get some software that allows your Mac to read and write to the NTFS disk.  There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free.  I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac.  You don't need NTFS anymore, unless you still have a Windows computer that needs it.

  • File Transfer  Mac to Windows not working

    QT file sent from my Mac not opening on Windows XP. Windows redirects to download 3rd party application page. ??
    File is timeline in Final Cut Pro 5.1.4 on PowerPC. Exported as Quicktime movie. Saved as .mov file. 1.2gb. DVCPRO 50 HD 720p. Quicktime Pro 7.6.4. Vista Machine also has QT 7.6.4
    Any ideas? Have you had this problem? I dont' get it. A QT file that won't open on in another QT? Or is it having an old FCP?
    Never had an issue with QT files before, but I haven't transferred them around a lot either.

    File is timeline in Final Cut Pro 5.1.4 on PowerPC.
    Isn't Final Cut Pro a Mac program and not likely to be compatible on a windows computer? What is a PowerPC?

  • I have noticed that when using Tigers Dosk utility to ERASE a flash drive I have a choice of FAT but not FAT32.  It seems that flash drives formatted as FAT do not work properly when trying to copy files from a Windows machine.  Why?

    I have noticed that when using Tigers disk utility to format an external USB flash drive I only have the choice of FAT ( when formatting for use on a Windows machine ) and not FAT32.   I have found that USB FLASH drives formatted as FAT do not always work on Windows machines.  Why?  How can I use Tiger to format for FAT32?

    I think it depends on the size of the Flash Drive as to whether it uses FAT16 or FAT32.
    Can you format it FAT32 on the PC?
    Other options would be NTFS or Mac OS Extended...
    NTFS-3G Stable Read/Write Driver...
    http://www.ntfs-3g.org/
    MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
    http://www.osnews.com/story/16930
    MacDrive for the PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/

  • File Upload UI element is not working properly inside Table Popin container

    Hi Expert,
    I created a table with popin, i placed file-upload UI element inside table popin contatiner.
    The file upload UI element is displaying properly but, when i click the browse button to select  the file, the file open dialog box is not popping out.
    will table popin support file-upload UI element inside it?
    it not is there any other way to call a file_open dialog box from inside the table popin.
    Thanks,
    James

    If you are on NetWeaver 7.01, you can try both the ACFUpDownload UI element or try creating your own FileUpload in Adobe Flex with Flash Islands.  ACFUpDownload requires the KPRO by default (which is why the same application isn't working for you), but you can write your own handler class to act as the KPRO receiver.  Here is an eLearning on the topic:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/109b9b52-bc00-2c10-8786-e4c5e96d7e04
    and source code:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70645070-bb00-2c10-f086-f126721acdb4
    If you want an eLearning on the FlashIslands approach, you can find it here as well:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d42644-91ef-2b10-228c-9e0ae75b274e
    and Source Code:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f044b62c-90ef-2b10-64a6-9ec25294d133
    However in both of these approaches you still have to be careful with how you handle large files.  The problem is that they are processed often a single binary string.  This makes the processing easy, but requires total amount of session memory at least as large as the file being uploaded.  In NetWeaver 7.02 ABAP adds the concept of Streams and Locators to help with the partial processing of large files.  This feature doesn't come until later this year, but if you are interested you can learn about it here:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f983df-213e-2c10-ba89-b5a12ef178e8

  • Rollover slidelet from captivate 4 not working properly in 5

    hey guys,
    I'm using rollover slidelet for a presentation that shows video that is convereted to the proper file type.  I've uploaded to my site an it works fine.  But when I put the file into 5 the videos do not play when I put it on my site just can hear the audio.  I've made sure the skin is uploaded properly.  What could be the problem.  I've also noticed when i go from 4 to 5 some of my captions have to be expanded in 5 to show all of the text.  Can someone please help me out with this....i can't figure this out.

    Let me explain this better. When I click on an audio clip in the timeline I get this prompt:
    No default transition to add. Please set a default transition in the Effects Tab in the Browser before performing this command.
    I've never had to do this before, so I wonder if anyone knows why this suddenly is happening?
    L.

  • File Sharing on the Network not working properly

    Hoping someone can help and not really sure if its the right place to ask but I am totally at a loss so thought I would give it go. Technically it is an issue with logging onto the Shared Folders from a Media Player but not sure if the issue has been caused by settings on the Mac.
    I have an IMAC with shared folders that can be accessed on a network. Can be accessed fine by all users.
    I also share the folders with a Philips Media Player HMP/5000 which allows you to stream media via wifi from your network. I have had no issues with it streaming from the Mac up until yesterday when I upgraded to Maverick Operating. System.  Now when I try to access the shared folders the Philips Media Device wants a Network Login and Password which it never wanted before. I changed none of my file sharing permissions and everything is as it was. I don't understand why all of a sudden it wants a network login. I have tried my user name and password for my Mac but that doesn't work.
    Nothing in the UserGuide for the Media Player talks about this. I contacted Philips and they said it is an issue with my computer not letting me access the files.
    I am wondering if the upgrade to Maverick has somehow changed some sort of settings somewhere which no longer allows this device to access the shared folders?
    My file Sharing is on and states that everyone has access. My firewall is turned off.
    Anyhelp would be greatly appreciated.

    Although not directly an answer to your question, I recommend you use a wifi router to allow all your devices to get onto the Internet. I never recommend using Internet Sharing with a computer. Sorry I could not directly answer your question.
    That said, someone will be along to help you with Internet Sharing.

  • Transfer Function Block Component not working properly

    When using a Transfer Function Block, and you enter in the polynomial coefficients for a simple RC Passive Low-Pass Circuit, and perform an AC analysis side-by-side to its circuit equivalent, it works great.  The 2 frequency response waveforms are identical.  However, when you add another RC Low-Pass section in cascade with the 1st one, making it a 2-pole RC Passive Low-Pass Circuit, and you put its polynomial coefficients into the transfer function block the results of the AC Frequency Response is not identical to its 2-pole circuit equivalent.  I double checked my math to make sure my transfer function math was correct.  Since 2 transfer functions are in cascade, the transfer function from the 1st RC stage is multiplied times the transfer function of the 2nd RC stage, and the result is the overall transfer function.  I even went as far as creating 2 transfer function blocks, each of them, with a single RC transfer function and connecting them in a cascade fashion.  The results were the same....the trasnfer function block(s) do not resemble their circuit equivalent models for a >=2pole Passive RC Low-Pass filter.

    The transfer function of a RC ist not retroactively-free, this is the reason why the transfer function of 2 RC Circuits is not 1 / (1 + RC*s)^2 ! You can not multiply the one function of one RC with the other!
    You have to solve the differential equation of the RC circuits, to get the real transfer function.

  • .mov file saved from other Mac not working on new Macbook

    My old Macbook Pro started acting funny so I saved all my pictures and videos to USB drives. My new Macbook (OSX 10.5.8) with QuickTime (version 7.6.4) will not open the .mov files. Per another similar thread it was suggested to enable the "Show legacy encoders" under QuickTime Advanced Preferences, but it still won't work. QuickTime opens and plays the file but there is no sound or picture? Any suggestions?

    My old Macbook Pro started acting funny so I saved all my pictures and videos to USB drives. My new Macbook (OSX 10.5.8) with QuickTime (version 7.6.4) will not open the .mov files.
    Not sure what you mean here. Did you use the "Save As..." option to save the files as "Reference" movies to the USB drive? If so, they can't open because the "Standalone" reference file is not available on the mew system for playback.
    QuickTime opens and plays the file but there is no sound or picture?
    Confused here. Which is it? "QuickTime (version 7.6.4) will not open the .mov files" or "QuickTime opens and plays the file but there is no sound or picture?"
    Codecs: DV/DVCPRO - NTSC, DV, Tween, Integer (Big Endian)
    What QT application are your referring to here? A "Tween" track is not usual for captured DV/AIFF content and would probably cause problems with an application like iMovie '08/'09 which don't like all possible MOV container track types.
    That's unusual, there is no Format information available. Just 1)source, 2)data size, 3)data range, 4)current time, and 5)duration.
    Sounds like corruption in the file, the QT embedded structure or the QT player. If the "small" files (like MPeG4/AAC) play okay, and only large ones (like DV/AIFF) have problems, then you may wish to check the USB drive format for file size limitations, data integrety, and/or other problems.

  • Importing photos from Photo Stream not working properly

    I've been trying to work out a way to import photos on my iMac and have Photo Stream push them to my MacBook so they end up in the same Event on both computers. If I have Automatic Upload turned on, the photos I import on my iMac get uploaded to Photo Stream before I get a chance to place them into my intended Event. So I tried turning Auto Upload off, importing photos, placing them into their proper Event, turning Auto Upload back on, and then dragging them to Photo Stream to upload them.
    First, it seems like there should be an easier way. But also unfortunately, even though Help in iPhoto 11 (9.2) seems to say this should work (see below), my photos end up in my MacBook's Photo Stream folder, but not in the Event (with Automatic Import turned on on my MacBook). This is what is written in the Help documentation -
    Note:  If iPhoto automatically imports a Photo Stream photo that was originally uploaded from a different iPhoto library, or from an Aperture library, iPhoto adds the photo to the Event that matches the one in the original library. If a matching Event isn’t in the destination library, iPhoto creates a new Event with the same name.
    I wasn't able to find the photos anywhere in my MacBook Events. As indicated in the note above, they should have been automatically placed in a matching Event of the iMac's library. Any help is much appreciated.

    Ever since I went to the cloud all of my new photos have show up in photo stream. I had hoped it would sync and update the events in Photos, no luck. I also uploaded a numbers document to iWork and and could only access it through Safari. The only option I had to actually open it on my iPad was 'open in iBooks'. Really! There's been other occasions of rocky starts so I hope iCloud improves. It has too.

  • File transfer in home sharing not working

    My wife and I are running the latest version of iTunes on two different Macs. We are both logged into the same iTunes store account. We can stream each others music to our respective Macs, but we cannot drag music files from one Mac to the other as one is supposed to be able to do with home sharing active. Any thoughts?

    Nevermind...went digging and found out that my wife had changed her home share settings to her itunes account and did not tell me.

  • "reopen all windows from last session" not working properly

    Sometimes I will hit a wrong tab and lose all the tabs and pages I am working on.  But when I hit "Reopen All Windows from Last Session" in History, I either get pages from months ago, or some nonsense that Apple is apparently trying to get me to buy.  All I want is my old work up.  How can I get them back quickly and easily (which is what I thought "Reopen All Windows..." was supposed to do)?

    Manual method
    Malware – Adware removal – Apple Support
    Or download this program which was written by Thomas Reed, a long time poster. The program will do the work for you which makes it easy. If you are uncertain about downloading programs, try the manual method.
    Malware Guide – AdwareMedic – 10.7 and higher

  • Workflow - document from template step not working properly

    Hi All,
    We are creating a document from the step "Document from a template" in our workflow .
    This document is then given to the user as an attachment to a user decision step where he modifies that document.
    These modifications to the document are stored in the workflow.
    However if i want to give the same document to another user in another user decision, it gives only a read-only copy to him. Is this how a document from a template works or is there some bug in my coding or a possible workaround
    Thanks and regards,

    Hi Amit,
    Have you tried option from menu Document -> load other version , when user opens work item for document from template?
    I think this should serve the purpose of making document editable for other users.
    Hope this helps.
    Regds,
    Akshay Bhawgat
    PS: Some points would be nice if it helps:)
    Message was edited by:
            Akshay Bhagwat

  • File Check-in/check-out not working properly

    I recently upgraded to Dreamweaver CS3 (the entire web wuite)
    and have recently lost the ability to check files in to the remote
    server. It allows me to check out files but prompts whether I want
    to View Only or Make Writable. The Enable File Check-in/Check-out
    is toggled on in site preferences because I have a couple of
    Contribute users. I reinstalled Dreamweaver in an attempt to
    correct but it did not. Has anyone else experienced this problem or
    have any ideas about troubleshooting and fixing? thx

    Hi,
    Yes I have.
    In my Track data,it is showing:-
    Software Components (SC)
    Software Components for development
    BP_ERP4ESS        Release 60.1
    BP_ERP4MSS       Release 60.1
    NWDIDEMO           Release 1.0
    Required Software Components
    SAP_JEE                    Release 7.0
    SAP_BUILDT               Release 7.0
    SAP_JTECHS              Release 7.0
    but still the check-in tab is greyed out.
    Kindly please suggest some solution.
    Regards
    Saurabh

  • Unlocked IPhone 4 from Apple is not working properly on Rogers

    I bought IPhone 4 bacjk in May 2011 from Apple was Unlocked. I am using it on Rogers. Since I have updated to IOS 5.0. I am having a weared problem. I daily commute to downtown Toronto using Subway. When I come to Street level and waited for sometimes 2 hours My phone says searching or no signals. I have tried everything per Rogers It is a hardware issue so Apple swopped my phone 3 times. I have changed my SIM card two times. No luck. I have tried enabling 3G on or Off or aeroplane mode On & Off as well. Evertime I need to swicth my phone Off and On to get back to Network. Yeaterday I was at Rogers store they told me because I have bought it unlocked from Apple it did not have the settings and Rogers software on it that might be causing the issue. Any help on this will be appreciated...

    http://discussions.apple.com/thread.jspa?messageID=12241341#12241341

Maybe you are looking for